Education Commons^™

Exploring The Impact Of Design Professionals On The Energy Retrofit Of Dwellings In Ireland: A Qualitative Methodology, Olivia Golden

Conference papers

A qualitative approach was taken to investigate the role of design professionals in the energy retrofit of external wall insulation to dwellings in Ireland. The research method combines document analysis with semi structured interviews. Document analysis is used to both inform the questions for the interviews and for validation. The SEAI One Stop Shop grant scheme and PAS 2035 framework were selected for detailed document analysis to gain an understanding of the context in which design professionals are working in Ireland and compare it to the energy retrofit framework in the United Kingdom. This was investigated by mapping the data …

An Investigation Into Ireland’S Bim Skills Gap, Guadalupe Centanni, Barry Mcauley

Conference Papers

The adoption of digital skills within the Irish AEC Sector has the potential to enhance efficiency and competitiveness among its stakeholders. Despite this opportunity, there is still a high demand for skilled BIM professionals, which cannot be currently met. To meet this skills demand and directly target future skills gaps within Ireland, several challenges must be addressed to facilitate broader BIM adoption. This paper focuses on addressing this gap by identifying steps to be followed to develop skilled professionals within BIM. This has been achieved by investigating the extent to which construction stakeholders in Ireland comprehend BIM and, examiningthe training …

Skills Matter – Up-Skilling Across Construction Stakeholders For Emerging Roles, Avril Behan, Paul Mccormack, Barry Mcauley

Conference Papers

The EU’s Climate Target Plan To 2030 (European Union 2020b) of achieving at least 55% reduction in Green House Gas emissions from 1990 levels, delivering towards a climate-neutral economy by 2050, requires systems-level change in the way we design, construct, and operate our built assets. Funding initiatives, such as co-ordinated by BUILD UP Skills, aim to deliver upskilling to the market but targets set by the European Skills Agenda may not be reached at current achievement levels. This paper presents the results of one completed and the progress of one ongoing Horizon 2020 funded project, BIMcert and ARISE, respectively. Learning …

A Comparative Study On The Design Typology Of Dense, High-Rise Housing, Nikita Mansinghani

Honors Theses

The three case studies are multi-unit residential buildings located in three vastly different European cities and designed in different times periods of architectural transformations and technology help us understand the value and development of these units and the significance of them in the future design typologies. The understanding of housing complex has been occupied with the exercise of control as a design tool for demarcating variation to further the purpose of housing and shift in approaches from typical architecture to non-standard creative practices, this article focuses on three precedents: the Unite de habitation, VM houses and The Whale. The three …

Lessons From The Classroom – Assessing The Work Of Postgraduate Students To Support Better Hygrothermal Risk Assessment, Joseph Little, Beñat Arregi, Christian Bludau

Conference papers

The widespread adoption of transient simulation modelling tools by building design professionals to support hygrothermal risk assessment of building design specifications is a crucial component in a multi-pronged drive to reduce moisture risk in buildings. Structured upskilling is essential. Much can be learnt about the ways practitioners use such tools by reviewing the work of professional postgraduate student groups. Such review could inform the creation of a user protocol. Peer-review under the responsibility of the organizing committee of the ICMB21.

A Vernacular For Lincoln, Nebraska, Austin Riggins

Honors Theses

The contemporary vernacular architecture in the United States is a product of industrialization and globalization. One homogenous, mass produced vernacular has dominated nationwide and overshadowed the unique, contextual, and regional designs of the past. While the contemporary, industrialized vernacular has led to increases in the quality of life for many in the developed world, it has also left in its wake a homogenous and placeless environment devoid of environmental sensitivity or cultural references. There is a need for a set of new vernaculars that embrace modern building technologies while simultaneously responding more directly to local climatic needs and facilitating a …

A Hermeneutic Phenomenological Study Into The Impact Of Bim On The Social Dynamics Of The Aec Professional In The Workplace., Malachy Mathews Dr.

Doctoral

A review of the literature published surrounding new digital design and construction technologies and associated processes described within the Architecture, Engineering, and Construction (AEC) community as Building Information Modelling (BIM) or Virtual Design and Construction (VDC) reveals a gap in the theoretical understanding of the impact these technologies are having on professionals who work in this industry. The central aim of this research is to discover if there has been a shift in social dynamics as a result of the adoption of BIM in the workplace and, if there has been, to discuss the meaning of this for the industry …

Ua3/2/3 President's Office-Garrett Building File, Wku Archives

WKU Archives Collection Inventories

Artificial collection related to the construction of Cherry Hall and the Kentucky Building using Works Progress Administration funds.

Virtual Reality As A Pedagogical Tool To Design For Social Impact: A Design Case, Tiffany Roman, Jon Racek

Faculty and Research Publications

Three-dimensional (3-D) virtual environments have key affordances that can improve learning, particularly when context, culture, and pedagogical aims are aligned to a given learning situation. One challenge in detailing effective uses of 3-D virtual environments in teaching and learning contexts is that the design judgments involved are not always made explicit. We argue that the transparency of design judgments, as it relates to the use of 3-D virtual environments, are critically important. This article advances scholarship of emerging technologies by detailing the design judgments of a university instructor within a Design for Social Impact cross-disciplinary course. To address learner needs …

Emerging Cad And Bim Trends In The Aec Education: An Analysis From Students' Perspective, Gulbin Ozcan Deniz

College of Architecture and the Built Environment Faculty Papers

As the construction industry is moving towards collaborative design and construction practices globally, training the architecture, engineering, and construction (AEC) students professionally related to CAD and BIM became a necessity rather than an option. The advancement in the industry has led to collaborative modelling environments, such as building information modelling (BIM), as an alternative to computer-aided design (CAD) drafting. Educators have shown interest in integrating BIM into the AEC curriculum, where teaching CAD and BIM simultaneously became a challenge due to the differences of two systems. One of the major challenges was to find the appropriate teaching techniques, as educators …

Linking Geospatial Engineering Into Collaborative Multidisciplinary Bim Projects - An Educational Perspective, Avril Behan, Helen Murray, Jonathan Argue, Ronan Hogan, Audrey Martin, Pat O'Sullivan, Robert Moore, Malachy Mathews

Conference papers

This paper describes the background to and execution of a postgraduate project undertaken by students on DIT's MSc in Geospatial Engineering (GeoEng) in support of a project on level 2 BIM being undertaken by students on the MSc in applied Building Information Modelling & Management (aBIMM) around the retrofit of and new build extension to the Grangegorman Clock Tower Building. In support of this requirement, an external and internal survey of the existing structure and its surrounding topography was required. The aBIMM students and staff acted as the Design Team who subcontracted the Geo Eng group who were organised into …

Analog:Digital, The Digital Spine: A 1 X 1 Strategy For Integrating Digital Tools In Foundation Design Studios, Ting Chin, Claudia E. Hernandez Feiks

Publications and Research

Architectural education today needs to foster the inherent conceptual and creative thought processes the profession demands but also knowledge of all of the tools that allow architects to create and produce their work. Over the last 25 years the number of digital tools used in the practice of architecture has increased exponentially. Incorporating these digital tools, together with analog ones still being taught in most undergraduate programs today, is overstretching already overloaded architectural curricula. This leaves us to consider how we maintain the quality of teaching as the quantity of content increases and the amount of time with students remains …

Bim; Postgraduate Multidisciplinary Collaborative Education, Malachy Mathews

Conference papers

BIM Technologies and Process are steadily increasing in the design and construction industry. The amount of undergraduate courses delivering BIM based applied and theory courses is also on the rise. These students will be entering a job market where their skillsets in digital modelling and collaborative practice will be in demand. However, existing AEC (architectural, engineering, construction) professionals are recognising the changes happening in the industry. Each domain is influenced and challenged by BIM. The traditional process and workflows will change as BIM adoption grows. Tobin [1] states the long-term impact of any innovation is often not understood when it …

Umass Amherst Campus Master Plan Sustainability Chapter, Ludmilla Pavlova-Gillham, Nariman Mostafavi, Mohamad Farzinmoghadam, Kylie A. Landrey, Somayeh Tabatabaee Pozveh, Ezra Small, Ted Mendoza, Jason J. Burbank, Robert Ryan, Dennis Swinford, Niels La Cour, Alexander Stepanov

Campus Planning Master Plans

The UMass Amherst Campus Master Plan Sustainability Chapter articulates the manner in which the Campus Master Plan 2012 principles translate into specific recommendations for campus systems development in support of future smart growth. It summarizes the current physical campus-scale planning projects that Facilities & Campus Services have completed during and after the Master Plan process, and incorporates other operational and educational initiatives that have engaged our campus community as we plan for sustainability.

The CMP Chapter is organized in three major sections: i) sustainability overview; ii) campus master plan systems; iii) current initiatives; and iv) next steps. The first section …

The Relationship Between Designing And Making, And Creative Design Processes That Could Be Used In Second Level Education., John Walsh

Presentations

This presentation was made at the TechnoTeachers Conference 2013. The Technology Teachers Association represents teachers of subjects including Technology, Materials Technology Wood, Technical Graphics, Design & Communication Graphics and Construction Studies. Despite having limited training in Design, these teachers have become the main providers of Design education at second level. This presentation looked at the importance of design to industry, society and beyond. Design in Ireland in general and in particular, how Design is taught in second level education. It considers in brief some methodologies that may be used in the teaching of design in this context. Ultimately, the aim …

Bim Collaboration In Student Architectural Technologist Learning, Malachy Mathews

Articles

This paper is the result of a qualitative case study which investigated the influence of building information modelling (BIM) collaboration on the learning of student architectural technologists based around a studio group project. The purpose of the paper is to disseminate knowledge gained into a new learning environment facilitated by the collaborative properties of a BIM application. A qualitative case study approach has been used to undertake the examination of the learners’ experiences during the project. This approach allowed the author to map the complex interaction between the participants during the stages of the collaborative design project. The paper provides …

Sensitivity Studies Of A Low Temperature Low Approach Direct Cooling Tower For Building Radiant Cooling Systems, Medhi Nasrabadi, Donal Finn, Ben Costelloe

Conference Papers

Recent interest in cooling towers as a mechanism for producing chilled water, together with the evolution of radiant cooling, have prompted a review of evaporative cooling in temperate maritime climates. The thermal efficiency of such systems is a key parameter, as a measure of the degree to which the system has succeeded in exploiting the cooling potential of the ambient air. The feasibility of this concept depends largely however, on achieving low approach water temperatures within an appropriate cooling tower, at acceptable levels of energy performance. Previous experimental work for a full scale evaporative cooling system has shown that it …

Mathematical Modelling Of A Low Approach Evaporative Cooling Process For Space Cooling In Buildings, Medhi Nasrabadi, Donal Finn, Ben Costelloe

Conference Papers

This paper describes a mathematical model of a low approach open evaporative cooling tower for the production of high temperature indirect cooling water (14-16°C) for use in building radiant cooling and displacement ventilation systems. There are several potential approaches to model evaporative cooling, including: the Poppe method, the Merkel method and the effectiveness-NTU (ε-NTU) method. A common assumption, applied to the Merkel and ε-NTU methods, is that the effect of change in tower water mass flow rate due to evaporation is ignored, which results in a simpler model with reduced computational requirements, but with somewhat decreasedaccuracy. In this paper, a …

Thermal Performance Of Low Approach Evaporative Cooling Systems In Buildings, Ben Costelloe, Donal Finn

Conference Papers

Meteorological enthalpy analysis of temperate and maritime climates above 45˚N suggests that the water-side evaporative cooling technique has considerable unrealised potential with contemporary "high temperature" building cooling systems - such as chilled ceilings. As low approach conditions are the key to exploiting the cooling potential of the ambient air, thermal performance at such conditions needs to be investigated. To address the research issues a test rig, based on an open cooling tower and plate heat exchanger and designed to maximise evaporative cooling potential, has been constructed at DIT. A combination of experimental measurement and analysis is used in the investigations. …

Thermal Efficiency Characteristics Of Indirect Evaporative Cooling Systems, Ben Costelloe, Donal Finn

Conference Papers

Recent developments in enhancing heat transfer in cooling towers, together with the success of chilled ceilings, have prompted a review of the evaporative cooling technique. in temperate maritime climates. The thermal efficiency of such systems is a key parameter, as a measure of the degree to which the system has succeeded in exploiting the cooling potential of the ambient air. This paper presents the results of experimental research into the thermal efficiency of a water-side open indirect evaporative cooling test rig designed to achieve low (1-4 K) approach conditions. Secondary efficiencies in the range 0.24-0.76 have been achieved.

Earth Sheltered Housing In Warren County, Kentucky: Description Of Housing Units & Determinants Of Residents' Satisfaction, Peggy Wallace

Masters Theses & Specialist Projects

The known population of earth sheltered houses in Warren County, Kentucky were studied (a) to document building materials and techniques utilized, (b) to describe the residents demographically and document their attitudes regarding satisfaction with earth sheltered housing, and (c) to determine reasons for building and resources utilized in financing and planning, as well as problems encountered in regard to the earth sheltered house.

Data on 21 housing units were collected through personal interviews. Data analysis was accomplished using contingency tables, chi-squares, Pearson's product-moment correlation, and multiple stepwise regression.

The earth sheltered house found to provide residents with high satisfaction was …