Engineering Commons^™

Test 2023: John Deere 7260r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2020: Case Ih Magnum 315, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2019: Case Ih Magnum 290, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2028: John Deere 6230 T3, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2038: John Deere 5115m, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2020a: New Holland T8.360, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2051: New Holland Ts6.125, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2050: New Holland Ts6.140, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Design And Production Aspects Of An Electroluminescent Segment Display, Veronica Kopp, Chris Nixon

Graphic Communication

The purpose of this study was to get a better understanding of the different ways printed circuits could be constructed and then implemented into creative, visual designs for printed electroluminescent displays. A variety of circuit design variables, such as area and length, were tested that will help create solutions for printed electronics.

This study tested different variables of circuit design, such as length of silver traces and the size of the image area, to help optimize ways to build a printed circuit. Then, findings were implemented into a segmented graphic display in order to analyze innovative ways to utilize multiple …

Capturing Motion, Allison Marsh

Section 3: Imaging the Fast Moving

No abstract provided.

Design Of A Reversible Alu Based On Novel Reversible Logic Structures, Matthew Arthur Morrison

USF Tampa Graduate Theses and Dissertations

Programmable reversible logic is emerging as a prospective logic design style for implementation in modern nanotechnology and quantum computing with minimal impact on circuit heat generation. Recent advances in reversible logic using and quantum computer algorithms allow for improved computer architecture and arithmetic logic unit designs. In this paper, a 2*2 Swap gate which is a reduced implementation in terms of quantum cost and delay to the previous Swap gate is presented. Next, a novel 3*3 programmable UPG gate capable of calculating the fundamental logic calculations is presented and verified, and its advantages over the Toffoli and Peres gates are …

Nebraska Summary: S856 New Holland T6 140, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2049: Case Ih Steiger 600 Quadtrac, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Research Methodologies: A Look At The Underlying Philosophical Foundations Of Research, Nathapon Siangchokyoo, Andres Sousa-Poza

Engineering Management & Systems Engineering Faculty Publications

Quantitative and qualitative research methodologies have had their greatest share of debates dating back to the 1970s. Researchers have long argued over the underlying philosophical features between the two methodologies and their ability to derive knowledge (Onwuegbuzie & Leech, 2005, Sale, Lohfeld, & Brazil, 2002; Powell, Mihalas, Onwuegbuzie, Suldo and Daley, 2008; Sechrest and Sidani, 1995). More recently, modern researchers have argued that the integration of quantitative and qualitative methods into a single methodology (known simply as mixed methods research) allows researchers to answer questions otherwise unobtainable (Carey, 1993). The emergence of mixed methods research has gained increasing popularities in …

Multistable Shape-Shifting Surfaces (Mssss), Paul Joseph Montalbano

USF Tampa Graduate Theses and Dissertations

This paper presents designs for Multistable Shape-Shifting Surfaces (MSSS) by introducing bistability into the Shape-Shifting Surface (SSS). SSSs are defined as surfaces that retain their effectiveness as a physical barrier while undergoing changes in shape. The addition of bistability to the SSS gives the surface multiple distinct positions in which it remains when shifted to, i.e. by designing bistability into a single SSS link, the SSS unit cell can change into multiple shapes, and stabilize within the resulting shape, while maintaining integrity against various forms of external assaults normal to its surface. Planar stable configurations of the unit cell include, …

Encapsulation Of High Temperature Phase Change Materials For Thermal Energy Storage, Rupa Nath

USF Tampa Graduate Theses and Dissertations

Thermal energy storage is a major contributor to bridge the gap between energy demand (consumption) and energy production (supply) by concentrating solar power. The utilization of high latent heat storage capability of phase change materials is one of the keys to an efficient way to store thermal energy. However, some of the limitations of the existing technology are the high volumetric expansion and low thermal conductivity of phase change materials (PCMs), low energy density, low operation temperatures and high cost. The present work deals with encapsulated PCM system, which operates at temperatures above 500°C and takes advantage of the heat …

Volume-Phase Transitions In Responsive Photo-Cross-Linked Polymer Network Films, Leena Patra

USF Tampa Graduate Theses and Dissertations

The overall thrust of this project is to gain an insight into a class of surface-tethered cross-linked thin films of poly(N-alkylacrylamides) that display a lower critical solution temperature (LCST).The structure of the alkyl group and the modification of the amide groups determine the LCST and resultant volume-phase transition behavior. The aim of this study involves synthesis and characterization of thin films and to correlate the volume-transition behavior to the structure of the alkyl group. For better understanding the volume-transition behavior, the polymer films are perturbed by the Hofmeister salt series to examine trends between different alkyl groups. While most of …

Field And Laboratory Comparison Of The Hydraulic Performance Of Two Ceramic Pot Water Filters, Duncan Peabody

USF Tampa Graduate Theses and Dissertations

Currently 884 million people worldwide are living without access to an improved source of drinking water (WHO/UNICEF, 2011). Piped-water on premises is the ultimate goal of World Health Organization (WHO) due to the ability to treat all of the water and distribute it safely in pressurized pipes. However, Household Water Treatment and Safe Storage (HWTS) is an option for improving the quality of drinking water where that infrastructure is not yet developed, especially where there is a risk of recontamination between point of collection and point of use (Clasen, 2006).

This study analyzed one such HWTS, the ceramic pot water …

Estimation Of The Impact Of Single Airport And Multi-Airport System Delay On The National Airspace System Using Multivariate Simultaneous Models, Nagesh Nayak

USF Tampa Graduate Theses and Dissertations

Airline delays lead to a tremendous loss of time and resources and cost billions of dollars every year in the United States (U.S.). At certain times, individual airports become bottlenecks within the National Airspace System (NAS). To explore solutions for reducing the delay, it is essential to understand factors causing flight delay and its impact on airports in the NAS. Major causal factors of flight delay at airports include over-scheduling, en-route convective weather, reduced ceiling and visibility around airports, and upstream delay propagation. Delay at one airport can be passed on to other airports in the NAS, in another word, …

Cell Adhesion And Migration On Ndga Cross-Linked Fibrillar Collagen Matrices For Tendon Tissue Engineering, Ana Ysabel Rioja

USF Tampa Graduate Theses and Dissertations

Tendons, essential tissues that connect muscles to bones, are susceptible to rupture/degeneration due to their continuous use for enabling movement. Often surgical intervention is required to repair the tendon; relieving the pain and fixing the limited mobility that occurs from the damage. Unfortunately, post-surgery immobilization techniques required to restore tendon properties frequently lead to scar formation and reduced tendon range of motion. Our ultimate goal is to create an optimal tendon prosthetic that can stabilize the damaged muscle-bone connection and then be remodeled by resident cells from the surrounding tissues over time to ensure long-term function. To achieve this, we …

Macroencapsulation Of Phase Change Materials For Thermal Energy Storage, Swetha Pendyala

USF Tampa Graduate Theses and Dissertations

The use of a latent heat storage system using phase change materials (PCMs) is an effective way of storing thermal energy. Latent heat storage enables high-energy storage density which reduces the footprint of the system and the cost. However, PCMs have very low thermal conductivities making them unsuitable for large-scale use without enhancing the effective thermal conductivity. In order to address, the low thermal conductivity of the PCMs, macroencapsulation of PCMs has been adopted as an effective technique. The macroencapsulation not only provides a self-supporting structure of PCM and separates the PCM from thermal fluids but also enhances the heat …

A Statically Balanced Shape-Shifting Surface, Joseph Eugene Pishnery

USF Tampa Graduate Theses and Dissertations

ABSTRACT

This paper presents a concept for producing a Statically Balanced Shape-Shifting Surface (SB-SSS). In this context, an SB-SSS is a surface that can require near-zero magnitude force changes to accomplish a change in shape while retaining effectiveness as a physical barrier. This paper focuses on how to statically balance a specifically-designed compliant mechanism and how to incorporate this mechanism into a polygonal cell.

The mechanism consists of a compliant Peaucellier-Lipkin linkage layered with a pre-stressed link as the balancer. Previous work is presented that can show how a polygonal cell can be incorporated into a surface via a tiling …

Novel Blends Of Sulfur-Tolerant Water-Gas Shift Catalysts For Biofuel Applications, Timothy Michael Roberge

USF Tampa Graduate Theses and Dissertations

As traditional sources of energy become depleted, significant research interest has gone into conversion of biomass into renewable fuels. Biomass-derived synthesis gas typically contains concentrations of approximately 30 to 600 ppm H2S in stream. H2S is a catalyst poison which adversely affects downstream processing of hydrogen for gas to liquid plants. The water-gas shift reaction is an integral part of converting CO and steam to H2 and CO2. Currently, all known water-gas shift catalysts deactivate in sulfur concentrations typical of biomass-derived synthesis gas. Novel catalysts are needed to remain active in the presence of sulfur concentrations in order to boost …

Analysis And Remediation Of Chlorinated Hydrocarbons In Environmental Media, Jonathan Ticknor

USF Tampa Graduate Theses and Dissertations

The two objectives of this work were to develop a simplified method for the analysis of chlorinated organics in water samples and to improve an existing soil remediation technology. The contaminants considered for these studies were chlorinated hydrocarbons because of their relative frequency of appearance at contaminated sites. The first half of this study involved the analysis of chlorinated ethenes by gas chromatography with flame ionization detection (GC-FID). I tested the hypothesis that the FID response factor is the same for all chlorinated ethene compounds. The rationale for this investigation is that if the hypothesis is correct, a single calibration …

Experimental And Numerical Investigation Of An Electrospray Rf Ion Funnel, Eric Miguel Tridas

USF Tampa Graduate Theses and Dissertations

Using experimental techniques along with computational fluid dynamics and electrodynamic simulations the performance of the first of three focusing elements in an electrospray macromolecular patterning system was assessed. The performance of this element, the ion funnel, was analyzed by varying the parameters and electric field applied to the system including electrospray emitter to atmosphere-vacuum interface capillary distance, temperature of the desolvating heater, injection rate of solution and the voltage applied to the jet disruption element. Results indicated that processes involved in injecting larger droplets into the chamber resulted in a less effective transmission of the ions through the funnel. Droplet …

On The Development Of The Extradosed Bridge Concept, Steven Lynn Stroh

USF Tampa Graduate Theses and Dissertations

The Extradosed Prestressed Bridge represents a relatively new bridge type. The first of this type bridge was constructed in Japan in 1994, and Japan has since built at least 29 examples of this bridge type. Throughout the rest of the world, another 34 of this bridge type have been built, with most countries having only one, or at most a few, examples. A broader application of this bridge type has been hampered by lack of design information and in particular lack design criteria for the stay cables. The purpose of this dissertation is to progress the understanding and application of …

Shelf-Scale Mapping Of Fish Distribution Using Active And Passive Acoustics, Carrie Christy Wall

USF Tampa Graduate Theses and Dissertations

Fish sound production has been associated with courtship and spawning behavior. Acoustic recordings of fish sounds can be used to identify distribution and behavior. Passive acoustic monitoring (PAM) can record large amounts of acoustic data in a specific area for days to years. These data can be collected in remote locations under potentially unsafe seas throughout a 24-hour period providing datasets unattainable using observer-based methods. However, the instruments must withstand the caustic ocean environment and be retrieved to obtain the recorded data. This can prove difficult due to the risk of PAMs being lost, stolen or damaged, especially in highly …

Catalytic Tri-Reforming Of Biomass-Derived Syngas To Produce Desired H2:Co Ratios For Fuel Applications, Devin Mason Walker

USF Tampa Graduate Theses and Dissertations

This study focuses on upgrading biomass derived syngas for the synthesis of liquid fuels using Fischer-Tropsch synthesis (FTS). The process includes novel gasification of biomass via a tri-reforming process which involves a synergetic combination of CO2 reforming, steam reforming, and partial oxidation of methane. Typical biomass-derived syngas H2:CO is 1:1 and contains tars that deactivate FT catalyst. This innovation allows for cost-effective one-step production of syngas in the required H2:CO of 2:1 with reduction of tars for use in the FTS. To maximize the performance of the tri-reforming catalyst, an attempt to control oxygen mobility, thermal stability, dispersion of metal, …

Smart Packaging: A Novel Technique For Localized Drug Delivery For Ovarian Cancer, Eva Christabel Williams

USF Tampa Graduate Theses and Dissertations

Localized drug delivery is emerging as an effective technique due to its ability to administer therapeutic concentrations and controlled release of drugs to cancer sites in the body. It also prevents the contact of harsh chemotherapy drugs to healthy regions in the body that otherwise would become exposed to current treatments.

This study reports on a model chemotherapy drug delivery system comprising non-ionic surfactant vesicles (niosomes) packaged within a temperature-sensitive chitosan network. This smart packaging, or package-within-a package system, provides two distinct advantages. First, the gel prevents circulation of the niosomes and maintains delivery in the vicinity of a tumor. …

Effects Of Random Cross-Sectioned Distributions, Fiber Misalignment And Interphases In Three-Dimensional Composite Models On Transverse Shear Modulus, Jarrett Zitko

USF Tampa Graduate Theses and Dissertations

Finite element analysis was implemented to evaluate the transverse shear modulus of a unidirectional glass/epoxy fiber-matrix composite based on pure shear displacement boundary conditions. Unit cells consisting of three-dimensional glass cylinders surrounded in square-cuboid epoxy matrices were modeled to represent "Representative Volume Element" (RVE) configurations in periodic and random-periodic square cell arrangements of variable size. Three RVEs were constructed and analyzed: A single unit cell, a 9-cell (3 x 3) array, and a 25-cell (5 x 5) array. Additionally, the unit cell was modeled to include an interphase. Three sets of cell arrangements were constructed and evaluated: a periodic square …