Engineering Commons^™

The Biological Activity Of Dual-Responsive Glycopolymers For Intracellular Codelivery Of Antigen And Lipophilic Adjuvant, Micaela Shields

Honors Theses

Subunit vaccines present themselves as an attractive alternative to traditional approaches to vaccines, which utilizes whole organisms to trigger an immune response. While these traditional approaches have proven themselves reliable within the history of vaccinations, they generally deliver subpar robust cellular-mediated immunity and pose many safety risks. Composed of proteins and /or peptides, subunit vaccines are safer and more precise alternatives to traditional approaches. However, the pharmacokinetic properties of the macromolecules that make up these vaccines hinder the subunit vaccine’s level of immunogenicity [d1] Examples of this hindrance include but are not limited to aggregation at the injection site and …

Antimicrobial Activity And Mechanism Of Amyloid Proteins And Synthetic Conjugated Polyelectrolytes, Fahimeh Maghsoodi

Nanoscience and Microsystems ETDs

Although the exact cause of Alzheimer’s disease (AD) is still unknown, it is widely considered that the accumulation of amyloid plaques composed of the amyloid-β (Aβ) peptide in the brain is linked to neurodegeneration. Co-localization of viral DNA with Aβ plaques, the association of brain infection and AD, and research indicating the protective effect of Aβ against bacteria and fungi in mice and human cells have led to the hypothesis that Aβ expression and deposition may be central to its function as an antimicrobial peptide (AMP). In my thesis research, we seek to elucidate how Aβ functions as an AMP …

An Analysis Of The Production Of Pharmaceutical-Grade Acetone Via The Dehydrogenation Of Isopropanol (Ipa), Jordan Desplas

Honors Theses

The production of 99.9 wt% acetone from isopropanol in Unit 1100 is designed to start up in 2025 and operate for 12 years after startup. The engineering team was tasked with designing the process, creating an economic model, and optimizing the net present value (NPV). The process was simulated in AVEVA PRO/II Simulation for the design process, and the economic analysis was estimated in Microsoft Excel. Parametric and topological optimization was performed linearly on the unit operations in the process. The NPV was improved by $14M from a base case of $122M to an optimized case of $136M. The project …

Optimization Of A Fluidized Bed Reactor For The Production Of Acetone From Isopropyl Alcohol, Andrew Rawls Wasson

Honors Theses

For the optimization of the isopropyl alcohol to acetone process, Unit 1100, the Net Present Value (NPV) was used as the objective function to observe the economic impact of each of the optimization factors being tested. During the optimization process, it is not only important to optimize the process’s profitability but also to ensure that the process operates efficiently and meets product specifications. The goal of this optimization was to alter variables from the base case calculations of Unit 1100 to maximize the NPV of the unit. AVEVA ProII software was used to simulate the process and make changes to …

Development Of Novel Sensor Coating Methodology To Enable Understanding Of Fouling Mechanisms On Ion Exchange Membranes, Andrew Ulmer

Honors Theses

As populations expand and natural water resources are depleted, severe droughts and limited access to clean water have become an increased threat to areas across the world. Effective and economic water treatment methods such as electrodialysis (ED) are vital for combating these threats, especially in developing nations and secluded locations. Organic foulant adsorption on the surface of ion exchange membranes severely limits the capabilities of water desalination systems such as ED along with significantly increasing maintenance costs. Understanding characteristics such as the total amount and rate at which these foulants at specific concentrations adsorb and desorb to the membranes is …

Effects Of Alternative Jet Fuels On Aerospace-Grade Composites: Experimental And Modeling Studies, Naoufal Harich

Theses and Dissertations

The aviation industry aims to reduce its environmental impact through innovation and research. The usage of composite materials for multiple primary structures represents one such measure. Several alternative fuels were approved and used along with the Federal Aviation Administration (FAA). These alternative fuels are produced from wastes and biomasses. Some alternative fuels were initially only approved as drop-in fuels, meaning they must be blended with conventional fuels to operate. Fuel tanks are usually embedded into the wing structure, which is mainly made of composite materials. These composites tend to absorb fluids it encounters through their matrix phase. The absorption behavior …

Monitoring Pm2.5 Pollution In The North End Of Hartford, Ct, Jocelyn Phung, Kristina Wagstrom

Honors Scholar Theses

Particulate matter (PM) or particle pollution is one of the six criteria air pollutants that can cause harm to human health and the environment; yet, there is a lack of data in many areas of the United States. Particulate matter is a mixture of solid particles and liquid droplets suspended in the air (EPA). Exposure to PM2.5 has been linked to respiratory and cardiovascular conditions. People who live in urban areas are more likely to be exposed to particulate matter as many urban areas are known to have poor air quality. Our goal is to determine how particulate matter levels …

The Design Estimate Of A Warehouse Refrigeration System, Jackson Dear

Honors Theses

The intention of this project was to provide a design and cost estimate for the refrigeration systems within an industrial cold storage distribution center for Magnolia Country Frozen Foods, Inc. in East Rutherford, NJ. The facility includes eighteen 300,000 ft3 units (200 ft x 100 ft x 15 ft). These units require 200 tons of refrigeration at a maintained temperature of 0oF. This project's scope included choosing an optimal refrigeration system, selecting a refrigerant for use within the system, and providing a cost estimate for the purchase of the refrigeration system equipment and for the yearly cost associated with running …

Microwave Regeneration And Thermal And Oxidative Stability Of Imidazolium Cyanopyrrolide Ionic Liquid For Direct Air Capture Of Carbon Dioxide, Yun-Yang Lee, Eda Cagli, Aidan Klemm, Ruth Dikki

Faculty Scholarship

Understanding the oxidative and thermal degradation of CO2 sorbents is essential for assessing long-term sorbent stability in direct air capture (DAC). The potential degradation pathway of imidazolium cyanopyrrolide, an ionic liquid (IL) functionalized for superior CO2 capacity and selectivity, is evaluated under accelerated degradation conditions to elucidate the secondary reactions that can occur during repetitive absorption-desorption thermal-swing cycles. The combined analysis from various spectroscopic, chromatographic, and thermal gravimetric measurements indicated that radical and SN2 mechanisms in degradation are encouraged by the nucleophilicity of the anion. Thickening of the liquid and gas evolution are accompanied by 50 % reduction in CO2 …

Exploring Methods For Recycling Filament Waste In 3d Printing, Max Rios Carballo

Publications and Research

The goal of the current study is to investigate cutting-edge techniques for recycling filament waste from 3D printing procedures. Appropriate waste management techniques are required to reduce this trash's harmful environmental consequences. The goal of the project is to look at new methods for recycling filament waste in order to minimize disposal and encourage reuse. To acquire data from pertinent papers and research, a thorough literature review methodology was used. The findings show that this issue may be resolved utilizing a variety of recycling techniques, including shredding, melting, and re-extrusion. The type of filament waste and the intended goal will …

Enhancing Compatibility And Mechanical Properties Of Natural Rubber Composites, Krisma Yessi Sianturi, Adam Febriyanto Nugraha, Belle Kristaura, Mochamad Chalid

Journal of Materials Exploration and Findings

Pure natural rubber (NR) exhibits low mechanical properties, necessitating the incorporation of additives like vulcanizing agents and fillers. Carbon black and silica, conventional fillers, are relatively expensive and not environmentally friendly. This study explores using Oil Palm Empty Fruit Bunch (OPEFB) fiber as an affordable, abundant, and biodegradable alternative filler for NR. However, compatibility issues arise between the nonpolar NR and the polar OPEFB fiber. A latex-starch hybrid coupling agent (CA (NR-St)) was added to the composite formulation to address this. NR, OPEFB fiber, and the coupling agent were mixed using an open roll mill with a 10 phr OPEFB …

Characterizing The Influence Of The Moc Support For The Pt Single Atom Catalyst For The Water Gas Shift Reaction, Kathryn Mcgee

Honors College Theses

In this report, we looked at characterizing the effect of the support (MoC) for the water gas shift (WGS) environment. The single-atom catalyst analyzed was platinum supported in molybdenum carbide. The primary focus of this report was CO* because of the strong interest in using the WGS reaction to convert CO* contamination. All calculations were performed using the density functional theory (DFT) method. We analyzed the binding energies for the different adsorbates, with a special emphasis on CO and charges of the support. We compared our results to Pt/Al₂O₃ support. We observed that the support, specifically MoC …

Autonomous Raman Hyperspectral Imaging And Analysis; Advances Towards Mapping Crystalline Character In Biologically Important Polymers, Sadeq H. Alkhalifa

ETD Archive

Poly-l-lactic acid has been of a great interest to the medical profession in recent years because of its biodegradability and biocompatibility. The biodegradation rate can be controlled by its crystallinity content. One method to modify its crystallinity content is by cold drawing. Raman spectroscopy is utilized to distinguish between the different crystalline content on the sample. However, a chemical imaging method is needed to characterize the polymer on the macro level. Chemical imaging using Raman spectroscopy is an important method of characterization that is non-invasive and non-destructive. The emphasis of my research has been to develop a method to characterize …

Novel Microdevices To Analyze Toxic Volatile Organic Compounds., Sujoy Halder

Electronic Theses and Dissertations

There has been a growing interest to measure volatile organic compounds (VOCs) in a range of environmental applications. The presence of toxic VOCs in the air has been associated with serious health problems including asthma, central nervous system dysfunction, cardiovascular disease and cancer, etc. Different analytical instruments such as gas chromatography-mass spectrometry (GC-MS) and sensor systems, such as metal oxide sensors are used to analyze VOCs. However, challenges still exist in the detection of airborne VOCs because of their trace concentration and interference with complex gas mixtures. In this dissertation, two microfabricated devices, a sensor array and a micropreconcentrator were …

Synthesis, Property Tuning And Degradation Studies Of Phosphorene-Based Materials., Usman Onuminya Abu

Electronic Theses and Dissertations

Two-dimensional (2D) layered materials have sparked the interest of researchers because of their interesting properties drawn from quantum confinement effects, elevated density of states (DOS), increased surface area, increased active sites, etc. Phosphorene, an interesting addition to the 2D material family in 2014, has interesting properties such as in-plane anisotropy, elevated carrier mobility and thickness-dependent bandgaps that have made it a material of intense interest. Furthermore, there have been theoretical studies predicting that phosphorene could be made even more versatile by intercalating alkali atoms into its layers. Intercalation has proven to be a veritable tool for synthesis, modification, transformation, and …

Compositional Engineering Of Precursor Inks For Intense Pulsed Light Compatible Deposition Of Perovskite Solar Cells., Blake Martin

Electronic Theses and Dissertations

Perovskite solar cell (PSC) technology offers a promising alternative to silicon-based photovoltaics (PVs), but challenges of stability, module efficiency, and scalability hinder commercialization. This study aims to explore potential solutions to overcome scalability and cost limitations of PSCs, addressing technical barriers to commercialization. We adapt the conventional three-stage perovskite deposition process (deposition, translational phase formation, and annealing) for scalable platforms using wide-area depositions, meniscus coating methods, forced laminar airflow drying, and radiative annealing methods, making it more suitable for roll-to-roll fabrication. A technoeconomic analysis shows that large-scale operations can produce solar films at a cost of $0.04-$0.10 per watt, making …

Chloramine Devulcanization Of Waste Rubber., Patrick Kroeger

Electronic Theses and Dissertations

The disposal of waste rubber, particularly tire rubber, continues to pose a challenge in the 21st century. As a result, most end-of-life tires (ELTs) are either dumped in landfills or burned as tire-derived fuel. Chloramine devulcanization may offer a viable solution to this problem. Chloramine devulcanization is a low-temperature, low-pressure, process that selectively breaks sulfur crosslinks while preserving the polymer backbone. Chloramine devulcanization enables the recovery of chloramine recovered carbon black (CrCB) and devulcanized rubber (CdR) as separate products. Initial analysis of CdR revealed that it was formable and malleable, suggesting that crosslinking was absent. Spectroscopy showed that CdR contained …

Transport Phenomena With Reactions In Drug Delivery: Towards A Quantitative Description, Xianjie Qiu, Parthasakha Neogi

Chemical and Biochemical Engineering Faculty Research & Creative Works

A Distributed System Called a Krogh Cylinder is Used Here to Quantify the Transport of a Solute from the Capillary into the Extravascular Tissue. the Capillary Network is Broken Down into Cylindrical Cells, Each Containing a Capillary and an Appropriate Amount of Extravascular Tissue. the Flow in the Cylinder Model Has Two-Dimensional Velocities, Which Are in the Axial and Radial Directions. All Parameters of the System, together with the Geometric Ones, Have Been Included in the Model. for a Given Bioavailability, the Uptakes of Reactive and Nonreactive Solutes Have Been Obtained. Very Large or Massive Molecules Have Been Considered. the …

Dual Crosslinked Poly(Acrylamide-Co-N-Vinylpyrrolidone) Microspheres With Re-Crosslinking Ability For Fossil Energy Recovery, Jingyang Pu, Baojun Bai, Jiaming Geng, Na Zhang, Thomas Schuman

Chemical and Biochemical Engineering Faculty Research & Creative Works

Microspheres have been proposed to be applied in controlling wastewater production for mature oilfields and migrating leakage for gas and nuclear waste storage. However, it remains challenging for stacked microspheres to maintain strong blocking ability in micron-sized small pores or fractures. in this study, a novel microsphere was developed with comprehensive properties including high deformability and long re-crosslinking time upon tunable swelling ratio for the applications. a dual covalent and physical crosslinking strategy was used to develop novel microspheres reinforced by a hydrogen bond (H-bond, between pyrrole ring and amide group) and coordination bond (between chromium acetate (CrAc) and carboxyl …

A Comparison Of Optical Measurement Methods For The Growth Of S. Cerevisiae, Jackson Black

Chemical Engineering Undergraduate Honors Theses

Genetic engineering of living organisms provides the opportunity to express and harvest different proteins from cell surfaces. Yeast (S. cerevisiae) is one such organism and is capable of being grown on an industrial scale. Cellular concentration is an important parameter to monitor while fermentation processes are underway, in order to control the environment inside the growth medium and maximize yields. Spectrophotometry is a conventional method for measuring concentration, but is limited by a narrow absorbance range, and the need for on-site periodic sampling. A continuous method of measurement, as provided by Bug Labs BE2100 non-invasive biomass monitor, would …

Catalytical Performance Of Heteroatom Doped And Undoped Carbon-Based Materials, Jahangir Alom, Md Saif Hasan, Md Asaduzaman, Mohammad Taufiq Alam, Dalel Belhaj, Raja Selvaraj, Md Ashraf Hossain, Masoumeh Zargar, Mohammad Boshir Ahmed

Research outputs 2022 to 2026

Developing cost-effective, eco-friendly, efficient, stable, and unique catalytic systems remains a crucial issue in catalysis. Due to their superior physicochemical and electrochemical properties, exceptional structural characteristics, environmental friendliness, economic productivity, minimal energy demand, and abundant supply, a significant amount of research has been devoted to the development of various doped carbon materials as efficient catalysts. In addition, carbon-based materials (CBMs) with specified doping have lately become significant members of the carbon group, showing promise for a broad range of uses (e.g., catalysis, environmental remediation, critical chemical production, and energy conversion and storage). This study will, therefore, pay attention to the …

Battery Design, Construction, And Characterization For Small Motor Use Focusing On Anodic Zinc For Electron Flow, Amber Veach

Chemical Engineering Undergraduate Honors Theses

This thesis explores the construction, characterization, and application of anodic zinc batteries for powering a small electric motor for the ChemE Car competition. Two zinc galvanic cell batteries were studied: zinc-carbon and zinc-air batteries. Prototype batteries were constructed and tested for voltage, amperage, and power production. In the zinc-carbon trials, a 3:1 mixture of manganese dioxide and graphite was determined to be the best cathode for power production. The size which allowed for sufficient power while maintaining the smallest footprint on the car was a zinc can six cm tall and two cm in diameter. Analysis of paper zinc-air battery …

Interactions And Phenomena Between Disodium Cromoglycate And Polyelectrolytes, Brandon Tipton

Chemical Engineering Undergraduate Honors Theses

The interactions between polyelectrolytes and oppositely charged macroions have been widely studied, but few reports have been made on the interaction between chromonic mesogens and polyelectrolytes. Here, we report on the formation of liquid crystalline coacervates achieved by the liquid-liquid phase separation of an aqueous solution of negatively charged liquid crystal and polycations. As well as the occurrence of tactoids that form in the absence of these interactions. The liquid crystal that is experimented with is disodium cromoglycate, better known as DSCG. This acts as a negative charge that is paired with a variety of positively charged polyelectrolytes. The first …

Probing The Structure Of Water On Surfaces: From Water Absorption To Ice Nucleation, Jiarun Zhou

All Dissertations

Water, essential for all life forms, is the most abundant, simple, yet mysterious molecule in the world. This molecule, consisting of only three atoms, behaves in unexpectedly different ways with the change of environment. In the past, studies of water under different conditions (temperature, pressure, on the surfaces, with confinement) have been conducted using experimental and computational methods. However, the influence of a given environment on water properties is yet to be fully understood. This dissertation studies water at complex interfaces (surfaces with various chemistry and physics properties) in both the liquid and crystalline states. Various heterogeneous systems used to …

Investigation Of Light Management Strategies And Photochemistry Of Si/Tio2 Tandem Microwire Slurries For Solar Hydrogen Generation., Saumya Gulati

Electronic Theses and Dissertations

The intermittent nature of the Sun makes it difficult to use it as a primary source of electricity and often needs to be supplemented by electricity from the grid which comes from fossil fuels. This motivates the need for solar energy storage. Photoelectrochemical (PEC) water-splitting has been explored as a means to convert solar energy into hydrogen (and oxygen), which can be stored as fuel. The current method of coupling PV and electrolyzer units has been widely commercialized, however, the cost of H₂ generated is far from the target of $1/kg set by the DOE under the Energy EarthShot …

Dual Crosslinked Poly(Acrylamide-Co-N-Vinylpyrrolidone) Microspheres With Re-Crosslinking Ability For Fossil Energy Recovery, Jingyang Pu, Baojun Bai, Jiaming Geng, Na Zhang, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Microspheres have been proposed to be applied in controlling wastewater production for mature oilfields and migrating leakage for gas and nuclear waste storage. However, it remains challenging for stacked microspheres to maintain strong blocking ability in micron-sized small pores or fractures. In this study, a novel microsphere was developed with comprehensive properties including high deformability and long re-crosslinking time upon tunable swelling ratio for the applications. A dual covalent and physical crosslinking strategy was used to develop novel microspheres reinforced by a hydrogen bond (H-bond, between pyrrole ring and amide group) and coordination bond (between chromium acetate (CrAc) and carboxyl …

Repeated Low-Level Blast Exposure Alters Urinary And Serum Metabolites, Austin Sigler, Jiandong Wu, Annalise Pfaff, Olajide Adetunji, Paul Ki-Souk Nam, Donald James, Casey Burton, Honglan Shi

Chemistry Faculty Research & Creative Works

Repeated exposure to low-level blast overpressures can produce biological changes and clinical sequelae that resemble mild traumatic brain injury (TBI). While recent efforts have revealed several protein biomarkers for axonal injury during repetitive blast exposure, this study aims to explore potential small molecule biomarkers of brain injury during repeated blast exposure. This study evaluated a panel of ten small molecule metabolites involved in neurotransmission, oxidative stress, and energy metabolism in the urine and serum of military personnel (n = 27) conducting breacher training with repeated exposure to low-level blasts. The metabolites were analyzed using HPLC—tandem mass spectrometry, and the Wilcoxon …

Detection Of Toxic Aldehydes In Aerosols Of Electronic Cigarettes., Ellie Bess Reed

Electronic Theses and Dissertations

Over the past decade, use of electronic cigarettes (e-cigarettes) has increased in the younger generations of the United States. With the broad range of flavors and devices distributed on the market, American youth are prime marketing targets for the e-cigarette industry. To create a more regulated market, research of this thesis has been conducted on newer generations of e-cigarette “MOD” devices to examine how e-cigarette battery power output and coil temperature, concentrations of propylene glycol and vegetable glycerin, added flavorings (strawberry, mango, and menthol), and the presence of nicotine affect generation of aerosol particles and aldehydes in aerosols emitted by …

The Study Of Corrosion On Additive-Manufactured Metals., Braydan Daniels

Electronic Theses and Dissertations

The purpose of this study was to investigate and compare the corrosion mechanisms between wrought and additive-manufactured (3D-printed) copper and stainless steel. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, Tafel analysis, surface topology, and scanning electron microscopy for each metal within salt water, tap water, sulfuric acid, and synthetic body fluid (excluding copper in synthetic body fluid).

Overall, printed stainless steel was more corrosion-resistant than wrought stainless steel in tap water and synthetic body fluid based on OCP, LSV, and surface topology results. Additionally, printed copper was more corrosion-resistant than wrought …

A Molecular Dynamics Study Of Structural Modifications Of Perarylphosphonium Based Ionic Liquids On The Melting Point, Johnathan Anderson

Graduate Theses and Dissertations (2019 - present)

Several perarylphosphonium based mesothermal ionic liquids (ILs) have been shown to be stable at high temperatures for prolonged periods of time and with high heat capacities making them good candidates for use in many processes such as usage as a heat transfer fluid, as an absorbent for separation of aromatics from aliphatics, and as a solvent for high temperature reactions. Many, however, have melting points above 100^o C, limiting their use. Recently, it was shown that the melting point of an IL can be lowered by simply increasing the dipole moment of the cation or by structurally rigidifying the …