Engineering Commons^™

Cross-Linking Amyloid Forming Proteins For Improved Understanding Of Early Aggregation, Gram Booth

Chemical Engineering Undergraduate Honors Theses

Alzheimer’s disease is the only disease in the ten leading causes of death in the United states that cannot be slowed, prevented, or cured. Alzheimer’s dementia and type II diabetes are the top two diseases caused by improper protein folding, aggregation, and deposition of fibrillar plaques in tissues. These plaques, originally thought to be the cause of these diseases, have been discovered to be mostly benign and representative of the later stages of the disease. The smaller, more soluble oligomeric aggregates are responsible for the death of pancreatic and neural cells. Many oligomeric species are unstable and exist only for …

A Proposed Process And Economic Analysis For A Manufacturing Facility For Nylon 6,6, Perry Doles

Chemical Engineering Undergraduate Honors Theses

The global nylon market is a multi-billion-dollar industry that has been thriving in recent years due to advances in the process technology and its flexibility as a material. Nylon 6,6 is a versatile material with uses in many industries because of its ability manipulated into many forms. It is commonly used in applications that require heat resistance, chemical resistance, and high mechanical strength. It is commonly used in luggage, car parts, carpets, and many other plastic products that require the properties that nylon 6,6 exhibits. The versatility and demand for nylon 6,6 make it an attractive process for many potential …

Thermal Removal Of Carbon Dioxide From The Atmosphere: Energy Requirements And Scaling Issues, Ted Von Hippel

Publications

I conduct a systems-level study of direct air capture of CO2 using techniques from thermal physics. This system relies on a combination of an efficient heat exchanger, radiative cooling, and refrigeration, all at industrial scale and operated in environments at low ambient temperatures. While technological developments will be required for such a system to operate efficiently, those developments rest on a long history of refrigeration expertise and technology, and they can be developed and tested at modest scale. I estimate that the energy required to remove CO2 via this approach is comparable to direct air capture by other techniques. The …

Biocompatible, Responsive Polysoaps Via Raft Copolymerization For The Delivery Of Model Cancer Therapeutics, Mason Dearborn

Honors Theses

Many chemotherapeutic drugs are small, hydrophobic molecules that require water-soluble, biocompatible nanocarriers for enhanced vascular circulation. Existing polymeric carriers either conjugate the drug along a copolymer backbone or sequester drugs within a protected interior domain to be delivered to specific sites in the body. Such therapeutic systems must overcome a myriad of hurdles, beginning with complex, multi-step syntheses, followed by other inherent barriers that limit the efficiency of drug delivery at the targeted site. This work aims to circumvent a number of these issues using biocompatible, stimuli-responsive polysoaps that are capable of unimeric micelle formation, hydrophobic drug delivery, and triggered …

Biodegradation Of Phenolic Components In Wastewater By Micro Algae: A Review, Muthanna H. Al-Dahhan, Faris Hammoodi Al-Ani, Adaf Jadaan Obaied Al-Saned

Chemical and Biochemical Engineering Faculty Research & Creative Works

The biodegradation of phenolic contaminant present in wastewater by micro algae has been investigated in the current research. The study focused on algae growth requirements and factors affecting algae growth in contaminated water leading to the best treatment. Different techniques used to functionalize microalgae in the treatment such as batch and continuous operation modes have been further investigated. Mechanisms for microalgae pollutants degradation and microalgae growth kinetics were also highlighted to present the required knowledge in phenol contaminant biodegradation field by microorganisms.

Characterization Of Bacteriorhodopsin And Halorhodopsin Reconstituted In Lipid Bilayer Membranes, Joel Domkam Kamwa

Graduate Theses and Dissertations

Motivated to produce electricity with photon activated ion pumps, the main purpose of this work was to characterize the photosynthetic membrane proteins bacteriorhodopsin (proton pump) and halorhodopsin (chloride pump). The proteins were re-suspended in lipid bilayers. For this work, an experimental set-up was built which included: chambers for lipid bilayer formation and characterization, lasers for ion pump activation, and an AxoPatch electrophysiology system for small photocurrent measurement. Lipid bilayer membranes were formed using mostly folding method: folding two monolayers together. The membranes were characterized by their resistance, capacitance, and generated photocurrent. Photocurrent was generated upon illumination of lipid-protein membranes with …

Polymer Nanocomposites Containing High Aspect Ratio Particulates: Innovation In Co-Extruded Multilayer Barrier Films, Kevin Meyers

Dissertations

Delaminated montmorillonite (MMT) clay/ maleic anhydride grafted LLDPE nanocomposite multilayer films with alternating layers of LDPE were produced through multilayer co-extrusion. The MMT concentration within the nanocomposite layers was increased through annealing the films in the melt due to a mismatch in interdiffusion rates of the polymer layers. Analysis of the nanocomposite layers upon annealing revealed that the platelets impinged upon one another resulting in significant improvement in oxygen barrier in the multilayer system, exceeding the results of bulk nanocomposites.

Model analysis demonstrated that increasing the nanoplatelet aspect ratio or initial concentration in the filled layers would lead to even …

Comparison Between Cold/Hot Smart Water Flooding In Sandstone Reservoirs, Hasan N. Al-Saedi, Ariel Williams, Ralph E. Flori

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The incremental oil recovery has been investigated and approved by many laboratory and field projects using water flooding in tertiary stage. The salinity of the injected water is an important factor observed by many researchers. The more salinity decreases the more oil recovery obtained. The investigations on the hot low salinity water flooding have been conducted by many researchers and they found out that it is useful for increasing oil recovery especially heavy oil due to reducing oil viscosity and make it easy to produce to the surface. The thermal expansion of water plays an important role in the incremental …

Synthesis And Electrochemical Properties Of Li3V2(Bo3)3/C Anode Materials For Lithium-Ion Batteries, You Wang, Yi-Wen Zeng, Xing Zhong, Xing Liu, Quan Tang

Journal of Electrochemistry

The Li₃V₂(BO₃)₃/C (LVB/C) composite materials were successfully synthesized in two steps:Firstly, a stoichiomertric mixture of Li₂C₂O₄, V₂O₅, H₃BO₃, H₂C₂O₄•H₂O and ethanol was thoroughly ball-milled to get the precursors. Secondly, the precursors were post-calcinated to get the ultimate products. The calcination temperatures of 750 ℃, 800 ℃ and 850 ℃ were selected based on TG-DTA analyses. The crystal structures, surface morphologies and carbon contents of the samples calcinated at five conditions, …

Preparation Of Co3O4/Ti Electrocatalytic Membrane Electrode For Catalytic Oxidation Of Benzyl Alcohol, Yu-Mei Zheng, Zhen Yin, Hong Wang, Jian-Xin Li

Journal of Electrochemistry

The cobalt oxide(Co₃O₄) nanoparticles were loaded on microporous Ti membrane to prepare Co₃O₄/Ti electrocatalytic membrane electrode by dip-coating method. The microstructures and electrochemical properties of Co₃O₄/Ti electrocatalytic membrane were investigated. The Co₃O₄/Ti electrocatalytic membrane reactor (ECMR) assembled by using the Co₃O₄/Ti electrocatalytic membrane as an anode was adopted for catalytic oxidation of benzyl alcohol to produce benzaldehyde and benzoic acid.The effects of different operation parameters on benzyl alcohol conversion, and selectivity to benzaldehyde and benzoic acid of ECMR were studied. …

Electrochemical Oxidation Of P-Chlorophenol On Porous Ti/Bdd Electrode Cooperated With Cathode Dechlorination, Rong-Ling Chen, Wei-Min Huang, Ya-Peng He, Jun Shi, Hai-Bo Lin

Journal of Electrochemistry

The electrochemical oxidation of p-chlorophenol on porous Ti/BDD electrode cooperated with synergistic effect of cathode dechlorination was studied. Electrochemical degradation tests of p-chlorophenol were conducted in single and double compartment electrolytic cells separately, and the results showed that the mineralization happened mainly in the anode region. The product of chloride ions produced from the cathodic reduction of 4-chlorophenol in the single cell migrated to the anode region and further generated active chlorine toward electro-catalytic oxidation. At the same time, the chloride ion produced from the cathode of the double cell was difficult to be migrated to the anode region, which …

Simulation Analysis In Dynamic Performance Of Proton Exchange Membrane Fuel Cell Under Starting Condition, Yan Xiao, Ying-Jie Chang, Wei Zhang, Qiu-Hong Jia

Journal of Electrochemistry

Based on the equivalent circuit model, by considering both the dynamic gas pressure model and the dynamic heat transfer model, a lumped parameter model is developed. The start process of the fuel cell is simulated by using SIMULINK software. The undershoot of the voltage is observed from the simulation results, and the response time of the voltage is basically the same as that of the fuel cell temperature, which indicates that the temperature has great influence on the dynamic performance of the fuel cell. From the perspective of the temperature, the dynamic responses of the thermodynamic potential, the activation overvoltage, …

Interaction Between Energy And Electrocatalysis —— A Review On The 1st Young Scientist Forum On Energy Electrocatalysis, Hong Li, Wen-Bin Cai

Journal of Electrochemistry

No abstract provided.

Effects Of Rotating Magnetic Fields On Pem Fuel Cell Performance, Mao-Liang Wu, En-Ze Wang, Guang-De Pan, Zhong-Jun Liu, Fei Xie

Journal of Electrochemistry

Proton Exchange Membrane (PEM) fuel cell performance may be improved by application of additional magnetic fields. In this work, one square permanent magnet, made of either 16 combination cylinder magnets with homopolarity or 16 combination cylinder magnets with heteropolarity, was exerted on the fuel cell surface to produce additional magnetic field affecting PEM fuel cell performance. The influences of magnetic field status (rotating, static and none) on polarization and power density curves measured in a PEM fuel cell were investigated. The results verified the benefit of magnetic field, proving that the magnetic field distribution could improve the fuel cell output. …

Preparation And Properties Of Manganese Oxide And Polyaniline-Carbon Composite Electrode, Tian-Tian Zhou, Bing Wu, Chao Deng, Ying Gao

Journal of Electrochemistry

The polyaniline-carbon (PAnC) electrode was prepared by the polymerization of aniline monomer and activated carbon in ice water bath, and followed by chemical deposition of manganese dioxide MnO₂-PAnC composite material. The specific capacitance of MnO₂-PAnC reached 459 F•g^-1. The cyclic voltammetric results showed a small deformation in the voltammogram curve obtained with the MnO₂-PAnC electrode at high scan rate, indicating good reversibility and capacitive properties. The AC impedance results revealed that the MnO₂-PAnC electrode displayed the smallest charge transfer resistance and the fastest diffusion
rate of surface ions than other …

Preparation Of Ni(Dpim)2Cl2 Complex For The Electrocatalytic Reduction Of Co2, Li-Pu Zhang, Dong-Fang Niu, Xin-Sheng Zhang

Journal of Electrochemistry

A new Ni(dpim)₂Cl₂complex using 2-(diphenylphosphino)-1-methylimidazole (dpim) as ligand was prepared and served as a catalyst for the electrochemical reduction of CO₂. The electrochemical redox behavior of Ni(dpim)₂Cl₂ in CH₃CN/TPABF₄ solution under nitrogen atmosphere showed the two-electron irreversible reduction at -0.7 V and one-electron quasi-reversible reduction at -1.3 V. After bubbling CO₂ into the electrolyte, the reduction peak appeared at -1.3 V became irreversible and the peak current increased from 0.48 mA·cm^-2 to 0.55 mA·cm^-2. Moreover, the peak current at -1.3 V could further increase …

Marangoni Flows During Nonsolvent Induced Phase Separation, Douglas R. Tree, Tatsuhiro Iwama, Kris T. Delaney, Joshua Lee, Glenn H. Fredrickson

Faculty Publications

Motivated by the much discussed, yet unexplained, presence of macrovoids in polymer membranes, we explore the impact of Marangoni flows in the process of nonsolvent induced phase separation. Such flows have been hypothesized to be important to the formation of macrovoids, but little quantitative evidence has been produced to date. Using a recently developed multifluid phase field model, we find that roll cells indicative of a solutal Marangoni instability are manifest during solvent/nonsolvent exchange across a stable interface. However, these flows are weak and subsequently do not produce morphological features that might lead to macrovoid formation. By contrast, initial conditions …

Nanoreactors: Strategies To Encapsulate Enzyme Biocatalysts In Virus-Like Particles, Joshua W. Wilkerson, Seung-Ook Yang, Parker J. Funk, Steven K. Stanley, Bradley Charles Bundy

Faculty Publications

Enzyme-mediated biocatalysis is generally more selective and environmentally friendly and requires less energy than chemocatalysis. However, factors such as temperature, acidity and the presence of proteases can negate enzyme activity. Encapsulation in virus-like particles is one promising method to mitigate these difficulties. Encapsulation also can be used to create multi-reaction nanoreactors that increase process efficiency by isolating reaction intermediates. To successfully encapsulate enzymes, a variety of methods involving both non-covalent and covalent interactions have been developed. Here we review promising virus-like particle encapsulation strategies, their advantages and remaining challenges.

Waste Vegetable Oil Properties With Usage And Its Impact On Artisan Soap Making, Jenalyn Thorpe

Undergraduate Honors Theses

This thesis examines the impact of vegetable oil usage in industrial and home settings on the properties of the vegetable oil and how its usage in soap affects the final product. Waste vegetable oil (WVO) is often used to make soap as a way to be more environmentally-friendly and create soap at a low cost in developing countries. Two settings are examined: home usage (i.e. short-term, small-scale usage) and industrial (i.e. long-term, almost continuous usage). This thesis found that lightly used oil (household use) had little to no impact on the quality of the oil, except for its scent. This …

Multienzyme Immobilized Polymeric Membrane Reactor For The Transformation Of A Lignin Model Compound, Rupam Sarma, Md. Saiful Islam, Mark P. Running, Dibakar Bhattacharyya

Chemical and Materials Engineering Faculty Publications

We have developed an integrated, multienzyme functionalized membrane reactor for bioconversion of a lignin model compound involving enzymatic catalysis. The membrane bioreactors were fabricated through the layer-by-layer assembly approach to immobilize three different enzymes (glucose oxidase, peroxidase and laccase) into pH-responsive membranes. This novel membrane reactor couples the in situ generation of hydrogen peroxide (by glucose oxidase) to oxidative conversion of a lignin model compound, guaiacylglycerol-β-guaiacyl ether (GGE). Preliminary investigation of the efficacy of these functional membranes towards GGE degradation is demonstrated under convective flow mode. Over 90% of the initial feed could be degraded with the multienzyme immobilized membranes …

Distillation Optimization In The Pharmaceutical Industry, Daniel Vanzweden

Honors Theses

Distillations are commonly used throughout industry to perform separations by phase change, producing a liquid phase and vapor distillate. However, the process of distilling can be slow and energy intensive, providing a limitation in the production process. Possible improvements to current distillation systems were considered on the basis of thermal efficiency, material throughput (cycle time), and material tolerance. Consideration was given to ensure maintenance is straightforward and relatively quick, as fouling, contamination and tank utilization were concerns. Economic viability of the improvements was completed to determine the project benefit. The optimized design offers increased efficiency for production lines.

Distillation Optimization In The Pharmaceutical Industry, Clayton Carter

Honors Theses

Distillations are commonly used throughout industry to perform separations by phase change. producing a liquid phase and vapor distillate. However. the process of distilling can be slow and energy intensive, providing a limitation in the production process. Possible improvements to current distillation systems were considered on the basis of thermal efficiency, material throughput (cycle time), and material tolerance. Consideration was given to ensure maintenance is straightforward and relatively quick, as fouling, contamination and tank utilization were concerns. Economic viability of the improvements was completed to determine the project benefit. The optimized design offers increased efficiency for production lines.

Natural Polymer Barrier Coatings For Oil And Grease Resistance, Andrew Kathan

Honors Theses

Many barrier coating formulations currently used for oil and grease resistance development in the paper industry have issues with sustainability, biodegradation, or have health concerns associated with them. This thesis tests two starches as barrier coatings to develop oil and grease resistance for food grade packaging sheets. Starch is compatible with almost all papermaking chemicals, is biodegradable, and is easily treated in wastewater systems making it a great candidate to create a more sustainable barrier coating. Cooked hydrophobic starch esters have a unique shear-thinning rheology that allow for high solid starch coatings to be applied with a reduced risk of …

Optimizing Frosted Mini-Wheats' Finished Food Cooling Process, Jessica Graves

Honors Theses

Analyzing energy intensive processes in industry is crucial for improving sustainability, lowering costs, and increasing profit margins on products. Material and energy balances were performed to identify process losses in the cooling of Frosted Mini-Wheats. Existing cooling technology was compared to alternate technology available on the market, and a cost analysis was performed to compare all options explored. Recommendations were made to the system to potentially reduce the line's energy usage and downtime, with the objective of creating a more sustainable and efficient process.

Optimization Of Toaster Pastry Icing Preparation And Application, Rebecca Martus

Honors Theses

The Kellogg Company is interested in optimizing the way the icing for a baked good is prepared and applied during production. The current method has not been significantly changed since the item was first introduced over 50 years ago. A new process was developed to make a more efficient preparation and application of the icing operation. New equipment was identified based on established methods in the food industry. The new equipment and process was verified after the mass and energy balances were calculated. A capital and operating cost analysis was performed to determine if the introduction of the new process …

Spectro-Electrochemical Platforms For Dynamic Analyses Of Catalytic Cascade Systems, Nalin I. Andersen

Nanoscience and Microsystems ETDs

The development of spectro-electrochemical platforms that facilitate the dynamic analyses of complex catalytic cascade systems was explored in this research. These systems facilitated multiple modalities of catalysts and were used as platforms for monitoring catalytic transformations quasi-in situ. The analytical platforms allowed for the characterization of intermediates and products using surface-enhanced Raman spectroscopy (SERS). The design and fabrication of these devices proved to be reproducible, made of materials that can be manipulated for multiple applications, and incorporate fluid mechanics, electrochemistry, and multimodal catalysis. Microfluidic technology offers capabilities for understanding catalytic cascade systems by providing precise dynamic control of …

An Investigation Of The Effects Of The Second Pyrolysis On The Chemistry, Morphology, And Performance Of Iron-Nicarbazin Catalysts, Elizabeth B. Weiler

Chemical and Biological Engineering ETDs

Proton exchange membrane fuel cells offer a cost-effective, environmentally friendly, and sustainable alternative to petroleum-based power sources to the transportation sector. However, slow electrochemical reactions at the cathode of these fuel cell prevent the technology from being competitive. Iron-nitrogen-carbon based catalysts have emerged as a viable answer to this problem, yet further progress is needed to improve their performance beyond that of current state-of-the-art platinum-based catalysts, which are economically and geopolitically impractical to be a final solution. Currently, a two-step high temperature pyrolysis method has proven a promising way to synthesize iron-nitrogen-carbon catalysts for optimized performance, but there is a …

The Catalytic Activity Of Copper Oxide Nanoparticles Towards Carbon Monoxide Oxidation Catalysis: Microwave – Assisted Synthesis Approach, Hany A. Elazab Dr

Chemical Engineering

In this research, we report a simple, versatile, and reproducible method for the synthesis of copper oxide nanoparticles via microwave assisted synthesis approach. The important advantage of this catalyst is due to its important role not only in the low temperature oxidation of CO but also in potential applications in pharmaceutical and fine chemical synthesis. The results reveal that the copper oxide catalyst has particularly a remarkable high activity for CO oxidation catalysis as it was found that copper oxide (CuO) catalyst has 100% conversion of carbon monoxide into carbon dioxide at 175 oC. This also could be attributed to …

Review Of Challenges And Advances In Modification Of Food Package Headspace Gases, Ziynet Boz, Bruce A. Welt, Jeffrey K. Brecht, William Pelletier, Eric Mclamore, Gregory A. Kiker, Jason E. Butler

Journal of Applied Packaging Research

Modified Atmosphere Packaging (MAP) has been widely used as an effective way to preserve foods. Fresh produce, meat and meat products, seafood, and dairy products can benefit from modified gaseous atmospheres, which are usually achieved by reducing oxygen and increasing carbon dioxide concentrations, within limits, defined by product tolerances. MAP of fresh produce is particularly challenging because products are living and respiring. Respiration rates depend on several factors including temperature, oxygen, and carbon dioxide concentrations. Balancing package permeation with respiration is challenging, often due to limited selection of practical packaging materials. Failing to remain within tolerance limits of products leads …

Waste Management By Waste: Removal Of Acid Dyes From Wastewaters Of Textile Coloration Using Fish Scales, S M Fijul Kabir

LSU Master's Theses

Removal of hazardous acid dyes by economical process using low-cost bio-sorbents from wool industry wastewaters is of a pressing need, since it causes skin and respiratory diseases and disrupts other environmental components. Fish scales (FS), a by-product of fish industry, a type of solid waste, are usually discarded carelessly resulting in pungent odor and environmental burden. In this research, the FS of black drum (Pogonias cromis) were used for the removal of acid dyes (acid red 1 (AR1), acid blue 45 (AB45) and acid yellow 127 (AY126)) from wool industry wastewaters by absorption process with a view to …