Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Chemical Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 11221 - 11250 of 14130

Full-Text Articles in Engineering

Evaluation Of New Methods For Processing Drilling Data To Determine The Cause Of Changes In Bit Performance, Jaime Solano Jan 2004

Evaluation Of New Methods For Processing Drilling Data To Determine The Cause Of Changes In Bit Performance, Jaime Solano

LSU Master's Theses

Drilling operations represent the major cost in finding and developing new petroleum reserves. Poor drilling performance when drilling deep shale and strong rocks, as evidenced by slow rate of penetration (ROP), has a significant detrimental impact on drilling costs. Also, it has been concluded that bit balling is the main cause of low ROP when drilling deep, clay-rich shale with water-based mud. In addition, it is estimated that a potential saving in drilling cost of hundreds of millions of dollars a year can be obtained if bit balling is mitigated and ROP is improved. Several methods have been developed in …

Go to article

Electrodeposition Of Feconicu Quaternary System, Qiang Huang Jan 2004

Electrodeposition Of Feconicu Quaternary System, Qiang Huang

LSU Doctoral Dissertations

Electrodeposition is a cost-effective method to produce thin film materials, which have been used widely in the microelectronic industry, and is advantageous to fabricate metal deposits into recessed and curved areas. In this dissertation, FeCoNiCu quaternary alloy system was investigated, both experimentally and theoretically, for fabrication of multilayers, grating structures, and nanowires. Multilayer structures are composed of alternating ferromagnetic and nonmagnetic nanometric layers, and are of interest due to the giant magnetoresistance (GMR) property it possesses, a change in electric resistance in the presence of an external magnetic field. In addition, the compositional modulation, or the composition contrast, in multilayer …

Go to article

Chemical Production Complex Optimization, Pollution Reduction And Sustainable Development, Aimin Xu Jan 2004

Chemical Production Complex Optimization, Pollution Reduction And Sustainable Development, Aimin Xu

LSU Doctoral Dissertations

The objective of this research is to propose, develop and demonstrate chemical production complex optimization to determine the optimal configuration of chemical plants in a superstructure of possible plants. The Chemical Complex Analysis System is a new methodology that has been developed to determine the best configuration of plants in a chemical production complex based on the AIChE Total Cost Assessment (TCA) for economic, energy, environmental and sustainable costs. All new, energy-efficient, and environmentally acceptable plants using greenhouse gases that can produce potentially commercial products designed with HYSYS were integrated into the chemical complex using the System. The optimum configuration …

Go to article

Ceria-Zirconia Oxide High Temperature Desulfurization Sorbent, Kwang Bok Yi Jan 2004

Ceria-Zirconia Oxide High Temperature Desulfurization Sorbent, Kwang Bok Yi

LSU Doctoral Dissertations

High temperature desulfurization of highly reducing coal-derived gases using ceria and ceria-zirconia sorbents is the primary object of this dissertation research. If H2S concentration is reduced to less than 1 ppmv the product gas may be used with fuel cells and downstream catalytic process. CeO2 is reduced to a non-stoichiometric oxide, which is superior to CeO2 in removing H2S. Moreover, ZrO2 addition to CeO2 to form a solid solution, Ce1-xZrxO2, increases the reducibility of CeO2. This should also result in improved desulfurization performance. Pure CeO2 and sorbents, both commercially available and prepared at LSU, were tested. XRD analysis indicated that …

Go to article

A Re-Evaluation Of Geopressured-Geothermal Aquifers As An Energy Resource, Jeremy Scott Griggs Jan 2004

A Re-Evaluation Of Geopressured-Geothermal Aquifers As An Energy Resource, Jeremy Scott Griggs

LSU Master's Theses

The search for more efficient and economical forms of energy generation is a continual process. Natural gas production and electricity generation from geopressured-geothermal aquifers is an unconventional hydrocarbon source that has long been unproductive due to its marginal economics and lack of technological certainty. This thesis demonstrates that, based on modern technological competencies and economic constraints, geopressured-geothermal energy now maintains a viable future as an alternative domestic energy source.

Go to article

Development And Integration Of New Processes Consuming Carbon Dioxide In Multi-Plant Chemical Production Complexes, Sudheer Indala Jan 2004

Development And Integration Of New Processes Consuming Carbon Dioxide In Multi-Plant Chemical Production Complexes, Sudheer Indala

LSU Master's Theses

New, energy-efficient and environmentally acceptable, catalytic processes have been identified that can use excess high purity CO2 as a raw material from the sources available in a chemical production complex. The chemical complex in the lower Mississippi River Corridor has been used to show how these new plants can be integrated into this existing infrastructure using the Chemical Complex and Cogeneration Analysis System. Eighty six published articles of laboratory and pilot plant experiments were reviewed that describe new methods and catalysts to use CO2 for producing commercially important products. Reactions have been categorized as hydrogenation reactions; hydrocarbon synthesis …

Go to article

Trajectory And Window Width Predictions For A Cased Hole Sidetrack Using A Whipstock, Harshad Prakash Patil Jan 2004

Trajectory And Window Width Predictions For A Cased Hole Sidetrack Using A Whipstock, Harshad Prakash Patil

LSU Master's Theses

The Trackmaster system manufactured by Smith Services consists of a multi-ramped whipstock and a trimill assembly used to perform a sidetrack from a cased well. Smith Services has observed evidence that the trimill assembly may prematurely leave the face of the whipstock and build excess inclination and dogleg severity or may fall into the original well immediately after leaving the end of the whipstock ramp thus creating a need to predict the borehole trajectory for sidetracking operations. The goal of this project was to predict the borehole trajectory and the window profile cut in the casing by the sidetracking equipment …

Go to article

Closed Material Cycles And Organic Solvent Recovery, Tim De Jong Jan 2004

Closed Material Cycles And Organic Solvent Recovery, Tim De Jong

Theses

A survey was conducted of the pharmaceutical sector in Ireland to establish organic solvent usage, recovery and treatment practices. The eleven companies covered by the survey, which included several of the worlds largest multinational companies, consumed in the region of 122,000 tonnes of organic solvent in 2002. Approximately 53,000 tonnes was recovered on-site while 69,000 tonnes of virgin solvent was brought on-site to replace that which was lost through wastewater treatment, incineration, fugitive emissions and off-site treatment or reuse. The total quantity of virgin solvent consumed by the eleven companies accounted for 75.4 % of organic solvent imports to Ireland. …

Go to article

The Dependence Of The Overall Drying Time And Product Quality Of A Lyophilization Process On The Relative Position Of Vials On A Tray With Tray Sides And Without Tray Sides For Different Heat Input Control Policies, Kian Hui Gan Jan 2004

The Dependence Of The Overall Drying Time And Product Quality Of A Lyophilization Process On The Relative Position Of Vials On A Tray With Tray Sides And Without Tray Sides For Different Heat Input Control Policies, Kian Hui Gan

Masters Theses

"The dynamic behavior of the primary and secondary drying stages of the lyophilization process were studied when (a) single vials located at different positions on the tray were individually being dried, and (b) the vials on the tray are arranged in clusters of square and hexagonal arrays and all the vials on the tray are simultaneously being dried. For both cases (a) and (b), fast drying times and relatively more uniform distributions of temperature and concentration of bound water at the end of the secondary drying stage are obtained by heat input control that runs the lyophilization process close to …

Go to article

Laboratory Automation Education, James D. Sterling Jan 2004

Laboratory Automation Education, James D. Sterling

Business and Information Technology Faculty Research & Creative Works

No abstract provided.

Go to article

Exploration Of Artificial Multiferroic Thin-Film Heterostructures Using Composition Spreads, K.-S. Chang, M. A. Aronova, C.-L. Lin, M. Murakami, M.-H. Yu, Jason R. Hattrick-Simpers, O. O. Famodu, S. Y. Lee, R. Ramesh, M. Wuttig, I. Takeuchi, C. Gao, L. A. Bendersky Jan 2004

Exploration Of Artificial Multiferroic Thin-Film Heterostructures Using Composition Spreads, K.-S. Chang, M. A. Aronova, C.-L. Lin, M. Murakami, M.-H. Yu, Jason R. Hattrick-Simpers, O. O. Famodu, S. Y. Lee, R. Ramesh, M. Wuttig, I. Takeuchi, C. Gao, L. A. Bendersky

Faculty Publications

We have fabricated a series of composition spreads consisting of ferroelectric BaTiO3 and piezomagnetic CoFe2O4 layers of varying thicknesses modulated at nanometer level in order to explore artificial magnetoelectricthin-film heterostructures. Scanning microwavemicroscopy and scanning superconducting quantum interference device microscopy were used to map the dielectric and magnetic properties as a function of continuously changing average composition across the spreads, respectively. Compositions in the middle of the spreads were found to exhibit ferromagnetism while displaying a dielectric constant as high as ≈120.

Go to article

Series Solution To The Transient Convective Diffusion Equation For A Rotating Disk Electrode, Shiriram Santhanagopalan, Ralph E. White Jan 2004

Series Solution To The Transient Convective Diffusion Equation For A Rotating Disk Electrode, Shiriram Santhanagopalan, Ralph E. White

Faculty Publications

A series solution to the transient convective diffusion equation for the rotating disc electrode system is presented and compared to previously reported solutions. The solution presented here is for the entire time domain and agrees well with both the short and long time solutions presented earlier in the literature.

Go to article

Parameter Estimates For A Pemfc Cathode, Qingzhi Guo, Vijay A. Sethuraman, Ralph E. White Jan 2004

Parameter Estimates For A Pemfc Cathode, Qingzhi Guo, Vijay A. Sethuraman, Ralph E. White

Faculty Publications

Five parameters of a model of a polymer electrolyte membrane fuel cell (PEMFC) cathode (the volume fraction of gas pores in the gas diffusion layer, the volume fraction of gas pores in the catalyst layer, the exchange current density of the oxygen reduction reaction, the effective ionic conductivity of the electrolyte, and the ratio of the effective diffusion coefficient of oxygen in a flooded spherical agglomerate particle to the square of that particle radius) were determined by least-squares fitting of experimental polarization curves. The values of parameters obtained in this work indicate that ionic conduction and gas-phase transport are two …

Go to article

Analytical Solution For The Impedance Of A Porous Electrode, Sheba Devan, Venkat R. Subramanian, Ralph E. White Jan 2004

Analytical Solution For The Impedance Of A Porous Electrode, Sheba Devan, Venkat R. Subramanian, Ralph E. White

Faculty Publications

A macrohomogeneous model is presented for a porous electrode that includes coupled potential and concentration gradients with linear kinetics. The equations are solved to obtain an analytical expression for the impedance of a porous electrode. Complex plane plots are presented that illustrate two well-defined arcs: a kinetic arc and a diffusion arc with their time constants far apart. The effects of parameters such as exchange current density, porosity, diffusion coefficient, thickness, and interfacial area on the impedance spectra are presented. The usefulness of the analytical solution in investigating the effect of solution phase diffusion is also presented.

Go to article

A Steady-State Impedance Model For A Pemfc Cathode, Qingzhi Guo, Ralph E. White Jan 2004

A Steady-State Impedance Model For A Pemfc Cathode, Qingzhi Guo, Ralph E. White

Faculty Publications

A model for the simulation of the steady-state impedance response of a polymer electrolyte membrane fuel cell (PEMFC) cathode is presented. The catalyst layer of the electrode is assumed to consist of many flooded spherical agglomerate particles surrounded by a small volume fraction of gas pores. Stefan-Maxwell equations are used to describe the multicomponent gas-phase transport occurring in both the gas diffusion layer and the catalyst layer of the electrode. Liquid-phase diffusion of O2 is assumed to take place in the flooded agglomerate particles. Newman’s porous electrode theory is applied to determine over-potential distributions. © 2004 The Electrochemical Society. All …

Go to article

Cycle Life Modeling Of Lithium-Ion Batteries, Gang Ning, Branko N. Popov Jan 2004

Cycle Life Modeling Of Lithium-Ion Batteries, Gang Ning, Branko N. Popov

Faculty Publications

A first-principles-based charge-discharge model was developed to simulate the capacity fade of Li-ion batteries. The model is based on the loss of active lithium ions due to solvent reduction reaction and on the rise of the anode film resistance. The effect of parameters such as exchange current density, depth of discharge (DOD), end of charge voltage, film resistance, and the overvoltage of parasitic reaction were studied quantitatively. The model controls the required DOD by controlling the discharge time and estimates the end of discharge voltages as a function of cycle number.

Go to article

Development Of First Principles Capacity Fade Model For Li-Ion Cells, P. Ramadass, Bala Haran, Parthasarathy M. Gomadam, Ralph E. White, Branko N. Popov Jan 2004

Development Of First Principles Capacity Fade Model For Li-Ion Cells, P. Ramadass, Bala Haran, Parthasarathy M. Gomadam, Ralph E. White, Branko N. Popov

Faculty Publications

A first principles-based model has been developed to simulate the capacity fade of Li-ion batteries. Incorporation of a continuous occurrence of the solvent reduction reaction during constant current and constant voltage (CC-CV) charging explains the capacity fade of the battery. The effect of parameters such as end of charge voltage and depth of discharge, the film resistance, the exchange current density, and the over voltage of the parasitic reaction on the capacity fade and battery performance were studied qualitatively. The parameters that were updated for every cycle as a result of the side reaction were state-of-charge of the electrode materials …

Go to article

Development Of Novel Method For Preparation Of Pemfc Electrodes, Hansung Kim, Branko N. Popov Jan 2004

Development Of Novel Method For Preparation Of Pemfc Electrodes, Hansung Kim, Branko N. Popov

Faculty Publications

A method based on pulse electrodeposition technique was developed for preparation of membrane electrode assemblies (MEAs). In this approach, platinum is deposited directly on the surface of the carbon electrode. The method ensures most of the platinum to be in close contact with the membrane. Using this method it is possible to increase the Pt/C ratio up to 75 wt % near the surface of the electrode resulting in a 5 µm thick catalyst layer. The MEA prepared by pulse electrodeposition exhibits a current density of 0.33 A/cm2 at 0.8 V with platinum loading of 0.25 mg of Pt/cm …

Go to article

Solvent Diffusion Model For Aging Of Lithium-Ion Battery Cells, Harry J. Ploehn, Premanand Ramadass, Ralph E. White Jan 2004

Solvent Diffusion Model For Aging Of Lithium-Ion Battery Cells, Harry J. Ploehn, Premanand Ramadass, Ralph E. White

Faculty Publications

This work presents a rigorous continuum mechanics model of solvent diffusion describing the growth of solid-electrolyte interfaces (SEIs) in Li-ion cells incorporating carbon anodes. The model assumes that a reactive solvent component diffuses through the SEI and undergoes two-electron reduction at the carbon-SEI interface. Solvent reduction produces an insoluble product, resulting in increasing SEI thickness. The model predicts that the SEI thickness increases linearly with the square root of time. Experimental data from the literature for capacity loss in two types of prototype Li-ion cells validates the solvent diffusion model. We use the model to estimate SEI thickness and extract …

Go to article

Fundamental Chemistry Of U And Pu In The Tbp-Dodecane-Nitric Acid System: Quaterly Report, Kenneth Czerwinski, Byron Bennett Jan 2004

Fundamental Chemistry Of U And Pu In The Tbp-Dodecane-Nitric Acid System: Quaterly Report, Kenneth Czerwinski, Byron Bennett

Separations Campaign (TRP)

The speciation of hexavalent U and tetravalent Pu will be examined in the TBP-dodecane- nitric acid systems. This topic is chosen based on data needs for separation modeling identified by the AFCI. Emphasis will be placed on studying the influence of nitrate and acetohydroxamic acid on U and Pu speciation as well as conditions where a third phase forms in the organic phase. The organic phase will be 30 % TBP in dodecane. Equal volumes of aqueous and organic phase will be used. The speciation of the actinides in the aqueous and organic phase will be determined by a number …

Go to article

Metal-Doped Rare Earth Oxide Catalysts For Condensations To Ketones, Arvind Karkal Bhat Jan 2004

Metal-Doped Rare Earth Oxide Catalysts For Condensations To Ketones, Arvind Karkal Bhat

LSU Master's Theses

Metal-doped supported rare earth oxide catalysts were examined to determine their suitability for the decarboxylative condensation of two carboxylic acids to produce ketones. The catalysts were characterized based on chemisorption tests, coke analysis using thermo-gravimetric analysis and X-ray absorption spectroscopy. Effect of catalyst particle size on rate of reaction was studied for various supported cerium oxide catalysts. Catalysts were tested for activity, selectivity, and stability using isothermal fixed bed reactors. Optimal operating conditions for the production of diisopropyl ketone and methyl nonyl ketone were determined. It was found that supported cerium oxide catalysts effectively catalyzed the condensation of isobutyric acid …

Go to article

Modeling The Direct Solar Conversion Of Co2 To Co And O2, Thomas H. Fletcher Jan 2004

Modeling The Direct Solar Conversion Of Co2 To Co And O2, Thomas H. Fletcher

Faculty Publications

At high temperatures (greater than 2300 K), CO2 is known to dissociate to CO and O. A prototype solar collector was previously demonstrated to achieve such high temperatures, achieving 4-6 mol % CO in the product stream from an inlet stream of pure CO2. This paper describes the results of computer modeling performed to determine the flow, temperature, and reactions occurring in the prototype device. Of particular interest are the heat-transfer and reaction mechanisms involved and how much photolysis occurs in the prototype. Predictions were performed with two different computational fluid dynamic codes (Fluent and PCGC-3). The …

Go to article

Ignition Behavior Of Live California Chaparral Leaves, Joshua D. Engstrom, Jared K. Butler, Steven G. Smith, Larry L. Baxter, Thomas H. Fletcher, David R. Weise Jan 2004

Ignition Behavior Of Live California Chaparral Leaves, Joshua D. Engstrom, Jared K. Butler, Steven G. Smith, Larry L. Baxter, Thomas H. Fletcher, David R. Weise

Faculty Publications

Current forest fire models are largely empirical correlations based on data from beds of dead vegetation. Improvement in model capabilities is sought by developing models of the combustion of live fuels. A facility was developed to determine the combustion behavior of small samples of live fuels, consisting of a flat-flame burner on a moveable platform. Qualitative and quantitative combustion data are presented for representative samples of California chaparral: manzanita (Arctostaphylos parryana); oak (Quercus berberidifolia); ceanothus (Ceanothus crassifolius), and chamise (Adenostoma fasciculatum). Times to ignition were significantly influenced by shape effects, whereas ignition temperature was more dependent on chemical composition

Go to article

Surface Titration Of Colloidal Alpha-Alumina, J. W. Ntalikwa Dec 2003

Surface Titration Of Colloidal Alpha-Alumina, J. W. Ntalikwa

Tanzania Journal of Engineering and Technology (TJET)

The surface charge density (σ₀) of colloidal alumina (α-Al₂O₃) suspended in 1:1 electrolytes (NaCl, NaNO₃, CsCl and CsNO₃) at different electrolyte concentration (c₀) was determined using acid-base titration. The data were described in terms of the Triple Layer Model (TLM) of electric double layer. It was observed that the polarity of σ₀ could be varied through a point of zero charge (PZC) by varying the pH of the suspension. The PZCs were observed to occur at pH = 7.8 ± 0.1, 7.6 ± 0.2, 8.5 ± 0.1 and 8.3 ± 0.1 in NaCl, NaNO₃, CsCl and CsNO₃, respectively. It was …

Go to article

Piezoresistive Properties Of Ito Strain Sensors Prepared With Controlled Nanoporosity, Otto J. Gregory, Tao You Dec 2003

Piezoresistive Properties Of Ito Strain Sensors Prepared With Controlled Nanoporosity, Otto J. Gregory, Tao You

Chemical, Biomolecular, and Materials Engineering Faculty Publications

A ceramic strain gage based on reactively sputtered indium-tinoxide (ITO) thin films is being developed to monitor the structural integrity of components employed in aerospace propulsion systems operating at temperatures in excess of 1500°C. The hightemperature stability and piezoresistive properties depend to a large extent on the thickness of the active ITO strain elements comprising these ceramic strain gages. Scanning electron microscopy of the thick ITO sensors revealed a partially sintered microstructure consisting of a contiguous network of submicrometer ITO particles with well-defined necks and isolated nanoporosity. It appeared that densification of the ITO particles was retarded during high-temperature exposure …

Go to article

Centrifugal Extraction Of Avocado Oil From The Pulp, J. W. Ntalikwa Dec 2003

Centrifugal Extraction Of Avocado Oil From The Pulp, J. W. Ntalikwa

Tanzania Journal of Engineering and Technology (TJET)

Absract

Go to article

The Inclusion Behaviothe Inclusion Behavior Of Sodium Compounds In Sub-Micron Particles Formed During Coal Combustionr Of Sodium Compounds In Sub-Micron Particles Formed During Coal Combustion, Iddi Mkilaha Dec 2003

The Inclusion Behaviothe Inclusion Behavior Of Sodium Compounds In Sub-Micron Particles Formed During Coal Combustionr Of Sodium Compounds In Sub-Micron Particles Formed During Coal Combustion, Iddi Mkilaha

Tanzania Journal of Engineering and Technology (TJET)

During combustion of coal, biomass and sewage sludge, metallic compounds especially alkali metals such as sodium and potassium vaporize and form fumes which are emitted with the exhaust gases. These fumes are corrosive to the turbine blades of power plants. To minimize corrosion, efforts have been made to control the condensation phase of these metals. In this study, the evolution and inclusion of sodium in sub-micron particles was investigated using a drop tube furnace and a low-pressure impactor (LPI). Four types of coal with different chemical properties were tested. The results suggest that a reaction-controlled mechanism and nucleation via chemical …

Go to article

Simulation Of The Communication Process In A Pin Mill, Ambrose J. M. Itika Dec 2003

Simulation Of The Communication Process In A Pin Mill, Ambrose J. M. Itika

Tanzania Journal of Engineering and Technology (TJET)

Prediction of the performance of comminution equipment by mathematical models and simulation poses a great challenge to the chemical engineer. This paper describes the simulation of grinding results obtained using an impact mill. Single particle results have been used to generate breakage and selection coefficients that were used for the evaluation of the model. Results have shown that simulation model is in good agreement with the experimental data obtained at a circumferential speed above 60 m/s. At lower speeds, the models shows only partial agreement in the middle particle size ranges. The application of the model is therefore limited for …

Go to article

On The Generalized Borel Transform And Its Application To The Statistical Mechanics Of Macromolecules, Marcelo Marucho, Gustavo A. Carri Dec 2003

On The Generalized Borel Transform And Its Application To The Statistical Mechanics Of Macromolecules, Marcelo Marucho, Gustavo A. Carri

College of Polymer Science and Polymer Engineering

We present a new integral transform called the generalized Borel transform (GBT) and show how to use it to compute distribution functions used to describe the statistical mechanics of macromolecules. For this purpose, we choose the random flight model (RFM) of macromolecules and show that the application of the GBT to this model leads to the exact expression of the polymer propagator (two-point correlation function) from which all the statistical properties of the model can be obtained. We also discuss the mathematical simplicity of the GBT and its applicability to macromolecules with other topologies. (C) 2003 American Institute of Physics.

Go to article

Method For Forming An Antenna And A Radio Frequency Transponder, Ravi F. Saraf Dec 2003

Method For Forming An Antenna And A Radio Frequency Transponder, Ravi F. Saraf

Department of Chemical and Biomolecular Engineering: Patents

A method is disclosed for forming an antenna and a radio frequency transponder. The method comprises the steps of (1) forming a paste comprising metal powder, polymeric material, and solvent; and (2) screening the paste through a screen onto a substrate. Additional steps couple electrical components to the paste and dry the paste.

Go to article

First Prev Next Last