Education Commons^™

Radiation Exposure Calibration Of The Al2o3:C With Radium-226 And Cesium-137 Using The Osl Method, Selma Tepeli Aydin

All Theses

Optically stimulated luminescence (OSL) dosimetry was utilized to calibrate Al₂O₃:C powder dosimeters, available commercially as the nanoDot® from Landauer Inc., and compare the dosimeter response to radium-226 (²²⁶Ra) and cesium-137 (¹³⁷Cs). The signal from the OSL was quantified using a microSTARii^® OSL reader also produced by Landauer Inc. Dose-response curves were developed for ²²⁶Ra and ¹³⁷Cs experiments (5 dosimeters each) at thirteen absorbed doses. Individual dosimeter response was tracked by serial number. Linear regression analysis was performed to determine if there were significant differences between the intercepts of the …

Fungi In Flux | Designing Regenerative Materials And Products With Mycelium, Arvind Bhallamudi

Masters Theses

As the world grapples with the escalating crisis of climate threats and environmental degradation, this research delves into the synergistic potential of design and biology, developing safe and sustainable materials for applications in prototyping, furniture and interior design. Harnessing the power of a unique organism - fungi, the study proposes an accessible, efficient, and resilient material resource system. It utilizes local waste streams and mycelium (the vegetative part of fungi) to grow functional structures. An experimental and small-scale protocol is modeled by testing bio-fabrication and bio-printing methods. The composites' performance qualities and characteristics are evaluated through mechanical testing and a …

Magnetic And Structural Effects In Interfacial Magnetism: Molecular Magnets And Ferrimagnetic Alloys, Jenae E. Shoup

USF Tampa Graduate Theses and Dissertations

Magnetic thin films are important for technological applications such as giant magnetoresistance,spin valves and magnetic tunnel junctions. A key feature for these applications to be possible is the interface between two materials. We will be studying two types of thin film magnetism; interfaces between molecular carbon, C60, and non-magnetic/ferromagnetic material and two layers of ferrimagnetic rare earth/ transition metal alloys (RE/TM) that have similar composition to engineer a magnetic tunable interface.

One of the most unexpected spin-related properties of C60 is the emergence of room-temperature ferromagnetism in multilayer films of C60 and non-ferromagnetic transition metals such as Cu or Mn …

Spin Coupling In Magnetic Core - Shell Nanoparticles, Corisa Kons

USF Tampa Graduate Theses and Dissertations

Magnetic nanoparticles (NPs) have garnered much interest due to the unique properties that emergewhen compared to their bulk counterparts. In particular, core-shell (CS) NPs offer the ability to tailor the magnetic properties of the system through careful selection of core and shell constituent materials. In this work, the magnetic ordering of CS NPs with contrast in core/shell features (moment, anisotropy, coercivity, etc.) have been investigated using a combination of X-ray magnetic circular dichroism spectroscopy (XMCD) and polarized small angle neutron scattering (SANS). First, temperature-dependent analyses of XMCD and SANS studies were carried out for CS NPs featuring a core composed …

Material And Topographically Optimized Thermal Dissipation For High-Performance Electronic Devices Utilizing Vapor Chambers, Derek Joseph Daniels

USF Tampa Graduate Theses and Dissertations

Advances in materials science and engineering in the field of thermal transport and dissipation enable the use of higher-performance electronic devices that are smaller and generate more heat. Phase change thermal transport systems such as heat pipes and vapor chambers enable passive dissipation from devices that generate excessive heat without the need for actively pumped cooling systems. Properly designed vapor chamber enabled systems easily exceed the thermal conductivity of manufactured diamond at a small fraction of the cost.[1][2][3] While heat pipe phase change systems are generally one-dimensional with a limited cross section, vapor chambers are generally two-dimensional with a small …

Laser-Induced Modifications In Two-Dimensional Materials, Tariq Afaneh

USF Tampa Graduate Theses and Dissertations

Atomically thin two-dimensional (2D) materials have attracted a growing interest in the lastdecade from the fundamental point of view as well as their potential applications in functional devices. Due to their high surface-to-volume ratio, the physical properties of 2D materials are very sensitive to the environmental factor such as surrounding media and illumination conditions (e.g. light-mater interaction). In the first part of this dissertation I will present recent advances in developing laser-assisted methods to tune the physical properties of 2D transition metal dichalcogenides (TMDs). We demonstrate laser-assisted chemical modification ultrathin TMDs, locally replacing selenium by sulfur atoms. The photo-conversion process …

Product Realization Capstone: Element Proof Safety Steps For Willie Price Lab School, Catherine Thomas, Allan Heuerman, Jared Mumme

Honors Theses

The purpose of this document is to describe the process we took to complete our capstone which paired the Center for Manufacturing Excellence with the Willie Price Lab School. The goal of the capstone was to remake step stools for the students of Willie Price, as the last stools failed to withstand weather damage. However, with the COVID-19 pandemic, plans were hindered, shifting the goal from actually producing the steps to creating instructions so that a younger Center for Manufacturing class could complete the production at a later date. Standardized Work Instructions, a detailed production plan, and engineering drawings were …

Designing An Adjustable And Transportable Staircase, Allison Currey

Undergraduate Honors Thesis Projects

People climb stairs every day, whether it is at work, a store, or at home; however, there are populations such as people who are elderly, with pathologies, with Parkinson’s disease, or have suffered from a stroke that see climbing the stairs as a challenging task and it decreases their mobility and quality of life. Factors such as muscle weakness, strategy, and balance have been previously investigated in these populations during stair climbing. However, few studies have researched how stair climb ability, balance, and perception of difficulty are influenced by step height. The objective of this thesis is to design a …

Tabletop Mechanical Tester, Jamie Dombroski, Brian English, Richard Leffler, Andrew Shirk

Williams Honors College, Honors Research Projects

The need for hands-on and face-to-face experiences in the engineering classroom is very great. The equations, principles, and concepts can all be learned, but without the visual and tactile application, these don’t always sink in or become concrete. A small-scale tensile test machine was designed, sourced, manufactured, and tested for the purpose of being applied in classroom settings to provide this experience to engineering students. Extensive research was performed concerning tensile machines on the market, the essential elements of which are the load cell, grips, crosshead, extensometer, motor, and frame. The raw materials for the frame were purchased and drawings …

Accelerated Creative Problem Solving And Product Improvement Applied To Experimental Devices In A Bloodstain Pattern Interpretation Class--Improving The Role Of Insight Development Tools As A Generator Of New Ideas In Novel Situations, Douglas Ridolfi

Creativity and Change Leadership Graduate Student Master's Projects

This project uses an action research centered study protocol to examine the effects of a problem-based learning exercise related to bloodstain pattern interpretation in a crime scene processing and general criminalistics class taught as part of an upper division forensic chemistry major in a four year college. The goal is to apply design principles and creative problem solving methods directly adapted to a project involving interpreting a set of crime scene photographs depicting blood spatter and with the aid of guided exercises in ideation and design, lead students into the development of alternate theories of how the bloodstains were created …

Computational Discovery Of Energetic Polynitrogen Compounds At High Pressure, Brad A. Steele

USF Tampa Graduate Theses and Dissertations

High-nitrogen-content energetic compounds containing multiple N-N bonds are an attractive alternative towards developing new generation of environmentally friendly, and more powerful energetic materials. High-N content translates into much higher heat of formation resulting in much larger energy output, detonation pressure and velocity upon conversion to large amounts of non-toxic, strongly bonded N2 gas. This thesis describes recent advances in the computational discovery of group-I alkali and hydrogen polynitrogen materials at high pressures using powerful first-principles evolutionary crystal structure prediction methods. This is highlighted by the discovery of a new family of materials that consist of long-sought after all-nitrogen N􀀀 5 …

Can A Comprehensive Transition Plan To Barefoot Running Be The Solution To The Injury Epidemic In American Endurance Runners?, Michael A. Scarlett

CMC Senior Theses

Fossils belonging to the genus Homo, dating as far back as two million years ago, exhibit uniquely efficient features suggesting that early humans had evolved to become exceptional endurance runners. Although they did not have the cushion or stability-control features provided in our modern day running shoes, our early human ancestors experienced far less of the running-related injuries we experience today. The injury rate has been estimated as high as 90% annually for Americans training for a marathon and as high as 79% annually for all American endurance runners. There is an injury epidemic in conventionally shod populations that …

Organometal Halide Perovskite Solar Absorbers And Ferroelectric Nanocomposites For Harvesting Solar Energy, Chaminda Lakmal Hettiarachchi

USF Tampa Graduate Theses and Dissertations

Organometal halide perovskite absorbers such as methylammonium lead iodide chloride (CH₃NH₃PbI₃-_xCl_x), have emerged as an exciting new material family for photovoltaics due to its appealing features that include suitable direct bandgap with intense light absorbance, band gap tunability, ultra-fast charge carrier generation, slow electron-hole recombination rates, long electron and hole diffusion lengths, microsecond-long balanced carrier mobilities, and ambipolarity. The standard method of preparing CH₃NH₃PbI₃-_xCl_x perovskite precursors is a tedious process involving multiple synthesis steps and, the chemicals being used (hydroiodic acid …

Understanding Gas Sorption Mechanisms In Metal–Organic Materials Via Computational Experimentation, Katherine A. Forrest

USF Tampa Graduate Theses and Dissertations

Metal–organic materials (MOMs), a type of porous crystalline structure composed of organic ligands jointed with metal ions, have captured the interest of scientists as potentially useful in gas sorption applications. Some of the most crucial avenues of investigation are in H2 storage (for use as a clean burning fuel source) and CO2 capture and sequestration (to remove the greenhouse gas from the environment).

A major advantage of MOMs for such applications is their high variability in terms of physical dimensions and chemical moieties, based on composition and synthesis conditions, making them potentially customizable for specific application if necessary structural characteristics …

Analysis Of Tool Wear And Tool Life Of Cutting Tool Inserts Using Statistical Process Control Charts: A Case Study, Evan R. Ferrell

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Business and Technology at Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science by Evan R. Ferrell on April 28, 2017.

3d Printing, Open-Source Technology And Their Applications In Research, Chenlong Zhang

Dissertations, Master's Theses and Master's Reports

Open-source software received tremendous success as it drives down the cost of software and expand the distribution. Open-source hardware, as part of the open-source movement, has just risen into public attention for its potential to further drive down the cost of all kinds of manufacturing goods and reshape the manufacture chain. In this report we explores the history, development and the future of open-source hardware project, summarizing the opportunities, challenges and possible solutions. 3D printing is demonstrated as a booster to assist open-source hardware’s development. Low-cost 3D printer enables at-home and in-time fabrication, the download-print-use-improve-distribute cycle is established to encourage …

Electrospun Plant Protein Scaffolds With Fibers Oriented Randomly And Evenly In Three-Dimensions For Soft Tissue Engineering Applications, Shaobo Cai

Department of Textiles, Merchandising, and Fashion Design: Dissertations, Theses, and Student Research

In this work, electrospinnable and water stable soyprotein was extracted by using a reducing agent in mild alkaline condition, and novel 3D zein and 3D pure soyprotein electrospun scaffolds with three-dimensionally and randomly oriented fibers and large interconnected pores were successfully fabricated by reducing surface resistivity of materials. This unique structure is different from most electrospun scaffolds with fibers oriented mainly in one direction. The structure of novel 3D scaffolds could more closely mimic the 3D randomly oriented fibrous architectures in many native extracellular matrixes (ECM). Confocal laser scanning microscope shows that instead of becoming flattened cells when cultured in …

Examining The Effects Of Computational Tools On Students' Conceptual Understanding Of Thermodynamics Of Material Concepts And Representations, Oyindamola Oluwatimi

Open Access Theses

Technology is becoming a more critical agent for supporting learning as well as research in science and engineering. In particular, technology-based tools in the form of simulations and virtual environments support learning using mathematical models and computational methods. The purpose of this research is to: (a) measure the value added in conveying Thermodynamics of materials concepts with a blended learning environment using computational simulation tools with lectures; and (b) characterize students' use of representational forms to convey their conceptual understanding of core concepts within a learning environment that blended Gibbs computational resource and traditional lectures.

A mix-method approach was implemented …