Engineering Commons^™

Integration Of Algae And Biomass Processes To Synthesize Renewable Bioproducts For The Circular Economy, Jessica Martin

USF Tampa Graduate Theses and Dissertations

Rapid population growth and global industrialization have substantially heightened the demand for fossil-based fuels and products in various sectors of the global economy, including energy production, transportation fuels, and as raw materials for petrochemicals. The intense consumption of fossil fuels has caused immense environmental impacts, especially pertaining to carbon dioxide emissions. Shifting to renewable feedstocks (raw materials) is expected to reduce these emissions by lowering the carbon footprint of fuels and products compared to traditional fossil-derived alternatives. This transition aligns with the goal of creating a sustainable and circular economy, emphasizing efficient resource use, and reducing waste generation through recycling …

Carbonate Precipitation Behavior In Co2 Mea Electrolyzers With Cu Electrocatalyst, John C. Hendershot

LSU Master's Theses

Annually, over 35 billion metric tons of carbon dioxide (CO₂) are emitted into Earth’s atmosphere. The accumulated CO₂ emissions in the atmosphere over the last century drive climate change. CO₂ electroreduction (CO₂ER) is an emerging technology that aims to recycle carbon emissions from the industrial sector by using CO₂, H₂O, and electricity as a feedstock to produce ethylene (C₂H₄) at current densities as high as 1 A cm^-2 and Faradaic efficiencies (FE) of 60%. However, CO₂ electrolyzers currently demonstrate poor durability at industrially relevant …

Swelling Induced Buckling Of Photopatterned Hydrogel Beams, Chinar Yogesh Kokaje

USF Tampa Graduate Theses and Dissertations

The main goal of this study was to learn more about swelling induced buckling of surface-attached gel lines photo-patterned from thermally responsive polymers. A library of 10 different polymer compositions was synthesized using methacryloyloxybenzophenone (MABP) as the photo-cross-linking monomer. For each of the polymers, a series of beam-like patterns were prepared on polystyrene tissue culture dishes by first depositing a known amount of polymer into the tissue culture dish followed by pattern generation using a photo-lithography mask with line widths of 10, 20, 30, 50, and 80 μm. The target height of each polymer line was 100 μm. After development …

Comparative Evaluation Of Investigation Methods For Estimating The Load-Dependent State Of Charge And End Of Discharge Of A Multirotor Uav Battery, Hanna Dibbern, Morten Roßberg, Claudia Werner

Journal of Aviation Technology and Engineering

As the scope of multirotor unmanned aerial vehicle (UAV) applications increases, more attention is being paid to UAV energy requirements, which vary depending on the mission profile. To obtain accurate information about the UAV battery during flight, the idea of a digital twin including a battery state estimation model is promising. For battery state estimation, a Kalman filter combination is the preferred approach in the literature. Comparing different Kalman filters, the unscented Kalman filter has a more accurate estimation for nonlinear systems compared to the extended Kalman filter. In the application of UAV flight with load-dependent flight missions, the comparison …

Stereoscopic-Based Mass Properties Estimation For Warhead Fragments, Alessia Nocerino, Katharine Larsen, Riccardo Bevilacqua, Elisabetta L. Jerome

Student Works

FRAGMENTATION characteristics such as spatial distribution, number of fragments, fragment velocity, and fragment mass can be used to characterize the lethality of a fragmenting weapon or any metal cased explosive [1,2]. However, most warhead tests and evaluations are limited to static arena testing, where fragment characteristics must be collected by hand. Recently, stereoscopic imaging techniques have been added to static arena tests. Using this method, position tracks can be collected for each fragment, and then velocity information can be found. This paper proposes a method to estimate the mass and moment of inertia using data collected by a stereoscopic imaging …

Computational Modeling Using A Novel Continuum Approach Coupled With Pathway-Informed Neural Networks To Optimize Dynein-Mediated Centrosome Positioning In Polarized Cells, Arkaprovo Ghosal, Padmanabhan Seshaiyar Dr., Adriana Dawes Dr., General Genomics Inc.

Annual Symposium on Biomathematics and Ecology Education and Research

No abstract provided.

New Dual Modality Technique Of Gamma-Ray Densitometry (Grd) And Optical Fiber Probe (Ofp) To Investigate Line-Averaged Diameter Profiles Of Gas, Liquid, And Solid Holdups Along The Height Of A Slurry Bubble Column, Omar Farid, Binbin Qi, Sebastián Uribe, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

A new hybrid measurement technique was developed and employed to study line-averaged three-phase holdup distribution in a Slurry Bubble Column Reactor (SBCR) using gamma-ray densitometry (GRD) and point optical fiber probe (OFP) techniques. The OFP technique was used to measure the local gas holdup at 45 nodes in the cross-section area of the SBCR at three different axial levels. Thus, the GRD technique measured the spectrum of the SBCR for two different orientations simultaneously with the OFP technique at the same operating conditions to determine the solid holdup distribution radially and axially. The line-averaged solid holdup for 25% solids loading …

A Multi-Organ Maize Metabolic Model Connects Temperature Stress With Energy Production And Reducing Power Generation, Niaz Bahar Chowdhury, Margaret Simons- Senftle, Berengere Decouard, Isabelle Quillere, Martine Rigault, Karuna Anna Sajeevan, Bibek Acharya, Ratul Chowdhury, Bertrand Hirel, Alia Dellagi, Costas Maranas, Rajib Saha

Department of Chemical and Biomolecular Engineering: Faculty Publications

Climate change has adversely affected maize productivity. Thereby, a holistic understanding of metabolic crosstalk among its organs is important to address this issue. Thus, we reconstructed the first multi-organ maize metabolicmodel, iZMA6517, and contextualized itwith heat and cold stress transcriptomics data using expression distributed reaction flux measurement (EXTREAM) algorithm. Furthermore, implementing metabolic bottleneck analysis on contextualized models revealed differences between these stresses. While both stresses had reducing power bottlenecks, heat stress had additional energy generation bottlenecks.We also performed thermodynamic driving force analysis, revealing thermodynamics-reducing power-energy generation axis dictating the nature of temperature stress responses. Thus, a temperaturetolerant maize ideotype can …

Selection Of Natural Surfactants For Possible Use In Improving Oil Recovery Of Carbonate Oil Reservoirs, Hiba Hachem Limam

Theses

Middle East petroleum industry is currently searching for the most suitable enhanced oil technique to improve the oil recovery from local oil reservoirs. The biggest challenge for the application of enhanced oil recovery (EOR) in the Middle East is the harsh environment (high salinity and temperature). Surfactant (synthetic or natural) is one of the EOR major players considered for application in the Middle East. However, synthetic surfactants have several drawbacks, such as economically unattractive and environmental impacts. This study investigated the possible use of natural surfactant extracted from the leaves of three types of plants, namely Aloe Vera, Tetraena qatarensis, …

Development Of Eco-Friendly Chitosan-G-Polyacrylamide Preformed Particle Gel For Conformance Control In High-Temperature And High-Salinity Reservoirs, Reem Elaf, Ahmed Ben Ali, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Oil and gas extraction has become challenging nowadays due to the accompanying amount of excess produced water that results in poor recoverability of hydrocarbon, besides other environmental and economic isues. A recent and efficient technology for conformance control is the injection of preformed particle gels (PPGs), which results in a more practical production process. Nevertheless, existing treatments fail in high-temperature reservoirs, are extremely sensitive to salinity, and are hazardous. The characteristics of the designed PPG, such as mechanical strength and thermal durability, is mainly depend on their crosslinking method. Polysaccharides-based gels prepared by physical crosslinking are weaker than the ones …

Landscape Position And Cover Crops Affects Crop Yields In A Terrace-Tiled Field, Harpreet Kaur, Kelly A. Nelson, Gurbir Singh, Gurpreet Kaur, Katherine R. Grote

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Cover Crops (CC) Provide Soil Ecosystem Benefits Including Reduced Soil Erosion, Improved Soil Health, and Nutrient Cycling. However, the Effect of CCs on Rotational Commodity Crop Grain Yields and Nutrient Uptake May Vary at Different Landscape Positions and under Different Soil Moisture Dynamics. the Objectives of This Study Were to Determine the Influence of CCs in a Terraced Field on Soil Moisture at Crop Emergence and Reproductive Stages of Corn (Zea Mays L) and Soybean (Glycine Max L. Merr.) Development, and Evaluate CCmix (Wheat (Triticum Aestivum L.), Radish (Raphanus Raphanistrum Subsp. Sativus), and Turnip (Brassica Rapa Subsp. Rapa)) and Cereal …

Dependence Of The Granulometric Composition Of Chalk During Granulation In A Turbulized Layer, N.A. Annaev, S.Kh. Nurmukhamedov, Zh.V. Sultonov, N.Sh. Khudoiberdieva

Chemical Technology, Control and Management

The article presents the results of an experimental study on chalk granulation in the turbulized layer of a turboblade granulator. The design of the apparatus combines the following sequential processes: grinding, granulating and compacting newly formed granules. In addition, this device has the ability to carry out both rotational and reciprocating motion. It has been established that preliminary grinding of the feedstock increases the efficiency of the granulation process and improves the quality of the finished product. In the experiments, four substances were used to create 2 astringent suspensions and the optimal combination and their ratios were determined. The experiments …

The Algorithm For The Design Of Fine Granular Substances’ Smart-Type Heat And Moisture Converters Based On Their Accuracy And Speed Criteria, Erkin Uljaev, Ali Abduakhatovich Abduraxmanov

Chemical Technology, Control and Management

The paper describes a technique and algorithm allowing to perform parametric design of smart-type heat and moisture converters (hereinafter SHMC) of fine-grained dispersive materials based on their criteria of accuracy and speed. The proposed algorithm optimizes the process of design of smart-type switches and ensure optimal performance of the switches. The method of calculation and selection of optimal parameters of smart-type heat and moisture converters intended to be used in the measurement of parameters such as heat and humidity of fine dispersive substances are aimed at boosting two parameters, i.e., the accuracy and speed. Also, the design stages have been …

Algorithm For The Functioning Of The Robot's Mechatronic System, Nodira Batirdjanovna Alimova, Bekmurod Bayotovich Yusupov

Chemical Technology, Control and Management

Currently, the introduction of mechatronics and robotics into modern technologies, including rural industry, which are based on different types of mechatronic modules, is relevant. The article discusses the functioning algorithm of the electro-pneumatic multi-position mechatronic system of an intelligent robot. The mechatronic system under consideration is an integrated complex of electro-pneumatic elements, electronic elements and computer technology, with constant dynamic changes in energy and information between them, united by a common automatic control system. The main distinctive feature of this mechatronic system is increased positioning accuracy and high traction forces.

Development Of An Imitation Model Of The Vulcanization Process In The Production Of Elastomeric Composites, Toshtemir Avezov, Mirxalil Agzamovich Ismailov

Chemical Technology, Control and Management

In the article, a systematic approach to the mathematical modeling of the production process of complex multi-stage elastomeric composites was considered, which allows to take into account the stoichiometric relationship of the chemical reaction in the process. Based on the chemical reaction occurring in the mixer, a kinetic model of the elastomer composites production process is proposed, which is the basis for obtaining the main functional relationship of the mathematical model for the mixer, the main quality indicator of the process. The proposed systematic approach in the form of a mathematical model based on the stoichiometric relationship and the …

Trends In The Development And Improvement Of Glass Furnaces And Monitoring And Control Systems, N.R Yusupbekov, O'Tkir U. Xolmanov

Chemical Technology, Control and Management

The theory and practice of establishing industrial automation systems for glass furnaces and installations as they are right now are taken into consideration. Comparative analysis is based on publications over the last 20 years in the field being studied. On the basis of an analysis of the review materials, generalizations are made that form the basis for proposals aimed at modernizing and improving the technology and instrumentation of fuel combustion processes in gas-burning furnaces and installations, as well as monitoring and control systems for technological processes occurring in glass furnaces and installations.

Metric Algorithms Of Symbol Detection For Determining A Group Of Significant Objects, Sherzod Ismoiljonovich Yuldashev

Chemical Technology, Control and Management

This article examines the algorithm of nearest neighbors, which widely uses metric classification algorithms and the combinatorial theory of reconnection with the precedent information in solving practical recognition problems. One of the most important issues in the development of image recognition systems is that the image recognition system determines the characteristics of objects. Most pattern recognition methods are used in the process of recognizing not all objects of the training sample, but a certain part of the objects. The formation of a training sample by filtering objects according to the level of importance for metric classification algorithms is carried out …

Study Of Technological Multi-Stage Modes Of Refining Vegetable Oils, Elyor Erkinovich Samadov

Chemical Technology, Control and Management

The work reflects the current state of the technology for obtaining refined vegetable oils and identifies trends in their improvement and further development in the environment of industrial automation using modern methods of distributed monitoring, building control, and management systems for technological processes of refining vegetable oils. The influence of technological modes of refining vegetable oils on the efficiency of diffusion extraction of free fatty acids (FFA) has been studied and the indirect pH-metric measurement of FFA concentration has been substantiated.

Determination Of Oxidative Stability Of Crude And Refined Vegetable Oils By Rancimat, Oybek Zufarov, Kamar Serkayev

Chemical Technology, Control and Management

The oxidative stability of vegetable oils has been introduced as a critical factor that affects on its quality, shelf life, and nutritional value. In this study, the Rancimat method was analyzed for investigation and comparing the oxidative stability of crude and refined vegetable oils. The induction period, representing the time taken for significant oxidative degradation to occur, has been used as a key parameter to evaluate the oxidative stability. The oxidative stability of different types of vegetable oils, including sunflower, rapeseed, soybean, and cottonseed oil, was studied at various stages of processing: water degummed and neutralized oil. The induction period …

Synthesis Problem Of Adaptive Control Systems For Multi-Channel And Multi-Mode Objects, Jasur Usmonovich Sevinov, Abdishukurov Maqsud O'G'Li Shavkat Mr, Nasriddin Xasanovich Bobomurodov

Chemical Technology, Control and Management

The issue of synthesis of an adaptive control system for multi-channel and multi-mode objects is considered. Development that of effective adaptive control algorithms for nonlinear dynamic systems ensure quality indicators of processes. In technological processes, it is necessary to control several parameters or several systems at the same time. For such a process control system, an adaptive control system is created. Work has been carried out on structural projects for the installation of adaptive systems. The stable requirements for the correction of adaptive control systems are seen. A review of several parametric deviation detections, based on the reference model and …

Fast Fourier Transform Analytical Expression Of Estimation Of Nosinusoidality Indicators, Ilkhomjon Khakimovich Siddikov, Zailobiddin Urazali O’G’Li Boixanov

Chemical Technology, Control and Management

This in the article asynchronous motor is reactive power control to do and manage for from the transformer used. The main element of the current transformer is the measuring instrument, i.e. the sensitive element. Depending on the number of asynchronous motor stator blades, the measurement sensitive element is placed between the main winding and the rotor as a two-ring or three-ring. Measurement accuracy, reliability, and sensitivity increase compared to an independent measuring device. The measuring element loops are independent or connected in series . When the measurement loops are connected in series, the amount of output voltage is …

Novel Composite Membrane(Pes/Clay/Zeolite) For Ammonium And Sulfide Ions Removal From Sour Water, Marwa Abdel Fattah, Marwa S. Shalaby, Moustapha S. Mansour, Ahmed Badr Eldin, Ibrahim Ismail Ibrahim, Heba Abdallah

Mansoura Engineering Journal

The viability of human life depends heavily on the accessibility of clean water, not only for personal use but also to support various industrial, agricultural, and industrialrelated activities. Composite membranes were prepared using polyethersulfone (PES) with zeolite and clay. The membranes were fully characterized. Membrane performances were tested using sodium sulfide with a concentration of 0.365 g/l and ammonium chloride with a concentration of 0.148 g/l to study the effect of prepared composite membranes on the treatment of sour water. The membrane's mechanical properties were tested and M3 has the greatest tensile strength of 64 MPa with an elongation of …

Surface Modifications Of Lini0.96Co0.02Mn0.02O2 With Tungsten Oxide And Phosphotungstic Acid, Gang Zhao, Zheng-Liang Gong, Yi-Xiao Li, Yong Yang

Journal of Electrochemistry

With the rapid development of electric vehicles, enormous demands are made for higher energy density, better cycling performance and lower cost of lithium-ion batteries (LIBs). As an important high capacity cathode material for LIBs, the high nickel layered oxide material LiNi_0.8Co_0.1Mn_0.1O₂(NCM811) can reach an energy density of 760 Wh·kg^-1. The ultra-high nickel ternary positive electrode material (LiNi_1-x-yCo_xMn_yO₂, x ≥ 0.90) has a specific capacity of more than 210 mAh·g^-1, and can realize higher energy density. Besides, an ultra-high nickel material …

Preparation And Electrocatalytic Performance Of Feni-Cop/Nc Bifunctional Catalyst, Si-Miao Liu, Jing-Jiao Zhou, Shi-Jun Ji, Zhong-Sheng Wen

Journal of Electrochemistry

Rechargeable zinc-air batteries have gradually attracted much attention worldwide due to their high capacity, high energy density and low price. Oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) correspond to the charging and discharging processes in rechargeable zinc-air battery, respectively. At present, commercial Pt/C and IrO₂ catalysts hinder the large-scale application of zinc-air batteries due to low reserves, high prices and poor stability. Therefore, exploring high performance, low cost and high stability with dual functional catalysts is important for the development of rechargeable zinc-Air batteries. The metal-organic frameworks (MOFs) have high specific surface area, structural stability, good catalytic …

Wastewater Treatment Using Encapsulated Chabazite In Polyvinyl Alcohol-Sodium Alginate Hydrogel Biofilm Carriers, Susieanna Nevada Persaud

USF Tampa Graduate Theses and Dissertations

Nitrogen discharge from wastewater is a global issue and with increased urbanization as well as industrialization, it has become even more essential to develop more efficient wastewater treatment systems. The dominant form of nitrogen in wastewater is ammonium. Biological oxidation of ammonium to nitrite and nitrate is the first step in biological nitrogen removal processes. If left untreated, nitrogen can cause toxicity to aquatic life, unsafe changes in water quality, and eutrophication.

Biofilm carriers can help to improve the efficiency of traditional activated sludge wastewater treatment systems by reducing operating costs and reducing hydraulic retention time. Biofilm carriers also promote …

Experimental And Simulation Study Of Reactive Silver Ink Droplet Evaporation, Weipeng Zhang

Electronic Thesis and Dissertation Repository

The evaporation of particle-free silver ink droplets on heated substrates directly impacts the morphology of the resultant silver particles and films. In this thesis, COMSOL Multiphysics simulations of the solvent (water-ethylene glycol mixture) droplet evaporation process are used to explain the microflows, mass transfers, and heat distribution responsible for the experimental observations. The reactive ink incorporates fluoro-surfactant FS-31 and poly (acrylamide) (PAM) to suppress the coffee-ring effect that negatively impacts the electrical conductivity. Experiments show that the droplet evaporation process results in varied silver particle morphology, depending on the locations within the droplet, leading to uneven surfaces. Large particles (3 …

Planning For The Lake Izabal Basin Research Endeavor (Libre) Continental Scientific Drilling Project In Eastern Guatemala, Jonathan Obrist-Farner, Andreas Eckert, Peter M.J. Douglas, Liseth Perez, Alex Correa-Metrio, Bronwen L. Konecky, Thorsten Bauersachs, Susan Zimmerman, Stephanie Scheidt, Mark Brenner, Steffen Kutterolf, Jeremy Maurer, Omar Flores, Caroline M. Burberry

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

As Earth's atmospheric temperatures and human populations increase, more people are becoming vulnerable to natural and human-induced disasters. This is particularly true in Central America, where the growing human population is experiencing climate extremes (droughts and floods), and the region is susceptible to geological hazards, such as earthquakes and volcanic eruptions, and environmental deterioration in many forms (soil erosion, lake eutrophication, heavy metal contamination, etc.). Instrumental and historical data from the region are insufficient to understand and document past hazards, a necessary first step for mitigating future risks. Long, continuous, well-resolved geological records can, however, provide a window into past …

Ability Of Replacing The Steel Strands By Cfrp In Pre-Stressed Concrete Girders: Art Review, Ahmed Salim Edan, Wael Shawky Abdulsahib

Al-Esraa University College Journal for Engineering Sciences

Fiber-reinforced polymer (FRP) composites are the modern,trustworthy alternatives to steel tendons and rebars. The bulk of currentresearch is devoted to establishing the feasibility of incorporating carbonfibre-reinforced polymer (CFRP) into reinforced concrete girders byevaluating the strength and reliability of CFRP and concrete components.In order to improve fatigue and corrosion resistance, CFRPs are crucial.Comparing reinforced prestressed concrete bridge girders strengthenedwith conventional steel reinforcement to those reinforced with CFRPs offersthe possibility of greatly increasing service life. Also widely researchedand used in bridge engineering as a corrosion-resistant substitute for steelreinforcement is CFRP composite material. The use of carbon fiber-reinforcedplastic (CFRP) reinforcement for prestressing concrete …

Effect Of Fire Flame On Some Mechanical Properties Of Self-Compacting Concrete, Haider Sadiq M. Ali, Nabeel A-M. Albayati, Basman R. Mohammed, Adil M. Jabbar

Al-Esraa University College Journal for Engineering Sciences

This paper presents an experimental investigation of the effect of fire flame on self-compacting concrete. The experimental program included casting cylinder and prism concrete specimens for compressive strength, modulus of elasticity, modulus of rupture, and concrete density tests. The specimens are exposed to fire flame at 800 ºC approximately for 2 hours or 6 hours. Then the specimens were cooled either in a fast or slow manner. Test results show that the compressive strength was reduced by about (54 - 61)% for fire exposure of 6 hours and by (27 - 37)% for 2 hours of exposure and cooled slowly …

A Review Article On The Performance Based Seismic Design Of Structures, Reem Hatem Ahmed, Sahar Elaiwi, Shelan Hameed Ameen

Al-Esraa University College Journal for Engineering Sciences

For the most part, seismic design builds complex structural systems using the same small number of essential structural components as non-seismic design projects. Based on the building regulations, structures are frequently designed to "withstand" the largest earthquake with a given likelihood that is projected to happen at their location. This means that by avoiding structures from collapsing, the number of fatalities must be maintained to a minimal. Seismic design involves knowing the many failure modes regarding a structure and giving it the right stiffness, strength, ductility, and layout for ensuring that these modes do not take place. In this essay, …