Architectural Engineering Commons^™

Wood Diaphragm Deflections. Part Ii: Implementing A Unified Approach For Current Clt And Wsp Practice, John Lawson

Architectural Engineering

Horizontal wood diaphragm systems, whether decked with conventional or mass timber panels, transfer wind and seismic loads to vertical elements of the lateral force-resisting system (LFRS), in flexible, rigid, or semi-rigid fashion. Characterizing and calculating the resulting diaphragm deflections determines the distribution of forces to critically loaded components and a significant portion of lateral building translations and rotations. Deflection equations for sheathed wood structural panel (WSP) diaphragms are well established in U.S. design standards in a 4-term expression that models flexural, shear, and fastener-slip deformations, but similar equations for cross-laminated timber (CLT) diaphragms have yet to unfold, despite growing industry …

Wood Diaphragm Deflections. Part I: Generalizing Standard Equations Using Mechanicsbased Derivations For Panel Construction, John W. Lawson, Scott Breneman, Marco Lo Ricco

Architectural Engineering

Horizontal wood diaphragm systems, whether decked with conventional or mass timber panels, transfer wind and seismic loads to vertical elements of the lateral force-resisting system (LFRS), in flexible, rigid, or semi-rigid fashion. Characterizing and calculating the resulting diaphragm deflections determines the distribution of forces to critically loaded components and a significant portion of lateral building translations and rotations. Deflection equations for sheathed wood structural panel (WSP) diaphragms are well established in U.S. design standards in a 4-term expression that models flexural, shear, and fastener-slip deformations and its full derivation using principles of mechanics is provided herein. Derivations of similar equations …

A Methodology For Converting An Engineering Program From Quarters To Semesters, Allen Estes, Brent Nuttall, Craig Baltimore, Peter T. Laursen, Michael James Deigert, Cole C. Mcdaniel

Architectural Engineering

California Polytechnic State University in San Luis Obispo has offered classes on the quarter system since its inception in 1946. In the Fall of 2021, the university was mandated to move to the semester system by Fall 2026. After researching the literature and interviewing universities that had made the same conversion in the past, it became apparent that no suggested methodology for making this conversion was available. This paper chronicles the conversion to semester effort to date and suggests a formalized methodology that other institutions can use if found in the same situation.

Some challenges are that initial information from …

Concrete Masonry Program (Cmd21) Usability, Allie G. Decker

Architectural Engineering

The Concrete Masonry Design Program, CMD21, can be utilized in the design of beams, columns, and walls, but this project focuses on the use of the program to analyze shear walls loaded in-plane. This report critiques and describes the learning process behind the CMD21 program.

The Leaf For Leaning Pine Arboretum, Maria Boyle, Shelby Holmquist, Andrew Duong

Architectural Engineering

The goal of this ARCE 415 senior project course was to create a shade structure that could be incorporated into The Leaning Pine Arboretum, located on campus at Cal Poly, San Luis Obispo. From start to finish, these three ARCE students took on the role of form-finders to form-testers to form-makers. We are putting the "architectural" back in architectural engineering as we reclaim the historical tradition of the engineer as the form finder. In many of our design labs we focused primarily on sizing members and analysis, just using a structure that the architect already had established. In this one-of-a-kind …

Physical And Digital Models For Timber Design And Analysis Courses, Paulina Robles, Gabrielle Rose Favro, Anahid Behrouzi, Abby Lentz

Architectural Engineering

Among structural engineering education research, there is a limited number of studies on interactive learning tools and activities specifically for the timber design classroom to assist students in visualizing material behavior, vertical and lateral load paths, and construction sequence. Timber design courses within the undergraduate program in the Architectural Engineering department at California Polytechnic State University in San Luis Obispo (Cal Poly), place an emphasis on seismic and wind design. Therefore, the proposed learning tools and activities are intended to pair with an introduction to concepts in the American Wood Council’s National Design Specifications (NDS) and Special Design Provisions for …

Sustainability In Concrete Masonry With Natural Pozzolans, Ceiley L. Davis

Architectural Engineering: Graduate Reports

To achieve greater sustainability in masonry construction for the Western market it is common to replace masonry grout's partial cement content with waste pozzolans. As waste pozzolans are in limited supply, as the coal burning market in the West diminishes, this research investigates viable grout mixtures which replace cement with Natural Pozzolans, a more plentiful sustainable replacement. The present work investigated the percentage of Natural Pozzolans that can be partially substituted for cement for grout mixtures to achieve an axial compressive strength of 2000psi within 28 and 56 days of curing. To determine efficacy per ASTM 476-22, “Standards Specifications for …

Mbesese Build 2023, Ben Stewart, Matthew Chung, Ian Mcconnell

Architectural Engineering

In collaboration with the Mbesese Initiative for Sustainable Developments, the senior project group from California Polytechnic State University of San Luis Obispo, researched, designed, and created construction documents for the Same Polytechnic College project in the town of Same, Tanzania. This project aims to combat poverty in the Kilimanjaro Region of Tanzania by providing education and infrastructure development. In 2023, the senior project group focused on completing a communal and educational space and addressing clean water scarcity through a rainwater collection system on the site of the future college.

Crescent: Proposed Arboretum Shade Structure, Hayle Jones, Ian Kelly, Emilie Phuong, Brooke Heitman

Architectural Engineering

This is a sunshade structure that uses shells as the facade to create the enclosing of this structure.

Xenabloom, Sophia Maglabe, Ryer Lauth, Elizabeth Shaw, Sheyna Rongong

Architectural Engineering

Proposal for an architectural and structural design of a shade structure at the Leaning Pine Arboretum, employing the Xenaform typology of Poly Shells, LLC.

Investigation Of Natural Pozzolans: Analyzing The Practicality Of Natural Pozzolans As A Partial Substitute For Cement In Grout Production, Jadyn I. Breien, Andrew J. Baro, Logan T. Marino

Architectural Engineering

This senior project aims to investigate whether natural pozzolans are more sustainable than fly ash and a sufficient substitute for cement in the production of grout. By following the intent of the ASTM (American Society of Testing and Materials) standards, a conclusion will be made to determine if natural pozzolans can contribute comparable strength in compression. The objective is to prove that natural pozzolans should be utilized in the production of grout rather than alternatives such as fly ash because it can provide similar strength while being more economical and more sustainable.

Polymöbi: Single-Surface Timber Polyshell Shade Structure, Ryan Khieu, Tom Sesin, Gabriel Garfias, Evan Brooks

Architectural Engineering

Overall design process of incorporating Polyshells into a sunshade structure, while addressing client needs, materiality, constructability, and life safety.

Arce 415 Portfolio: The Green Bird Of Paradise, Kristofer R. Rickansrud, Ryan Chan, Brendan Peers, Joel Santoyo

Architectural Engineering

A design project creating a Polyshell sunshade structure for the Leaning Pine Arboretum.

The Center For Centering Dome, Olek Piechaczek, Ryan M. Scharf

Architectural Engineering

The Center for Centering seeks to create a large-scale healing center, conducive to individual centering of the mind and body. This mobile installation provides a relaxing, enclosed space while still maintaining a connection to the outdoors. The clients liked the idea of having a pop-up installation that could be easily set up as a touring display. With a deadline for installation looming in June 2022, a team of students had five months to design and manufacture the structure.

In winter 2022, the students developed custom geometry to minimize the number of individual parts and built a ¼ scale model of …

Attainable And Sustainable Home Building Solutions, Katrina Matthews

Construction Management

Sustainability has fortunately been a recent concern in the construction industry as climate change continues to impose potentially insurmountable threats to the global environment. Although many new methods have been adopted in efforts to lessen the adverse environmental effects of construction-related activities, as a society, we still have much room for growth as the built environment accounts for almost 50% of global emissions. Many changes and standards must be adopted to make these solutions efficiently beneficial. To set industry standards, we must start with the most basic form of construction- residential building. This report covers two attainable framing solutions for …

Development Of The New Hasslein Caed Collaborative, Catie Dines

Construction Management

This paper outlines the development and execution of the new Hasslein CAED Collaborative student competition which engages students of all five majors in the College of Architecture and Environmental Design in a Request for Proposal style competition. CAED houses students studying Architecture, Architectural Engineering, City and Regional Planning, Construction Management, and Landscape Architecture. There is little opportunity for interdisciplinary collaboration within the CAED, despite our future career paths being heavily intertwined. This competition followed research by Greta Stout, class of 2022, on the benefits and support of interdisciplinary collaboration at Cal Poly SLO in CAED. The competition is named after …

Floating Dock At Santa Rita Ranch: A Design And Cost Estimate Package Prepared For The Land Conservancy Of San Luis Obispo, Sophia Ann Federico

Construction Management

The purpose of this project is to provide the Land Conservancy of San Luis Obispo with three design options for a floating fishing/boat dock system that they want to build on a small lake located on a plot of land that they own and preserve called Santa Rita Ranch. The design package that I created includes drawings, weight and buoyancy calculations, a cost estimate, and product specs. My approach was to utilize my estimating skills that I have acquired from my construction management classes and from my work at a general contractor’s office in the preconstruction department. The design and …

Sky Survey Radio Telescope, Jack E. Mcguigan

Electrical Engineering

This document outlines the design of a radio telescope designed to perform hydrogen line sky surveys. The telescope produces radio images mapping the intensity and relative velocities of hydrogen concentrations to their sky coordinates. Over the course of a day, the telescope images the regions of space visible to it, allowing sky survey imagery to be updated daily. Sky survey images are comprised of an array of pixels corresponding to specific sky coordinates. Each 8-bit RGB pixel contains information on the concentrations of hydrogen in the brightness and relative velocity in the color. Radio images mapping the concentrations and velocities …

Slo Botanical Garden Deck, Noah E. Demer

Architectural Engineering

This project consists of the design and construction of an outdoor-use deck. This deck is to be located in the NE corner of the Sage Meadow at the San Luis Obispo Botanical Garden at 3450 Dairy Creek Rd, San Luis Obispo, CA 93405. This deck’s intended use is as a gathering area for people to congregate. Originally, the ideal deck area was proposed as 700+ square feet, but with further site and project limitations the final design was ~480 square feet. This deck has not been constructed.

Precious Plastics - Plastic Brick Machine Fabrication, Timothy Ukaobasi Kanu, Evi Paraskevi Troulis

Architectural Engineering

The goal of this research is to determine the structural parameters of the recycled plastic polypropylene when molded into bricks resembling CMU blocks. To accomplish this, three mechanisms had to be assembled: the shredder, the injector, and the 1x1 mold. A tensile and compression test were to be performed on the plastic brick, and the values would be used to compare the tensile and compressive strength of PP plastic bricks, as well as their modulus of elasticity and stress vs. Strain performance. These values would be analyzed to determine whether it would be feasible to build an entire plastic wall. …

Construction Of High-Bay Lab Reaction Frame Foundations, David R. Bowen, Henry E. Miller, Blaize Twisselman

Construction Management

This paper details the construction process of two concrete modular foundations designed to meet specific design standards for various testing methods. The project, positioned within the California Polytechnic State University, San Luis Obispo (Cal Poly) High Bay Lab, will provide the Architectural Engineering (ARCE) and Construction Management (CM) departments with valuable insight into industry structural elements. The project required extensive forethought and thoroughness due to the complex designs, including 200 all-thread coupler attachments and a cumbersome rebar cage. This paper outlines the primary phases of construction, including material procurement and quality control, and discusses how the final product was obtained. …

Use Of Precious Plastic Method Of Bricks For The Construction Of Tiny Homes, Haylie E. Tallon

Architectural Engineering

Precious Plastics, a Netherlands based company, created an open source project that can be used to create different objects from recycled plastics. The San Luis Obispo area has a large amount of recyclable plastic that is being treated as trash, adding to the pollution of the ocean and the air. This project is to determine the necessary steps to create plastic building blocks, using the Precious Plastic process, as a construction material for low-income, temporary housing. This report covers the process that was used to build two of the machines that will be used to create the bricks. This requires …

Reciprocal Frames: The Flat Beam Grillage, Cesar Noe Jimenez Ramirez, Nicholas Sowatzke

Architectural Engineering

This report follows the pursuit of attaining information and researching academic resources regarding the elusive reciprocal frame structures throughout history, in particular the flat beam grillage. In the following pages, the reader should expect to learn about reciprocal frames in a historical context throughout the globe, as well as, gain insight on how to potentially analyze these frames when they span two-dimensionally. As seen in Figure 1 (Pugnale 2011) and Figure 2 (Godthelp 2019), reciprocal frame structures consist of multiple groups of three or more members that are mutually supported. Along the perimeter of the structure, the members are supported …

Increased Strength And Stiffness In Plywood Shear Walls Through Steel Straps, Mike Deigert, Elizabeth Claypool, Michelle Dennin, John W. Lawson

Architectural Engineering

In a recent iteration of an upper-division engineering design lab course at Cal Poly SLO, students were challenged to identify and understand the probable failure mechanism of conventionally built plywood shear walls and hypothesize how they could delay or prevent common failure mechanisms to increase the overall lateral load carrying capacity. After observing the results of a test on a conventional, code specified wall, a solution to integrate metal gauge strapping into edge nailing was developed to address the common failure mechanisms of nail head pull through and panel edge tear out. A shear wall with metal strapping installed between …

Leveraging Lessons Learned From A Virtual Hands-On Outreach Program To Cultivate Diversity In The Next Generation Of Structural Engineers, Anahid Behrouzi, Nicole Buck, Sarah Navias

Architectural Engineering

A challenge that continues to face the structural engineering (SE) profession is the recruitment and retention of individuals from underrepresented minority (URM) groups, underscored over the years by findings reported on by the SE3 project committee. One approach to address this is by developing and conducting early outreach efforts with diverse populations of K-12 students, so they are aware of SE’s meaningful contributions to society and the intriguing technical problem- solving opportunities in this field. During these educational activities it is also important for young students to be exposed to engineering practitioner-educators who represent diverse backgrounds and whose lived experience …

A Parametric Study Of The New Wood Diaphragm Design Force Methods, John Lawson, Emily Taylor

Architectural Engineering

Since the introduction of seismic design provisions in U.S. building codes and standards, a single generally-accepted method has existed for determining seismic design forces on diaphragms. Recently, an alternate procedure was introduced in the Minimum Design Loads and Associated Criteria for Buildings and Other Structures (ASCE 7-16) (ASCE, 2016), and an additional alternate procedure is introduce in its next edition ASCE 7-22 (ASCE, 2022) for single-story rigid-wall flexible-diaphragm (RWFD) buildings. Suddenly the determination of seismic diaphragm forces has become a much more complex choice. The two newer alternate methods are based on better predictive modeling research; however, it is of …

Timber Buckling Restrained Brace, Faith Sharp, Armando Castaneda Jr

Architectural Engineering

The timber buckling-restrained brace (TBRB) experiment at California Polytechnic State University, San Luis Obispo (Cal Poly), began in 2018 with the goal of finding whether timber may provide proper restraint against buckling of a steel brace. The TBRB was motivated by the limited lateral force resisting systems (LFRS) available for low-to-mid-rise, type V construction; this system would provide strength and ductility at a scale and level of cost appropriate to timber construction.

Early research consisted of uniaxial component testing, where researchers played with the balance between the core brace design and utilization of timber casings for buckling restraint, with minimal …

Hands-On Earthquake Engineering Curriculum For The Virtual Classroom, S. Navias, N. Buck, Anahid A. Behrouzi

Architectural Engineering

During Summer 2021, five week-long virtual earthquake engineering sessions were offered in the Cal Poly Engineering Possibilities in College (EPIC) summer program. Typically, this is a residential program comprised of faculty-led workshops in various engineering fields to provide pre-college experiences to students, particularly from underrepresented backgrounds. The challenge posed by remote learning, due to the global pandemic, was to continue providing educationally effective hands-on activities. To accomplish this, the instructor team designed, fabricated, and shipped over 120 mail-home engineering kits for students to assemble a shake table, build and retrofit a structural model, as well as collect and analyze data …

Asce's Response To The Pandemic: Execution Of A Remote Exceed Teaching Workshop, Kelly Salyards, Allen Estes, Camilla M. Saviz, Patricia Clayton, Julian Ly Davis, Corinna Marie Fleischmann, Tonya Lynn Nilsson, Pinar Omur-Ozbek, Fethiye Ozis, Monica Palomo, Carolyn M. Rodak, Cassandra Rutherford, Cristina Torres-Machi, Dion Karean Coward, Leslie Nolen

Architectural Engineering

The American Society of Civil Engineers (ASCE) Excellence in Civil Engineering Education (ExCEEd) Teaching Workshop (ETW) started in 1999 and has produced 1035 graduates from 266 colleges and universities throughout the world. ASCE has conducted 44 week-long, inperson workshops without interruption for over two decades. The ExCEEd graduates returned to their home universities and applied the lessons of this workshop to the classes they teach. The details and long-term benefits of the ETW have been reported in many venues.

In Spring 2020, the COVID-19 pandemic swept the nation and remained a persistent threat throughout 2021. As a result, the in-person …

Designing With Force-Transfer Shear Walls: A Stiff Task To Achieve Better Performance And Cost Savings, Michael Deigert, John W. Lawson

Architectural Engineering

Wood-framed structural panel shear walls designed using the Force Transfer Around Openings (FTAO) method have become a very popular option for engineers, especially in areas with high lateral force requirements. The need for more affordable housing in metropolitan areas is leading to larger and taller multi-family residential buildings, and these typically wood-framed structures can benefit from the innovative approach behind FTAO design methodology. But do engineers have all the tools they need to accurately determine the stiffness of these walls and the associated lateral force required for their design.