Construction Engineering Commons^™

Prediction Of Stress Increase At Ultimate In Unbonded Tendons Using Sparse Principal Component Analysis, Eric Mckinney, Minwoo Chang, Marc Maguire, Yan Sun

Durham School of Architectural Engineering and Construction: Faculty Publications

While internal and external unbonded tendons are widely utilized in concrete structures, an analytical solution for the increase in unbonded tendon stress at ultimate strength, ∆f_ps, is challenging due to the lack of bond between strand and concrete. Moreover, most analysis methods do not provide high correlation due to the limited available test data. The aim of this paper is to use advanced statistical techniques to develop a solution to the unbonded strand stress increase problem, which phenomenological models by themselves have done poorly. In this paper, Principal Component Analysis (PCA), and Sparse Principal Component Analysis (SPCA) …

A Practitioner’S Guide To Small Unmanned Aerial Systems For Bridge Inspection, Sattar Dorafshan, Robert J. Thomas, Calvin Coopmans, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Small unmanned aerial system(s) (sUAS) are rapidly emerging as a practical means of performing bridge inspections. Under the right condition, sUAS assisted inspections can be safer, faster, and less costly than manned inspections. Many Departments of Transportation in the United States are in the early stages of adopting this emerging technology. However, definitive guidelines for the selection of equipment for various types of bridge inspections or for the possible challenges during sUAS assisted inspections are absent. Given the large investments of time and capital associated with deploying a sUAS assisted bridge inspection program, a synthesis of authors experiences will be …

Hvac System Air Filter Diagnostics And Monitoring, Priotomo Abiprojo, Fadi M. Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

A system and method for monitoring a heating, ventilation, or air conditioning (HVAC) system of a building is provided. A monitoring server, located remotely from the building, receives operating parameter data from a monitoring device at the building that measures an operating parameter of the HVAC system. The monitoring server generates a plurality of data clusters from the operating parameter data, each data cluster corresponding to operating parameter data generated during steady-state operation of the HVAC system. The monitoring server calculates an average operating parameter value for each data cluster. The monitoring server calculates normalized operating parameter values based on …

Bs News January/February

Building Services Engineering

No abstract provided.

Notched Hollow Square Section Steel Column Buckling, Zia Razzaq, Solomon Tecleab

Civil & Environmental Engineering Faculty Publications

Presented in this paper is an outcome of a study to assess the effect of section loss in the form of longitudinal notches on the buckling load of hollow square section steel columns. The theoretical study includes buckling load estimates based on both an iterative equilibrium as well as a non-iterative energy approach. Buckling loads based on sample laboratory experiments are also presented. The study shows that the presence of a notch can significantly reduce the axial load-carrying capacity of a steel column.

Solar & Rain Catching Canopy "Urban Oasis 2", Afolabi Ibitoye, Cheriyah Wilmot, Alexander Aptekar, Grzegorz Kosieradzki, Kaiyrgul Sultanova, Jude Vallon

Publications and Research

The accumulation of water runoff during rain storms is a major problem in New York City’s combination water systems, forcing water treatment plants to release untreated excess water. To avoid overfilling of the sewer system by this grey water, pocket parks and gardens will be used to absorb the excess rainfall. We will be harnessing nature’s resources with current technologies such as: solar panels combined with rain catching canopies, to beautify the environment, educate the public about sustainability, stimulate growth to local businesses through increased foot traffic and bringing social awareness on environmental issues.

The canopies are designed to collect …

Unexpected Setbacks When Excavating – Using Gpr For Mitigating Risk: A Case Study, Samuel L. Marcum

Construction Management

Whether constructing on undeveloped land or on an existing developed site, there is a risk of encountering unexpected objects when excavating. With today’s technology in Ground Penetrating Radar (GPR), this risk can generally be mitigated. Using Whiting-Turner’s construction of Stanford University’s new ChEM-H & SNI Building as an example, this case study discusses the use of GPR for underground mapping, as well as various ways to implement GPR technology. The ChEM-H & SNI site had many underground utilities that required precise pot-holing to verify locations. Although pot-holing is widely used, it is a destructive method, it is time and labor …

Bs News November/December

Building Services Engineering

No abstract provided.

The Professional Constructor, Full Issue, Volume 43, Number 02

The Professional Constructor

No abstract provided.

The Adoption Of A Design Build Approach In Retrofit Projects – A Descriptive Case Study, Lloyd Scott

Conference papers

The delivery Design Build projects across the built environment in Ireland has begun to take significant shape. There are many examples of the traditional are moving towards more collaborative practices. There exists support for the integration of a design build project approach in the retrofit realm where designer, client and developer can work collaboratively. As with the regular design build process the intent behind this collaborative approach is to encourage those associated with the built environment to consider how retrofit design and construction can contribute positively to addressing elements of climate change and the design build process. The opportunity to …

Bs News September/October

Building Services Engineering

No abstract provided.

Examining The Microeconomics Of Bid Difference Of Engineer & Contractor Bids In Highway Construction, Robert Ryan, Randy R. Rapp, Mark Shaurette, Sarah Hubbard

The Professional Constructor

This study examines microeconomic factors that affect Bid Difference between the designer’s Engineer’s Estimate and the contractor’s Winning Bid. Historically, the accuracy of the Engineer’s Estimate and the Winning Bid vary. To account for this discrepancy, the Federal Highway Administration (FHWA) recommends a contingency be included in all Engineer’s Estimates. Statistical analysis was performed to determine if state Departments of Transportation (DOTs) were currently meeting the recommended Bid Difference values. Data was collected from California, North Carolina, and Ohio from 2012 through 2014. Statistical analysis indicates that current practices to develop an Engineer’s Estimate met the FHWA recommended values. With …

Designing A Modular Building: A Case Study For Modular Vs.Conventional Design For An Apartment Building, Christine Piper, Arun Thodupunoori

The Professional Constructor

To alleviate the diminishing number of tradespeople in the US construction industry, modular construction is an alternative construction process that could be used for repetitive construction applications. However, there are some misconceptions about modular construction including: limited architectural design options, design restrictions, lower quality, unaffordable and inability to design for sustainability. Modular construction is a process that streamlines the construction process and saves a significant amount of time while delivering a high quality building. In response to the misconception of design options, this case study presents the design considerations for transforming an apartment building that was designed and constructed using …

Application And Usage Of Design-Build By State Dots, Dennis Bausman, Mashrur Chowdhury, Christopher Cummings, Sasi Selvan

The Professional Constructor

This study examines the usage of design-build by the Department of Transportation (DOT) of the 50 states in the United States. Design-build has been growing in popularity as a procurement form in both the private and public sectors, and in the last ten years many DOTs have started or expanded programs to use design-build for infrastructure projects. However, many DOTs are still struggling to determine the best application of design build and how to incorporate its use as a procurement method for DOT projects. This study examines how state DOTs are using design-build, when they are using this delivery method, …

Assessment Of Electrical Contractors’ Perception And Practices With Project Risk Management, Anthony J. Perrenoud

The Professional Constructor

Project Risk Management is a critical construction management skillset for identifying risks, assessing risks, strategizing, and executing risk mitigation plans. Proactive risk management has been found to reduce negative impacts to project objectives and increase customer satisfaction. To improve project risk management contractors have a method of measuring perceptions and practices of risk management, also known as risk maturity. Previous research has identified a model for measuring five major attributes of risk maturity they are (1) management’s perspective of risk management; (2) organizational risk culture; (3) risk identification; (4) risk analysis; and, (5) standardized risk management process. This study presents …

Collaborative Risk Mitigation Through Construction Planning And Scheduling, Lane Kay Coble

The Professional Constructor

No abstract provided.

Construction Disputes In The United States And The United Kingdom: A Comparison, Anusree Saseendran, Ben F. Bigelow, Zofia Rybkowski, Dawn Jourdan

The Professional Constructor

Construction disputes are on the rise globally. They adversely affect the progress and quality of a construction project by resulting in cost overruns and delays. They are also time-consuming and expensive to resolve. Hence it is valuable to identify the most disputed topics in construction in the US and compare them to those in a different country. This helps better understand disputes, and the influence that culture and the difference in the nature of construction in the regions may have on disputes. This study was an attempt to identify and compare the most disputed topics in construction in the United …

High Performance Mortar With 100% Recycled Aggregate Using Titanium Dioxide Nanoparticles, Molly Schrager, Vito Francioso, Arjun Kadakia, Mirian Velay-Lizancos

The Summer Undergraduate Research Fellowship (SURF) Symposium

Concrete and mortar are materials commonly used in construction. Their main compounds are cement, aggregates (sand and gravel) and water. In an effort to increase the sustainability of these materials, the idea of using recycled aggregates from ground old concrete and using it to make mortar and concrete has gained more interest. It has two advantages: it reduces the need to mine for raw materials and lessens the amount of old and defective concrete that is typically put in landfills. But, the use of recycled concrete aggregate lowers the strength of mortars and concretes because the residual compounds in the …

My Catalyst, Gabrielle Gambino Lyon

Celebration of Learning

Over the course of my internship and shadow program with Pepper Lawson Construction and Ziegler Cooper Architects, I was able to explore the various career paths involved in the design, construction, and civil engineering fields. My work on the construction site of a high-rise apartment building located in the heart of Houston, TX allowed me first-hand experience working and learning alongside project engineers, contractors, building developers, and the construction team.

This project was the perfect confluence of my main areas of interest: structural, mechanical, civil, and environmental engineering, as well as architecture. My daily work consisted of on-site walk throughs, …

Bs News July/August

Building Services Engineering

No abstract provided.

Solar And Rain Catching Canopy. Urban Oasis, Afolabi Ibitoye, Langston Clark, Elena Zimareva, Evan Banks, Alexander Aptekar

Publications and Research

The Urban Oasis is designed to work within existing “pocket parks” in New York City as a combined rainwater collector, personal electronics charging station and resting designation for New Yorkers. Intended to not only lessen the demand on the city power grid by using renewable energy to charge devices, the urban oasis is also intended to mitigate grey water overfill in New York’s combined sewer system and, in general, serve as a model for responsible environmental stewardship in urban areas.

The important technical aspects of the canopy specifically analyzed were:

a) how much rainwater could the canopy be expected to …

Development Of A Model To Predict The Likelihood Of Complaints Due To Assorted Tone-In-Noise Combinations, Joonhee Lee, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper develops a model to predict if listeners would be likely to complain due to annoyance when exposed to a certain noise signal with a prominent tone, such as those commonly produced by heating, ventilation, and air-conditioning systems. Twenty participants completed digit span tasks while exposed in a controlled lab to noise signals with differing levels of tones, ranging from 125 to 1000 Hz, and overall loudness. After completing the digit span tasks under each noise signal, from which task accuracy and speed of completion were captured, subjects were asked to rate level of annoyance and indicate the likelihood …

Bs News May/June

Building Services Engineering

No abstract provided.

A Comparison Of Traditional Education And Project-Based Education In Construction Management, Trey Miller

Honors College Theses

Construction is a rapidly moving and constantly changing industry. The skills needed to manage the complex task of running a job site safely, on schedule, and within budget, are unique to the field. Construction Management as an academic field is relatively new discipline. Therefore the field is still rapidly evolving. In many cases, classes are taught by engineering professors, which leads to an engineering-focused education as opposed to a Project Management focused education. Therefore Construction Management students are not receiving the “hands-on” experience early enough in their studies. By structuring classes around an applied project, students will attain a more …

From Architectural Design To Structural Analysis: A Data-Driven Approach To Study Building Information Modeling (Bim) Interoperability, Mohammed Aldegeily

Masters Theses

BIM has been playing an essential role in building construction projects in recent years. It was used to automate many tasks such as clash detection, 4D planning, and quantity takeoff, among others. However, the interoperability of BIM still lacks in many fields across the architecture, engineering, and construction domains. This research studies the interoperability between architectural design and structural analysis. The goal is to explore structural analysis of BIM models through data transfer processes between different software platforms via three types of paths: (1) Application Programming Interface (API); (2) “immediately connect,” which is the direct link between software programs from …

The Professional Constructor, Full Issue, Volume 43, Number 01

The Professional Constructor

No abstract provided.

Bs News March/April

Building Services Engineering

No abstract provided.

Respirable Dust Monitoring In Construction Sites And Visualization In Building Information Modeling Using Real-Time Sensor Data, Nour Smaoui, Kyungki Kim, Omprakash Gnawali, Young-Joo Lee, Wonho Suh

Durham School of Architectural Engineering and Construction: Faculty Publications

Construction activities, involving cutting, drilling, and grinding of materials, often produce toxic respirable dust that can cause fatal diseases and illnesses. To protect workers from breathing excessive amounts of respirable dust at job sites, superintendents should continuously monitor the level of respirable dust in workspaces and make timely interventions for overexposed workers. However, current practices of respirable dust monitoring have critical drawbacks, and superintendents cannot accurately estimate workers’ exposures to respirable dust or make prompt decisions to protect the workers. Therefore, there is a need for real-time air dust monitoring that can be deployed ubiquitously at a construction site and …

Analyses Of Crowd-Sourced Sound Levels Of Restaurants And Bars In New York City, Gregory S. Farber, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

For several decades, there has been a significant need to better educate the public about noise pollution. A small number of small-scale studies have focused on the sound levels of restaurants and their impact on health and hearing. There have also been an increasing number of media articles stating that eating and drinking venues are getting increasingly loud making it more difficult for people to connect with others in conversation. This study reports on an exploratory large-scale noise survey of sound levels of 2,376 restaurants and bars in New York City using a novel smart-phone application and categorized them based …

Numerical Simulation Of Fault Impacts For Commercial Walk-In Freezers, Alireza Behfar, David P. Yuill

Durham School of Architectural Engineering and Construction: Faculty Publications

Refrigeration systems can undergo many faults that could negatively affect their operation and performance. This paper describes a modeling process to simulate the fault impacts on the operation of a commercial walk-in freezer using semi-empirical models. These models often require less modeling effort than full forward models and could be used in scenarios where detailed information is missing, such as in field-measured systems. An important characteristic of a typical walk-in refrigeration system is the existence of a liquid-line receiver after the condenser, which significantly changes the behavior of the cycle, in comparison to a receiver-less system. Component models described in …