Architectural Engineering Commons^™

The Facility Infection Risk Estimator™: A Web Application Tool For Comparing Indoor Risk Mitigation Strategies By Estimating Airborne Transmission Risk, Marcel Harmon, Josephine Lau

Durham School of Architectural Engineering and Construction: Faculty Publications

The COVID-19 pandemic created needs for (a) estimating the existing airborne risk of infection from SARS-CoV-2 in existing facilities and new designs and (b) estimating and comparing the impacts of engineering and behavioural strategies for contextually reducing that risk. This paper presents the development of a web application to meet these needs, the Facility Infection Risk Estimator™, and its underlying Wells–Riley based model. The model specifically estimates (a) the removal efficiencies of various settling, ventilation, filtration and virus inactivation strategies and (b) the associated probability of infection, given the room physical parameters and number of individuals infected present with either …

Designing Gfrp-Reinforced Tilt-Up Wall Panels, Fray F. Pozo-Lora, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Tilt-up construction was effectively enabled on a wide scale in 1979, when the ACI committee 551 report on Tilt-up construction was published, the Recommended Tilt-Up Wall Design, aka, the Yellow Book and the subsequent ACI-SEASC Task, aka the Green Book, and another Tilt-up design and construction manual developed by the ACI in 1988. The Tilt-up Concrete Association was created in 1986 by a group of industry professionals who had the need of an organization dedicated to the industry. ACI 551 maintains a document outlining the standard practice for contemporary Tilt-up design and construction. The ACI 551 document does not consider …

Performance Evaluation Of A Prestressed Belitic Calcium Sulfoaluminate Cement (Bcsa) Concrete Bridge Girder, Nick Markosian, Raed Tawadrous, Mohammad Mastali, Robert J. Thomas, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Belitic calcium sulfoaluminate (BCSA) cement is a sustainable alternative to Portland cement that offers rapid setting characteristics that could accelerate throughput in precast concrete operations. BCSA cements have lower carbon footprint, embodied energy, and natural resource consumption than Portland cement. However, these benefits are not often utilized in structural members due to lack of specifications and perceived logistical challenges. This paper evaluates the performance of a full-scale precast, prestressed voided deck slab bridge girder made with BCSA cement concrete. The rapid-set properties of BCSA cement allowed the initial concrete compressive strength to reach the required 4300 psi release strength at …

Discrete Rigid Block Analysis To Assess Settlement Induced Damage In Unreinforced Masonry Façades, Ryan Ehresman, Nathan Taylor, Bora Pulatsu, Ece Erdogmus

Durham School of Architectural Engineering and Construction: Faculty Publications

In this study, a system of discontinuous rigid blocks is employed to simulate the possible damage mechanisms in unreinforced masonry (URM) façades and load-bearing frame systems subjected to settlement using the discrete element method (DEM). First, the employed modeling strategy is validated utilizing the available experimental results presented in the literature. Once there is a good agreement between the computational models and experimental findings, a sensitivity analysis is performed to quantify the influence of the input parameters defined in the DEM-based numerical model. Finally, the proposed modeling strategy is further utilized to assess the damage pattern that may develop in …

Modernization Of Scienttific Mathematics Formula In Technology, Iwasan D. Kejawa Ed.D, Prof. Iwasan D. Kejawa Ed.D

Department of Mathematics: Faculty Publications

Abstract
Is it true that we solve problem using techniques in form of formula? Mathematical formulas can be derived through thinking of a problem or situation. Research has shown that we can create formulas by applying theoretical, technical, and applied knowledge. The knowledge derives from brainstorming and actual experience can be represented by formulas. It is intended that this research article is geared by an audience of average knowledge level of solving mathematics and scientific intricacies. This work details an introductory level of simple, at times complex problems in a mathematical epidermis and computability and solvability in a Computer Science. …

A Comparison Between Ultrasonic Guidedwave Leakage And Half-Cell Potential Methods In Detection Of Corrosion In Reinforced Concrete Decks, Ahmad Shoaib Amiri, Ece Erdogmus, Dana Richter-Egger

Durham School of Architectural Engineering and Construction: Faculty Publications

This article presents the advantages and limitations of a recently developed Ultrasonic Guided Wave Leakage (UGWL) method in comparison to the well-known Half-Cell Potential (HCP) method in their ability to detect corrosion in reinforced concrete (RC) bridge decks. This research also establishes a correlation between UGWL data and chloride content in concrete RC slabs. Concrete slabs submerged in a 10% NaCl solution were monitored using both methods over a period of six months. The chloride content from the three cores (0.84, 0.55, and 0.18%) extracted from the slab after the 6-month long process all exceeded the chloride threshold values suggested …

Out-Of-Plane Behavior Of Concrete Insulated Wall Panels With 2-Inch, 8-Inch, And 10-Inch Insulation, Jacob Luebke

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Insulated concrete sandwich wall panels provide structurally and thermally efficient building envelopes and are becoming more popular as energy regulations tighten. To continually adapt to an ever-changing building market and new energy regulations, insulated concrete wall panels are being constructed with thinner wythes, thicker insulation, and relying on partial composite action to decrease material costs and increase thermal and structural efficiency. Numerous methods of the design of partially composite insulated concrete sandwich wall panels have been introduced in recent decades and have been verified by comparing their results to existing experimental testing. Existing testing data for insulated concrete sandwich wall …

Studying Acoustical Characteristics Of Occupied Restaurants, Jared Paine

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Sound level data and occupancy data have been logged in five restaurants by the research team at the University of Nebraska–Lincoln. Sound levels and occupancy at 10 second intervals were documented over time periods of roughly two hours during active business hours. Noise levels were logged with dosimeters distributed throughout each restaurant, and occupancy was obtained from images recorded by infrared cameras. This work presents data on average sound levels and statistical metrics, such as L10 and L90 values as well as on each restaurant’s Acoustical Capacity and Quality of Verbal Communication, as introduced by Rindel (2012). Acoustical Capacity is …

Facilitating The Industrial Sector's Adoption Of Collaborative Project Delivery Methods, Xavier Wood-Aliberch

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

In an effort to improve outcomes in the civil and healthcare sectors, clients have adopted collaborative project delivery methods for the delivery of their capital projects. The success stories in these sectors have gathered the attention of clients in the industrial sector, where cost and schedule overruns have become the norm. The central objective of this thesis is to help clients make the transition to this new type of project delivery.

This thesis was written in a three-paper format, where each paper addresses a challenge with the adoption of collaborative delivery methods. The first paper investigates what type of industrial …

Exploiting Pull-In/Pull-Out Hysteresis In Electrostatic Mems Sensor Networks To Realize A Novel Sensing Continuous-Time Recurrent Neural Network, Mohammad H. Hasan, Amin Abbasalipour, Hamed Nikfarjam, Siavash Pourkamali, Muhammad Emad-Un-Din, Roozbeh Jafari, Fadi Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

The goal of this paper is to provide a novel computing approach that can be used to reduce the power consumption, size, and cost of wearable electronics. To achieve this goal, the use of microelectromechanical systems (MEMS) sensors for simultaneous sensing and computing is introduced. Specifically, by enabling sensing and computing locally at the MEMS sensor node and utilizing the usually unwanted pull in/out hysteresis, we may eliminate the need for cloud computing and reduce the use of analog-to-digital converters, sampling circuits, and digital processors. As a proof of concept, we show that a simulation model of a network of …

Quasi-Static Nonlinear Seismic Assessment Of A Fourth Century A.D. Roman Aqueduct In Istanbul, Turkey, Semih Gonen, Ece Erdogmus, Engin Karaesmen, Erhan Karaesmen

Durham School of Architectural Engineering and Construction: Faculty Publications

The majority of architectural heritage consists of load-bearing masonry components made up of stone units and relatively weak mortar joints, yielding potential weak planes for masonry structures where tension and shear failures are expected to occur. Advanced nonlinear analyses are required to simulate these phenomena and predict the corresponding nonlinear structural behavior of historic masonry constructions. In this context, this paper presents a model of a stone masonry Roman aqueduct (the Valens Aqueduct), constructed in the fourth century A.D. in Istanbul, Turkey, to explore the seismic capacity and behavior using the discrete element method (DEM). The employed modeling approach comprises …

Feasibility Of Lora For Smart Home Indoor Localization, Kyungki Kim, Sining Li, Milad Heydariaan, Nour Smaoui, Omprakash Gnawali, Wonho Suh, Min Jae Suh, Jung In Kim

Durham School of Architectural Engineering and Construction: Faculty Publications

With the advancement of low-power and low-cost wireless technologies in the past few years, the Internet of Things (IoT) has been growing rapidly in numerous areas of Industry 4.0 and smart homes. With the development of many applications for the IoT, indoor localization, i.e., the capability to determine the physical location of people or devices, has become an important component of smart homes. Various wireless technologies have been used for indoor localization includingWiFi, ultra-wideband (UWB), Bluetooth low energy (BLE), radio-frequency identification (RFID), and LoRa. The ability of low-cost long range (LoRa) radios for low-power and long-range communication has made this …

Forecasting The Construction Expenditure Cash Flow For Transportation Design-Build Projects With A Case-Based Reasoning Model, Yunping Liang, Baabak Ashuri, Mingshu Li

Durham School of Architectural Engineering and Construction: Faculty Publications

Accurately forecasting the construction expenditure cash flow of transportation projects is critical for state departments of transportation (state DOTs) to secure sufficient funding to cover their fiscal obligations throughout the project development timeline. However, there is no quantitative model to assist state DOTs in accurately forecasting expenditure cash flows for design-build projects. At the outset of awarding a typical design-build contract, the design has not been finalized to enable exact quantities for a detailed cost estimate. This issue represents a big difference between design-build and design-bid-build projects that makes estimating the project payouts more difficult for design-build projects. This research …

Enhancing Bim Implementation In The Ethiopian Public Construction Sector: An Empirical Study, Solomon Belay, James D. Goedert, Asregedew Woldesenbet, Saeed Rokooei3

Durham School of Architectural Engineering and Construction: Faculty Publications

Recently, the popularity of BIM has grown rapidly in the public construction sector. However, only a few studies so far have been seeking to address the BIM adoption benefits and barriers in developmental public projects across the low-income countries. Thus, the study aims to investigate the benefits and barriers of BIM adoption in the context of the Ethiopian infrastructure market. To achieve the objectives, a comprehensive systematic literature review was conducted to identify BIM adoption benefits and barriers in developing countries. Then, a structured questionnaire survey was conducted to collect data from various professionals working in organizations including client, consultant, …

Condition Rating Prediction Using An Interactive Deterioration Model Development Package, Minwoo Chang, Mitchell S. Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper presents an advanced method to determine explanatory variables required for developing deterioration models without the interference of human bias. Although a stationary set of explanatory variables is ideal for long-term monitoring and asset management, the penalty regression results vary annually due to the innate bias in the inspection data. In this study, weighting factors were introduced to consider the inspection data collected for several years, and the most stationary set was identified. To manage the substantial amount of inspection data effectively, we proposed a software package referred to as the Deterioration Model Development Package (DMDP). The objective of …

Led Zip Model Development, Mhd Anas Alkrch

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

The representation of load components deemed to be an essential factor for power system studies as the load characteristics influence the system performance. Thus, choosing an appropriate load model for load behavior studies is very significant for system analysis purposes. Load models can be categorized into three types: static, dynamic, and composite models. Static ZIP load model is a well-known model in the power industry, it represents the relationship between the active and reactive power as a function of the applied voltage. In this paper, a detailed review of the existing static ZIP model coefficients for load components achieved by …

Quality Control In Concrete Pavement: Early Detection Of Near-Surface Honeycombing With Gpr, Theresa Mccabe

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

This thesis presents utilization of Ground Penetrating Radar (GPR) for the assessment of highway pavements to gain a better understanding of this NDE method’s capabilities in terms of early detection of consolidation-caused air voids in brittle materials. The objectives are to first, determine the earliest time during the dormant, setting, and early hardening periods of concrete’s set that GPR can be used to detect shallow air voids. Secondly, the change in dielectric constant will be tracked over the first 24 hours of concrete setting in order to quantify the impact of the dielectric constant assumptions in early detection. Two different …

Framework For Extracting And Characterizing Load Profile Variability Based On A Comparative Study Of Different Wavelet Functions, Andrew Parker, Kevin James, Dongming Peng, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

The penetration of distributed energy resources (DERs) on the electric power system is changing traditional power flow and analysis studies. DERs may cause the systems' protection and control equipment to operate outside their intended parameters, due to DERs' variability and dispatchability. As this penetration grows, hosting capacity studies as well as protection and control impact mitigation become critical components to advance this penetration. In order to conduct such studies accurately, the electric power system's distribution components should be modeled correctly, and will require realistic time series loads at varying temporal and spatial conditions. The load component consists of the built …

Leveraging Abet Accreditation To Promote Inclusion Of Noise Control Engineering Concepts In Engineering Programs, Lily M. Wang, Bryan Beamer

Durham School of Architectural Engineering and Construction: Faculty Publications

Accreditation Board for Engineering and Technology, Inc. (ABET) accreditation is an internationally recognized system ensuring consistency and quality in engineering education programs. As a part of ABET accreditation, there is no set requirement for any general engineering program to include noise control engineering concepts in their curricula. However, one of the seven student outcomes that each ABET accredited engineering program must document is their students’ “ability to apply engineering design to produce solutions that meet specified needs with consideration of public health, safety, and welfare…” Controlling noise in the authors’ view is a fundamental strategy for protecting workers from occupational …

A Comparison Between Ultrasonic Guided Wave Leakage And Half-Cell Potential Methods In Detection Of Corrosion In Reinforced Concrete Structures, Ahmad Shoaib Amiri

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Corrosion of reinforcing steel bars (rebar) in reinforced concrete decks can lead to serious structural issues in bridges. Ultrasonic Testing (UT) methods provide small wavelengths that can be used for early detection of several types of deterioration. The recently-developed Ultrasonic Guided Wave Leakage (UGWL) Method utilizes steel as the waveguide and measures the energy leaked into the surrounding concrete. Previous studies completed at University of Nebraska-Lincoln demonstrated that the measurements of the leaked energy using receivers from the concrete surface can successfully identify early stages of various flaws such as corrosion, delamination, and cracking. In this method, the longitudinal waves …

Understanding The Impact Of Room Acoustic Conditions On The Kurtosis Levels Of Various Noise Signals, William Spallino

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Impulsive noise can be common in certain occupational and recreational settings, such as manufacturing plants, construction sites, and firing ranges. While many regulations and guidelines for noise exposure exist, their mathematical basis is stronger for continuous noise, and concerns have been raised about the possibility that impulsive noise may be more harmful to people’s hearing than those metrics would let on. Much work has been done on establishing metrics that accurately assess the severity and hearing risk associated with impulsive noise, but the effects of room acoustic conditions on those metrics have been heretofore understudied.

This study calculated room impulse …

An Iot Framework For Modeling And Controlling Thermal Comfort In Buildings, Fadi Alsaleem, Mehari K. Tesfay, Mostafa Rafaie, Kevin Sinkar, Dhaman Besarla, Parthiban Arunasalam

Durham School of Architectural Engineering and Construction: Faculty Publications

Humans spend more than 90% of their day in buildings, where their health and productivity are demonstrably linked to thermal comfort. Building thermal comfort systems account for the largest share of U.S energy consumption. Despite this high-energy cost, due to building design complexity and the variety of building occupant needs, addressing thermal comfort in buildings remains a difficult problem. To overcome this challenge, this paper presents an Internet of Things (IoT) approach to efficiently model and control comfort in buildings. In the model phase, a method to access and exploit wearable device data to build a personal thermal comfort model …

Evaluation Of The Dynamic Behavior Of Steel Staircases With Concrete Filled Pan Treads, Tyler Sondag

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Vibration serviceability of staircases has been a growing challenge for structural engineers due to changing materials and structural forms. In order to prevent or correct serviceability problems due to structural vibrations, structural engineers should be able to predict the dynamic performance of a staircase structure. However, there are few technical guides available for designing steel staircases, and the ones that do exist are often limited in their applications. Currently, there is a lack of research on staircases that are less prone to vibrations, such as staircases with concrete filled pans that are composed of face and wall stringers. Therefore, the …

Ten Questions Concerning Well-Being In The Built Environment, Sergio Altomonte, Joseph Allen, Philomena M. Bluyssen, Gail Brager, Lisa Heschong, Angela Loder, Stefano Schiavon, Jennifer A. Veitch, Lily M. Wang, Pawel Wargocki

Durham School of Architectural Engineering and Construction: Faculty Publications

Well-being in the built environment is a topic that features frequently in building standards and certification schemes, in scholarly articles and in the general press. However, despite this surge in attention, there are still many questions on how to effectively design, measure, and nurture well-being in the built environment. Bringing together experts from academia and the building industry, this paper aims to demonstrate that the promotion of well-being requires a departure from conventional agendas. The ten questions and answers have been arranged to offer a range of perspectives on the principles and strategies that can better sustain the consideration of …

The Impact Of Pev User Charging Behavior In Building Public Charging Infrastructure, Ahmad Almaghrebi

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Plug-in electric vehicles (PEVs) play a significant role in the development of green cities since they generate less pollution than conventional vehicles. To promote PEV adoption and mitigate range anxiety, charging infrastructure should be deployed at strategic locations that are readily accessible to the public. Nebraska is working on the expansion of charging infrastructure around the state; however, stakeholders face several difficulties in trying to minimize irregular charging behaviors. Most electric vehicle users plug in and leave their vehicles for an extended time at public parking lots designated for PEVs. Some users even leave their vehicles for longer than 24 …

An Investigation Of The Operational And Design Characteristics Of Circadian Lighting Systems, Aaron Adams, Iason Konstantzos

UCARE: Research Products

This report investigates the operation of circadian lighting systems to gain an understanding of the main design and control characteristics and to promote different objectives for use. Research is guided by asking how color intensity, color temperature and their temporal characteristics are related to the circadian response, and how this knowledge can be utilized when designing and operating lighting systems for indoor environments. This report features an extensive literature review and case study application cut short by the impact of the novel coronavirus. Future investigation and implementation is encouraged.

An Investigation Of The Operational And Design Characteristics Of Circadian Lighting Systems: Report, Aaron Adams, Iason Konstantzos

UCARE: Research Products

This report investigates the operation of circadian lighting systems to gain an understanding of the main design and control characteristics and to promote different objectives for use. Research is guided by asking how color intensity, color temperature and their temporal characteristics are related to the circadian response, and how this knowledge can be utilized when designing and operating lighting systems for indoor environments. This report consists of an extensive literature review and case study application cut short by the impact of the novel coronavirus. The case study takes place in an office space housed on the UNMC campus featuring an …

An Investigation Of The Operational And Design Characteristics Of Circadian Lighting Systems, Aaron Adams

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

This report investigates the operation of circadian lighting systems to gain an understanding of the main design and control characteristics and to promote different objectives for use. Research is guided by asking how color intensity, color temperature and their temporal characteristics are related to the circadian response, and how this knowledge can be utilized when designing and operating lighting systems for indoor environments. This report consists of an extensive literature review and case study application cut short by the impact of the novel coronavirus. The case study takes place in an office space housed on the UNMC campus featuring an …

Investigating Multidimensional Characteristics Of Noise Signals With Tones From Building Mechanical Systems And Their Effects On Annoyance, Joonhee Lee, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper investigates multidimensional characteristics of tonal noise from heating, ventilation, and air-conditioning systems, besides loudness and tonality, to improve prediction of annoyance. Two studies were conducted: multidimensional scaling (MDS) analysis to determine what other perceptual signal characteristics are important and perceptual weight analysis (PWA) to understand the impact of multiple tones in a signal. In the MDS study, paired comparison tasks were conducted to gather similarity and annoyance data. Results show that the latent perceptual dimensions are related to the signal’s tonality, loudness, sharpness, and roughness. Including metrics for these perceptions, except roughness, improves the performance of earlier annoyance …

A Novel Structural Health Monitoring Method For Reinforced Concrete Bridge Decks Using Ultrasonic Guided Waves, Ece Erdogmus, Eric Garcia, Ahmad Shoaib Amiri, Michael Schuller

Durham School of Architectural Engineering and Construction: Faculty Publications

This article presents the latest improvements in a recently developed nondestructive testing (NDT) approach for early detection of various flaws (corrosion, delamination, and concrete cracking) in reinforced concrete (RC) bridge decks. The proposed method involves the use of internal steel reinforcement as a wave guide for transmitting ultrasonic waves through the system and the measurement of leaked energy from the surface of the concrete. This paper builds upon the progress made in the previously published phases of the project and aims to further explore the capabilities and practicality of the proposed NDT method. Specifically, the limits of propagation distance, effect …