Architectural Engineering Commons^™

Synergetic Effect Of Viscosity Modifying Admixtures And Polycarboxylate Ether Superplasticizer On Key Characteristics Of Thixotropic Uhpc For Bonded Bridge Deck Overlay Rehabilitation, Le Teng, Ming Jin, Jiadi Du, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Thin bonded ultra-high-performance concrete (UHPC) overlay is an advanced technology for bridge deck rehabilitation. UHPC should be tailored to secure adequate flowability and high thixotropy to facilitate mixing and placement with a low risk of sagging of the material on sloped bridge deck surfaces. The synergetic effect between nano clay (NC) and polycarboxylate ether (PCE) superplasticizer or cellulose-based viscosity modifying admixture (VMA) and PCE on the rheological properties (yield stress, plastic viscosity, and thixotropy), cement hydration, autogenous shrinkage, compressive strength, and porosity was systematically investigated. The bond strength between conventional concrete (CC) representing existing bridge deck concrete and thixotropic UHPC …

In Situ Synthesis, Characterization And Photocatalytic Efficacy Of Silver-Enhanced Mxene And Graphene Nanocomposites, Kishore Chand, M. Mustafa Azeem, Muhammad Nazim Lakhan, Mukhtiar Ahmed, Muhammad Jehanzaib Aslam, Ahmer Hussain Shah

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The emergence of 2D materials has significantly expanded the wide range of nanomaterials with diverse applications. Notably, their high conductivity, catalytic efficiency, and hydrophobicity have fueled heightened research interests for water treatment applications. This research aimed to investigate the synthesis and characterization of MXene and reduced graphene oxide (rGO) nanocomposites with silver nanoparticles (Ag) for enhanced catalytic activity in the decomposition of Direct Blue-24 dye. In this study, we employed well-established methods, previously documented in the literature, to prepare two distinct nanocomposites. Novel nanocomposites, namely reduced graphene oxide–silver nanoparticles (rGO–Ag) and MXene–silver nanoparticles (MXene–Ag), were synthesized using the hydrothermal and …

In Situ Synthesis, Characterization And Photocatalytic Efficacy Of Silver-Enhanced Mxene And Graphene Nanocomposites, Kishore Chand, M. Mustafa Azeem, Muhammad Nazim Lakhan, Mukhtiar Ahmed, Muhammad Jehanzaib Aslam, Ahmer Hussain Shah

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The emergence of 2D materials has significantly expanded the wide range of nanomaterials with diverse applications. Notably, their high conductivity, catalytic efficiency, and hydrophobicity have fueled heightened research interests for water treatment applications. This research aimed to investigate the synthesis and characterization of MXene and reduced graphene oxide (rGO) nanocomposites with silver nanoparticles (Ag) for enhanced catalytic activity in the decomposition of Direct Blue-24 dye. In this study, we employed well-established methods, previously documented in the literature, to prepare two distinct nanocomposites. Novel nanocomposites, namely reduced graphene oxide–silver nanoparticles (rGO–Ag) and MXene–silver nanoparticles (MXene–Ag), were synthesized using the hydrothermal and …

New Method To Calculate Friction Velocity In Smooth Channel Flows Using Direct Numerical Simulation Data, Harshit Mishra, S. Karan Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this paper, we leverage the direct numerical simulation (DNS) data for closed-channel flow for a range of friction Reynolds number (Reτ∼180-5,000) to develop a new one-point friction velocity method (OPFVM) to calculate friction velocity U∗ in terms of free-surface velocity Um, flow depth h, and kinematic viscosity ν. In contrast to prevalent methods that require several cumbersome near boundary measurements to obtain friction velocity, the OPFVM relies on a single easy-to-measure free-surface velocity measurement. The formulation is used to obtain friction velocity for a closed-channel flow (CCF) DNS regime with Reτ=10,049 and on four open-channel flow (OCF) DNS regimes …

Freezing-Thawing Hysteretic Behavior Of Soils, Jidong Teng, Antai Dong, Sheng Zhang, Xiong Zhang, Daichao Sheng

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The soil freezing characteristic curve (SFCC) plays a crucial role in investigating the soil freezing-thawing process. Due to the challenges associated with measuring the SFCC, there is a shortage of high-quality or rigorous test results with sufficient metadata to be effectively used for applications. Current researchers typically conduct freezing tests to measure the SFCC and assume a singular SFCC when studying the freezing-thawing process of soils, although limited studies indicated that there is a hysteresis during the freezing and thawing process. In this paper, a series of freezing-thawing tests were performed to assess the SFCC, utilizing a precise nuclear magnetic …

2023 Kahramanmaras Earthquake Sequence: Geospatial Visualization And Analysis Of Multiple Building Damage Datasets, Alejandra Bravo, Jerry Hue Truong Luong, Anahid Behrouzi

Architectural Engineering

To learn from past earthquake events, a critical task is validating observations with data. After a significant seismic event like the 2023 Kahramanmaras Türkiye earthquake series, various organizations perform reconnaissance efforts to collect building response data. Some reconnaissance missions focus on visiting fewer buildings and recording detailed information (high-resolution, HR), while others aim to visit as many buildings as possible recording basic information (low-resolution, LR). Both dataset types are vital for learning, and the next step is analyzing and visualizing the data to validate in-field observations. This paper has three purposes: 1) examine a HR dataset by Degenkolb with 138 …

Development Of An Undergraduate Course On Women In The Design Of The Built Environment, Anahid Behrouzi, Kira Hope Tolman, Paige Van Rossum

Architectural Engineering

The Cal Poly in San Luis Obispo (Cal Poly) Architectural Engineering (ARCE) department has seen significant progress in reaching gender equity as evidenced by recent student enrollment numbers. However, ARCE-affiliated technical and history classes still lack discussion of notable female practitioners or the value of input from women as project stakeholders. This educational shortcoming is likely true at many other civil or structural engineering, construction management, and architecture programs. To address this gap, the authors developed a new 1-credit hour course offered in Spring 2024 to Cal Poly Honors and ARCE students to expose them to the contributions and concerns …

Increasing Drift Capacity Of Non-Ductile Concrete Shear Walls Through Confinement With Fiber-Reinforced Polymer Application, Andrew Duong, Sophia Maglabe, Sheyna Rongong, Peter Laursen, Andrew Kline, Anahid Behrouzi

Architectural Engineering

The seismic response and laboratory testing of pre-1980s reinforced concrete (RC) shear walls commonly exhibit undesirable concrete crushing and rebar buckling in the wall end-zones leading to a flexural compressive failure. The lack of ductility of these walls is attributed to low reinforcement ratios and absence of special boundary elements (SBE) as required by modern design code. Thus, the authors are proposing a fiber reinforced polymer (FRP) retrofit method to provide confinement to the end-zones of pre-1980s walls equivalent to that of an SBE.

Current industry applications of FRP have largely been for shear strengthening of RC beams, columns, and …

The Impact Of Outdoor Thermal Comfort On Users’ Walkability: Case Study In Al Ain Square, Al Ain City, Uae, Alyazia Saeed Alnehayan

Thesis/ Dissertation Defenses

Living in a hot dry arid climate limits the walkability of its inhabitants. The excessive heat and dryness of the weather undoubtedly make walking a less tempting, encouraging, and pleasant choice for getting around the city. For that reason, this master thesis analyzes the various strategies used to enhance outdoor thermal comfort. Outdoor thermal comfort is controlled by numerous factors, including street and building orientation, vegetation, shading devices, and water bodies. The purpose of this study is to examine the relationship between walkability and UTCI values (universal thermal comfort index) in the context of Al Ain Square, a neighborhood in …

Rotational Rheometry Test Of Portland Cement-Based Materials – A Systematic Literature Review, Laura Silvestro, Artur Spat Ruviaro, Geannina Lima, Luís Urbano Durlo Tambara Júnior, Dimitri Feys, Ana Paula Kirchheim

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This Study Systematically Reviews 62 Papers on the Use of Rotational Rheometry to Assess the Fresh State Behavior of Portland Cement-Based Materials. the Research Highlights the Wide Variation in Test Methods and Aims to Provide a Comprehensive overview. Findings Reveal that 50.0% of Studies Employed Vane Geometry, despite its Limitations in Providing Transformation Equations. Regarding Dynamic Shearing Tests, 67.0% Followed a Consensus using a Pre-Shearing Step and a Stepwise Routine with Stabilization Times ≥ 10 S. While the Bingham Model is Commonly Used, the Study Emphasizes the Importance of Considering Shear-Thinning Behavior in Cementitious Materials. Models Like Herschel-Bulkley and Modified …

Sustainable Sensing With Paper Microfluidics: Applications In Health, Environment, And Food Safety, Sanjay Kumar, Jyoti B. Kaushal, Heow Pueh Lee

Durham School of Architectural Engineering and Construction: Faculty Publications

This manuscript offers a concise overview of paper microfluidics, emphasizing its sustainable sensing applications in healthcare, environmental monitoring, and food safety. Researchers have developed innovative sensing platforms for detecting pathogens, pollutants, and contaminants by leveraging the paper’s unique properties, such as biodegradability and affordability. These portable, low-cost sensors facilitate rapid diagnostics and on-site analysis, making them invaluable tools for resource-limited settings. This review discusses the fabrication techniques, principles, and applications of paper microfluidics, showcasing its potential to address pressing challenges and enhance human health and environmental sustainability.

3d Printing Of Fiber-Reinforced Calcined Clay-Limestone-Based Cementitious Materials: From Mixture Design To Printability Evaluation, Haodao Li, Jingjie Wei, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Sustainability and limitations in embedded reinforcement are the main obstacles in digital fabrication with concrete. This study proposed a 3D printable fiber-reinforced calcined clay-limestone-based cementitious material (FR-LC3). The binder systems incorporating calcined clay (CC) and limestone filler (LF) were optimized by determining the flow characteristics and water retention ability of the paste. The effect of fiber volume on the key fresh and mechanical properties of the fiber-reinforced mortars made with the optimized binder was evaluated. A combination of offline assessments and inline printing were employed to investigate the printability of the FR-LC3 with various binder systems and viscosity-modifying admixture (VMA) …

Design With, Not For, Local Community: Utilizing E- Participation Tools In The Design Of Socially Sustainable Vertical Emirati Public Housing, Omar Sherzad Shareef

Theses

Few years ago, local and federal governments in the UAE started to design and develop vertical public housing for Emirati residents as a new public housing typology that is believed to be more environmentally sustainable. Dibba Al-Hisn Housing Scheme in Sharjah and Al-Ghurfa Project in Al-Fujairah, are two recently developed vertical Emirati public housing projects developed by Sharjah Housing Directorate and Sheikh Zayed Housing Program (SZHP) respectively. Both projects, have been professionally designed, however, the residents’ opinions were not considered in the design process. Therefore, the main objective of this research is to explore the potentials of utilizing the advanced …

The Impact Of Outdoor Thermal Comfort On Users’ Walkability: Study Case In Al Ain Square, Al Ain City, Uae, Alyazia Saeed Alnehayan

Theses

Living in a hot dry arid climate limits the walkability of its inhabitants. The excessive heat and dryness of the weather undoubtedly make walking a less tempting, encouraging, and pleasant choice for getting around the city. For that reason, this master thesis analyzes the various strategies used to enhance outdoor thermal comfort. Outdoor thermal comfort is controlled by numerous factors, including street and building orientation, vegetation, shading devices, and water bodies. The purpose of this study is to examine the relationship between walkability and UTCI values (universal thermal comfort index) in the context of Al Ain Square, a neighborhood in …

Application Of Multidisciplinary Community Resilience Modeling To Reduce Disaster Risk: Building Back Better, Wanting "Lisa" Wang, John W. Van De Lindt, Blythe Johnston, P. Shane Crawford, Guirong Grace Yan, Thang Dao, Trung Do, Katie Skakel, Mojtaba Harati, Tu Nguyen, Robinson Umeike, Silvana Croope, Andre R. Barbosa

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

From december 10 to december 11, 2021, a deadly tornado outbreak struck across several states in the us, including arkansas, illinois, kentucky, and tennessee. This tornado outbreak resulted in at least $3.9 Billion in damage, more than 90 fatalities, and hundreds of injuries. Mayfield, kentucky, a small city in the eastern united states, was hit by a long-track tornado rated as an enhanced fujita 4 (ef4) scale and was one of the communities most heavily damaged during the tornado outbreak. Following the 2021 tornado event, an analysis was performed in the interdependent networked community resilience modeling environment (in-core) for the …

Reconstruction Of The Neglected: Bringing Life Back To The Old Powerhouse, Zoe A. Macmillan

Architectural Engineering

The Powerhouse is the oldest extant structure on Cal Poly campus and is currently abandoned. Built in 1910, it was in use as a power supply for Cal Poly Campus until the 1940s. Then, the School of Architecture and Environmental Design was granted permission to use it for class purposes. From 1967-1990 it was used as studio, guest lecture, and office space. In 1990 it was deemed structurally unstable and was left empty, slated for demolition. In 1993, a student lead movement placed it on the National Register of Historic Structures. Since then, it has been in a state neglect, …

Masonry Column Analysis Through Python, Ali Sherief Saleh

Architectural Engineering

This project serves as a study of Masonry Column Analysis and Design through the lens of the TMS 402 (22) Code: mimicking in-firm tools without using finite-element analysis. Chapter 9 of the TMS 402 (22) code provides the outline of the process taken to analyze these columns.

Investigation compares columns using the Python program to hand-calculations designs as to show additional capability that is lost due to approximation. PM-interaction for the columns is computed by a stress-strain approach. This report expands on the python design and approach to User Interface and inputs that are needed to analyze multiple datatypes with …

Initiative To Increase Student Engagement In Undergraduate Structural Analysis Course, Danielle Rose Flores, Diego Alberto Tomas

Architectural Engineering

This report documents the design of physical models, software aids, homework supplements, and industry-related activities to support the Learn by Doing philosophy in an undergraduate structural analysis lecture and laboratory course pairing offered at California Polytechnic State University, San Luis Obispo in the Architectural Engineering department. The ARCE 302 Structural Analysis and ARCE 352 Structural Computing Analysis courses cover the fundamentals of analyzing indeterminate structures, primarily focusing on theoretical concepts and calculations.

Prior to the development of any new course materials for this project, feedback from students who had previously taken the courses was collected via a survey in the …

Modeling And Design Parameter Optimization To Improve The Sensitivity Of A Bimorph Polysilicon-Based Mems Sensor For Helium Detection, Sulaiman Mohaidat, F. M. Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

Helium is integral in several industries, including nuclear waste management and semiconductors. Thus, developing a sensing method for detecting helium is essential to ensure the proper operation of such facilities. Several approaches can be used for helium detection, including based on the high thermal conductivity of helium, which is several times higher than air. This work utilizes the high thermal conductivity of helium to design and analyze a bimorph MEMS sensor for helium sensing applications. COMSOL Multiphysics software (version 6.2) is used to carry out this investigation. The sensor is constructed from poly-silicon and SiO₂ materials with a trenched …

Chioma Di Ulivo - Courtyard Canopy, Lilla J. Vigh, Claudia A. Geist

Architectural Engineering

Chioma di Ulivo ("Olive Tree Canopy") is the investigation and design of a canopy structure in the Engineering West (Bldg. 21) Hasslein Courtyard. The canopy will serve as a filtration system for both water and fallen olives from the olive tree on site, while providing a functional collaboration space for faculty and students alike. The goal of this project was to construct a quality diorama built by Lilla Vigh and Claudia Geist under the supervision of Dr. Craig Baltimore.

Polypropylene As Partial Fine Aggregate Substitute In Concrete, Samuel E. Royston, Chrisitan G. Achkar, Nicholas B. Tabarez

Architectural Engineering

The objective of this project is to discover a structurally effective method in repurposing recyclable plastic waste through its partial substitution for traditional fine aggregate in concrete.

Results obtained from analysis indicate a 25 percent compressive strength reduction with polypropylene at a 10 percent partial substitution for total sand content. This material successfully performed as an alternative, presenting a ductile mode of failure.

Three material alternatives - polypropylene, polyethylene, and rubber - were substituted for a percentage of sand. These materials underwent concrete cylinder crushing tests to determine their ultimate crushing strength, with the intent of identifying the most effective …

The Wall Group, Richard Antablin, Sara Engmyr, Michelle Griffith, Jora Leigh, Jesse Rainsdon

Architectural Engineering

This project aimed to design and construct an art wall in Poly Canyon to deter graffiti on existing structures and provide a designated area for student expression. However, after prolonged iterative revisions, it became evident that the project was significantly behind the original timeline.

It was recommended that the wall proposal be submitted for future student implementation. Instead of constructing the wall, an alternative course of action was proposed: restoring an existing structure in Poly Canyon to provide the desired hands-on experience.

After careful consideration, the Techite Bridge was selected for restoration. The proposed plan involves thorough cleaning, repairing chipped …

Smith Property Pre-Engineered Metal Barn, Trent Arjay Olmstead

Architectural Engineering

The Smith Residence Barn is a pre-engineered metal building designed to provide additional storage and workspace. The Architectural design was created by the Nunno Corporation, a San Luis Obispo based steel building general contractor. The soils report was created by Mid-Coast Geotechnical, INC. and the report’s conclusions were used for determining site conditions related to the foundation and lateral force system design. The structural calculations and plans were created by Trent Olmstead and reviewed by Brian Marc-Aurele, SE and Chris Murphy, SE. All calculations were done in accordance with the 2022 CBC, ASCE 7-16, 2023 AISC, ACI 318-19, and AISI …

Earning Engagement As A Graduate Student Instructor, Matthew Sloss

Architectural Engineering

One of the key benefits of a Cal Poly education is access to experienced instructors in a small classroom setting. In my final quarter at Cal Poly, I had the opportunity to glance behind the curtain and fill the significant shoes of an instructor of an introductory structural statics class. What initially was a chance to lend a hand to the department by sharing my limited experience turned into a thorough exploration of what it means to be productively engaging and of how to utilize the underrealized power of asking questions in the classroom setting. This report documents my experiences …

Cardboard Concrete Column Formwork, Danny Shrestha, Joelle Schalesky

Architectural Engineering

This project is an exploration of cardboard as a potential material for construction formwork for concrete columns. Multiple material tests were conducted to explore the behavior of cardboard and concrete. Multiple specimens of cardboard were tested for modulus of elasticity, moment of inertia, and tensile strength. Concrete was tested for its apparent lateral fluid pressure under vibration. Cardboard formwork was then designed and constructed based on these tested behaviors. The final design of the formwork consisted of folding cardboard sheets lined with hardboard, supported by wood studs, and tied by plastic banding straps.

Ultimately, two concrete columns―8' and 10' in …

Ace Mentor Program - Central Coast Chapter, Brayden Samuel Groshart

Construction Management

For my senior project, I established a chapter of the ACE (Architecture, Construction, and Engineering) Mentor Program in San Luis Obispo, California. This program provides high school students with hands-on experience and exposure to careers in the architecture, construction, and engineering industries. The program spanned eight weeks, balancing theoretical knowledge and practical application. The curriculum began with sessions on the fundamentals of architecture, engineering, and construction. In order to expose the students to real world practices, we organized tours of an architecture firm, an engineering firm, and an active construction site. These visits allowed students to engage with professionals, observe …

Construction Of Lightly Reinforced Concrete Shear Wall And Footings, Luke Jackson Method

Construction Management

This paper details the construction of two cast in place foundations as well as a lightly reinforced cast in place wall. The project, located inside the high bay, provides the Architectural Engineering (ARCE) department with an opportunity to test Fiber Reinforced Polymer wrap as a retrofitting option for walls dating back to pre-1980s. Due to site conditions, and project design, this project required extensive planning and communication within our team, faculty advisors, and shop technicians. This paper will discuss the phasing of construction and procurement of material that was required for the completion of this project. It also aims to …

Son Care Foundation – Lean To Shade Structure Design And Construction, Ryan Joseph Mccann

Construction Management

This paper discusses the design and construction of a lean-to-shade structure built for the Son Care Foundation in San Luis Obispo. The Son Care Foundation is a nonprofit organization that raises guide dogs for veterans and first responders with PTSD. This shade structure is 16 feet long and 6 feet wide, its height slopes from 9 feet in the front down to 8 feet in the back creating a roof pitch of 2:12. The sheet metal roof also has an overhang of approximately 1 foot. As requested by the client, the shade structure was designed to fit the aesthetic of …

Restoration Of The Cantilever Deck In Poly Canyon, Calvin S. Morgan, Calvin P. Vigeant, Roger G. Biddle

Construction Management

This interdisciplinary project aims to restore the Cantilever Deck in the Experimental Structures Laboratory back to an operational condition. As of Spring 2023, the deck has fallen into a state of disrepair and has been deemed structurally unsound by the university. The structural disrepair is concentrated around the wooden beams underneath the deck, but the handrails and overall color of the assembly have also fallen to levels deemed undesirable. The Restoration will remedy all these issues as well as guarantee that our repairs will last long into the future. This project is an interdisciplinary effort, the team consists of ARCE …

Architecture As A Carbon-Based Practice, Qixin Yu

Masters Theses

Carbon serves as both a silent protagonist and a looming antagonist in the narrative of architecture, shaping not only the physical structures we inhabit but also the ecological legacy we leave behind.

Centuries of human exploitation of the environment have led to climate and material crises. Shifting this dynamic requires action at micro (matter), meso (material), and macro (materiality) levels. Biogenic materials offer significant potential for carbon sequestration and present opportunities for the building industry to collaborate with nature rather than merely extract from it.

This thesis establishes a research and manufacturing practice that prioritizes material innovation, carbon sequestration, environmental …