Business Administration, Management, and Operations Commons^™

A Maintenance Program Guide For The Non-Technical Building Manager, Luis M. Tavares

Theses

For the most part, the title of Building Manager is conferred upon an individual who is given the responsibility of services support for a facility. However, this title many times is carried by men/women who are responsible not only for the upkeep of the general building, janitorial, and food services but also for the safekeeping of the building equipment, such as mechanical and electrical machinery. At times, these individuals may be involved with general service responsibilities and tend to lose sight of maintenance needs.

In order for the Building Manager to implement maintenance successfully, he/she must understand the close cooperative …

A Global Resource Allocation Model For An Electrical Utility, Pantelis G. Tinios

Theses

The management of the electric utility company, as the management of any other company, has to make important decisions which will have a direct impact on the company's future operations.

In this study, a global model was devised which enables the management to make more intelligent decisions related to the company's planning process.

The company's goals and subgoals are formulated, in a systematic way, into the mathematical model along with operational and financial constraints. Productivity growth, steady labor force, fuel availability, cash flow requirements, share rating, and coverage were some of the goals to be achieved. The goal programming technique …

Japanese Management Techniques And Its Transition To Taiwan, Shih-Tung Shu

Theses

Japan's success, as measured by a vertically increasing balance-of-payments surplus, has created serious issues between Japan and other industrial democracies. It has created fears about the economic superpower status of Japan. On the other hand, because of this very success in coping with worldwide economic problems and in sustaining its export drive, Japan's unique style of managenemt has attracted a great deal of attention. As the Japanese have begun to demonstrate on ability to transfer their management style to the U. S. and other western countries, Japanese management and its transferability continue to be a subject of special interest in …

Prefeasibility Study Of Flexible Manufacturing System, Patrice Gerault

Theses

Most major companies over the world are or intend to go into Flexible Manufacturing System. But, FMS is not as easy to implement as most cf the other equipments. It affects the whole company and careful studies must be done before parchasing it.

After a description of this new system, this paper reviews the effects introduced by FMS and the alements of savings or surcosts in comparison to conventional systems ; but no numerical evaluations are stated.

This paper gives a frame to any company which wants to undertake a prefeasibility study.

Integrating Cad/Cam Into Engineering And Manufacturing Organizations : A Management Perspective, Gerardo A. Navia

Theses

The potential productivity improvements possible with CAD/CAM systems will require all Engineering and Manufacturing Enterprises to acquire this technology in order to stay competitive. Experience to date has shown that integration of these computer-based systems into the on-going operations is difficult and will not yield the anticipated benefits unless this is done properly.

This thesis examines the integration problem and how it is being dealt with by reviewing the literature and through personal contacts with both CAD/CAM vendors and users. It was concluded that for successful adoption and integration, Managers need a strong background in both the technical and managerial …

Human Factors In Quality Assurance, Min C. Tzou

Theses

This thesis is concerned with the impact of human factors elements upon the efficiency and quality of output in a manufacturing environment. The subject was aproached through the current literature as it appeared in periodicals and papers. There were very few texts on the subject of human factors discipline, specially in the application of behavioral principles, which this thesis was mostly base on.

The first chapter of this thesis discusses the increasing role people play in product quality, and the changing attitudes of today's work force. The next six chapters are broken down into three parts. Chapter II and III …

Industrial And Commercial Energy Management, Frank L. Peraino

Theses

This thesis deals with energy and its management in the industrial and commercial segments of our society. It provides an insight into the development and evolution of the energy manager, as well as a projection of his role in the next decade. Through an analysis of energy sources, the utilization of energy in the industrial and commercial markets, and the development of energy conservation attitudes and technologies, this thesis provides an appreciation of the factors that have molded yesterday's energy coordinator into today's energy manager. By projecting this analysis, a snapshot of the characteristics and duties of tomorrow's energy manager …

Management Concept For Consumer Services Via Microprocessor Systems, Thomas William Bradshaw

Theses

With the proliferation of home computers and the subsequent ability to communicate with retail establishments, an opportunity exists for alternative delivery of goods and products to residential consumers. This paper explores the establishment, management, and problems associated with these burgeoning enterprizes.

Presently, there are several technologies and market strategies under devlopment which stress the convenience of making purchases. In addition to home computers there are other communication networks using different protocols such as videotext which consists of several arrangements of text and graphical protocols. In addition there are several mediums like cable and videotext by which product information can be …

A Systematic Program For The Management Of A Sanitation Function In The Food Industry, John Joseph Sprainitis

Theses

The sanitation of food processing and packaging facilities is a labor intensive activity. As with any labor intensive operation, effective planning and control of the manpower is necessary. The more effective tie management, the more effective and productive the manpower will be.

As the effectiveness of the management improves, the cost effectiveness of the manpower will improve.

In dealing with the manufacturing of foods, there are numerous government regulations, of which sanitation plays a key role. Misunderstanding the impact of these regulations, and either over- or under-reacting to them, can result in unnecessary costs or severe problems.

In order to …

Management Improvement Study Of The Engineering Function In A Converting Industry Company, James John Slovak

Theses

A study was made to determine if the profitability of a converting company could be improved by expanding its engineering department. Process challenges were examined along with the present engineering function to determine difficulties. A case study of capital budget projects completed in the last three years revealed that potential savings were lost due to late and incomplete projects. The conclusion is that profitability can De increased through process control improvements and more timely completion of capital projects by expanding the present engineering department.

Implementing A Preventive Maintenance Program In A Pharmaceutical Manufacturing Plant, Daniel J. Shatynski

Theses

The goal of Preventive Maintenance is to reduce operating costs through greater equipment availability and lower downtime costs. Its intention is also to reduce the frequency and severity of corrective maintenance. A case study of a chemical manufacturing plant in the pharmaceutical industry is reviewer and symptoms are illustrated for purposes of definition. The development and implementation of a Preventive Maintenance program for this chemical manufacturing plant is proposed.

Implementation Of Dbase Ii In Inventory Management By A Small Firm, Shih-Chieh Wang

Theses

No abstract provided.

Impatience To Response Time, Robert James Rovi

Theses

The concept of waiting patiently and impatiently is examined and a model is proposed which is helpful in explaining Increases in the levels of impatience. A survey of people working in the computer field was taken so that a measure of the time within which the average person becomes impatient for a variety of computer operations could be determined. These answers were then compared with the results of a survey taken in 1968. Results show that there was no significant difference between these two groups even though the survey taken in 1968 was expected to show longer expected response times …

A Study Of Worker Motivation, Farid Uddin Ahmad

Theses

This thesis mainly deals with the motivation of the production managers, engineers, technicians and production workers. The purpose is to emphasize the need for providing due motivations to an important work group of the industry who are largely ignored. An attempt has been made to amply demonstrate the various techniques for worker motivation. As the study of standard motivational theories alone cannot solve the complex motivational problems, all possible efforts have been made to relate, integrate and blend the theories with actual applications in the organizations. All the relevant and important issues connected with worker motivation have been highlighted. Points …

Successful Management Techniques For Introduction Of Computerized Systems In A Production Facility, Michael James Boyle

Theses

This thesis surveys the potential for introducing significant organizational change into a manufacturing environment which is undergoing large scale capital improvement.

The first portion describes both the organizational and technological barriers present at a specific manufacturing facility. The capabilities of a computer based process control system are detailed along with its ability to fulfill the employer's particular business needs.

The next portion details the work necessary to train both management and production operators, not only on how to use this computer based equipment, but also how they themselves must change their personal modes of thinking in order to carry out …

Risk Assessment For New Products In Office Automation, Dolores Ann Canale

Theses

As investors survey the industrial growth of technology for the late 1980's one area leading the range for large potential growth is the area of office automation. Though this area has been under heavy speculation by many large firms (such as IBM, AT&T and EXXON) for the pass ten years it still remains an unexplored market for many investors. The objective of this research paper is to study the risks companies. will face developing products for this horizon.

Investors believe that success in this area, as well as, many other areas of engineering rely in large measure on the willingness …

An Analysis Of Costs In Welding, Shashank Gangadhar

Theses

The investment making decision for welding machinery or the selection of an economic welding process is ccmplex due to the associated indirect expenses. For conventional evaluations certain cost elements can be disregarded since they are affected equally by competing alternatives. When considering welding equipment or calculating welding costs or selecting a welding process, the indirect costs assume a significant proportion and such factors must be carefully examined.

In this paper an attempt has been made to highlight the procedure for economic justification for welding machinery and the procedure for calculating the total weld costs. The calculation of such variables as, …

Computer Graphics In Pressworking Of Sheetmetal, Manisekaran Muthu

Theses

This thesis deals with how computer graphics can be applied to the pressworking of sheetmetal. Blanking, bending and cup drawing are the major pressworking operations. A computer graphics package was developed with the aid of the Tektronix 4051 computer. This package would help the designer of pressworking operations. All the programs were written in BASIC computer programming language.

The programs written for the stock layout display the various stock layouts for circular, rectangular, square, triangular shaped components or any irregular shaped component on the computer screen. Each stock layout displays important parameters such as material utilization percentage, width of stock …

An Inquiry Into Engineering Career Choice And Career Satisfaction, Gunars Bachs

Theses

The purpose of this thesis was to ascertain factors that motivate a person to study engineering, and to examine the aspects of engineering career satisfaction. This study was conducted as a survey by means of a mail questionnaire, which was distributed among graduates of New Jersey Institute of Technology. Another sample, comprised of master's degree recipients of NJIT who had received their bachelor's degree from other undergraduate schools, served as a control group.

Motivation factors and positive and negative aspects of the engineering career were established and ranked in order of their importance. A method to measure career satisfaction was …

The Role Of Multinational Corporations In The Transfer Of Management Technology To Nigeria, Liwhu Undiandeye

Dissertations and Theses @ UNI

The development of an active and viable managerial cadre in the developing nations is necessary for the initiation and sustainment of industrial growth and productivity. Management is not only able to recognize profitable opportunities but also possess sufficient entrepreneurial skills that can be organized for technological growth. Managerial skills are abundantly present in the West and significantly lacking in the developing nations. One of the ways to stimulate industrial growth in the developing nations is to transfer these abundant skills from the West. The transferability of western management technology to non-western cultures has been characterized by uncertainty as regards its …

Proposed Product Plan For A High Growth, High Technology Organization, Alan R. Eschbach

Theses

Analyzing and consequently redefining a corporation's product line or mix is an important task facing all manufacturing organizations. While this task is usually addressed in detail as part of an organization's business plan, it can be very disconcerting when an organization realizes that the markets and products that got them to where they are now will not necessarily be the ones that will give them the growth that they would like to realize. Redefining the product line can be even more critical to young, high technology organizations who have never done it before and have found themselves facing the possibility …

An Assessment Of Job Attitudes Held By Hourly Workers At A Food Processing Plant, Charles J. Sheahan

Theses

This study applied Vroom's instrumentality-valence model to an assessment of the overall job attitude of hourly workers at a food processing plant. The specific job factors relating to the formation of overall job attitude are described and the managerial implications of the results are discussed. A short discussion of the relationship of these employees' attitudes to Herzberg's motivation-hygiene theory is also presented.

The results of the study indicate a moderate degree of job satisfaction based on Vroom's model. Additionally, the correlations of specific instrumentality to specific valence give a strong indication that the subjects value rewards they perceive as attainable, …

The Operational Utility Of The Walton-Mckersie Attitudinal Structuring Model In Collective Bargaining, Donald Warren

Theses

This work is an heuristic inquiry into behavioral change theory designed for application to labor/management interaction in collective bargaining. The theory itself was postulated by Richard E. Walton and Robert B. McKersie in their book A Behavioral Theory Of Labor Negotiations. The principles of their theory are highly axiomatic and their importance and validity can only be recognized through applied empirical analyses that demonstrate or refute its concept.

The aspect of the theory which is the focal point of this research pertains to the structuring and restructuring of attitudes and attendant relationships resulting from the collective bargaining process. The objective …

Forecasting Construction Product Demand, Robert Singerline

Theses

This is a synopsis of practical and theoretical methods used in forecasting construction product manufacturers' product demand. The practical methodology was accumulated by the author while working as a consultant for the Dodge Construction Information Division of McGraw-Hill. The objective is to review and update the various methods of forecasting with illustrations of current practices that are being used to forecast building product demand. The resulting work will help management in the planning process.

Designing Cost Effective Pump Suction Systems Using Statistical Correlation Techniques To Estimate Vessel Elevation Costs, Neil J. Bernstein

Theses

In order to minimize total costs (investment plus operating costs) when elevating process equipment to meet hydraulic requirements, it is essential to establish cost effective and energy efficient pump suction systems. During the early stages of design of such systems it is most critical that preliminary costs be determined in a timely manner to avoid job delays. One method of accomplishing this is through the use of a cost estimating relationship for defining the price behavior of alternative pump suction systems. This thesis describes the procedure used to develop a mathematical model to predict the cost of elevating vertical drums. …

Industrial Parameters For Applying New Technology, Michael Cimino

Theses

Industrial Parameters for Applying New Technology is a paper devoted to the study of the role 'of' robots in today's manufacturing environment. Industry looks forward to robotic technology to solve, its declining productivity dilemma. The purpose of this paper is to' aid a Prospective robot buyer in selecting the appropriate application and in particular a suitable robot for that application. A listing of robot performance characteristics, criteria chart, and evaluation table were developed to guide the engineer through the necessary steps required in selecting a successful robot application.

The history of robotics is discussed briefly along with an explanation of …

Design Criteria For Employee Alcholism Programs, Lee G. Conover

Theses

This thesis is an examination and evaluation of treating employee alcohol-related problems through a counseling program. Special attention has been given to the many aspects that must be considered for the implementation of a successful counseling program.

To gather the data for this thesis, a successful counseling program was observed and members of its counseling program staff, medical, labor relations, and personnel departments, along with its union representatives, were interviewed in order to draw on their experience and expertise in organizing, implementing and maintaining such a counseling program. A counseling program consultant, a representative of the New Jersey Department of …

Selection And Problems Faced By The Handicapped In An Industry, Hemank Babulal Dharia

Theses

This thesis reports on the problems faced by handicapped workers placed in an industrial situation. It discusses some of the frustrations, aspirations and hopes of the disabled to find suitable work as well as the fears and misconceptions of employers who consider the employment of the handicapped.

There is discussed the work done by the author in designing jigs and fixtures to assist handicapped workers in production as well as the models of placement, job understanding and rehabilitation efforts.

The work was done at the Delaware County Branch of the Pennsylvania Association for the Blind, Chester, Pennsylvania where the author …

Managing And Controlling The Manufacturing Operations, Harish Doshi

Theses

No abstract provided.

Management Of The Interface Between Product Design And Production, Adam Fischer

Theses

The goal of this thesis was to identify some of the many obstacles which tend to, in some way or manner, delay the timely, satisfactory progression of new developments from becoming new profit items. These obstacles which are numerous are the results of personal observation plus research of many books and periodicals. The identification of the obstacles will hopefully result in their obviation. Notable accomplishments along these lines tend to:

1. Reduce the loss of opportunity to gain an appreciable market share.

2. Reduce investment/overhead cost by earlier recovery of cost through earlier marketing effort.

3. Reduce continuing engineering costs …