Education Commons^™

Vr Circuit Simulation With Advanced Visualization For Enhancing Comprehension In Electrical Engineering, Elliott Wolbach

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

As technology advances, the field of electrical and computer engineering continuously demands innovative tools and methodologies to facilitate effective learning and comprehension of fundamental concepts. Through a comprehensive literature review, it was discovered that there was a gap in the current research on using VR technology to effectively visualize and comprehend non-observable electrical characteristics of electronic circuits. This thesis explores the integration of Virtual Reality (VR) technology and real-time electronic circuit simulation with enhanced visualization of non-observable concepts such as voltage distribution and current flow within these circuits. The primary objective is to develop an immersive educational platform that makes …

Steminism: Analyzing Factors That Improve Retention Of Women In Stem, Kira Carter, Jane Kelley, Jason Vasser-Elong, Rc Patterson

Dissertations

Our co-authored research ‘Steminism: Analyzing Factors That Improve Retention for Women as STEM Majors’ analyzed factors that contributed to the retention of women in science, technology, engineering, and mathematics (STEM) programs at Missouri University of Science & Technology (Missouri S&T). Women make up half of the US population, and while careers in (STEM) are an integral part of the US economy, women are underrepresented in these career fields. The purpose of our dissertation is to address the underrepresentation of women in STEM majors. Our methodology included homogeneous sampling to collect qualitative data. More specifically, we consulted with academic advisors and …

Support The Next Generation By Sponsoring The 2024 Windstorm Challenge!, Advanced Structures And Composites Center

General University of Maine Publications

The Windstorm Challenge is a unique opportunity for middle and high school students to get hands-on engineering practice at the Advanced Structures and Composites Center (ASCC). Organized by the same team that brings you AFloat, the Windstorm Challenge seeks to educate the next generation of floating offshore wind innovators.

Reducing Food Scarcity: The Benefits Of Urban Farming, S.A. Claudell, Emilio Mejia

Journal of Nonprofit Innovation

Urban farming can enhance the lives of communities and help reduce food scarcity. This paper presents a conceptual prototype of an efficient urban farming community that can be scaled for a single apartment building or an entire community across all global geoeconomics regions, including densely populated cities and rural, developing towns and communities. When deployed in coordination with smart crop choices, local farm support, and efficient transportation then the result isn’t just sustainability, but also increasing fresh produce accessibility, optimizing nutritional value, eliminating the use of ‘forever chemicals’, reducing transportation costs, and fostering global environmental benefits.

Imagine Doris, who is …

The Roadmap To An Improved Braille Display Design, Emma Garofalo, Trey Alexander, Luke Shankland, Michael Smith, Michael Cheng, Michael Bishai, Lauren Sun

Student Scholar Symposium Abstracts and Posters

Our innovative braille display, focused on affordability and education, fills a notable void in the market of refreshable braille displays, which are typically costly and not designed primarily for educational use. This product stands out as an economical educational aid for people with visual impairments. It features a system where pressing a keyboard alphabet key corresponds to specific braille pins, allowing for the display of letters or characters. Additionally, our design can represent simple geometric shapes, like circles or squares, using the braille pins. When these pins are raised, the user can feel the braille representation of the character or …

Creating An Automatic Lowering Function For Quarter-Scale Tractor Pulling Sled, Sam Wilkins

Honors Theses

As the agricultural industry works to continuously integrate innovative technology and improve production efficiency, improved on-board data acquisition and transmission will be necessary for all agricultural machines. To make this a reality, the utilization of controller area network (CAN) technology will be crucial. Therefore, it is important for all agricultural engineers to have foundational knowledge of CAN bus systems and the standards that govern their use in industry. The UNL quarter-scale tractor team regularly utilizes CAN buses on their tractors and testing equipment. One such testing machine is the team’s pulling sled, which uses CAN messages to transport important information …

Credit Hour Analysis, Tushar Ojha, Don R. Hush, Elias S. Lopez

Electrical & Computer Engineering Technical Reports

This report presents a detailed analysis of the credit hour usage pattern of undergraduate students at the University of New Mexico (UNM) using custom analytical tools. We introduce a credit-tree framework for analyzing credit hour efficiency. This framework leverages a custom-built specialized audit tool for categorizing student credits. More specifically, student credits are assigned to one of three categories: unusable credits that do not match any degree requirement, excess credits that can be removed without changing the requirement satisfaction, and applied credits that contribute to requirement satisfaction without excess. Clearly, this enables credit analysis at the course and degree requirement …

Renewable Energy Educational Delivery System, Ryan Integlia

36th Florida Conference on Recent Advances in Robotics

Technology advancing rapidly and affecting our daily lives in more ways than ever before, it is clear that technology is now a driving force in our world. STEM disciplines are one of the key driving forces behind human progress, as their efforts have provided us with new levels of comfort and security. Every facet of engineering contributes to enhancing almost every aspect of our lives. As technology continues to evolve, the demand for skilled engineers will only increase. Therefore, it is essential that STEM education system adapts to the needs of today's digitized, diversified, and rapidly changing society through an …

Long-Term Human Participation Detection Using A Dynamic Scene Analysis Model, Wenjing Shi

Electrical and Computer Engineering ETDs

The dissertation develops new methods for assessing student participation in long (>1 hour) classroom videos. First, the dissertation introduces the use of multiple image representations based on raw RGB images and AM-FM components to detect specific student groups. Second, a dynamic scene analysis model is developed for tracking under occlusion and variable camera angles. Third, a motion vector projection system identifies instances of students talking.

The proposed methods are validated using digital videos from the Advancing Out-of-school Learning in Mathematics and Engineering (AOLME) project. The proposed methods are shown to provide better group detection, and better talking detection at …

Ict Security Tools And Techniques Among Higher Education Institutions: A Critical Review, Miko Nuñez, Xavier-Lewis Palmer, Lucas Potter, Chris Jordan Aliac, Lemuel Clark Velasco

Electrical & Computer Engineering Faculty Publications

Higher education institutions (HEIs) are increasingly relying on digital technologies for classroom and organizational management, but this puts them at higher risk for information and communication (ICT security attacks. Recent studies show that HEIs have experienced more security breaches in ICT security composed of both cybersecurity an information security. A literature review was conducted to identify common ICT security practices in HEIs over the last decade. 11 journal articles were profiled and analyzed, revealing threats to HEIs’ security and protective measures in terms of organizational security, technological security, physical security, and standards and frameworks. Security tools and techniques were grouped …

Ethics In Engineering Education: Is Abet Enough?, Alyssa Delouise

The Journal of Purdue Undergraduate Research

No abstract provided.

Electronic Circuits And Machines, Sheila D. Hill Pe

KSU Distinguished Course Repository

This course covers the electrical characteristics of fundamental circuit components including resistors, capacitors and inductors in DC circuits, single-phase AC and three-phase AC circuits. Fundamental concepts of AC power and phasors are examined. The course also introduces the devices that generate and transform electrical power, as well as switching and protection of electrical circuits. Practical applications of motors, generators, transformers and operational amplifiers will be covered to provide non-electrical engineering majors a comprehensive understanding of electro-mechanical systems.

Integrating Plcs With Robot Motion Control In Engineering Capstone Courses, Sanjeevi Chitikeshi, Shirshak K. Dhali, Vukica Jovanovic

Engineering Technology Faculty Publications

Robotic motion control methods and Programmable Logic Controllers (PLCs) are critical in engineering automation and process control applications. In most manufacturing and automation processes, robots are used for moving parts and are controlled by industrial PLCs. Proper integration of external I/O devices, sensors and actuating motors with PLC input and output cards is very important to run the process smoothly without any faults and/or safety concerns. Most traditional electrical and computer engineering (ECE) programs offer high level of motion theory and controls but little hands-on exposure to PLCs which are the main industrial controllers. This paper provides a framework for …

Outdoor Operations Of Multiple Quadrotors In Windy Environment, Deepan Lobo

Dissertations

Coordinated multiple small unmanned aerial vehicles (sUAVs) offer several advantages over a single sUAV platform. These advantages include improved task efficiency, reduced task completion time, improved fault tolerance, and higher task flexibility. However, their deployment in an outdoor environment is challenging due to the presence of wind gusts. The coordinated motion of a multi-sUAV system in the presence of wind disturbances is a challenging problem when considering collision avoidance (safety), scalability, and communication connectivity. Performing wind-agnostic motion planning for sUAVs may produce a sizeable cross-track error if the wind on the planned route leads to actuator saturation. In a multi-sUAV …

Real Time Audio Processing Using A Low-Power Digital Signal Processor, Aaron Norlinger

Honors Theses

This project focused on the creation of a series of audio processing functions that could run in real time on the ezDSP5502 processor. The Digital Signal Processor (DSP) being used for this project is an industry standard for lowpower signal processing applications. The overall goal was to have a code base that could sample audio in real time from any source, filter it in a variety of ways, run a Fast Fourier Transform on the audio, display the resulting frequency data to an LCD screen, and then output the filtered audio to an external speaker. This general process is used …

Speaker Diarization And Identification From Single-Channel Classroom Audio Recording Using Virtual Microphones, Antonio Gomez

Electrical and Computer Engineering ETDs

Speaker identification in noisy audio recordings, specifically those from collaborative learning environments, can be extremely challenging. There is a need to identify individual students talking in small groups from other students talking at the same time. To solve the problem, we assume the use of a single microphone per student group without any access to previous large datasets for training.

This dissertation proposes a method of speaker identification using cross-correlation patterns associated to an array of virtual microphones, centered around the physical microphone. The virtual microphones are simulated by using approximate speaker geometry observed from a video recording. The patterns …

Analyzing Student Credits, Don R. Hush, Elias S. Lopez, Wisam Al-Doroubi, Tushar Ojha, Brianne Santos, Kevin Warne

Electrical & Computer Engineering Technical Reports

This report describes methods for decomposing student credits into three categories: applied, unusable, and excess where applied credits count towards the student's degree requirements, unusable credits do not count towards any degree requirement, and excess credits exceed one or more degree requirement specifications. These methods enable multiple types of analysis including student progress assessment, student planning (i.e. helping the student determine the best path forward), credit efficiency analysis (i.e. quantifying the number of applied versus unusable and excess credits), transfer credit analysis (i.e. determining the utility and efficiency of transfer credits), and requirement analysis (i.e. determining the types of requirements …

The Music Bluetooth Controller: An Intersection Between Technology And Music, Lydia Wu

Senior Honors Theses

The modern musician faces a new challenge: how can technology be used to enhance a performance? This thesis documents the development of a Bluetooth remote controller that will aid today’s performing musicians by interacting with a digital display (e.g., an iPad) to flip musical score pages remotely. At its core, while mimicking a Bluetooth pedal (the current industry standard), this device attaches to the musician’s hand. In its pilot stages, the device has been referred to “MBC” (Music Bluetooth Controller).

Impact Of Teaching Practices And Communication Climates On Participation In Computer Science Education, Jackie Krone

Master's Theses

One way to understand teaching is to view it as a people process rather than a presentation of knowledge. It follows that the role of an educator often extends beyond the primary subject matter and into the realm of classroom management. With this in mind, our research aimed to capture the various teaching practices, participation patterns, and communication climates that occur in virtual computer science classrooms. We sought to answer the following research questions related to virtual computer science classrooms at our institution: Who participates in virtual computer science classrooms, and is participation proportional to student demographics? Is there any …

Engagement Detection Using Prosodic Cues: An Approach For Measuring Child Emotional Engagement Level In Child-Robot Interaction Scenario, Mustafa Oztoprak

Graduate Research Theses & Dissertations

The ultimate goal of advanced child-robot interaction is to develop a high-level intelligencecommunication channel in a closed-loop configuration with the child as the focal point of the instructional scenario. This goal can be met by establishing efficient sensing mechanisms on the robot’s side, such as automatic engagement measuring, which will allow the robot to alter its behavior or even the instructional scenario’s execution.Recent researches, regarding engagement recognition systems mostly based on facial or multi-modal features.We would like to investigate this topic using prosodic cues only. We believe speech characteristics are more likely to be related to child speaker engagement level.This …

Predicting Pair Success In A Pair Programming Eye Tracking Experiment Using Cross-Recurrence Quantification Analysis, Maureen M. Villamor, Maria Mercedes T. Rodrigo

Department of Information Systems & Computer Science Faculty Publications

Pair programming is a model of collaborative learning. It has become a well-known pedagogical practice in teaching introductory programming courses because of its potential benefits to students. This study aims to investigate pair patterns in the context of pair program tracing and debugging to determine what characterizes collaboration and how these patterns relate to success, where success is measured in terms of performance task scores. This research used eye-tracking methodologies and techniques such as cross-recurrence quantification analysis. The potential indicators for pair success were used to create a model for predicting pair success. Findings suggest that it is possible to …

Integration Of Blockchain Technology Into Automobiles To Prevent And Study The Causes Of Accidents, John Kim

Electronic Theses, Projects, and Dissertations

Automobile collisions occur daily. We now live in an information-driven world, one where technology is quickly evolving. Blockchain technology can change the automotive industry, the safety of the motoring public and its surrounding environment by incorporating this vast array of information. It can place safety and efficiency at the forefront to pedestrians, public establishments, and provide public agencies with pertinent information securely and efficiently. Other industries where Blockchain technology has been effective in are as follows: supply chain management, logistics, and banking. This paper reviews some statistical information regarding automobile collisions, Blockchain technology, Smart Contracts, Smart Cities; assesses the feasibility …

Predicting Student Success In An Electrical Engineering Program, Edward Carl Greco Jr., Matthew Garett Young

Faculty Publications - Electrical Engineering

Successful completion of course of study leading to graduation in electrical engineering was found to be linked to a couple of key gateway courses. Students that performed below a threshold in these early courses had a lower probability of graduating and could then be identified for additional assistance. Based on these results, changes were implemented in the curriculum to enhance student success in these preliminary courses to facilitate retention.

Parents’ Perspectives On A Smartwatch Intervention For Children With Adhd: Rapid Deployment And Feasibility Evaluation Of A Pilot Intervention To Support Distance Learning During Covid-19, Franceli L. Cibrian, Elissa Monteiro, Elizabeth Ankrah, Jesus A. Beltran, Arya Tavakoulnia, Sabrina E. B. Schuck, Gillian R. Hayes, Kimberley D. Lakes

Engineering Faculty Articles and Research

Distance learning in response to the COVID-19 pandemic presented tremendous challenges for many families. Parents were expected to support children’s learning, often while also working from home. Students with Attention Deficit Hyperactivity Disorder (ADHD) are at particularly high risk for setbacks due to difficulties with organization and increased risk of not participating in scheduled online learning. This paper explores how smartwatch technology, including timing notifications, can support children with ADHD during distance learning due to COVID-19. We implemented a 6-week pilot study of a Digital Health Intervention (DHI) with ten families. The DHI included a smartwatch and a smartphone. Google …

Designing Blended Experiences: Laugh Traders Design Fiction, Brian J. Okeefe

Frameless

The increasing ubiquity of interactions that involve complementary digital content, physical objects, and spaces, brings about new challenges for designers. There is a need to embed designs in legacy systems, whether those are existing physical structures or existing digital platforms. Traditional approaches to product design, interaction design, and user experience design often do not take this new context into account. Many systems do not consider how designers produce new digital and physical experiences that work harmoniously, while supporting new interactions and relationships with people (Imaz and Benyon 2007; Jetter, Geyer, Schwarz & Reiterer 2012). To address this, we propose the …

Afloat 2021: American Floating Offshore Wind Technical Summit, Advanced Structures And Composites Center

General University of Maine Publications

Email invitation to the "AFloat 2021: American Floating Offshore Wind Technical Summit" scheduled for September 8 and 9, 2021. Due to the emergence of COVID variants and the health risks they pose, a decision was made to hold the event virtually to ensure everyone's safety.

Advanced Organic Polymers For The Nanoscale Fabrication Of Fiber-Based Electronics Using The Electrospinning Technique, William Serrano Garcia

USF Tampa Graduate Theses and Dissertations

Electrospinning has become one of the most interesting techniques for fabricating nanofibers for multiple applications. The high surface-to-volume ratio nanofibers offer make the perfect structure for filters, sensors, and fiber-based electronics that could lead to a wide range of flexible electronics applications. This technique makes organic semiconducting polymers a promising alternative for single fiber electronics structures. Indeed, a wide variety of structures can be fabricated using electrostatic techniques for polymer manipulation from droplets, fibers, and coaxial structures. Although techniques such as electrospinning led the use of electrostatic forces to generate fibers of a precursor solution, electrospinning requires large enough polymer …

Development Of A Smart Grid Course In An Electrical Engineering Technology Program, Murat Kuzlu, Otilia Popescu, Vukica M. Jovanovic

Engineering Technology Faculty Publications

Electric power systems courses have been traditionally offered by electrical engineering technology programs for a long time, with the main objective to introduce students to the fundamental concepts in the field of electric power systems and electrical to mechanical energy conversion. A typical electric power systems course covers a variety of topics, such as general aspects of electric power system design, electric generators, components of transmission and distribution systems, power flow analysis, system operation, and performance measures. In the last decades, electric power systems have significantly modernized alongside with requirement of improvement in system efficiency, reliability, cybersecurity, and environmental sustainability. …

Senior Elective Communications Systems Courses As Pathways To Capstone Projects In Electrical Engineering Technology Program, Otilia Popescu, Murat Kuzlu

Engineering Technology Faculty Publications

In any engineering program the capstone project is the most comprehensive work completed by the students, and is regarded as the pinnacle of their engineering studies, with all their course work culminating with this major design, implementation and reporting product. Coming up with the actual topic of the project is sometimes the most difficult part of the project, especially in programs where the project topics are not solely proposed by the faculty, and they are for the student and advisor to develop together. This is especially the case of engineering technology programs, where a large percentage of students have work …

Real Work With Real Consequences: Enlisting Community Energy Engineering As An Approach To Envisioning Engineering In Context, Michelle E. Jordan, Steve Zuiker, Wendy Wakefield, Mia Delarosa

Journal of Pre-College Engineering Education Research (J-PEER)

This study describes an illustrative case study from a year-round program that positions middle and high school youth to explore the social value of energy systems in their homes, schools, and neighborhoods. Designed to center existing youth assets, interests and values, Community Energy Engineering (CEE) frames engineering as a tool that students can enlist in order to understand and interrogate their local socio-energy system while also acting to transform it. CEE partners with Title 1 schools in Latino/a neighborhoods in the U.S. southwest. CEE situates youth community-based solar energy innovation projects as consequential, evolving in and with historically contingent engineering …