Education Commons^™

Arts Integration Into Elementary Science: Force And Motion And Natural Disasters, Eric C. Ooms, Tabitha M. Wu, Ashley R. Kokemuller, Sarah E. Montgomery, Audrey C. Rule

Journal of STEM Arts, Crafts, and Constructions

This study explored the effect of arts integration into science during an instructional unit on force and motion and one addressing natural weather disasters. Seventy-eight elementary students in four classrooms (grade 5, grade 4, and two at grade 3) participated in the study. This study assessed content retention, student-made products (rollercoasters and hurricane shelters), and student attitudes. All students in each classroom experienced the two units of instruction, one unit in the experimental condition of arts integration and one unit in the control condition without arts integration. Both conditions involved students in constructing models of given materials. Each unit consisted …

Second Grade Students Learn About Civil Engineers And Erosion, Andrea Earline Anderson, Jessica A. Meier

Journal of STEM Arts, Crafts, and Constructions

The integration of art into curricula focused on teaching science is a new perspective in education designed to reach a broader range of students. The current study examined the process of second-grade students participating in science and art activities through qualitative content analysis. The subjects of science and art were not taught to the students separately, rather, students engaged in both subjects simultaneously, in an integrated manner. Participants were 23 second-grade students (11 female and 12 male; age range 7 to 8 years) who were learning about erosion through sketching and creative construction and the work of civil engineers through …

Ecosystem Shake Up: An Environmental Change Adaptation Project, Hannah E. Morgan, Dana Atwood-Blaine, Audrey C. Rule

Journal of STEM Arts, Crafts, and Constructions

This practical article reports an intriguing diorama project for third grade elementary students (ages 8-9 years). Students worked as partners to create dioramas of given ecosystems made in pizza boxes. Then, students rolled a die to determine a change in some environmental factor that affected the ecosystem. The students discussed how this change affected the ecosystem and made a second part of their diorama showing the ecosystem after the change. Finally, students made class presentations concerning their dioramas and ideas. A rubric for assessing the projects is included. Results of this science project indicate that students became deeply engrossed in …

Exploring The Physics Of Sound With Steam-Azing Third Graders, Page L. Foss, Kyrie D. Borsay

Journal of STEM Arts, Crafts, and Constructions

This practical article was based on a lesson conducted with third graders from an elementary school in the Midwest who were studying concepts about sound. The lesson activities address Next Generation Science Standards that include engineering concepts, along with integrating activities that support National Core Arts Standards. The students created instruments that made music but that were not the standard string, percussion or wind orchestral instruments that they had previously studied: string, percussion, or wind. Their instruments made of recycled materials included drum and shaker combinations, animal-shaped instruments, and instruments that combined three or more instruments.

Science Through Art: Motivating Gifted And Talented Students, Ksenia Zhbanova

Journal of STEM Arts, Crafts, and Constructions

Gifted and talented students have unique characteristics and needs. Arts Integration is an effective differentiation strategy that helps meeting these students’ needs. STEM subjects are easily and organically integrated with the Arts because scientific and artistic inquiry are very similar. This practical article describes an arts-integrated project that provided the gifted and talented participants with an increased level of challenge, an opportunity for self-expression and for building social skills, amplified motivation, and a chance to deepen and demonstrate their knowledge of science, technology, engineering, mathematics, social studies and English Language Arts. In this project, identified gifted students completed figural transformations …

Editorial: Arts Integration Allows Students The Opportunity To Be Original, Ksenia S. Zhbanova, Audrey C. Rule

Journal of STEM Arts, Crafts, and Constructions

This editorial explores the other six articles in this issue 2 of volume 3 of the Journal of STEM Arts, Crafts, and Constructions to examine how originality is displayed and supported by art projects. Originality, is a quality or a characteristic of an idea, approach or product. Originality can be defined as newness or novelty. To be classified as original, an idea must be new. It does not have to have a utilitarian value, which is a requirement for an idea to be categorized as creative. Helping students develop originality is important because it allows the freedom to make any …

Using An Engineering Design Process To Bring The Local Community Into The Technology And Engineering Education Classroom, James M. Baker

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

This plan B project documents the practice of using an authentic project to teach an engineering design process to high school pre-engineering students and documenting the project preparing a manuscript for journal publication.

The manuscript prepared for publication explores the details of working with local business owners and teachers from different departments and curricular foci to design, fabricate, and install an illuminated sign for a local business. This sign project was presented by an alum of the school to provide an authentic project for multiple courses to collaboratively create a solution for a local community business. Twenty-five students in two …

Implementing Ngss Engineering Disciplinary Core Ideas In Middle School Science Classrooms: Results From The Field, Jessica Gale, Jayma Koval, Mike Ryan, Marion Usselman, Stefanie Wind

Journal of Pre-College Engineering Education Research (J-PEER)

With the inclusion of engineering disciplinary core ideas (DCIs), the Next Generation Science Standards (NGSS) position engineering as a new priority in K–12 science classrooms. This paper reports findings from the implementation of SLIDER, a problem-based learning 8th grade physical science curriculum that integrates engineering and physical science core ideas. As a culminating engineering design challenge, the SLIDER curriculum asks students to apply their understanding of energy, motion, and forces to design an automatic braking system for a robotic truck. The paper describes the curriculum and synthesizes findings from an array of data sources including student design interviews, written design …

Search And Review Of The Literature On Engineering Design Challenges In Secondary School Settings, Matthew Lammi, Cameron Denson, Paul Asunda

Journal of Pre-College Engineering Education Research (J-PEER)

Engineering design activities offer the promise of enhanced learning and teaching in pre-college science, technology, engineering, and mathematics (STEM) settings. The wide variation and lack of coherence in research and practice concerning pre-college engineering design challenges necessitates an investigation of the literature. The overarching research question guiding this search and review of literature was, ‘‘How are engineering design challenges conceptualized in pre-college environments?’’ A search and review coupled with iterative thematic analysis was employed to understand and conceptualize the current body of literature on pre-college engineering design challenges. It is anticipated that this review will provide a general picture of …

Stem Roles: How Students’ Ontological Perspectives Facilitate Stem Identities, Dina Verdín, Allison Godwin, Monique Ross

Journal of Pre-College Engineering Education Research (J-PEER)

Educational researchers have explored the importance of performance, recognition, and interest in establishing and maintaining a STEM identity. Research has also demonstrated that the ways students describe themselves and how they participate in STEM communities can provide insight into their role identity salience; however, there has been little work to explore the ontological beliefs of students about STEM people and how this influences their ability to see themselves as possessing a STEM identity. This research explores the ontological beliefs of high school students, with specific attention to the ways in which they describe what constitutes a math person, science person, …

An Investigation Of Engineering Design Cognition And Achievement In Primary School, Greg J. Strimel, Scott R. Bartholomew, Eunhye Kim, Liwei Zhang

Faculty Publications

This study examined the design cognition and achievement results of both kindergarten and fourth grade students engaged in engineering design-based instructional activities. Relationships between design cognition and student grade level, as well as quality of student work, were investigated. 30 concurrent think-aloud protocols were collected from individual primary students as they worked in groups to design and make a solution to a design task. The concurrent think-aloud protocols were examined and coded to determine the duration of time the participants devoted to a pre-established set of mental processes for technological problem solving. Significant differences between kindergarten and fourth grade participants …

Study Of Physical Layer Security And Teaching Methods In Wireless Communications, Zhijian Xie, Christopher Horne

KSU Proceedings on Cybersecurity Education, Research and Practice

In most wireless channels, the signals propagate in all directions. For the communication between Alice and Bob, an Eavesdropper can receive the signals from both Alice and Bob as far as the Eavesdropper is in the range determined by the transmitting power. Through phased array antenna with beam tracking circuits or cooperative iteration, the signals are confined near the straight line connecting the positions of Alice and Bob, so it will largely reduce the valid placement of an Eavesdropper. Sometimes, this reduction can be prohibitive for Eavesdropper to wiretap the channel since the reduced space can be readily protected. Two …

Girls Who Code 3rd-5th, Khristina Polivanov

Honors Expanded Learning Clubs

The goal of the club is to encourage girls to be confident in themselves and their abilities while teaching them basic concepts used in computer science.

Development Of A Placement Exam To Increase Student Success In A Junior Level Circuits And Systems Class, David Parent

Faculty Publications

In this work, which is intended to be a Full Paper in the Innovative Practice Category, the implementation of an improved placement exam that increased the pass rate in a junior level systems course in the author’s electrical engineering department by 15% is presented. For almost 30 years the author’s EE department has used a face to face exam to place students in a junior level circuits and systems course or into a review workshop. The details of the exam and suggestions about future use in conjunction MyOpenMath analytics to increase student success are also given.

Examination The Impact Of Various Factors On Student Success In An Introduction To Circuit Analysis Course, David Parent

Faculty Publications

In this work in progress, several models to predict student success in a sophomore introduction to circuit analysis class were created based on prior grade point average, grade in a pre-requisite physics class, the semester the pre-requisite physics class was taken, the number of units a student was taking, the number of times a student repeated the circuits class, and the number of times a student repeated any class prior to enrollment. While all models were statistically significant, the model that included prior GPA and the grade in a pre-requisite physics was the most significant for the data collection effort. …

Integration Of An Electrical Engineering Capstone Course With Social Justice And Global Studies, David Parent, Patricia Backer

Faculty Publications

A four course package (six units total) consisting of two general education (GE) classes and two electrical engineering capstone classes that are taught in a highly integrated manner, that not only meets university GE requirements, but also meets the new ABET criteria in which the need to address a societal need is embedded with design criteria. The prompts for the new integrated GE/capstone Assessment results are also presented, along with methods to increase student motivation for studying GE.

Taking Professional Development From 2d To 3d: Design-Based Learning, 2d Modeling, And 3d Fabrication For Authentic Standards-Aligned Lesson Plans, Darran R. Cairns, Reagan Curtis, Konstantinos A. Sierros, Johnna J. Bolyard

Interdisciplinary Journal of Problem-Based Learning

There is currently significant interest in 3D fabrication in middle school classrooms. At its best 3D printing can be utilized in authentic design projects that integrate math, science, and technology, which facilitate deep learning by students. In essence, students are able to tinker in a virtual world using 3D design software and then tinker in the real world using printed parts. We describe a professional development activity we designed to enable middle school teachers who had taken part in a three-year Math Science Partnership program to authentically integrate 3D printing into design-based lessons. We include some examples of successful design-based …

Growing Entrepreneurial Mindset In Interdisciplinary Student Engineers: Experiences Of A Project-Based Engineering Program, Elizabeth Pluskwik, Eleanor Leung, Andrew Lillesve

Integrated Engineering Department Publications

Engineering education models have recently embraced the entrepreneurial mindset as a desired outcome of undergraduate engineering education. Interdisciplinary active learning strategies have been suggested as an effective pedagogy for engaging student engineers in undergraduate engineering education. Recent research suggests that active, social learning in context can lead to improvements in learner innovation, problem-solving, curiosity, retention and accessibility of knowledge, value-creation, and other desired learning outcomes. Much of the recent adoption of active and collaborative learning, self-directed learning, problem-based and project-based learning (PBL), peer to peer learning, and other similar learning strategies are aimed at developing innovative and entrepreneurial mindset skills, …

Effectiveness Of Gamification Activities In A Project-Based Learning Classroom, Eleanor Leung, Elizabeth Pluskwik

Integrated Engineering Department Publications

The purpose of this research is to analyze the effectiveness, and student's self-reported engagement with gamification tools on a student's learning of technical concepts when used in a project-based learning (PBL) engineering classroom environment. Gamification, as defined in this study, is the use of game-based elements such as online audience response systems with automated feedback in non-game situations. By adding gamification to the classroom, we hope to further build on the active and collaborative learning environment that our PBL program already provides. Five gamification activities were implemented during the Fall 2017 semester with junior and senior student engineers enrolled in …

Work In Progress: Institutional Context And The Implementation Of The Redshirt In Engineering Model At Six Universities, Ann Delaney, Donna C. Llewellyn, Janet Callahan

Materials Science and Engineering Faculty Publications and Presentations

Low-income students are underrepresented in engineering and are more likely to struggle in engineering programs. Such students may be academically talented and perform well in high school, but may have relatively weak academic preparation for college compared to students who attended better-resourced schools. Four-year engineering and computer science curricula are designed for students who are calculus-ready, but many students who are eager to become engineers or computer scientists need additional time and support to succeed. The NSF-funded Redshirt in Engineering Consortium was formed in 2016 as a collaborative effort to build on the success of three existing “academic Redshirt” programs …

The Redshirt In Engineering Consortium: Progress And Early Insights, Janet Callahan, Donna C. Llewellyn, Ann E. Delaney

Materials Science and Engineering Faculty Publications and Presentations

The NSF-funded Redshirt in Engineering Consortium was formed in 2016 with the goal of enhancing the ability of academically talented but underprepared students coming from lowincome backgrounds to successfully graduate with engineering degrees. The Consortium takes its name from the practice of redshirting in college athletics, with the idea of providing an extra year and support to help promising engineering students complete a bachelor’s degree. The Consortium builds on the success of three existing “academic redshirt” programs and expands the model to three new schools. The Existing Redshirt Institutions (ERIs) help mentor and train the new Student Success Partners (SSPs), …

Second Year Of Using The Sidekick Basic Kit For Ti Launchpad With Elementary School Students, Tara N. Kimmey, Cameron H.G. Wright, Thad B. Welch

Electrical and Computer Engineering Faculty Publications and Presentations

This paper describes a second year, follow-on study in which 4^th and 5^th grade students were exposed to engineering-related topics using a microcontroller, input/output circuitry, sensors, and the associated software coding needed to achieve a desired functionality of the hardware. The first year study was described in a paper presented at the 2017 ASEE Annual Conference. This second year study took students to the “next level,” and showed very promising results.

Developing An Evaluation Tool To Examine Motivational Factors Of Non-Student Community Partnership Participants, Julia Thompson, Jinny Rhee

Faculty Publications, Mechanical Engineering

Research of engineering community engagement has primarily focused on the experiences and outcomes of students, yet it is often the faculty, administrators, and community partners who have a long-term commitment to the program’s success. In this study, we are developing and validating an assessment instrument that combines two previously identified aspects of community engagement programs: participant motivation and the nature of engagement relationships. Participant motivation refers to the reasons people stay engaged in the community engagement experience and can be categorized into: student learning and growth, personal and professional development, and benefits to the community organization. The nature of an …

Incorporating Diegetic Elements To Increase Engagement In Games For Engineering Education, Katherine Smith, Yuzhong Shen, Anthony W. Dean

VMASC Publications

One of the difficulties in developing educational games is maintaining player engagement. This engagement is critical for games to provide effective learning experiences. One way to increase engagement in games is to limit interruptions during game play. In educational games, this can be accomplished by incorporating learning or problem-solving elements diegetically. Diegetic elements are those that are part of the game scene. With this in mind, a series of games for Science, Technology, Engineering, and Mathematics (STEM) education has been developed focusing on content in courses that are prerequisites to the engineering curriculum. These games cover topics in pre-calculus, calculus, …

Advancing The Engineering Field: Opportunities To Support Transfer Students, Vukica M. Jovanovic, Narketta Sparkman-Key, Konstantin P. Cigularov, Daniela Cigularova, Bonita G. Anthony, Otilia Popescu

Engineering Technology Faculty Publications

Advancements in technology have made it vital that technicians advance their skills to stay current and competitive in the job market. Many technicians choose to transfer to baccalaureate programs in engineering and other STEM fields in order to advance their skills. As a result, engineering programs usually have a large population of transfer students. Many of transfer students are studying while employed in the field and some juggle a career and family while advancing their education. Accordingly, transfer students face various issues when transferring to different university settings. Some of these issues are related to embeddedness into the university community …

Lessons From Two Years Of Eportfolio Implementation In Engineering Technology Courses, Orlando M. Ayala, Otilia Popescu

Engineering Technology Faculty Publications

In an undergraduate as well as in a graduate academic setting, an ePortfolio is a collection of student work designed to exhibit student’s achievements, which often includes student’s reflective commentaries. While in academia ePortfolios are used to document the student learning process over time, they have been also well received by employers as work portfolios or showcases. This paper provides detailed explanations of two years of implementation of ePortfolio activities in junior and senior level engineering technology courses. The goal of the paper is to present to the community the best practices learned during the implementation and to provide information …

Improving Introductory Computer Science Education With Draco, Mike Dongyub Ryu

Master's Theses

Today, many introductory computer science courses rely heavily on a specific programming language to convey fundamental programming concepts. For beginning students, the cognitive capacity required to operate with the syntactic forms of this language may overwhelm their ability to formulate a solution to a program.

We recognize that the introductory computer science courses can be more effective if they convey fundamental concepts without requiring the students to focus on the syntax of a programming language. To achieve this, we propose a new teaching method based on the Design Recipe and Code Outlining (DRaCO) processes. Our new pedagogy capitalizes on the …

Creating The Fleet Maker - Lessons Learned From The First Series Of Workshops On Maker Concepts For Active Duty Personnel, Karina Arcaute, Michel Albert Audette, Vukica Jovanovic, Anthony Dean, Dipankar Ghosh

STEMPS Faculty Publications

The US Navy has supported research related to the 3D printing or Additive Manufacturing area for more than 20 years. More recently, efforts like the Print the Fleet initiative and Marine Makers are exploring ways to design and create solutions to future problems with the possibility of reducing maintenance costs, increasing equipment readiness, and improving combat effectiveness. The Creating the Fleet Maker project is an effort supported by the Navy and Marine Corps Science, Technology, Engineering and Mathematics Education, Outreach and Workforce Program of the Office of Naval Research. It examines the concept of making in order to develop skills …

How To Shape Attitudes Toward Stem Careers: The Search For The Most Impactful Extracurricular Clubs, Fethiye Ozis, Ali Osman Pektas, Mustafa Akca, Daniel’Le April Devoss

Journal of Pre-College Engineering Education Research (J-PEER)

It is well known that strong extracurricular STEM programs provide multiple arenas for students to expand on classroom curriculum, complementing STEM skills with creative thinking and open-ended problem solving. It has been shown that there is a relationship between the number of STEM clubs students participated in and their choice of STEM major (Sahin, 2013). Considering financial problems, including budget cuts, it gets really challenging for schools to provide a plethora of clubs. For this reason, it would be very beneficial for K–12 schools to know if certain clubs are more effective in changing attitudes toward STEM majors, and therefore …

‘‘Lend A Hand’’ Project Helps Students: Improved Spatial Visualization Skills Through Engaging In Hands-On 3-D Printed Prosthetics Project During A 9th Grade Engineering Course, Shaunna Smith, Kimberly Talley

Journal of Pre-College Engineering Education Research (J-PEER)

Research shows that high spatial ability is linked to success and persistence in STEM. Empirical investigations often report a gender gap in favor of male students. The purpose of this research study was to assess changes to 9th grade engineering students’ spatial visualization skills through engagement in a nine-week collaborative 3-D printed prosthetics project embedded within their existing ‘‘Beginning Concepts of Engineering’’ course curriculum. Using concurrent mixed methods, this study examined pre-/post-test scores on the Revised Purdue Spatial Visualization Test: Rotations (Revised PSVT:R) in connection with gender, course grades, and level of involvement in the project. Both male and female …