Business Commons^™

Review Of Factors Impacting Cost Benefit Analysis (Cba) For Implementing Improvements To The Air Force Technical Order System, Susan J. Bergin, Terry A. Parsons

Theses and Dissertations

This research focused on developing a Cost Benefit Analysis process for Program Managers to implement when deciding what technical order format-- paper, computerized or automated--to purchase. Factors which determined the outcome are costs life cycle cost considering technical order format qualitative issues characteristics which are benefits of a technical order format and system responsiveness time required to develop or modify a technical order in each format. A literature review revealed problems with the paper technical order format, management infrastructure, quantitative cost estimates for different formats, and different techniques which could be used for a cost benefit analysis. Structured interviews were …

An Analysis Of The Effect Of Personnel Drawdown Initiatives On Aircrew Experience, Keith L. Hedgepeth, Lennie J. Simpson

Theses and Dissertations

This study analyzes the effects of personnel reduction initiatives on aircrew experience levels of Air Force pilots and navigators. Four key measures of experience were defined, including total flight hours, flying hours in Primary Assigned Aircraft PAA, total hours at time of upgrade to instructor, and total PAA hours at time of upgrade to instructor. Three objectives were established for this study. These objectives measured the degree of change in overall aircrew experience for pilots and navigators in six major weapon systems, to determine if changes in aircrew experience varied by weapon system, and if changes in aircrew experience varied …

Quality Improvement Analysis Of The Air Force Aircraft Maintenance And Munitions Officers Course, Jeffrey T. Acred, James R. Witter

Theses and Dissertations

Previous research concerning aircraft maintenance officer training focused on the content of the training curriculum of the Aircraft Maintenance and Munitions Officers Course AMMOC. Conversely, this study sought improvement in aircraft maintenance officer training by evaluating the guidance and support provided to AMMOC. Two methods were employed for identifying such opportunities. First, a descriptive model of the training system supporting AMMOC was developed and analyzed. Second, feedback was solicited from AMMOC instructors through the use of a two-round Delphi. The Delphi was employed to develop a consensus among the instructors regarding what improvement opportunities existed and potential means for taking …

Developing A Template For Logistics Test And Evaluation, Timothy J. Fennell, Jason S. Mogle

Theses and Dissertations

Logistics test and evaluation, performed during the developmental test and evaluation effort, is an integral part of the aircraft acquisition process. However, there has been no standard approach to conducting logistics test and evaluation. This study researched past and present approaches to aircraft logistics test and evaluation to determine the most effective method for future programs. We conducted this study using the Delphi method. We solicited the expert opinions of 32 individuals from the logistics test and evaluation field using two rounds of questions. We then statistically analyzed the data to ultimately develop a logistics test and evaluation template. We …

Benchmarking Customer Service Practices Of Air Cargo Carriers: A Case Study Approach, Patrick D. Lozon, Michael B. Mcdaniel

Theses and Dissertations

This study used the benchmarking process incorporated in a case study approach to determine what the Air Force could learn from the commercial air cargo carriers in regard to customer service practices. The air cargo industry leaders were determined through a previous study to be United Parcel Service, Federal Express, Emery Air Freight, Airborne Freight, DHL Airways, and Burlington Air Express. In addition, the 437th Aerial Port Squadron APS at Charleston AFB South Carolina was the Air Force representative in the benchmarking study. Interviews with air cargo managers were conducted at each carrier’s main hub and at Charleston AFB. The …

Santa Clara Magazine, Volume 36 Number 3, Summer 1994, Santa Clara University

Santa Clara Magazine

7 - JAMAICA: THE OTHER SIDE OF PARADISE Religious organizations work to relieve the misery in a nation that, for some, is a vacation wonderland. By Mitch Finley '73 Political and economic analysis by Dennis R. Gordon

12 - I'll SEE YOU IN ADR! More and more people with civil disputes are finding themselves in alternative dispute resolution. But is ADR always the consumer's best choice? By Julie Sly '82

20 - UP CLOSE: MARIO BELOTTI The SCU economics professor of 35 years has become internationally renowned through hard work and (he says) being in the right place at the …

Automated Manpower Rostering: Techniques And Experience, C. M. Khoong, Hoong Chuin Lau, L. W. Chew

Research Collection School Of Computing and Information Systems

We present ROMAN, a comprehensive, generic manpower rostering toolkit that successfully handles a wide spectrum of work policies found in service organizations. We review the use of various techniques and methodologies in the toolkit that contribute to its robustness and efficiency, and relate experience gained in addressing manpower rostering problems in industry.

Running With The Pack: Jit & Automation For Small Manufacturers, Thomas E. Phillips, John R. Ledgerwood

Publications

While both just in time (JIT) concepts and automation programs have been widely implemented and highly successful in large manufacturing companies, many smaller manufacturing companies have wondered whether it would be economically feasible to utilize these same techniques and derive these same benefits. When JIT is adopted by small manufacturers, it provides them with advantages over traditional manufacturing systems, such as lower cost, quality improvements, higher productivity, and less working capital tied up in inventory. Small US manufacturers must understand the basic principles and philosophy of JIT and update their production equipment if they are to be competitive in today's …

Santa Clara Magazine, Volume 36 Number 2, Spring 1994, Santa Clara University

Santa Clara Magazine

8 - SACRED MIX A mystical marriage of indigenous culture and Christianity, El Santuario de Chimay6, the most popular pilgrimage site in the United States, has an inexplicable pull. By Martin L. Cook

11 - UP CLOSE: CARROLL WILLIAMS SCU's athletic director discusses his plans and hopes for the future of Santa Clara's sports program. Interview by Jim Young

16 - AS INDIVIDUALS AND AS ONE Working as a community of individuals toward a shared vision, we will create the great Catholic, Jesuit university of our dreams. By Paul Locatelli, S.J.

20 - PUTTING DIVERSITY TO WORK With one of …

Technology Transfer: A View From The Trenches, Harvey Drucker

RISK: Health, Safety & Environment (1990-2002)

Dr. Drucker, who has lab-wide responsibility for technology transfer at Argonne National Laboratory, argues that transferring rights in discoveries made through tax supported research to private entities can contribute to public welfare in many ways.

A Heuristic Approach To Determining Cargo Flow And Scheduling For Air Mobility Command's Channel Cargo System, John Fitzsimmons Jr., John Walker

Theses and Dissertations

This research investigated a heuristic approach to schedule aircraft for the channel cargo system of the Unit States Air Forces Air Mobility Command AMC. Given cargo frequency of visit requirements, a fleet of aircraft, and possible routes, the objective of this research was to develop, implement, and test an iterative procedure to efficiently schedule and load aircraft in order to maximize the flow of cargo through the channel cargo system. Once a level of flow was established, attempts were made to minimize cost in terms of cumulative weighted time-in-system CWTIS. A minimum cost flow heuristic, incorporating a successive shortest path …

Overview Of Federal Technology Transfer, Lawrence Rudolph

RISK: Health, Safety & Environment (1990-2002)

Mr. Rudolph reviews approximately thirteen years of legal and political developments that have contributed to laws governing the extent to which private firms may secure rights in technology at least partly developed with federal funds.

An Analysis Of Air Force Acquisition Engineering Officer's Perceptions Of The Adequacy Of Their Preparation For Management, Steven E. Woodruff

Theses and Dissertations

The purpose of this study was to determine how much time Air Force acquisition engineers spend in performing management functions, how those engineers spend in performing management functions, how those engineers perceive their management training, and which types of training contribute the most to managerial competency. The results from surveys of 215 acquisition engineers assigned to ASCEN, Wright-Patterson AFB, OH and their supervisors revealed that engineers do indeed spend substantial amounts of time performing management functions. Slightly more than half the engineers reported spending at least 50 of an average workday performing management functions. Over 53 of engineers responding to …

Fuzzy Knowledge-Based Approach To Treating Uncertainty In Inventory Control, Dobrilla Petrovic, Edward Sweeney

Articles

Inventory control in complex manufacturing environments encounters various sources of uncertainity and imprecision. This paper presents one fuzzy knowledge-based approach to solving the problem of order quantity determination, in the presence of uncertain demand, lead time and actual inventory level. Uncertain data are represented by fuzzy numbers, and vaguely defined relations between them are modeled by fuzzy if-then rules. The proposed representation and inference mechanism are verified using a large numbers of examples. The results of three representative cases are summarized. Finally a comparison between the developed fuzzy knowledge-based and traditional, probabilistic approaches is discussed.

Using Statistics In Industry - Quality Improvement Through Total Process Control, Edward Sweeney, Gordon Betteley, Neville Mettrick, David Wilson

Books/Book chapters

No abstract provided.

University Of Texas At Tyler Catalog, 1994-1996, University Of Texas At Tyler

Catalogs

Archives Space instance: https://archivesspace.uttyler.edu/repositories/2/archival_objects/22365

The Characteristics Of Motion And Time Study In Taiwan's Electronics Industry And Their Relationship To Business Size, Betty Chang

Dissertations and Theses @ UNI

This research was conducted to investigate the characteristics of motion and time study implementation in Taiwan's electronics industry, as perceived by industrial engineers, and the relationships of these perceptions to business sizes of the firms. The questionnaires were mailed to 252 industrial engineers in the general firms group. A total of 206 (81.75%) instruments were returned. The questionnaires were then mailed to another 15 industrial engineers in the highly productive firms group. All the instruments (100%) were returned from the highly productive firm group. Telephone interviews were later conducted with six selected highly productive electronics firms to investigate their successful …

A Feasibility Study Of A Private Entity Competing With Fbos For Airline Ground Handling Contracts, Carlos A. Vergas

Master's Theses - Daytona Beach

This thesis investigates whether a private entity can compete with fixed base operators (FBOs) for airline ground handling contracts. Separating the research method into five phases, the author first conducts a need analysis. Then, the author dissects the structure of existing ground handling contracts. Thirdly, the average service charges presently in place are tabulated. Fourthly, a financial analysis is performed including the calculation of the break-even point at a profit. Finally, a model of ground handling operation is simulated using an existing air carrier’s ground handling contract.

Demonstration Of Improved Software Support Labor Estimation For Air Force Operational Flight Programs Through Functional Orientation, Ronald R. Warner Jr., Darrel L. Wright

Theses and Dissertations

This study demonstrated two approaches to improve current software support effort estimation models for aircraft software. Both approaches involved a functional orientation not used by existing models. The first approach demonstrated how to orient a model to reflect the block change cycle modification process and how to represent support effort changes over time in order to improve effort estimation accuracy. Current software models do not reflect the support environment or the temporal characteristics of aircraft software support. The second approach demonstrated how to calibrate a model by properly selecting source data in order to increase accuracy. Support calibration is not …

Measuring User Satisfaction Of The Electronic Mail System At Air Force Materiel Command Headquarters As An Indicator Of The System's Effectiveness, Randall R. Bradford

Theses and Dissertations

The purpose of this study was to evaluate the effectiveness of the electronic mail system at the Air Force Materiel Command Headquarters. User satisfaction was measured as an indicator of the systems effectiveness. In order to provide an objective measurement of system effectiveness, the following research questions were addressed: (1) What is system effectiveness in relation to this particular electronic mail system, and how should it be measured? (2) What measurement instruments can be adapted, modified, or created to measure effectiveness as it is defined for problem? (3) If a measurement instrument is administered what do the results of the …

Santa Clara Magazine, Volume 36 Number 1, Fall 1993, Santa Clara University

Santa Clara Magazine

10 - DISCONNECTED A loss of continuity and connectedness could be the price we pay for this era of decentralized, customized technology. By Timothy J. Lukes

14 - STRETCHED TO THE LIMIT Private colleges scramble to control financial aid costs, and families struggle with too few aid dollars to go around. Here are the stories of four families who have worked in partnership with the University to make it through. By Elizabeth Fernandez '79, Overview by Elise Banducci '87

23 - THE MORAL LIFE In his recent encyclical, the pope speaks out on human nature, Christian boundaries, and universal truths. …

An Evaluation Of The Implementation Of Total Quality Management In A Service Organization, Charles Stanford Stevens

Engineering Management & Systems Engineering Theses & Dissertations

This research consists of a formative evaluation designed to identify the steps necessary to revitalize a formerly successful Total Quality Management (TQM) process at a U.S. Navy engineering and logistics support organization. The research also developed a methodology to account for the fact that the investigator is a well-informed insider who served as one of the principle change agents for the TQM implementation.

The research is based on the researcher's observation that the major cause for the waning implementation was due to senior management and leadership issues and the organization-wide processes with which they interface. The investigation consisted of an …

Proposal For A Dod Combined Battlefield Electromagnetic Environmental Effects (E3) Initiative, George H. Baker Iii

School of Integrated Sciences - Faculty Scholarship

The presentation emphasizes the growing importance of electromagnetic survivability and compatibility. Operation Desert Storm demonstrated the clear military advantage provided by sophisticated electronic weapon and communication systems. In addition, the offensive tactic of taking out the enemy's eyes and ears during the air war paid off, giving our military decisive air superiority. The lessons for the future are clear. High-tech electronics now so dominates the battlefield that the outcome of future conflicts could well be decided by electronics attrition rather than human casualties. Our Desert Storm experience thus accentuates the importance of guaranteeing that our electronic systems will not be …

Book Review, Suzanne B. Watson

RISK: Health, Safety & Environment (1990-2002)

Review of the book: HELENA SZEJNWALD BROWN, ET AL., CORPORATE ENVIRONMENTALISM IN A GLOBAL ECONOMY: SOCIETAL VALUES IN INTERNATIONAL TECHNOLOGY TRANSFER. (Quorum Books 1993) [264 pp.] Acknowledgments, bibliography, figures, index, tables. LC 92- 19851; ISBN: 0-89930-802-3. [$49.95. P.O. Box 5007, Westport CT 06881.]

Benchmarking Practices Of Air Cargo Carriers: A Case Study Approach, Mila D. Abalateo, Joni R. Lee

Theses and Dissertations

This research effort used the benchmarking process and a case study methodology to determine what the Air Force can learn from commercial air cargo carriers. A literature search showed that the U.S. air cargo industry leaders are United Parcel Service, Federal Express, Emery Air Freight, Airborne Freight, DHL Airways, and Burlington Air Express. In addition, the 436th Aerial Port Squadron at Dover AFB, Delaware was chosen as the Air Force representative in the benchmarking study. Observations of air cargo operations and interviews with operational managers or applicable experts familiar with air cargo operations were conducted at each carrier's hub and …

Benchmark Production Scheduling Problems For Job Shops With Interactive Constraints, Stewart W. James, Bruno A. Mediate Jr.

Theses and Dissertations

United States Air Force (USAF) depots have expressed interest in utilizing DISASTER production scheduling software to schedule their maintenance operations. DISASTER attempts to increase system throughput by building effective schedules for system, constraint resources. However, when a system contains multiple, interactive constraints, DISASTER builds the constraint schedules one at a time. Since each successive schedule must adhere to timing restrictions imposed by previous constraint schedules, the quality of the schedules produced by DISASTER is dependent upon the sequence in which the constraints are scheduled. This thesis first developed a set of benchmark problems which provide a diversity of scheduling scenarios. …

Scheduling A Medium-Sized Manufacturing Shop: A Simulation Study, Daniel J. Mcfeely

Theses and Dissertations

This study examined the application of simple-to-use, low cost scheduling methods to the operating environment of a medium-sized manufacturing shop. Computer simulation was used to evaluate eighteen different scheduling algorithms, each the result of the combination of a loading and a sequencing rule; due date setting was not considered since due dates are exogenously set. The loading rules investigated were Minimum Machine Required, Lowest Average WIP, and Lowest Average Aggregate Priority Level. The sequencing rules investigated were Priority, EDD, FIS, SPT, Slack, and Slack Ratio. The scheduling algorithms were evaluated against performance measures of mean tardiness, mean flowtime, mean percentage …

Software Cost Estimating Models: A Comparative Study Of What The Models Estimate, George A. Coggins, Roy C. Russell

Theses and Dissertations

This effort developed a consolidated document which highlights and examines differences in definitions, assumptions, and methodologies used by the REVIC, SASET, PRICES, and SEER-SEM cost models. The following research questions were investigated: (1) What differences exist between the cost models? (2) How do these differences impact the resulting estimates? (3) To what degree can we explain and adjust for known differences between the cost models? Seven specific areas were addressed: (1) software development phases, (2) development activities and cost elements, (3) source lines of code and language differences, (4) key model attributes and key cost drivers, (5) implications of Project …

Repair Process Improvement At The Ogden Air Logistics Center, Landing Gear Division: A Case Study In The Application Of The Theory Of Constraints, David A. Maddox, Susan L. Martz

Theses and Dissertations

This study explored the nature and extent of success that resulted from the implementation of the Theory of Constraints (TOC) in a depot repair environment. The actions taken to implement TOC were determined. Performance measures which defined success were identified and data were collected and summarized to demonstrate performance before and after implementation of TOC concepts. Improvements in flowdays and work-in-process (WIP) were determined to be attributable to the TOC effort. In addition, the unique characteristics of probabalistic repair and supply system variability were noted as those characteristics that posed the greatest challenges to implementing TOC in a remanufacturing environment. …

A Comparison Of The Disaster™ Scheduling Software With A Simultaneous Scheduling Algorithm For Minimizing Maximum Tardiness In Job Shops, Barak J. Carlson, Christopher A. Lettiere

Theses and Dissertations

The Theory of Constraints (TOC) is the foundation for a computerized scheduling system called DISASTER. Although this system has proven successful in many manufacturing settings, it has potential limitations due to the sequential heuristic process by which it schedules constraints. The objective of this thesis was to determine the extent to which these limitations impact the due date performance of schedules created by DISASTER. This objective was addressed by developing an algorithm to simultaneously schedule multiple constraints in a job shop environment and provide the optimal schedule for minimized maximum tardiness. This algorithm was used to obtain solutions for a …