Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Chemical Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 3001 - 3030 of 14130

Full-Text Articles in Engineering

Strategy For Conjugating Oligopeptides To Mesoporous Silica Nanoparticles Using Diazirine-Based Heterobifunctional Linkers, Md Arif Khan, Ramy W. Ghanim, Maelyn R. Kiser, Mahsa Moradipour, Dennis T. Rogers, John M. Littleton, Luke H. Bradley, Bert C. Lynn, Stephen E. Rankin, Barbara L. Knutson Feb 2022

Strategy For Conjugating Oligopeptides To Mesoporous Silica Nanoparticles Using Diazirine-Based Heterobifunctional Linkers, Md Arif Khan, Ramy W. Ghanim, Maelyn R. Kiser, Mahsa Moradipour, Dennis T. Rogers, John M. Littleton, Luke H. Bradley, Bert C. Lynn, Stephen E. Rankin, Barbara L. Knutson

Chemical and Materials Engineering Faculty Publications

Successful strategies for the attachment of oligopeptides to mesoporous silica with pores large enough to load biomolecules should utilize the high surface area of pores to provide an accessible, protective environment. A two-step oligopeptide functionalization strategy is examined here using diazirine-based heterobifunctional linkers. Mesoporous silica nanoparticles (MSNPs) with average pore diameter of ~8 nm and surface area of ~730 m2/g were synthesized and amine-functionalized. Tetrapeptides Gly-Gly-Gly-Gly (GGGG) and Arg-Ser-Ser-Val (RSSV), and a peptide comprised of four copies of RSSV (4RSSV), were covalently attached via their N-terminus to the amine groups on the particle surface by a heterobifunctional linker, …

Go to article

A Detailed Hydrodynamic Study Of The Split-Plate Airlift Reactor By Using Non-Invasive Gamma-Ray Techniques, Laith S. Sabri, Abbas J. Sultan, Hasan Shakir Majdi, Shadha K. Jebur, Muthanna H. Al-Dahhan Feb 2022

A Detailed Hydrodynamic Study Of The Split-Plate Airlift Reactor By Using Non-Invasive Gamma-Ray Techniques, Laith S. Sabri, Abbas J. Sultan, Hasan Shakir Majdi, Shadha K. Jebur, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study focused on detailed investigations of selected local hydrodynamics in split airlift reactor by using an unconventional measurements facility: computed tomography (CT) and radioactive particle tracking (RPT). The local distribution in a cross-sectional manner with its radial's profiles for gas holdup, liquid velocity flow field, shear stresses, and turbulent kinetic energy were studied under various gas velocity 1, 2 and 3 cm/s with various six axial level z = 12, 20, 40, 60, 90 and 112 cm. The distribution in gas-liquid phases in the whole split reactor column, the riser and downcomer sides, including their behavior at the top …

Go to article

Advancing The Development Of Additively Manufactured Sequentially Cured Interpenetrating Polymer Networks, Rachael J. Ross Feb 2022

Advancing The Development Of Additively Manufactured Sequentially Cured Interpenetrating Polymer Networks, Rachael J. Ross

Theses and Dissertations

Recently vat photopolymerization (VPP), a type of additive manufacturing (AM), has the potential to be used for a variety of commercial and military applications due to the ability to make custom parts rapidly and with complex geometries. Many commercially available photopolymerizable resins consist of (meth)acrylate and epoxy functionality to ensure rapid cure time and minimal shrinkage. Today, researchers continue to find the optimal balance of (meth)acrylate/epoxy functionality in unique formulations and network configurations, such as interpenetrating polymer networks (IPN)s, to enhance processibility and the quality of the final printed part. This work explores the structure-property relationships of a set of …

Go to article

Impurity Incorporation In Solution Crystallization: Diagnosis, Prevention, And Control, Gerard Capellades, Jacob O. Bonsu, Allan S. Myerson Feb 2022

Impurity Incorporation In Solution Crystallization: Diagnosis, Prevention, And Control, Gerard Capellades, Jacob O. Bonsu, Allan S. Myerson

Henry M. Rowan College of Engineering Departmental Research

Despite their widespread use for purification, our current methods for the development of solution crystallization processes lack a sufficient understanding on how impurities incorporate in growing crystals. This is, in part, due to the large number of mechanisms often encountered for impurity incorporation, and due to limitations in our methods for diagnosis of those mechanisms. These limitations propagate into largely empirical process development strategies, which are still based on trial and error and centered on solvent selection. This manuscript highlights recent developments in the diagnosis, prevention, and control of impurity incorporation during batch and continuous crystallization. The goal is to …

Go to article

Geant4 Simulation For Radioactive Particle Tracking (Rpt) Technique, Ahmed A. Alghamdi, Thaar M. Aljuwaya, Abdullah S. Alomari, Muthanna H. Al-Dahhan Feb 2022

Geant4 Simulation For Radioactive Particle Tracking (Rpt) Technique, Ahmed A. Alghamdi, Thaar M. Aljuwaya, Abdullah S. Alomari, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

In the past two decades, the radioactive particle tracking (RPT) measurement technique has been proven to visualize flow fields of most multiphase flow systems of industrial interest. The accuracy of RPT, and hence the data obtained, depend largely on the calibration process, which stands here as a basis for two subsequent processes: tracking and reconstruction. However, limitations in the RPT calibration process can be found in different experimental constrains and in assumptions made in the classical Monte Carlo approach used to simulate number of counts received by the detectors. Therefore, in this work, we applied a GEANT4-based Monte Carlo code …

Go to article

Understanding The Photodegradation Mechanism Of Gaseous Acetaldehyde Over Bi2wo6 – Modified Znwo4 Photocatalyst Under Uv Light Irradiation, Mirabbos Hojamberdiev, Ronald Vargas, Shahlo Daminova, Zuhra Kadirova Feb 2022

Understanding The Photodegradation Mechanism Of Gaseous Acetaldehyde Over Bi2wo6 – Modified Znwo4 Photocatalyst Under Uv Light Irradiation, Mirabbos Hojamberdiev, Ronald Vargas, Shahlo Daminova, Zuhra Kadirova

CHEMISTRY AND CHEMICAL ENGINEERING

Indoor air quality has a significant impact on human health as people spend more time indoors. As a common indoor air pollutant, acetaldehyde is considered toxic when exposed to it for a prolonged period. The aim of this study is the enhancement of the photocatalytic activity of ZnWO4 with a monoclinic wolframite structure for degradation of gaseous acetaldehyde by modifying its surface with Bi2WO6 layered structure. The mechanisms behind the enhanced photocatalytic activity and the pathways for acetaldehyde photodegradation over the Bi2WO6-modified ZnWO4 photocatalyst are discussed.

Go to article

Modelling Of Reаctive Distillаtion Process For Etherificаtion Reаction, Adham Norkobilov, Olimjon Mаksudov, Abdulaziz Bаkhtiyorov, Orifjon Zаripov, Abbos Elmаnov Feb 2022

Modelling Of Reаctive Distillаtion Process For Etherificаtion Reаction, Adham Norkobilov, Olimjon Mаksudov, Abdulaziz Bаkhtiyorov, Orifjon Zаripov, Abbos Elmаnov

CHEMISTRY AND CHEMICAL ENGINEERING

А reаctive distillаtion system is exаmined to produce for the production of Ethyl tert butyl ether (ETBE) viа etherificаtion of isobutene with ethаnol. Optimizаtion methods using heаt integrаtion аre аlso conducted. The molаr reflux rаtio аnd reboiler duty аre cаlculаted using sensitivity аnаlysis. The bottom streаm with the sаtisfied purity of ETBE is integrаted for heаting the feed streаm to the column. Heаt integrаtion from reаctor heаt to the initiаl feed streаm аnd from bottom streаm of the column to the column inlet streаm with the purpose of аchieving tаrget feed temperаture leаds to high conversion in the reаctive distillаtion …

Go to article

Laboratory Evaluation Of Placement Behavior Of Microgels For Conformance Control In Reservoirs Containing Superpermeable Channels, Yang Zhao, Baojun Bai Feb 2022

Laboratory Evaluation Of Placement Behavior Of Microgels For Conformance Control In Reservoirs Containing Superpermeable Channels, Yang Zhao, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Gel treatment has been proven an effective method to attack excessive water production in many mature oilfields. However, not all of the application projects have successful stories. The effectiveness of a gel treatment largely depends on the transport and placement behavior of gel materials in reservoirs to be treated. In this work, we carried out systematic studies to investigate the transport, placement, water-blocking ability, fluid diversion and sweep improvement, and matrix damage effect of micrometer-sized preformed particle gels (microgels) in reservoirs containing superpermeable (super-K) channels. The impact of the channel/matrix permeability contrast and the particle/pore size ratio in the channels …

Go to article

Synergistic Enhancement Of Formic Acid Electro-Oxidation On Ptxcuy Co-Electrodeposited Binary Catalysts, Yaser M. Asal, Ahmad M. Mohammad, Sayed S. Abd El Rehim, Islam M. Al-Akraa Feb 2022

Synergistic Enhancement Of Formic Acid Electro-Oxidation On Ptxcuy Co-Electrodeposited Binary Catalysts, Yaser M. Asal, Ahmad M. Mohammad, Sayed S. Abd El Rehim, Islam M. Al-Akraa

Chemical Engineering

A propitious binary catalyst composed of Pt and Cu which were electrodeposited simultaneously onto a glassy carbon (GC) substrate was recommended for the formic acid (FA) electro-oxidation reaction (FAOR); the principal anodic reaction in the direct FA fuel cells (DFAFCs). The simultaneous co-electrodeposition of Pt and Cu in the catalyst provided an opportunity to tune the geometric functionality of the catalyst to resist the adsorption of poisoning CO at the Pt surface that represented the major impediment for DFAFCs marketing. The catalytic activity of the catalyst toward FAOR was significantly influenced by the (Pt4+/Cu2+) molar ratio of the electrolyte during …

Go to article

Mass Advection–Diffusion In Creeping Flow Through An Orifice Plate: A Model For Nanoporous Atomically Thin Membranes, Harpreet Atwal, Anika Wong, Michael Boutilier Feb 2022

Mass Advection–Diffusion In Creeping Flow Through An Orifice Plate: A Model For Nanoporous Atomically Thin Membranes, Harpreet Atwal, Anika Wong, Michael Boutilier

Chemical and Biochemical Engineering Publications

Continuum transport equations are commonly applied to nanopores in atomically thin membranes for simple modeling. Although these equations do not apply for nanopores approaching the fluid or solute molecule size, they can be reasonably accurate for larger nanopores. Relatively large graphene nanopores have applications in small particle filtration and appear as unwanted defects in large-area membranes. Solute transport rates through these nanopores determine the rejection performance of the membrane. Atomically thin membranes commonly operate in a regime where advection and diffusion both contribute appreciably to transport. Solute mass transfer rates through larger nanopores have previously been modeled by adding continuum …

Go to article

Synthesis And Evaluation Of A Novel Polyacrylamide Functionalized Nano-Silica As A Calcium Carbonate Inhibitor In Upstream Applications, Nadhem Ismail, Ali Alshami, Ibnelwaleed A. Hussein Feb 2022

Synthesis And Evaluation Of A Novel Polyacrylamide Functionalized Nano-Silica As A Calcium Carbonate Inhibitor In Upstream Applications, Nadhem Ismail, Ali Alshami, Ibnelwaleed A. Hussein

Chemical Engineering Faculty Publications

Calcium carbonate scale forms in production and injection wells, precipitating upon pressure and temperature changes, incompatible water mixing, and dehydration. Production shutdown is one of the most dramatic consequences caused by calcium carbonate scale formation. We synthesized, characterized, and tested a polyacrylamide functionalized nano-silica (PAM-SiO2NPs) inhibitor that prevents calcium carbonate formation at high temperatures and high brine. Positive compatibility results were confirmed before the inhibition efficiency test, whereby the efficiency was calculated by quantifying the calcium ions left in solution using ICP-OES. The inhibitor was effective at temperatures of 40, 60, and 80 °C, with pH values of …

Go to article

Geant4 Simulation For Radioactive Particle Tracking (Rpt) Technique, Ahmed A. Alghamdi, Thaar M. Aljuwaya, Abdullah S. Alomari, Muthanna H. Al-Dahhan Feb 2022

Geant4 Simulation For Radioactive Particle Tracking (Rpt) Technique, Ahmed A. Alghamdi, Thaar M. Aljuwaya, Abdullah S. Alomari, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

In the past two decades, the radioactive particle tracking (RPT) measurement technique has been proven to visualize flow fields of most multiphase flow systems of industrial interest. The accuracy of RPT, and hence the data obtained, depend largely on the calibration process, which stands here as a basis for two subsequent processes: tracking and reconstruction. However, limitations in the RPT calibration process can be found in different experimental constrains and in assumptions made in the classical Monte Carlo approach used to simulate number of counts received by the detectors. Therefore, in this work, we applied a GEANT4-based Monte Carlo code …

Go to article

Flow Regimes In Gas-Solid Fluidized Beds Via Micro-Foil Heat Flux Sensor, Haidar Taofeeq, Sebastián Uribe, Muthanna H. Al-Dahhan Feb 2022

Flow Regimes In Gas-Solid Fluidized Beds Via Micro-Foil Heat Flux Sensor, Haidar Taofeeq, Sebastián Uribe, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

The flow regime transitions in a gas-solid fluidized bed were studied for the first time using a micro-foil heat flux sensor. The time series of heat flux signals was analyzed by statistical and state space methods. The experimental measurements were performed in a lab-scale gas-solid fluidization column. Four different flow regimes, i.e., fixed-bed flow regime, bubbling-flow regime, slugging-flow regime, and turbulent-flow regime, and three intermediate transition velocities, i.e., minimum fluidizing velocity or minimum bubbling velocity, minimum slugging velocity, and minimum turbulent velocity, were successfully identified. The method based on the analysis of heat flux sensor measurements allowed to determine accurately …

Go to article

Small-Pore Zeolite Membranes: A Review Of Gas Separation Applications And Membrane Preparation, Zishu Cao, Ninad Anjikar, Shaowei Yang Feb 2022

Small-Pore Zeolite Membranes: A Review Of Gas Separation Applications And Membrane Preparation, Zishu Cao, Ninad Anjikar, Shaowei Yang

Chemical & Biomedical Engineering Faculty Publications

There have been significant advancements in small-pore zeolite membranes in recent years. With pore size closely related to many energy- or environment-related gas molecules, small-pore zeolite membranes have demonstrated great potential for the separation of some interested gas pairs, such as CO2/CH4, CO2/N-2 and N-2/CH4. Small-pore zeolite membranes share some characteristics but also have distinctive differences depending on their framework, structure and zeolite chemistry. Through this mini review, the separation performance of different types of zeolite membranes with respect to interested gas pairs will be compared. We aim to give readers an idea of membrane separation status. A few representative …

Go to article

A Detailed Hydrodynamic Study Of The Split-Plate Airlift Reactor By Using Non-Invasive Gamma-Ray Techniques, Laith S. Sabri, Abbas J. Sultan, Hasan Shakir Majdi, Shadha K. Jebur, Muthanna H. Al-Dahhan Feb 2022

A Detailed Hydrodynamic Study Of The Split-Plate Airlift Reactor By Using Non-Invasive Gamma-Ray Techniques, Laith S. Sabri, Abbas J. Sultan, Hasan Shakir Majdi, Shadha K. Jebur, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study focused on detailed investigations of selected local hydrodynamics in split airlift reactor by using an unconventional measurements facility: computed tomography (CT) and radioactive particle tracking (RPT). The local distribution in a cross-sectional manner with its radial's profiles for gas holdup, liquid velocity flow field, shear stresses, and turbulent kinetic energy were studied under various gas velocity 1, 2 and 3 cm/s with various six axial level z = 12, 20, 40, 60, 90 and 112 cm. The distribution in gas–liquid phases in the whole split reactor column, the riser and downcomer sides, including their behavior at the top …

Go to article

Tracking The Heavy Metal Contaminants Entrained With The Flow Into A Trickle Bed Hydrotreating Reactor Packed With Different Catalyst Shapes Using Newly Developed Noninvasive Dynamic Radioactive Particle Tracking, Binbin Qi, Omar Farid, Alexandre França Velo, Jihane Mendil, Sebastián Uribe, Yasunobu Kaneko, Kei Sakakura, Yasuhito Kagota, Muthanna H. Al-Dahhan Feb 2022

Tracking The Heavy Metal Contaminants Entrained With The Flow Into A Trickle Bed Hydrotreating Reactor Packed With Different Catalyst Shapes Using Newly Developed Noninvasive Dynamic Radioactive Particle Tracking, Binbin Qi, Omar Farid, Alexandre França Velo, Jihane Mendil, Sebastián Uribe, Yasunobu Kaneko, Kei Sakakura, Yasuhito Kagota, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

A newly developed modified Dynamic Radioactive Particle Tracking system (DRPT) was used to investigate the heavy metal contaminants deposition locations in different catalyst beds, sphere, cylinder, trilobe, and quadrilobed in Trickle Bed Reactors. In the present paper, Kernel Density Estimator (KDE) was used to estimate the probability density distributions of heavy metal contaminants depositions in terms of bed radius height. The result shows that the four cases have similar probability density distribution in terms of radius, while the spherical catalyst has the larger distribution range in terms of bed height. The heavy metal deposition is directly related to the pressure …

Go to article

Asphaltene Thermodynamic Precipitation During Miscible Nitrogen Gas Injection, Mukhtar Elturki, Abdulmohsin Imqam Feb 2022

Asphaltene Thermodynamic Precipitation During Miscible Nitrogen Gas Injection, Mukhtar Elturki, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

For many years, miscible gas injection has been the most beneficial enhanced oil recovery method in the oil and gas industry. However, injecting a miscible gas to displace oil often causes the flocculation and deposition of asphaltenes, which subsequently leads to a number of production problems. Nitrogen gas (N2) injection has been used to enhance oil recovery in some oil fields, seeking to improve oil recovery. However, few works have implemented N2 injection and investigated its effect on asphaltene precipitation and deposition. This research investigated the N2 miscible flow mechanism in nanopores and its impact on asphaltene precipitations, which can …

Go to article

Heterogeneous Biodiesel Catalyst From Steel Slag Resulting From An Electric Arc Furnace, Mai H. Roushdy Feb 2022

Heterogeneous Biodiesel Catalyst From Steel Slag Resulting From An Electric Arc Furnace, Mai H. Roushdy

Chemical Engineering

Biodiesel is one of the most environmentally friendly and renewable fuels, as it is a non-polluting fuel and is made from living resources, such as vegetable oils. The steel industry generates a variety of solid wastes, including electric arc furnace slag (EAFS). The synthesis of biodiesel from waste sunflower cooking oil was examined in this study, utilizing EAFS as a catalyst, which mainly contains ferric and ferrous oxides, calcium oxide, and silica. To evaluate their impact on biodiesel production, four independent variables were chosen: temperature (50–70 ◦C), catalyst loading (1–5%), methanol-to-oil (M:O) molar ratio (5–20), and time (1–4 h). The …

Go to article

Concentration Polarization Controlin Stand-Alone And Hybrid Forward Osmosis Systems: Recent Technological Advancements And Future Directions, W. Suwaileh, Masoumeh Zargar, A. Abdala, F. A. Siddiqui, Mehdi Khiadani, A. Abdel-Wahab Feb 2022

Concentration Polarization Controlin Stand-Alone And Hybrid Forward Osmosis Systems: Recent Technological Advancements And Future Directions, W. Suwaileh, Masoumeh Zargar, A. Abdala, F. A. Siddiqui, Mehdi Khiadani, A. Abdel-Wahab

Research outputs 2022 to 2026

Forward osmosis (FO) has received significant attention recently. FO has high potentials for integration with other water treatment technologies. However, concentration polarization (CP) remains a significant challenge in FO membrane applications. In particular, internal CP (ICP) reduces the permeability of FO membranes by nearly 80%. The development of FO processes and their applications can greatly benefit from strategies that detect and control CP in standalone and integrated FO systems. This requires consideration of FO membrane structures, materials, configurations, operating conditions, and modification and cleaning strategies. This review provides a state-of-the-art analysis of recent literature on CP detection and control with …

Go to article

Experimental Evaluation Of Liquid Nitrogen Fracturing On The Development Of Tight Gas Carbonate Rocks In The Lower Indus Basin, Pakistan, Muhammad Ali, Abdul Majeed Shar, Aftab Ahmed Mahesar, Ahmed Al-Yaseri, Nurudeen Yekeen, Khalil Rehman Memon, Alireza Keshavarz, Hussein Hoteit Feb 2022

Experimental Evaluation Of Liquid Nitrogen Fracturing On The Development Of Tight Gas Carbonate Rocks In The Lower Indus Basin, Pakistan, Muhammad Ali, Abdul Majeed Shar, Aftab Ahmed Mahesar, Ahmed Al-Yaseri, Nurudeen Yekeen, Khalil Rehman Memon, Alireza Keshavarz, Hussein Hoteit

Research outputs 2022 to 2026

Tight gas carbonate formations have enormous potential to meet the supply and demand of the ever-growing population. However, it is impossible to produce from these formations due to the reduced permeability and lower marginal porosity. Several methods have been used to extract unconventional tight gas from these reservoirs, including hydraulic fracturing and acidizing. However, field studies have demonstrated that these methods have environmental flaws and technical problems. Liquid nitrogen (LN2) fracturing is an effective stimulation technique that provides sudden thermal stress in the rock matrix, creating vivid fractures and improving the petro-physical potential. In this study, we acquired …

Go to article

Design And Fabrication Of Nanostructured Electrodes For Complementary Electrochemical And Photoelectrochemical Water Splitting, Kholoud El Sayed Abousalem Jan 2022

Design And Fabrication Of Nanostructured Electrodes For Complementary Electrochemical And Photoelectrochemical Water Splitting, Kholoud El Sayed Abousalem

Theses and Dissertations

Designing highly active, durable, and nonprecious electrodes for overall water splitting is of urgent scientific importance to realize sustainable hydrogen production. Accordingly, the need to search efficient energy production systems is of crucial necessity. In this thesis, two various systems for sustainable hydrogen production have been reported using electrochemical and photoelectrochemical pathways. In the first part of the thesis, electrochemical water splitting involving both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) has been established. To this end, an innovative approach is demonstrated to synthesize flower-like 3D homogenous trimetallic Mn, Ni, Co phosphide catalysts directly on nickel foam via …

Go to article

Investigating The Variation In The Optical Properties Of Tio2 Thin-Film Utilized In Bifacial Solar Cells Using Machine Learning Algorithm, Ziad Khalifa, Sameh Abdellatif, Ahmed Fathi, Kareem Abdullah, Minatallah Hassan Jan 2022

Investigating The Variation In The Optical Properties Of Tio2 Thin-Film Utilized In Bifacial Solar Cells Using Machine Learning Algorithm, Ziad Khalifa, Sameh Abdellatif, Ahmed Fathi, Kareem Abdullah, Minatallah Hassan

Chemical Engineering

Among various solar cell architectures, dye-sensitized solar cells (DSSCs) and perovskite solar cells have demonstrated the capability of being bifacial as both can be fabricated on conducting glass electrodes. In both cells, TiO2 plays a key role in the optoelectronic properties of the cell. Various studies have reported a range of recipes and deposition techniques for TiO2 thin films. Such variety introduces some uncertainties into the optical properties of the prepared films as well as in the process repeatability. Here, we utilized machine learning methods to correlate the film porosity to the film refractive index, making it capable of studying …

Go to article

Synthesis Of Lithium-Rich Manganese-Based Layered Cathode Materials And Study On Its Structural Evolution Of First Cycle Overcharge, Chen-Xu Luo, Chen-Guang Shi, Zhi-Yuan Yu, Ling Huang, Shi-Gang Sun Jan 2022

Synthesis Of Lithium-Rich Manganese-Based Layered Cathode Materials And Study On Its Structural Evolution Of First Cycle Overcharge, Chen-Xu Luo, Chen-Guang Shi, Zhi-Yuan Yu, Ling Huang, Shi-Gang Sun

Journal of Electrochemistry

Lithium-rich manganese-based cathode materials have become one of promising cathode materials due to their low cost and large discharge specific capacity exceeding 250 mAh·g-1. However, their problems such as low coulombic efficiency of first cycle and apparent voltage decay influence commercialization process. The high charging voltage will cause instability of structure and increase the hidden danger of the battery. Therefore, structural evolution of first cycle at higher voltage needs to be further studied. In this work, the precursor was synthesized by the co-precipitation method, and the lithium-rich manganese-based layered cathode materials were prepared by lithium-mixed and high-temperature sintering, …

Go to article

Progress Of Pt-Based Catalysts In Proton-Exchange Membrane Fuel Cells: A Review, Long Huang, Hai-Chao Xu, Bi Jing, Qiu-Xia Li, Wei Yi, Shi-Gang Sun Jan 2022

Progress Of Pt-Based Catalysts In Proton-Exchange Membrane Fuel Cells: A Review, Long Huang, Hai-Chao Xu, Bi Jing, Qiu-Xia Li, Wei Yi, Shi-Gang Sun

Journal of Electrochemistry

Fuel cells are energy conversion devices that convert chemical energy directly into electricity. It has the advantages of high energy density, high utilization efficiency of fuel, clean and noiseless during working. Among all kinds of fuel cells, proton exchange membrane fuel cells (PEMFCs) are most popular since PEMFCs function at near ambient temperature, while their power densities are higher than those of other fuel cells. Currently, Pt-based nanomaterials are still the unreplaceable catalysts in commercialized PEMFCs. The lack of low-cost and high-performance cathode catalysts is still one of key factors that hampers the commercialization of PEMFCs. In this review, the …

Go to article

Advances Of Phosphide Promoter Assisted Pt Based Catalyst For Electrooxidation Of Methanol, Meng Li, Li-Gang Feng Jan 2022

Advances Of Phosphide Promoter Assisted Pt Based Catalyst For Electrooxidation Of Methanol, Meng Li, Li-Gang Feng

Journal of Electrochemistry

Transition metal phosphide (TMP), as an ideal catalytic promoter in methanol fuel oxidation, has received increased attention because of its multifunctional active sites, tunable structure and composition, as well as unique physical and chemical properties and efficient multi-composition synergistic effect. Some advances have been made for this catalyst system recently. In the current review, the research progresses of transition metal phosphides (TMPs) in the assisted electrooxidation of methanol including the catalysts fabrication and their performance evaluation for methanol oxidation are reviewed. The promotion effect of TMPs has been firstly presented and the catalyst systems based on the different metal centers …

Go to article

A High-Performance Continuous-Flow Mea Reactor For Electroreduction Co2 To Formate, Pei-Xuan Liu, Lu-Wei Peng, Rui-Nan He, Lu-Lu Li, Jin-Li Qiao Jan 2022

A High-Performance Continuous-Flow Mea Reactor For Electroreduction Co2 To Formate, Pei-Xuan Liu, Lu-Wei Peng, Rui-Nan He, Lu-Lu Li, Jin-Li Qiao

Journal of Electrochemistry

The electrochemical carbon dioxide reduction reaction (CO2RR) is a promising approach to produce liquid fuels and industrial chemicals by utilizing intermittent renewable electricity for mitigating environmental problems. However, the traditional H-type reactor seriously limits the electrochemical performance of CO2RR due to the low CO2 solubility in electrolyte, and high ohmic resistance caused by the large distance between two electrodes, which is unbeneficial for industrial application. Herein, we demonstrated a high-performance continuous flow membranes electrode assembly (MEA) reactor based on a self-growing Cu/Sn bimetallic electrocatalyst in 0.5 mol·L-1 KHCO3 for converting CO2 to …

Go to article

Oxidative Efficiency Of Ozonation Coupled With Electrolysis For Treatment Of Acid Wastewater, Ze-You Hu, Feng-Yun Xiang, Ji-Qiang Mao, Ya-Lei Ding, Shao-Ping Tong Jan 2022

Oxidative Efficiency Of Ozonation Coupled With Electrolysis For Treatment Of Acid Wastewater, Ze-You Hu, Feng-Yun Xiang, Ji-Qiang Mao, Ya-Lei Ding, Shao-Ping Tong

Journal of Electrochemistry

Establishment of an ozone-based advanced oxidation process (AOPs-O3) for effective treatment of acid wastewater is an important and difficult task. The process of ozonation coupled with electrolysis (electrolysis-ozonation, E-O3) has been reported to effectively degrade pollutants in neutral solution. We studied the efficiency of E-O3 for degradation of acetic acid (HAc, an ozone inert chemical) in acid solution and found that E-O3 had high oxidative efficiency at pH less than 3. For example, 52.2% of 100 mg·L-1 HAc could be removed by E-O3 in 120 min at pH 1.0, but only 2.2% …

Go to article

Heteroaggregation Of Lignin-Zein Nanoparticles: Effects Of Relative Size And Concentration, Yada Chulakham Jan 2022

Heteroaggregation Of Lignin-Zein Nanoparticles: Effects Of Relative Size And Concentration, Yada Chulakham

LSU Master's Theses

Nanotechnology has become an advanced tool for manufacturing materials of the future. As the size of a material is reduced to a nanoscale, its surface area to volume ratio increases drastically, and its surface property becomes size dependent. This allows scientists to make use of unique properties that nanomaterials have to offer to create novel materials that otherwise could not have been achieved in meter-scale materials. As more industrial companies have planned to incorporate different types of nanomaterials into their products, it is undeniable that some of these nanomaterials will be released to the environment. Such possibility has led to …

Go to article

Alf3-Al2o3 Ald Thin-Film-Coated Li1.2mn0.54co0.13ni0.13o2 Particles For Lithium-Ion Batteries: Long-Term Protection, Han Yu, Xiaoqing He, Xinhua Liang Jan 2022

Alf3-Al2o3 Ald Thin-Film-Coated Li1.2mn0.54co0.13ni0.13o2 Particles For Lithium-Ion Batteries: Long-Term Protection, Han Yu, Xiaoqing He, Xinhua Liang

Chemical and Biochemical Engineering Faculty Research & Creative Works

Improving the performance of existing cathode materials of lithium-ion batteries (LIBs) through surface modification has been proven to be an effective way to improve the performance of LIBs. However, it is a challenge to use a traditional method to prepare an effective coating film, which meets the requirements of uniformity, continuity, electrochemical stability, and strong mechanical properties. In this study, an ultrathin AlF3-Al2O3 film was coated on the surface of Li1.2Mn0.54Co0.13Ni0.13O2 (LRNMC) particles by atomic layer deposition (ALD) in a fluidized bed reactor. A cathode electrolyte …

Go to article

Examining The Effect Of A Chitosan Biopolymer On Alkali-Activated Inorganic Material For Aqueous Pb(Ii) And Zn(Ii) Sorption, Sukanta K. Mondal, Chenglin Wu, Felix C. Nwadire, Ali A. Rownaghi, Aditya Kumar, Yusuf Adewuyi, Monday Uchenna Okoronkwo Jan 2022

Examining The Effect Of A Chitosan Biopolymer On Alkali-Activated Inorganic Material For Aqueous Pb(Ii) And Zn(Ii) Sorption, Sukanta K. Mondal, Chenglin Wu, Felix C. Nwadire, Ali A. Rownaghi, Aditya Kumar, Yusuf Adewuyi, Monday Uchenna Okoronkwo

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Biopolymers and alkali-activated materials have attracted a great deal of attention as adsorbents for the removal of heavy metal contaminants from aqueous solutions. Both materials are sustainable and feature unique properties, but biopolymers are relatively more expensive or difficult to prepare and exhibit low mechanical and surface properties, a narrow pH range, and thermal stability. In this study, hybrid adsorbents were prepared from both types of material, by alkali activation of low-cost fly ash precursors accompanied by incorporation of 0-2%mass chitosan biopolymer. Two types of alkaline activating solutions, NaOH and Na2SiO3, were employed to generate two sets of hybrid adsorbents …

Go to article

First Prev Next Last