Engineering Commons^™

Transmission Electron Microscopy Characterization Of High-Temperatur Oxidation Of Fe-20cr-5al Alloy Prepared By Focused Ion Beam Technique, Mohammad Dani, Pudji Untoro, Teguh Yulius Surya Panca Putra, Parikin Parikin, Joachim Mayer, Arbi Dimyati

Makara Journal of Technology

The Focused Ion Beam (FIB) technique was applied for cross section preparation of the oxidized alloy for Transmission Electron Microscopy (TEM) study. Prior to preparation, the specimens of Fe-20Cr-5Al alloy sheet were oxidized in air at 1200 oC for 2 minutes, 10 minutes, 2 hours, and 100 hours. The microstructure and elemental composition of the samples were characterized using TEM equipped with an Energy Dispersive X-Ray Spectroscopy (EDX). The Electron Energy Loss Spectroscopy (EELS) was used to determine of the light elements. The TEM investigation reveals remarkable microstructure evolution of the specimens during oxidation which generally exhibit a typical multi-layer …

Multiplexed Microfluidic Loop-Mediated Isothermal Amplification Of The 16s Rrna Gene For The Diagnosis Of Neonatal Sepsis In Resource-Limited Environments, Griffin Thomas Sonaty

Biomedical Engineering Undergraduate Honors Theses

Bacterial infection, or sepsis, places a disproportionately high burden on newborns in developing countries. This is due in part to a lack of diagnostic tools suitable for sustainable use in resource-limited nurseries. One potential vehicle for a new diagnostic assay is loop-mediated isothermal amplification (LAMP), a high-yield DNA amplification method. LAMP has been used to detect single genes from bacteria in blood serum samples to aid in sepsis diagnosis. While specific, this approach can only provide detection for one species at a time. LAMP could be adapted to detect a broader set of bacteria, while retaining a degree of specificity …

Effect Of Sodium Acetate On Butanol Production By Clostridium Saccharoperbutylacetonicum Via Abe Fermentation, Brigetta Super

Chemical Engineering Undergraduate Honors Theses

Clostridium saccharoperbutylacetonicum is used in ABE fermentation which historically produces a solvent mixture of 3:6:1 parts acetone, butanol, and ethanol respectively. The fermentation process undergoes two phases, an acidogenesis phase which produces butyric acid, and a solventogenic phase which reutilizes the butyric acid, making butanol. For ABE fermentation to compete economically with butanol production from petroleum, the concentration of butanol in the solvent product must be increased dramatically. Unpublished research by Carver student Kayla Kimbrough in the summer of 2012 showed that the addition of salts (sodium acetate) to PYG fermentation media increased butanol production from Clostridium saccharoperbutylacetonicum significantly. When …

Electrocoagulation For Sulfate Removal, Michael A. Layton

Chemical Engineering Undergraduate Honors Theses

In the United States, one of the major rising issues is water shortage, especially in Western, inland states with arid climates. Not only do deficiencies exist for potable water, but for irrigation and agricultural purposes as well. Currently, the Brackish Groundwater National Desalination Research Facility in Alamogordo, New Mexico has four separate wells that are being used for experimentation. A major concern is that a considerable amount of this water is currently wasted by being sent to evaporation ponds without any sort of treatment for human consumption. The WERC-A-HOLICS have identified two possible methods to alleviate this problem. Electrocoagulation (EC) …

Electrocoagulation For Sulfate Removal, Hailey Marie Dunsworth

Chemical Engineering Undergraduate Honors Theses

In the United States, one of the major rising issues is water shortage, especially in Western, inland states with arid climates. Not only do deficiencies exist for potable water, but for irrigation and agricultural purposes as well. Currently, the Brackish Groundwater National Desalination Research Facility in Alamogordo, New Mexico has four separate wells that are being used for experimentation. A major concern is that a considerable amount of this water can be used as another reliable source for potable water if treated. The WERC-A-HOLICS have identified two possible methods to alleviate this problem. Electrocoagulation (EC) is a technology useful for …

Electrocoagulation For Sulfate Removal, Gina Marie Densmore

Chemical Engineering Undergraduate Honors Theses

In the United States, one of the major rising issues is water shortage, especially in Western, inland states with arid climates. Not only do deficiencies exist for potable water, but for irrigation and agricultural purposes as well. Currently, the Brackish Groundwater National Desalination Research Facility in Alamogordo, New Mexico has four separate wells that are being used for experimentation. A major concern is that a considerable amount of this water is currently wasted by being sent to evaporation ponds without any sort of treatment for human consumption. The WERC-A-HOLICS have identified two possible methods to alleviate this problem. Electrocoagulation (EC) …

Novel Separation Methods Using Electrodialysis/Electrodeionization For Product Recovery And Power Generation, Alexander Miguel Lopez-Rosa

Graduate Theses and Dissertations

The use of electrodialytic separations for the purification of products has been a vital technique for the past 50 years in the chemical industry. Originally used for demineralization and desalination, electrodialysis and its counterparts have expanded to assist in product purification, waste and hazard removal, and power generation. This research focused on the development of high purity organic acids purification with low power requirements. Work resulted in the development of a new type of electrodialysis process, specifically the use of ionic liquids as a secondary solvent for the development of dual solvent electrodialysis. Through dual solvent electrodialysis, ions were recovered …

Nonlinear Estimation And Control With Application To Upstream Processes, Reza Asgharzadeh Shishavan

Theses and Dissertations

Subsea development and production of hydrocarbons is challenging due to remote andharsh conditions. Recent technology development with high speed communication to subsea anddownhole equipment has created a new opportunity to both monitor and control abnormal or undesirableevents with a proactive and preventative approach rather than a reactive approach. Twospecific technology developments are high speed, long-distance fiber optic sensing for productionand completion systems and wired pipe for drilling communications. Both of these communicationsystems offer unprecedented high speed and accurate sensing of equipment and processes that aresusceptible to uncontrolled well situations, leaks, issues with flow assurance, structural integrity,and platform stability, as well …

Sustainable Disposal Of Coal Processing Waste Streams, Mohammad Rezaee

Theses and Dissertations--Mining Engineering

Modern coal preparation facilities incorporate a wide array of solid-solid and solid-liquid separation processes for rejecting mineral matter to meet market specifications. The coarse mineral matter is typically placed into engineered refuse piles whereas the fine refuse is either stored in impoundments or co-disposed with the coarse refuse. The discharge water from the refuse material represents an environmental concern due to the potential release of trace elements, and the subsequent elevation of total dissolved solids and conductivity. The research findings reported in this dissertation addresses sustainable coal processing waste disposal through using strategies aimed at minimizing the environmental impacts. To …

Pilot Scale Demonstration And Evaluation Of Innovative Non-Deslimed Non-Classified Gravity-Fed Hm Cyclone, Yumo Zhang

Theses and Dissertations--Mining Engineering

Coal preparation plants are required in some cases to produce a high-grade product using a low specific gravity cut-point. For these situations, a second higher gravity separation would be desirable to generate a mid-grade product that can be utilized for electricity generation thereby maximizing coal recovery. A study was conducted to evaluate the potential of achieving efficient separations at two different density cut-points in a single stage using a three-product dense medium cyclone. Variations in density cut-point and process efficiency values were quantified as a function of the feed medium density, feed medium-to-coal ratio, and feed pressure using a three-level …

Exploration Of Cannabinoid And Opioid Agents From Plants Used In Traditional Medicine, John Fitzpatrick

Honors Theses

Ten plants, with known medicinal uses, were gathered to study for their possible production of secondary metabolites that act as opioid and cannabinoid agents. All plants were subjected to in vitro bioassays testing for their affinity for the opioid and cannabinoid receptors. Banisteriopsis caapi extracts displayed the greatest affinity for both opioid and cannabinoid receptors. B. caapi extracts underwent column fractionation yielding fractions that were subjected to further in vitro studies. We discovered that the ethanolic extract of this plant (foliage) binds to all three opioid receptors (µ, κ and δ) and cannabinoid receptors (CB1 and CB2) with values ranging …

Modelling Of Channelization In Unconsolidated Formations Due To Liquid Injection, Juan Felipe Bautista Barake

LSU Master's Theses

Fluid injection has been increasingly implemented in oil and gas producing fields to optimize hydrocarbon production in both young and mature oil fields across the globe. This situation arises from the realization that early planning of second and tertiary recovery methods may improve project economics significantly. Injectors are then intended to perform at high injection rates with low bottomhole flowing pressures for as long as possible. In the case of injectors drilled in unconsolidated formations, deficient performance often times seems to be the norm. With a majority of these fields being offshore developments in which capital expenditures are high, a …

Preparation Of Active, Stable Supported Iron Catalysts And Deactivation By Carbon Of Cobalt Catalysts For Fischer-Tropsch Synthesis, Kamyar Keyvanloo

Theses and Dissertations

The first half of this dissertation reports the development of supported Fe FT catalysts including the effects of various, carefully chosen preparation methods on the performance of alumina-supported iron/copper/potassium (FeCuK/Al2O3); it was determined that non-aqueous slurry impregnation and co-impregnation yielded catalysts with activities as high as any reported in the literature. Furthermore, the effects of support properties including pore size, hydroxyl group concentration, and support stabilizer were investigated for FeCuK/Al2O3 catalysts containing 20 or 40% Fe. For the first time, we report the performance of a supported Fe FT catalyst that is not only more active and stable than any …

A Novel Silica-Based Nano Pigment As A Titanium Dioxide Replacement, Ryan Stoneburner

Masters Theses

This research focused on the evaluation of a new Silica-based pigment for the replacement of titanium dioxide (TiO₂) in paperboard coatings. The silica-based pigment has shown the ability to be a replacement in terms of functionality and runnability. TiO₂ is currently the highest opacifying pigment used in paper coatings, but it is also the most costly. Finding a less expensive pigment that doesn't reduce effectiveness is critical to reducing the cost of TiO₂ formulations. To evaluate the new pigment, coatings will be applied using a Cylindrical Laboratory Coater (CLC) with varying amounts of TiO₂ and …

New Advances In Post-Installed Subsea Monitoring Systems For Structural And Flow Assurance Evaluation, Reza Asgharzadeh Shishavan, David Brower, John Hedengren, Alexis Brower

Faculty Publications

An overview of fiber optic sensors for temperature, pressure, strain, and fatigue of subsea structures is provided. Current progress details efforts to ensure proper installation and bonding to existing risers, flow-lines, mooring lines, trees, and other structures in actual subsea environments. Developments include clamp prototypes, bonding techniques, long-term fatigue analysis, sensor calibration, and temperature compensation. Fiber optic technology in subsea monitoring began over 20 years ago by migrating expertise from decommissioning of rocket motors. The first installations were on new installations of subsea pipelines, production risers, and drilling risers to measure strain and vibration for fatigue life monitoring. Of particular …

Preparation And Characterization Of Pc And San Composites And Pc/San Blends With Graphene Nanofiller, Marc Olivier-Blais

Senior Theses

For my thesis defense I plan to focus on both the scientific merit of my research and a reflection of what I personally gained from my experience in Germany. The central goal of this scientific study was to prepare a polymer blend with fine co-continuous blend morphology which contains well dispersed graphene nanofiller. Graphene is currently of great interest as a filler within the polymer nanocomposite community due to its excellent electrical conductivity, favorable mechanical properties, and high surface area. The polycarbonate (PC)/ Poly (styrene acrylonitrile) (SAN) blend system is of interest due to their ubiquitous use in both industrial …

Coal Fires: An Environmental Disaster, Edward K. Jenner

Chemical Engineering Undergraduate Honors Theses

Coal Fires are an environmental disaster.

Water System For Developing Countries / Disaster Relief Made With Local Materials, Dong Joon Lee

Chemical Engineering Undergraduate Honors Theses

As the equipment builder of the team, I was responsible for building the treadle pump, the sand filter tank, the hand pump, and generating the instructions for each equipment. Each team member was responsible for certain parts of the water purification system, but everyone worked cohesively on all parts of the design when assistance was necessary. The original design for the treadle pump was a two-man powered pump which discharged water at 15 gallons per minute. Since our system only required less than half of the flow rate, and required another person to operate the bicycle, the pump was redesigned …

Model Systems For The Study Of Active Phase Evolution In Complex Bimetallic Catalysts (Pdzn), Jonathan Paiz

Chemical and Biological Engineering ETDs

This study used PdZn as a model system to investigate phase transformations and its influence on reactivity. Aerosol synthesis was used to study the oxide precursors of the PdZn system, spin coating was used to synthesize model PdZn nanoparticles for phase transformations studies and preliminary work with CO oxidation coupled with methanol steam reforming (MSR) was used to gain insight into in-situ surface reactivity of PdZn for MSR. Multiple characterization techniques including XRD, Raman Spectroscopy, XPS, EDX along with TEM and STEM were used to gain valuable insight into the nature of the samples used in these studies. Investigations into …

A Stable Coating For Silica Supported Fisher-Tropsch Catalysts, Nathan M. Cluff, Dr. Calvin Batholomew

Journal of Undergraduate Research

Our daily lives are dependent upon petroleum. This is evident in the fact that 26.4% of the United States’ energy consumption is used directly for transportation in the form of liquid fuels.1 To prevent shortages in gasoline, jet fuel, home heating oil, and other petroleum products, alternatives will be needed to supplement the rising world demand. As a citizen that will raise a family during a time when alternative energy sources will need to be implemented, I have a keen interest in how we will meet our energy needs and where we will get those resources. One alternative is the …

Biofuels Production Via Catalytic Hydrocracking Of Ddgs Corn Oil And Hydrothermal Decarboxylation Of Oleic Acid Over Transition Metal Carbides Supported On Al-Sba-15, Basem A. Al Alwan

Wayne State University Dissertations

The purpose of this research is to minimize the gap between the production of biofuels and the production of petroleum-based fuels by developing catalysts that can utilize renewable non-food based feedstocks (waste vegetable oils, algal oil, brown grease, etc.) and have great performance under low operation conditions. In particular, green diesel has become an attractive biofuel due to its superior properties that are quite similar to petroleum diesel. Therefore, no modifications are required to existing infrastructures. Three distinct experimental phases have been identified in order to achieve the objective of this work as follow:

First, the hydrocracking of distillers dried …

Effects Of Different Preparation Methods On Structure And Catalytic Behavior Of Iron-Based Catalyst Via Fischer Trospch Synthesis Of Biomass-Derived Syngas, Khietlethanh Mai

LSU Master's Theses

Lignocellulosic biomass is a promising feedstock for producing liquid fuels via synthetic gas (syngas) and Fischer Tropsch Synthesis (FTS). Syngas produced from biomass has low H2/CO ratio (~0.7/1) and high concentration of CO2. In order to produce liquid hydrocarbons from this syngas, a catalyst must be used to increase the H2/CO ratio to 2 or higher. This catalyst must also have reasonable reverse water-gas-shift (R-WGS) activity in a CO2 rich environment. In this study, two 100Fe/4Cu/4K/6Zn were prepared using coprecipitation (Cat_C) and impregnation (Cat_I) methods. The effects of these preparation methods on the catalyst structure and FTS performance in biomass …

Studies Of Influencing Factors For Shale Gas Reservoir Performance, Jiaqi Wang

Masters Theses

"Shale gas resource plays a significant role in energy supply worldwide. For economic production of shale gas, technologies of horizontal well and hydraulic fracturing are used for shale gas reservoirs. Therefore, the productivity of the shale gas reservoirs will be influenced by both reservoir condition, and hydraulic fracture properties.

In this thesis, parameters that will influence shale gas production were classified into two categories: reservoir properties and hydraulic fracture properties. Published shale gas simulation studies were surveyed for determining the typical ranges of those properties. CMG-GEM was employed to finish the reservoir simulation work, and CMG-CMOST was used to complete …

A Post-Installed Subsea Monitoring System For Structural And Flow Assurance Evaluation, David Brower, Alexis Brower, John Hedengren, Reza Asgharzadeh Shishavan

Faculty Publications

This paper describes major advancements for deploying sensing systems on existing subsea structures as part of the Clear Gulf study. In the past, a major shortcoming of post-installed monitoring systems has been poor coupling between the sensor and structure; this study provided methods to overcome this problem. Both subsea field testing and laboratory testing were performed to verify these advancements. The Clear Gulf study is a collaboration between the offshore energy industry and NASA with the goals of risk mitigation, safety, efficiency and environmental concerns in the offshore energy industry. The study is ongoing and has investigated new methods to …

Hydrothermal Stability Of The Davisil/Cab-O-Sil Silica Catalyst Carriers, Clint G. Guymon, Dr. Calvin H. Bartholomew

Journal of Undergraduate Research

The Fischer-Tropsch Synthesis (FTS) sustained Germany’s fuel needs during World War II as well as South Africa’s since the 1960’s.1 This catalytic technology is enthralling and left to the interested reader to reap in the deluge of information present in the literature. The principle reaction in FTS is a simple polymerization: nCO + 2nH2 ­ [-CH2-]n + nH2O, over a metal such as iron or cobalt. This paper focuses on the problem of hydrothermal stability of silicasupported cobalt FTS catalyst.

Improved Deinkability Of Lep (Liquid Electrophotography) Digital Prints, Zheng Wei

Masters Theses

Digital printing plays a very important role in the life of modern society. With the development of digital printing technologies, and the increasing market share of digital printing, the amount of digital prints in waste paper is rapidly increasing. Under “green” manufacturing and environmental sustainability, deinking of digital print inks is an urgent problem that needs to be solved. Indigo is a typical series of HP (Hewlett-Packard) digital presses that use a liquid ink named ElectroInk (Liquid Electrophotography or LEP). The particle size of HP ElectroInk is very small, 1-2 microns, which is smaller than dry toners. But, during flotation, …

New Approaches On Deinking Evaluations, Roland Gong

Dissertations

Paper recycling in the U.S. is the most successful program of environmental sustainability. Approximately two thirds of consumed paper products were recycled, according to the EPA and AF&PA. However, domestic mills only applied one third of recycled fibers into new products, which is much lower than reported in China (67%). The domestic recycle mills claimed that outdated facilities, poor recycled fiber quality and high manufacturing cost are the major issues. They also said that these recycle mills have been put in a “no-win” position, which threatens the whole recycling loop eventually. A case study about Chinese recycle mills has been …

An Industrial Demonstration Of Biorefinery Of Lipids:Coproduction Of Biodiesel And 1,3-Propandiol, Dehua Liu

BioEnergy IV: Innovations in Biomass Conversion for Heat, Power, Fuels and Chemicals

No abstract provided.

Sustainability Issues Regarding Bamboo As A Renewable Feedstock For Fuels And Materials, Claudia Daza

BioEnergy IV: Innovations in Biomass Conversion for Heat, Power, Fuels and Chemicals

No abstract provided.

Advanced Deepwater Monitoring System, David Brower, John Hedengren, Reza Asgharzadeh Shishavan, Alexis Brower

Faculty Publications

This study investigates new methods to improve deepwater monitoring and addresses installation of advanced sensors on ”already deployed” risers, flowlines, trees, and other deepwater devices. A major shortcoming of post installed monitoring systems in subsea is poor coupling between the sensor and structure. This study provided methods to overcome this problem. Both field testing in subsea environments and laboratory testing were performed. Test articles included actual flowline pipe and steel catenary risers up to twenty-four inches in diameter. A monitoring device resulting from this study can be installed in-situ on underwater structures and could enhance productivity and improve safety of …