Environmental Design Commons^™

Project Impact: A Case Study Of Developing A Manufactured Construction Workforce Through Contextualized Training, Arefeh Mohammadi, Kevin R. Grosskopf

Durham School of Architectural Engineering and Construction: Faculty Publications

With a looming shortage of skilled craft workers forecast to exceed 2 million by 2017, prefabrication may become a necessity for many U.S. contractors attempting to remain competitive with a smaller, lower-skilled workforce. Building components manufactured in a controlled, offsite environment have proven to reduce time, cost and site logistics while improving productivity, quality, safety and sustainability. However, entry-level workers, including more than 765,000 recession displaced manufacturing workers, often lack the basic skills necessary to retrain for jobs in manufactured construction. As a result, a $ 6.3M U.S. Department of Labor grant was awarded to an institutional consortium to develop …

A Case Study Of Upper-Room Uvgi In Densely-Occupied Elementary Classrooms By Real-Time Fluorescent Bioaerosol Measurements, Chunxiao Su, Josephine Lau, Fang Yu

Durham School of Architectural Engineering and Construction: Faculty Publications

Recently, the requirement to continuously collect bioaerosol samples using shorter response times has called for the use of real-time detection. The decreased cost of this technology makes it available for a wider application than military use, and makes it accessible to pharmaceutical and academic research. In this case study, real-time bioaerosol monitors (RBMs) were applied in elementary school classrooms—a densely occupied environment—along with upper-room ultraviolet germicidal irradiation (UVGI) devices. The classrooms were separated into a UVGI group and a non-UVGI control group. Fluorescent bioaerosol counts (FBCs) were monitored on 20 visiting days over a four-month period. The classroom with upper-room …

Social Sustainability Indicators In Mass Housing Construction, Ali Karji, Asregedew Woldesenbet, Mostafa Khanzadi

Durham School of Architectural Engineering and Construction: Faculty Publications

In the construction industry, buildings constitute more than half of the new construction built in the world. With the rapid growth of population in urban areas and high-energy consumption of buildings, considerable attention and efforts have been devoted to creating a sustainably built environment. As a result, various sustainable rating systems, principles and tools have been developed in recent years. This paper presents efforts underway for evaluation of sustainability in mass housing construction projects in the Middle East from a social aspect. The study reviews reports, guidelines and best practices at national and international levels to detect key sustainability indicators. …

Heat - Pump System With Refrigerant Charge Diagnostics, Fadi M. Alsaleem, Gregg H. Hemmelgarn

Durham School of Architectural Engineering and Construction: Faculty Publications

A heat-pump circuit may include an indoor heat exchanger, an outdoor heat exchanger, a compressor adapted to circulate a working fluid between the indoor and outdoor heat exchangers, and an expansion device disposed between the indoor and outdoor heat exchangers. A monitor for the heat-pump system may include a return-air temperature sensor, a supply-air temperature sensor, and a processor. The return-air temperature sensor may be adapted to measure a first air temperature of air upstream of the indoor heat exchanger. The supply-air temperature sensor may be adapted to measure a second air temperature of air down stream of the indoor …

Solar Urban Planning: Addressing Barriers And Conflicts Specific To Renewable Energy Policy And The Current Field And Practice Of Urban Planning Within The Context Of A Changing Climate, Toryl P. Hanna

Capstone Collection

The world is in a period of rapid urbanization while experiencing unprecedented rise in global temperature as a result of climate change. Questions have been raised as to how strategies for urbanization will be able to address the fetish for energy, while halting carbon emissions produced by traditional energy sources for urban inhabitants around the world. First, this paper seeks to look to cities, at the intersection of solar energy and the field of urban planning, looking into the opportunities and challenges that are currently surfacing. Conflicts and barriers in traditional urban land use patterns emerge as a topic of …

Adaptive Environments For Enabling Senior Citizens: An Holistic Assessment Tool For Housing Design And Iot-Based Technologies, Matteo Zallio, Damon Berry, Niccolò Casiddu

Conference papers

The population of older adults will continuously increase over the coming decades. As they get older, people will require assistance and regular monitoring, with higher costs for welfare system and families. Two vital aspects of a healthy lifestyle, are domestic autonomy and maintenance of relationships within the neighborhood. This leads to an interesting research issue: “Could houses and appliances have the potential to improve autonomy and quality of life of citizens? Which methods and tools could enhance wellbeing and healthy conditions? The house has the potential to be a safe, adaptive environment, integrated with technologies for life support. This work …

Touch Of Nature - Design Build, Katlyn Montague

ASA Multidisciplinary Research Symposium

Touch of Nature, an educational facility that’s goal is to enhance learning of the natural environment, hired our Architecture Building Technology class to design and build several educational kiosks located along the Rocky Ledges Trail. These kiosks included signage that will educate hikers on the environment around them.

Mechanical And Thermal Evaluation Of Different Types Of Pcm-Concrete Composite Panels, Dervilla Niall, Oliver Kinnane, Roger West, Sarah Mccormack

Conference papers

ABSTRACT: Thermal mass indicates the ability of a material to store and release heat and is a function of the heat storage capacity of a material. The thermal mass of construction materials can be used to reduce the energy required for heating and cooling buildings. The heat storage capacity of concrete can be increased by incorporating phase change materials (PCMs) into the concrete and hence providing additional latent heat storage capacity. Research was carried out to compare the thermal behaviour of two different types of PCM/concrete composite panels. The first type of panel was formed by adding microencapsulated paraffin to …

Lifelong Housing Design: User Feedback Evaluation Of Smart Objects And Accessible Houses For Healthy Ageing, Matteo Zallio, Niccolò Casiddu

Conference Papers

According to the latest research by the European Community and ISTAT (Italian National Institute of Statistics) surveys, Europe has the highest average age for its population. According to those data, in the near future, it could be necessary to move from a welfare model based on the centralization of care systems, to a system based on the distribution of certain healthcare facilities [1]. This means that the ageing population is ever increasing, thanks to better lifestyles, innovative medical care and wider access to different services. This work seeks to observe and analyse key implications of architectural and interior design features …

Structural Calculations For Nepal Vocational Learning Center, Nicholas Petrarca

Architectural Engineering

This project goal is to build a Leadership Vocational School for youth, women, differently abled, and local leaders of rural and Kathmandu Nepal. The client for this project is an organization called Sakcham Rural Nepal and they partnered with a humanitarian organization called Journeyman International to find Architecture and Architectural Engineering students to design a safe, attractive and functional building to fit their needs.

2115 Broad Mixed Use Site Development, Garrett Finkelstein, Peter Inman

Architectural Engineering

No abstract provided.

The Burning Building | Fire As Place, Winnie Tu

Architecture Senior Theses

The importance of fire in human social evolution is widely acknowledged but the extent of its impact is not fully explored. Generally, it is connected to energy, light, purification, illumination, creation, destruction and metamorphosis. Fire’s paradoxical nature has built up many societies throughout human history and has been the primary social driver within communities. Due to technological advances, its energy has been transformed into a distant element which is being used discretely in industrial buildings, hidden under basements, or replaced by other forms of energy. Now, heat, energy, and light is readily available anywhere at any time, eliminating the biological …

Two Lands, One System | Redefining The Border Crossing, Matthew Trulli

Architecture Senior Theses

The Israeli and Palestinian populations each have their own distinct infrastructural system, which operates independently and fails to connect the people in this region. This thesis contends that if a two-state solution is implemented under the guidelines of the 2003 Geneva Accord, new connections can stitch the populations of Israel and Palestine together through a reimagined border system.

These divisive infrastructural networks, which are a result of tense relationships, have also sparked increased violence throughout the region, particularly in Jerusalem. The French Hill, located north of the Old City in Jerusalem, is positioned at a critical point in the infrastructural …

The Seed | Urban Vertical Farming Germinated, Michael Lima

Architecture Senior Theses

A city works as an ecosystem in many ways. However, we currently do not live within that ecosystem, as the difference between an ecosystem and a city is the waste output and food input . Nature and society do not exist independently because there are no spaces of nature unaffected by man. With this in mind we need to reestablish our relationship with nature. Architecture and engineering can be used to create buildings that will allow humans to turn cities into ecosystems. This thesis argues that Urban Vertical Farms will produce social and economic hubs that will be a new …

Thermal Mass Behaviour Of Concrete Panels Incorporating Phase Change Materials, Dervilla Niall, Roger West, Sarah Mccormack, Oliver Kinnane

Conference papers

Phase Change Materials (PCM) have been incorporated into a range of building envelope materials with varied success. This study investigates two different methods of combining concrete and phase change materials to form PCM/concrete composite panels. The first method involves adding microencapsulated paraffin to fresh concrete during the mixing process. The second method involves vacuum impregnating butyl stearate into lightweight aggregate which is then included in the concrete mix design. The primary aim of the study is to determine which method is the most effective way to improve the thermal mass characteristics of a concrete panel in the context of a …

Development Of Coordination Control For Multiple Rooftop Units, Denchai Woradechjumroen, Haorong Li, Akekachai Deesiri

Durham School of Architectural Engineering and Construction: Faculty Publications

Rooftop Units (RTUs) have been widely applied in providing space heating and cooling for commercial buildings. In total, they serve over 60% of the commercial building floor space in the U.S. Even through the current control approaches of a RTU can maintain the zone temperature corresponding to a set point temperature, it performs inefficiently due to several factors such as limited sensing capability, non- coordinated local control, inherent oversizing effects and so on. In addition to unnecessary power consumptions, the current control and operation technology on RTUs also lead to the space humidity problem, equipment efficiency degradation, and premature failure. …

A Need For Evidence-Based And Multidisciplinary Research To Study The Effects Of The Interaction Of School Environmental Conditions On Student Achievement, Josephine Lau, Lily M. Wang, Clarence E. Waters, James A. Bovaird

Durham School of Architectural Engineering and Construction: Faculty Publications

With funding from the U.S. Environmental Protection Agency’s (EPA) Healthy Schools initiative, a research team from the University of Nebraska– Lincoln (UNL) is currently working on establishing how environmental conditions in K-12 school buildings impact student scholastic achievement. The objectives of the research project are: (1) to study comprehensively the impacts of a wide set of indoor environmental factors (including indoor air quality, thermal, lighting and acoustic conditions) on student achievement; (2) to investigate how these environmental conditions interact with each other to impact student achievement; (3) to rank order the environmental variables in terms of their relative impact on …

Fault Diagnosis Of Refrigerant Charge Based On Pca And Decision Tree For Variable Refrigerant Flow Systems, Jiangyan Liu, Huanxin Chen, Jiangyu Wang, Guannan Li, Haorong Li, Wenju Hu

Durham School of Architectural Engineering and Construction: Faculty Publications

Variable refrigerant flow (VRF) systems are easily subjected to performance degradation due to refrigerant leakage, mechanical failure or improper maintenance after years of operation. Ideal VRF systems should equip with fault detection and diagnosis (FDD) program to sustain its normal operation. This paper presents the fault diagnosis method for refrigerant charge faults of variable refrigerant flow (VRF) systems. It is developed based on the classification and regression tree (CART) algorithm. Data of the experimental VRF system is used to test the advantages of the CART method. Results show that the decision tree can achieve desirable diagnosis efficiency on undercharge faults, …

Cognitive Radio For Smart Grid With Security Considerations, Khaled Shuaib, Ezedin Barka, Nedaa Al Hussien, Mohammed Abdel-Hafez, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

In this paper, we investigate how Cognitive Radio as a means of communication can be utilized to serve a smart grid deployment end to end, from a home area network to power generation. We show how Cognitive Radio can be mapped to integrate the possible different communication networks within a smart grid large scale deployment. In addition, various applications in smart grid are defined and discussed showing how Cognitive Radio can be used to fulfill their communication requirements. Moreover, information security issues pertained to the use of Cognitive Radio in a smart grid environment at different levels and layers are …

A Prediction Method For Overall Economic Value Of Fault Detection And Diagnostic Tools For Rooftop And Split Systems, David Yuill, James Braun

Durham School of Architectural Engineering and Construction: Faculty Publications

Fault detection and diagnostics (FDD) tools for air-conditioning application may perform well or poorly, but it is difficult to characterize this performance in a meaningful way. Some recently proposed evaluation techniques have provided various statistics to characterize FDD performance, but these results can be difficult for a potential adopter of FDD to understand. A new method of characterizing FDD performance by predicting the overall economic value of the FDD tool is proposed in this paper. It is applicable to FDD tools intended for air-cooled unitary airconditioners, such as rooftop units (RTU) and split systems. The method gives an estimated dollar …

Normalized Effect Of Condenser Fouling And Refrigerant Charge On Performance Of Vapor Compression Air Conditioning Systems, Mehdi Mehrabi, David Yuill

Durham School of Architectural Engineering and Construction: Faculty Publications

Several laboratory experiments have studied the effect of faults on vapor compression cycle air-conditioning systems. There has been a particular focus on refrigerant charge variation, which is believed to be quite common in air conditioners, and a lesser focus on heat exchanger fouling. The majority of the published results evaluate the fault effects on particular system operating parameters in one unit. For example, the effect on capacity and efficiency are typically evaluated. The results differ from one study to the next. The current paper summarizes the effects for all of the results available in the literature for condenser fouling and …

Student Absenteeism And The Comparisons Of Two Sampling Procedures For Culturable Bioaerosol Measurement In Classrooms With And Without Upper Room Ultraviolet Germicidal Irradiation Devices, Chunxiao Su, Josephine Lau, Shawn G. Gibbs

Durham School of Architectural Engineering and Construction: Faculty Publications

Upper room ultraviolet germicidal irradiance (UVGI) has been shown to reduce the concentration of bioaerosols in controlled chambers. However, there is a lack of experimental results on the reduction of bioaerosol concentrations by UVGI devices in actual uncontrolled buildings. This study was carried out in an American elementary school in the Midwest. Two sampling procedures were carried out in six selected classrooms with similar dimensions that were separated into two groups: (1) UVGI exposure group and (2) non-UVGI control group. Two-stage Tisch culturable impactors were utilized to collect airborne culturable bacteria and fungi. Monthly samples were collected during unoccupied period …

Fault Detection And Diagnosis Process For Oversizing Design On Multiple Packaged Air-Conditioning Units, Denchai Woradechjumroen, Haorong Li, Thanapat Promwattanapakee

Durham School of Architectural Engineering and Construction: Faculty Publications

Heating, ventilation, air-conditioning and Refrigeration (HVAC&R) systems are seldom designed or commissioned properly. The situation leads to abrupt or degradation faults resulting in inefficient energy uses, excessive energy consumption and high service costs. To solve these aforementioned problems, fault detection and diagnosis (FDD) is utilized to firstly detect any abnormal conditions of a system and then diagnoses and determines their causes. In order to apply this concept in HVAC oversizing designs, this paper proposes the state-of-art procedure of a FDD procedure for analyzing the inherently faulty design (oversizing) of multiple packaged air-conditioning units used to supply cooling for an open …

Compressor Having A Control And Dagnostic Module, Hung M. Pham, Fadi M. Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

An apparatus includes a Voltage sensor, a current sensor, and a controller. The Voltage sensor measures Voltage values of alternating current power Supplied to a capacitor. The capaci tor is electrically coupled to a compressor. The current sensor measures current values of the alternating current power. The controller is configured to receive the Voltage values and the current values. The controller is configured to determine a first power factor value based on at least one of the voltage values and at least one of the current values. The controller is configured to selectively detect a first capacitor fault in response …

Designing A Resilient Building In The Coastal Zone, Don Kranbuehl, David Pryor

October 30, 2015: Beyond Toolkits: Adaptation Strategies and Lessons

No abstract provided.

Pigs Feet, Jesse W. Standlea

The Transdisciplinary STEAM+ Journal

My sculpture “Pigs Feet” has literal foundations upon casts of live pig’s feet. I locally sourced the pig’s feet before casting them. My sculpture makes use of a once cutting edge casting technology, alginate. Alginate molds were once the standard in dentistry. Alginate is an appealing casting material as it is refined from brown seaweeds, is both food and skin safe, it is suitable for educators, for artists and engineers alike.

After The Solar Decathlon: Creating A New Design-Build Program, Eric Weber

Architecture Faculty Presentations

The School of Architecture’s intent was to use the Solar Decathlon as a catalyst for creating a new Design Build program. The project allowed the School to leverage support into acquiring tools & equipment essential to creating the house, and for upgrading the school’s shop facilities. The projects completed immediately following the Solar Decathlon utilized both digital fabrication and prefabrication. This is significant because the School intends to leverage both of these competencies, developed during the Solar Decathlon, in order to further the School’s craft-based pedagogy. Due to the Design-Build Studio’s development of the Solar Decathlon house, there has been …

Portland State University School Of Business Administration (Sba) Renovation + Personal Comfort Investigation, Abolfazl Mekanik, Corey Griffin, Louise Foster

Student Research Symposium

This poster discusses the results of a field study about indoor thermal comfort, based on investigations in Portland State University`s School of Business (SBA) classrooms. The field study was conducted by physical parameter monitoring and questionnaires. Both field monitoring and occupant surveys were performed at the same time during the regular class period.The measurement campaign consisted of measuring the environmental parameters such as temperature (Ta), relative humidity (RH), CO₂, and sound levels. The outdoor air temperature, humidity, and sound were registered every 2 hour period during class time. The intention for this project is to investigate thermal comfort …

Air Change Rate Vs Airflow Pathway: Bioaerosol Containment And Removal In Patient Rooms, Kevin R. Grosskopf

Durham School of Architectural Engineering and Construction: Faculty Publications

Recent studies have shown that higher air change rates may have the unintended consequence of creating turbulent airflows that entrain high concentrations of infectious particles within the breathing zone, and possibly, breakdown pressure relationships necessary to contain the spread of infectious particles to other clinical spaces.

Adaptive Predictive Functional Controller, Fadi Alsaleem, Arvind Rao

Durham School of Architectural Engineering and Construction: Faculty Publications

A controller device and a method for controlling a system that utilizes an adaptive mechanism to self-learn the system char acteristics and incorporates this adaptive self-learning ability to predict a control parameter correctly to provide precise control of a system component.