Engineering Commons^™

The Potential Of Gold Mine Development Project : A Case Study Of Chifunde District In Mozambique, Sara Mario Mabecuane

Chulalongkorn University Theses and Dissertations (Chula ETD)

This research presents the results of the gold exploration activities developed in the district of Chifunde, Province of Tete in Mozambique. The works showed that in the study area there are two types of deposits which are primary and secondary deposits. There was clear evidence that they have undergone high-grade metamorphism of greenschist due to the grenade occurrences in hornblende in the form of porphyroblast which indicated a high probability of gold occurrence inside amphibolic schist. The results of the SGS laboratory revealed that all samples collected in the area contained gold ranging from 1 to 2,500 ppb, whereas in …

Integrative Co2 Capture And Utilization Process For Methanol Production Through Hydrogenation Reaction Of Co2-Rich Aqueous Penta-Ethylene Hexamine, Wachiramon Khuenkaew

Chulalongkorn University Theses and Dissertations (Chula ETD)

In this study, integration of CO2 capture process with CO2 conversion to methanol process was simulated by Aspen Plus 8.8. The integrative carbon capture and utilization of methanol production can be divided into three main units; CO2 capture unit, methanol synthesis unit, and purification unit. A comparative study between conventional methanol production (case I) and CO2-rich Penta-Ethylene Hexamine (PEHA) conversion to methanol (case II and III) was carried out. Process in case II and III has different product purification processes. In the conventional process, monoethanolamine (MEA) was used in absorber to capture CO2 while PEHA was used in case II …

Fabrication And Characterization Of Bacterial Cellulose-Chitosan/Alginate/Gelatin Hydrogel Scaffolds For Application In Cartilage Tissue Engineering, Phasuwit Phassorn Phatchayawat

Chulalongkorn University Theses and Dissertations (Chula ETD)

Biopolymers of bacterial cellulose (BC), chitosan (C), alginate (A) and gelatin (G) were combined to fabricate three-dimensional (3D) hydrogel composite scaffolds for tissue engineering applications. The bacterial cellulose-chitosan/alginate/gelatin (BCC-AG) hydrogel scaffolds were characterized for chemical property by Fourier transform infrared (FT-IR) spectroscopic analysis, morphology by scanning electron microscopy (SEM), mechanical properties, degradability, biocompatibility and potential application in cartilage tissue engineering. Results from Fourier transform infrared (FT-IR) spectroscopy showed some weak interactions among BC, chitosan, alginate and gelatin, but no chemical interaction between those biopolymers was observed. The morphology of BCC-AG hydrogel scaffolds under SEM observation revealed that alginate and gelatin …

Emulsion Stability Of Heavy Oil With Surfactants And Nanoparticles, Zainab Abdulmohsein, Baojun Bai, Parthasakha Neogi

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The recovered crude oil is often in form of an emulsion and the recovery is cut off when water to oil ratio exceeds a certain amount. The emulsions vary from water-in-oil to oil-in-water and the step that follows is to coalesce droplets to get two continuous liquids. Difficulties arise when the oil contains emulsifiers. There are naturally occurring surfactants, or the oil recovered is by enhanced oil recovery techniques which have additives that stabilize the droplets. We have considered below a heavy oil (viscosity 650-750 mPa.s) containing one of the three surfactants: a nonionic surfactant or a cationic surfactant or …

อิเล็กโทรดีโพสิชันของโครงสร้างนาโนของทองแดงออกไซด์บนแผ่นรองรับทองแดงสำหรับการรีดักชันเชิงไฟฟ้าของไนตรัสออกไซด์, สิรภัทร นิลวิเชียร

Chulalongkorn University Theses and Dissertations (Chula ETD)

งานวิจัยนี้ศึกษาการสังเคราะห์โครงสร้างนาโนของทองแดงออกไซด์บนแผ่นรองรับทองแดงโดยใช้วิธีอิเล็กโทรดีโพสิชันเพื่อให้ทองแดงมีพื้นที่ผิวสูงขึ้นเพื่อใช้เป็นตัวเร่งปฏิกิริยาโลหะทองแดงจากออกไซด์ในการทำปฏิกิริยารีดักชันเชิงไฟฟ้าของแก๊สไนตรัสออกไซด์ จากผลการศึกษาพบว่าปริมาณผลึกทองแดงออกไซด์แปรผันตามความหนาแน่นกระแสไฟฟ้าซึ่งหากมีค่าสูงเกินไปจะส่งผลให้เกิดการเกาะติดของผลึกไม่เต็มพื้นผิว นอกจากนี้ อุณหภูมิของอิเล็กโทรไลต์ที่สูงขึ้นทำให้ปริมาณผลึกเพิ่มขึ้นรวมถึงเกิดผลึกขนาดใหญ่ขึ้นอีกด้วย โดยพบว่าการอิเล็กโทรดีโพสิชันด้วยความหนาแน่นกระแสฟ้า -3.33 มิลลิแอมป์ต่อตารางเซนติเมตรและอุณหภูมิของอิเล็กโทรไลต์ 40 องศาเซลเซียสเป็นสภาวะที่ให้พื้นที่ผิวที่สูงที่สุด การอิเล็กโทรดีโพสิชันที่อุณหภูมิ 50 องศาเซลเซียสก่อให้เกิดผลึกขนาดใหญ่อย่างเห็นได้ชัดส่งผลให้พื้นที่ผิวในการทำปฏิกิริยาต่ำลง สำหรับการทำปฏิกิริยารีดักชันเชิงไฟฟ้าของแก๊สไนตรัสออกไซด์ด้วยตัวเร่งปฏิกิริยาโลหะทองแดงจากออกไซด์นั้น พบว่าความหนาแน่นกระแสไฟฟ้าสำหรับการเกิดแก๊สไนโตรเจนแปรผันตามปริมาณตัวเร่งปฏิกิริยาซึ่งเป็นผลมาจากการควบคุมระยะเวลาในการอิเล็กโทรดีโพสิชัน โดยเวลาอิเล็กโทรดีโพสิชันที่เหมาะสมคือ 30 นาที โดยเกิดปฏิกิริยารีดักชันของแก๊สไนตรัสออกไซด์ที่ศักย์ไฟฟ้าเริ่มต้นประมาณ 0.2 V vs RHE และเกิดปฏิกิริยาการผลิตไฮโดรเจนที่ประมาณ -0.3 V vs RHE และเมื่อศักย์ไฟฟ้าสูงขึ้นทำให้ความหนาแน่นกระแสไฟฟ้าสำหรับการเกิดแก๊สไนโตรเจนสูงขึ้นจนถึงศักย์ไฟฟ้าเท่ากับ -0.12 V vs RHE และลดต่ำลงที่ศักย์ไฟฟ้าที่สูงขึ้น ซึ่งให้ความหนาแน่นกระแสไฟฟ้าสำหรับการเกิดไนโตรเจนสูงสุดเท่ากับ -8.61 มิลลิแอมป์ต่อตารางเซนติเมตร และประสิทธิภาพเชิงฟาราเดย์ของการเกิดไนโตรเจนเท่ากับร้อยละ 98.5±1.7 นอกจากนี้ยังพบว่าตัวเร่งปฏิกิริยาทองแดงจากออกไซด์มีความเสถียรต่อการรีดักชันแก๊สไนตรัสออกไซด์เป็นเวลาอย่างน้อย 7 ชั่วโมง

Fabrication, Characterization And Applications Of Highly Conductive Wet-Spun Pedot:Pss Fibers, Ruben Sarabia Riquelme

Theses and Dissertations--Chemical and Materials Engineering

Smart electronic textiles cross conventional uses to include functionalities such as light emission, health monitoring, climate control, sensing, storage and conversion of energy, etc. New fibers and yarns that are electrically conductive and mechanically robust are needed as fundamental building blocks for these next generation textiles.

Conjugated polymers are promising candidates in the field of electronic textiles because they are made of earth-abundant, inexpensive elements, have good mechanical properties and flexibility, and can be processed using low-cost large-scale solution processing methods. Currently, the main method to fabricate electrically conductive fibers or yarns from conjugated polymers is the deposition of the …

Coarse-Grained Dynamically Accurate Simulations Of Ionic Liquids At Vacuum-Interface, Tyler D. Stoffel

Theses and Dissertations--Mechanical and Aerospace Engineering

Ionic liquids, possessing improved properties in many areas of technical application, are excellent candidates as components in development of next-generation technology, including ultra-high energy batteries. If they are thus applied, however, extensive interfacial analysis of any selected ionic configuration will likely be required. Molecular dynamics (MD) provides an advantageous route by which this may be accomplished, but can fall short in observing some phenomena only present at larger time/length scales than it can simulate. Often times this is approached by coarse-graining (CG), with which scope of simulation can be significantly increased. However, coarse-grained MD systems are generally known to produce …

Organophosphorus-Hydrazides As Potential Reactive Flame Retardants For Epoxy, Alexander B. Morgan, Vladimir Benin, Donald A. Klosterman, Abdulhamid Bin Sulayman, Mustafa Mukhtar, Mary L. Galaska

Chemical and Materials Engineering Faculty Publications

For structural composites used in vehicles and aircraft, flame retardant chemistries which enhance char formation and reduce heat release are preferred. Phosphorus-based and phosphorus–nitrogen flame retardants for epoxies have been well studied to date, but phosphorus hydrazides have not been studied for their flame-retardant potential in epoxy. These hydrazides offer some novel structures and they can potentially offer a combination of vapor and condensed phase flame retardant action. A series of eight compounds were systematically investigated in this study as reactive flame retardants in a bisphenol F epoxy/aliphatic amine resin system at a level of 2.5 wt% phosphorus. Results suggest …

Thermoanalytical Studies On The Decomposition Of Energetic Ionic Liquids, Alan Esparza

Open Access Theses & Dissertations

Hydrazine has been extensively used as a propellant for space applications for more than half a century. However, its hazardous characteristics cause high storage and handling costs. For this reason, the search for alternatives, the so-called “green monopropellants,” is of great interest. Most green monopropellants are mixtures of an oxidizer and a fuel, and several ionic liquids (ILs) have been proposed for this application. Among them, hydroxylammonium nitrate (HAN) and 2-hydroxylethylhydrazinium nitrate (HEHN) are promising oxidizer and fuel, respectively. The objective of the present work was to clarify the decomposition kinetics of both HAN and HEHN, using thermogravimetric analysis (TGA), …

Tuning The Activity And Stability Of Platinum Nanoparticles Toward The Catalysis Of The Formic Acid Electrooxidation, Islam M. Al-Akraa, Bilquis A. Al-Qodami, Santosh Sridhar Mysore Dr, R. Viswanatha Dr, Abdul Kareem Thottoli, Ahmad M. Mohammad

Chemical Engineering

No abstract provided.

Preparation And Characterization Of Ceramic Nanofiltration Membrane Prepared From Hazardous Industrial Waste, Shereen Kamel Amin, Mai Hassan Roushdy, Heba Mohamed Abdallah, Ahmed Mostafa, Magdi Fouad Abadir

Chemical Engineering

Kiln rollers, which are widely used in ceramic tiles production, are usually subjected to surface grinding to remove the contaminations. The resulted fine powder is considered useless waste and a hazardous source of environmental pollution particularly as it contains health‐threatening fine free silica. In the present paper, the grind waste from kiln rollers was reused as raw material in the fabrication of nanofiltration cerramic membrane. The samples of produced ceramic membranes were formed into disks by adding 15% (by weight) organic binder solution with 2% concentration, then pressed at 35 MPa, dried and fired at temperatures range from 1100°C to …

Preparation Of Ceramic Membranes From Sludge Waste, Mai H. Roushdy

Chemical Engineering

Ceramic tiles industry produces industrial waste wit large amount which become a worldwide problem. Ceramic sludge produced from ceramic tiles wastewater treatment plant is routinely discarded as a useless waste. The aim of this paper is to recycle the ceramic sludge waste to be used as raw material for ceramic membrane production. The ceramic sludge was collected, dried, and characterized by mineralogical composition (XRD), thermal analysis (DTA and TGA), and chemical composition determination (XRF). The support ceramic membrane samples were formed, pressed, dried then fired using temperatures from 1050 to 1200 °C for 1 to 3 hours. Verification parameters were …

Synthesis And Characterization Of Chitosan Based Catalyst For Catalysis Applications, Mostafa Radwan

Chemical Engineering

In this research, chitosan based catalyst synthesis and characterization was investigated for different application in catalysis as chitosan based catalyst was combined with metal oxides in order to be used in dye removal of methyl orange (MO). Diluted acetic acid was used to dissolve chitosan then different percentages for metallic ions were mixed with diluted chitosan and then, 500 μL were added to the sample to reduce the metal salts then, microwave was used to heat the mixture for 5 minutes and then dried at 80-100 °C. Finally, X- ray diffraction was used to confirm the catalyst prepared. The aim …

Enhanced Glucose Electrooxidation At Ni-Cu Binary Oxide Nanocatalyst, Islam M. Al-Akraa, Mahmoud M. Abouzaid Eng, Yaser M. Asal Mr, Ahmad M. Mohammad Prof

Chemical Engineering

The aim of this study is to fabricate a nickel (NiOx) and copper (CuOx) oxide nanocatalyst on a glassy carbon (GC) electrode (will be abbreviated as Ni-Cu/GC) for glucose oxidation (GO). A sequential electrodepositon mode was applied to assemble NiOx and CuOx in the fabrication scheme. The optimization of Ni loading on the GC surface (will be abbreviated as Ni/GC electrode) was achieved first to attain the maximum catalytic efficiency in terms of the specific current toward GO. This (409 Ag1)was obtained by applying 15 mC/cm2 in the deposition of Ni. However, unfortunately the NiOx/GC could not support a long-term …

Effect Of The Electrodeposition Potential Of Platinum On The Catalytic Activity Of A Pt/Gc Catalyst Toward Formic Acid Electro−Oxidation, Islam M. Al-Akraa, Bilquis A. Al-Qodami Ms., Ahmad M. Mohammad Prof

Chemical Engineering

The electrocatalytic activity of platinum (Pt)–modified glassy carbon (GC) (referred as Pt/GC) electrodes toward the formic acid electro−oxidation (FAO) was investigated. The Pt deposition on the GC substrate was carried out by a potentiostatic technique at different potentials (from 0.2 V to −0.2 V vs. Hg/Hg2Cl2/KCl (sat.) reference electrode) and the corresponding influence on the catalytic activity toward FAO was monitored. The electrocatalytic inspection revealed a potential role for the Pt deposition potential in boosting the catalytic efficiency of the catalyst toward FAO and further in mitigating the CO poisoning that eventually deactivate the catalyst. Interestingly, the highest activity toward …

Development Of Novel Adsorbent For Industrial Waste Water Treatment, Islam M. Al-Akraa, Hassan M. Shehata Eng, Dalia A. Ali Eng., Hoda A. Elsawy Dr

Chemical Engineering

The main objective of this research project is to perform some experimental procedures to inform the ability of the novel adsorbent used in this project. The chemical modification of the adsorbent is the chemical oxidation of pure powder chitosan using some specific redox pairs which are potassium dichromate and sodium bisulphite. After preparing the modified chitosan, there are some parameters that must be discussed during the adsorption process. The first parameter is the time parameter, showing experimentally the optimum time for adsorption under certain conditions by collecting values of absorbance and concentration of thymol blue adsorbed after the process from …

Ni-Au Anodic Nano-Electrocatalyst For Direct Glucose Fuel Cells, Islam M. Al-Akraa, Aya S. Abdulhalim Eng, Yassr M. Asal Mr, Ahmad M. Mohammad Prof

Chemical Engineering

This study aims at the sequential assembling of a nickel oxide (NiOx: cauliflower-like nanostructure, 90 nm) and gold (Au; spherical, 95 nm in an average particle size) onto the GC surface nanocatalyst on a glassy carbon (GC) electrode (will be abbreviated as Ni-Au/GC) for the glucose electro−oxidation (GO); the principal anodic reaction in the direct glucose fuel cells (DGFCs). The charge of the Ni deposition on the GC surface (will be abbreviated as Ni/GC electrode) was initially optimized to obtain the highest catalytic activity toward GO which attained at (339.8 Ag−1) by applying 15 mC in the Ni deposition. Yet, …

Radio Frequency Studies Of Soot Loading And Ammonia Storage On A Diesel Particulate Filter With A Scr Catalyst Coating, Shreyans Sethia

Dissertations, Master's Theses and Master's Reports

The radio frequency (RF) measurement technique has been shown to be a viable method for measurement of the amount of soot loaded onto DPF’s ^[1] and the amount of NH₃ stored on SCR catalysts ^[2]. In one of the configurations, a microwave resonant cavity is formed by the metal can encasing the enclosed catalyst. Two metal probes acting as antennas are placed on either side of the catalyst. Power transmitted between the antennas is monitored as the frequency of the signal is swept. At certain frequencies, resonance is achieved. Measurements of the resonance frequencies, amplitude at resonance, and …

Lipemia Levels Analysis From Human Blood Samples, Zainab Ibrahim Alshoug

Dissertations, Master's Theses and Master's Reports

Worldwide, an estimated 31% of people who die each year have a cardiovascular disease (CVD), an all-encompassing group of diseases and conditions of the heart or blood vasculature. Access to portable, user-friendly tools to test lipid levels accurately and efficiently, without requiring large volume blood draws, will help improve access to wellness management by reducing costs and facilitating early screening and monitoring of CVD thus improving outcomes. Point of care micro or millifluidic chips to test biofluids that are integrated into detection units are an attractive measurement tool because of their potential for ease of use by patients at home …

Investigation Of The Stability Of Liquid And Air Films By Synchronized Tri-Wavelength Reflection Interferometry Microscope, Yuesheng Gao

Dissertations, Master's Theses and Master's Reports

Liquid films are widely involved in many processes, such as froth flotation, oil extraction, foam/bubble stabilization, etc. In the meantime, air films are commonly seen in diverse fields like dust control, ink print, coating industry, and so on. Stabilities of these liquid/air films are of great importance to improve the processes. As more and more researchers are paying increasing attention to liquid/air films, tremendous efforts have been made to explore the properties of the films. On the one hand, some theoretical models have also been well developed in recent decades. State-of-the-art technologies, such as AFM, SFA, and RICM, have also …

Systems Analysis For Sustainability Assessment Of Biogas And Bio-Ch4 Production From Food Waste And Dairy Manure Mixtures In The Us, Sharath Kumar Ankathi

Dissertations, Master's Theses and Master's Reports

The purpose of the dissertation is to relate systems analysis for bioenergy to identify optimum configurations for improved scenarios and to make better decisions in a systems perspective.

Chapter 1 is a review of the literature to identify the state of the knowledge in terms of systems analysis for anaerobic digestion (AD) bioenergy systems. The key outcomes from this review showed that anaerobic digestion of mixtures of food waste and animal manure has great potential to achieve economic and environmental benefits compared to other treatments of organic waste materials, such as landfilling or conventional manure management.

Chapter 2 focuses on …

Mechanisms Of Pathogen Inactivation In Wastewater And Pharmaceutical Applications, Christa L. Meingast

Dissertations, Master's Theses and Master's Reports

Infectious diseases are a significant threat to public health. Though society enacts practices to prevent the spread of these dangerous diseases, challenges remain. Therefore, continual advancements in treatment and prevention are required. Wastewater treatment and viral clearance in pharmaceutical applications are two key health measures that prevent the spread of infections.

A low-cost, low-technology biosolids treatment process was developed to improve wastewater treatment by collecting key information on storage temperature, ammonia, volatile solids, moisture content, pH, and pathogen inactivation in biosolids over long-term storage at two wastewater treatment plants located in northern climates of the United States. Inactivation of pathogens …

Detection And Thermal Stabilization Of Virus Based On Surface Properties, Xue Mi

Dissertations, Master's Theses and Master's Reports

Viral diseases take the lives of millions of people each year. The most effective methods to prevent viral disease outbreak are viral detection to reduce contact with viral pathogens and vaccines to prevent disease. To reduce the costs of the detection of viruses and improve vaccine formulation, we explored viral surface properties. The properties we have focused on are viral hydrophobicity and surface charge using chemical force microscopy (CFM). CFM is a single-particle technique that measures the adhesion force of a functionalized atomic force microscopy (AFM) probe, and in this study, a virus covalently bound to a surface. The non-enveloped …

Continuous Viral Vaccine Manufacturing And Viral Detection Strategies, Dylan G. Turpeinen

Dissertations, Master's Theses and Master's Reports

Viruses are responsible for many human diseases that lead to suffering and death. Acquired immunodeficiency syndrome (AIDS), influenza, and coronavirus disease 2019 (COVID-19) have claimed the lives of millions of people. Two methods have been created to reduce the suffering caused by these diseases. The first is the manufacturing of vaccines that prevent disease and the second is the development of virus detection tests that lead to treatment. The work summarized in this dissertation discusses the development of a continuous virus purification process using an aqueous two-phase system for use in vaccine manufacturing. Additionally, two novel virus detection methods were …

Virus-Like Particle Vaccine Manufacturing From Yeast, Ananya Ananya

Dissertations, Master's Theses and Master's Reports

Influenza virus has an intrinsic nature to undergo mutations. Hence, there have been struggles to combat this disease since the time when the worst influenza pandemic first hit in 1918. Vaccines have proved to be effective in controlling the spread of the influenza A virus by providing herd immunity. However, the contemporary design of influenza A virus based on egg and cell-culture is not efficient in tackling influenza A virus transformation. Virus-like particles (VLPs) have established themselves as a potental platform for future vaccine candidates. VLPs have all the credentials to supplant contemporary vaccine designs without compromising on immunogenicity. For …

Gravity-Drawing Flexible Silicone Filaments As Fiber Optics And Model Foldamers, Katherine Snell

CMC Senior Theses

Here, we present a method of gravity-drawing polydimethylsiloxane (PDMS) silicone fibers with application as fiber optics and as model foldamers. Beginning as a viscous liquid, PDMS is cured using heat until its measured viscosity reaches 4000 mPa•s. The semi-cured elastomer is then extruded through a tube furnace to produce thin (diameters on the order of hundred micrometers) filaments with scalable lengths. PDMS is biocompatible, gas-permeable, flexible, and hydrophobic. Additionally, the PDMS surface hydrophobicity can be modified via UV exposure, O2 plasma, and corona discharge. We demonstrate the patternibility (i.e patterns of hydrophobicity) of PDMS fibers, adding complexity to potential foldamer …

Selective Adsorption Of Rare Earth Ions From Aqueous Solution On Metal-Organic Framework Hkust-1, Liang Zhao, Xiaoguang Duan, Muhammad R. A. Azhar, Hongqi Sun, Xiangchen Fang, Shaobin Wang

Research outputs 2014 to 2021

Recovery of rare earth ions from wastewater holds an important strategy for the use of the precious resources. In this study, we found that a metal-organic framework (MOF), HKUST-1, exhibited a high affinity and selectivity towards adsorptive recovery of rare earth ions (Ce3+ and La3+) in aqueous solutions. The adsorbent showed a remarkable adsorption capacity of 234 mg/g and 203 mg/g for Ce3+ and La3+ at pH = 6, respectively. More importantly, its adsorption selectivity of the rare earth ions was about 87% against other metal ions. The adsorption isotherm, kinetics, and mechanism in the process were also investigated. The …

Why Do I Have To Know This? Engineering In A Globalized Society, Caleb Cunningham

Honors Theses

Through a pilot comparative study, this thesis examines the problem-solving of chemical engineering students and chemical engineering faculty. Specifically, the thesis examines the extent to which individuals include global factors (cultural, social, environmental, and economic) into their engineering solutions as specified by ABET. Several hypotheses were investigated in this pilot study: (i) having a study abroad experience would increase the likelihood that participants included the global factors of interest, (ii) the type (PUI, Research Intensive, Unique) of institution students attended would impact how individuals approached the problem, (iii) students with similar career aspirations would approach the problems similarly, (iv) having …

Comparative Scoping Study Report For The Extraction Of Microalgae Oils From Two Subspecies Of Chlorella Vulgaris, Jasmine Kreft, Eric Moe, Nicholas Garcia, Andrew Ross, Wayne Seames

Chemistry Faculty Publications

The production of microalgae as a fatty acid oil resource for use in biofuels production is a widespread research topic at the lab scale. Microalgae contain a higher lipid content on a dry-weight basis compared to oilseeds such as soybeans. Additionally, the growth and cultivation cycle of microalgae is 15 days, in comparison to soybeans, for which the cycle occurs once or twice annually. However, to date, it has been uneconomical to produce microalgae oils in a world-scale facility due to limitations in cultivating microalgae at commercial scales. Recent developments suggest that the use of heterotrophic microalgae may be economically …

Data Analytics Of Natural Gas Injection Enhanced Oil Recovery For Unconventional Reservoirs, Ali Waqar

Masters Theses

"Unconventional Enhanced Oil recovery, via the injection of natural gas has attracted great attention, as studies and projects have shown to be promising. An overview of pertinent studies has been carried out. Core Scale Laboratory Experiments, Core Scale Simulation, Field Scale simulation and pilot projects are analyzed. Data is collected for Core, Reservoir, Operational, and recovery information. Thereafter, Data analysis techniques are applied to identify data ranges, distributions, trends, relationships, and to eventually reach conclusions.

Huff and Puff injection is the preferred mode of injection, delivering most promising results for unconventional reservoirs. Across all the studies, with increase in amount …