Architectural Engineering Commons^™

Numerical Simulation Of Centrifuge Tests On Homogeneous And Heterogeneous Soil Models, Pradipta Chakrabortty, Radu Popescu

Architectural Engineering

Soil liquefaction is a major cause of seismic damage in cohessionless soil during earthquakes. From past numerical and experimental research it has been observed that more excess pore water pressure (EPWP) is generated during earthquakes in a heterogeneous soil deposit than in the corresponding homogeneous soil with relative density equal to the average relative density of the heterogeneous soil. This interesting phenomenon is investigated here, by numerically simulating centrifuge experiments of seismically induced soil liquefaction using the finite element code DYNAFLOW. Two centrifuge tests are numerically simulated here: one in homogeneous soil and another in heterogeneous soil. Recorded experimental results …

Developing Dendrifrom Facades Using Flow Nets As A Design Aid, Jonas H. Houston

Master's Theses

This thesis highlights a method of arriving at form that minimizes the need for high end technology and complex mathematical models, yet has structural principles of load flow at the highlighted methods core. Similar to how graphical statics assisted earlier architects and engineers to arrive at form by relating form and forces, this thesis suggests a method of form finding that relates the flow of stresses within solid masses to possible load-bearing façades. Looking to nature, where an abundance of efficient structural solutions can be found, this thesis focuses on a tree-like structural form called the dendriform. In doing so, …

Verification And Expansion Of Single-Degree-Of-Freedom Transformation Factors For Beams Using A Multi-Degree-Of-Freedom Non-Linear Numerical Analysis Method, Takayuki Yokoyama

Master's Theses

The single-degree-of-freedom (SDOF) transformation factors as tabulated in John Biggs’ textbook (Biggs 1964) are accepted as the equivalent factors for simplifying and analyzing a component's response to blast. The study validates the stiffness and mass transformation factors through multi-degree-of-freedom (MDOF) numerical methods. After validating the transformation factors, the MDOF numerical method is used to create new stiffness and mass transformation factors for loading cases not already included in Biggs’ textbook.

The validated factors, as well as the newly developed factors are used in SDOF analyses. The deflections from the SDOF responses accurately predict the MDOF responses as long as the …

Investigating Pipeline–Soil Interaction Under Axial–Lateral Relative Movements In Sand, Nasser Daiyan, Shawn Kenny, Ryan Phillips, Radu Popescu

Architectural Engineering

This paper presents results from an experimental and numerical study on the axial–lateral interaction of pipes with dense sand. A series of centrifuge tests were conducted, with a rigid pipeline displaced in the horizontal plane in a cohesionless test bed. The relative pipe–soil interaction included axial, lateral, and oblique loading events. A three-dimensional continuum finite element model was developed using ABAQUS/Standard (Hibbitt et al. 2005) software. The numerical model was calibrated against experimental results. A parametric study was conducted, using the calibrated finite element model to extend the investigations. The ultimate axial and lateral soil loading was found …

Mixing Numbers And Letters: Collaboration Between Engineering And English To Improve Graduate Student Work, Craig Baltimore, Deborah Wilhelm, Mary Forte, Pamalee Brady

Architectural Engineering

This paper will describe the issues and process of developing an introductory course in graduate writing and communication skills in conjunction with the industry of professional consulting engineering. The course was developed through a collaboration of English and engineering faculty and the collaboration is maintained in the teaching of the course. Innovative techniques incorporated into the course development include a four-pronged approach: 1) use of best practices for Writing in the Disciplines; 2) development of and focus on a multi-faceted collaborative model (Engineering and English, university and industry, students and faculty, industry and students); 3) team-teaching by engineering and English …

Interdisciplinary Design: The Saga Continues, Brent Nuttall, Jill Nelson, Allen Estes

Architectural Engineering

The College of Architecture and Environmental Design at California Polytechnic State University, San Luis Obispo is the only college in the nation that has departments of Architecture, Architectural Engineering and Construction Management in the same college. The institution has a 60 year tradition of collaboration between the engineering, architecture and construction disciplines, particularly at the lower division level. To enhance this collaboration, the college committed to providing an upper division interdisciplinary experience to every student in the form of a project based, team oriented five unit studio that every student would take. This new course, launched in 2009, requires small …

How The New Architectural Engineering Program Criteria Differs From The New Civil Engineering Program Criteria, Allen Estes

Architectural Engineering

There are 17 ABET accredited architectural engineering (AE) programs in the country and over 200 civil engineering (CE) programs. To gain accreditation, a program must meet the ABET general criteria common to every engineering program and specific criteria that are unique to an individual program. The American Society of Civil Engineers is the lead professional society in this effort for both CE and AE programs. Recently the Civil Engineers rewrote and implemented the Civil Engineering ABET Program Criteria to incorporate changes in the ABET general criteria, the publication of the Civil Engineering Body of Knowledge I, and the work accomplished …

International Sustainability Through Knowledge Transfer Considering Culture And Resources – Sledgehammer Attacks On Adobe Masonry Walls, Craig V. Baltimore, David Lambert

Architectural Engineering

In terms of knowledge and technology innovation, sustainability is defined as the ability for a society or culture to develop, incorporate and maintain knowledge and technology in a long term manner without continued outside input. In rural East Africa, the prevalence of low-cost building materials and unskilled labor produce buildings that provide poor security for charitable groups working to improve the quality of life for communities and individuals there. Medicine and other medical supplies are targeted by thieves for their high value. Buildings constructed of the most common building material in the region, adobe masonry, are easily broken into by …

In-Plane Cyclic Shear Performance Of Interlocking Compressed Earth Block Walls, David William Bland

Master's Theses

This thesis presents results from testing of interlocking compressed earth block (CEB) masonry shear walls.  CEBs are low strength earth masonry units sometimes stabilized with cement or lime.  The interlocking compressed earth blocks (ICEBs) used in this experiment are dry stacked interlocking hollow units, which can be reinforced and grouted after they are laid.  Although significant research has been undertaken to optimize the material properties of CEBs, little has been done to investigate the performance of structural systems currently being built using this technology.

Test results are reported for three 1800 mm x 1800 mm wall specimens constructed with cement …

Forced Vibration Testing And Analysis Of Pre- And Post- Retrofit Buildings, Erica Dawn Jacobsen

Master's Theses

ABSTRACT

Forced Vibration Testing and Analysis of Pre- and Post- Retrofit Buildings

Erica Dawn Jacobsen

The primary goal of the thesis was to detect the retrofit through vibration testing of both buildings.  The secondary goal focused on correctly identifying the behavior of the building through FVT, comparing that behavior to computational model predictions, and determining the necessary level of detail to include in the computational modeling.  Forced vibration testing (FVT) of two stiff-wall/flexible-diaphragm buildings yielded natural frequencies and mode shapes for the two buildings.  The buildings were nearly identical with the exception that one had been retrofitted.  Both buildings were …

Using The Hyatt Regency Skywalk Collapse Case Study In Engineering Education., John W. Lawson, Pamalee A. Brady

Architectural Engineering

To this day, the 1981 skywalk collapse in the Kansas City Hyatt Regency resulted in the worst loss of life from a structural engineering mistake in United States history. While many important engineering lessons can be drawn from this disaster, it is just as important to recognize the broader lessons learned in the design and construction process as a whole that can be successfully brought into the classroom. Numerous organizations have undertaken the task of envisioning how engineering education can meet the demands of the future. ABET’s baccalaureate degree accreditation criteria, ASCE’s Body of Knowledge and Body of Knowledge 2 …

Asce 7–05 Design Rule For Relative Strength In A Tall Buckling-Restrained Braced Frame Dual System, Lisa J. Aukeman

Master's Theses

In mid- to high-rise structures, dual systems (DS) enable a structural designer to satisfy the stringent drift limitations of current codes without compromising ductility. Currently, ASCE 7-05 permits a variety of structural systems to be used in combination as a dual system yet the design requirements are limited to the following statement: Moment frames must be capable of resisting 25% of the seismic forces while the moment frames and braced frames or shear walls must be capable of resisting the entire seismic forces in proportion to their relative rigidities.

This thesis assesses the significance of the 25% design requirement for …

Universal Engineering Programmer – An In-House Development Tool For Developing And Testing Implantable Medical Devices In St. Jude Medical, Khoa Tat Do

Master's Theses

During development and testing of the functionality of the pacemaker and defibrillator device, engineers in the St. Jude Medical Cardiac Rhythm Management Division use an in-house development tool called Universal Engineering Programmer (UEP) to ensure the device functions as expected, before it can be used to test on an animal or a human during the implantation process.  In addition, some applications of UEP are incorporated into the official releases of the device product.  UEP has been developed and used by engineers across departments in the St. Jude Medical Cardiac Rhythm Management Division (CRMD).  This thesis covers the flexible and reusable …

Using Case Studies To Characterize The Broader Meaning Of Engineering Design For Today’S Student, Pamalee A. Brady, John W. Lawson

Architectural Engineering

Numerous organizations have undertaken the task of envisioning the education required to meet the engineering demands of the future. The ABET study EC2000, ASCE’s Civil Engineering Body of Knowledge and Body of Knowledge 2 and the National Academy of Engineering have documented the need to change engineering education from its historical focus on technical content knowledge to include greater emphasis on professional issues and to integrate engineering practice into education. To this end teaching methods such as project-based learning, and the use of case studies are being explored to address these broader learning outcomes. Case studies in particular facilitate telling …

Nonlinear Modeling Of A Sustainable Material, Jorien Gill Baza

Master's Theses

This study developed a nonlinear constitutive model for a sustainable orthotropic material. Existing methods for constitutive models of wood were improved upon to include the nonlinear stress-strain response not only in the two orthogonal axes but at any orientation to the strong axis of the material. This method also simplifies the nonlinear stress-strain relationships into bilinear stress-strain curves which can be valuable in hand calculations as well as finite-element analyses. The effectiveness of the proposed constitutive model is demonstrated by comparing bilinear stress-strain predictions to experimental data.

An Investigation Of The Influence Of Diaphragm Flexibility On Building Design Through A Comparison Of Forced Vibration Testing And Computational Analysis, Blake Alan Roskelley

Master's Theses

An assessment of the validity of idealizing a concrete diaphragm as rigid was performed through the modal analysis of three existing buildings. Modal analysis was performed both by physical experimentation and computational analysis. Experimental determination of the mode shapes shows that two of the three buildings’ diaphragms exhibited flexible behavior. The experimental results were compared to computational analysis results and were shown to be similar, confirming that that the two building diaphragms are not rigid. As a standard, diaphragms with aspect ratios less than three are permitted to be idealized as rigid per ASCE 7-05. To determine the effect of …

Urban Architecture For Rural East Africa: A Sustainable Solution, Craig Baltimore

Architectural Engineering

No abstract provided.

New Code Changes Under The 2009 Ibc, John W. Lawson

Architectural Engineering

The evolution of building codes typically produce design provisions that are expected to create safer and more accurate designs. We as engineers expect building codes to advance the state of the art with each successive edition. The 2009 International Building Code (IBC) and the Building Code Requirements for Structural Concrete (ACI 318-08) have significant revisions affecting the design of tilt-up buildings, but in some cases not necessarily advancing the state of the art. For example, the latest ACI 318 edition is largely revising slender wall design back to match equations found in the old 1997 UBC. In addition, the latest …

Lessons Learned In Sustainable Information And Technology Transfer Considering Culture And Resources, Craig V. Baltimore

Architectural Engineering

In terms of information and technology transfer, sustainability is defined as the ability for a society (or culture) to maintain and incorporate the information and technology in a long term manner without continued outside influence. When a major disaster occurs, like the recent Haiti earthquake, the good intentioned outside relief effort is often immediate with no lasting effects. For example, to have a new building built out of precast panels engineered and manufactured in the U.S., and erected with volunteers from outside of Haiti, will immediately provide for the local community. But will have the people learned in terms of …

Knowledge Transfer And Adobe Block, Craig Baltimore

Architectural Engineering

No abstract provided.

Liquefaction Study Of Heterogeneous Sand: Centrifuge, Pradipta Chakrabortty, Radu Popescu, Ryan Phillips

Architectural Engineering

From past numerical research and small scale laboratory tests, it has been observed that more excess pore water pressure (EPWP) is generated during earthquakes in a heterogeneous sand deposit than in the corresponding homogeneous sand with relative density equal to the average relative density of the heterogeneous sand. This interesting phenomenon is investigated here in large scale experiments using geotechnical centrifuge modeling techniques. A series of liquefaction tests have been conducted at C-CORE’s geotechnical centrifuge facility: Two on variable sand and one on uniform sand deposits. A one level frame structure resting on two strip footings was also placed on …

Interdisciplinary Design: The Good, The Bad, And The Ugly, Jill Nelson, Brent Nuttall, Allen Estes

Architectural Engineering

Today’s students are faced with far different challenges upon graduation than those encountered in past years. One of the most significant of these challenges is the need to work within the framework of integrated project delivery where all disciplines work as a cohesive team to produce a project. In 2004, the Construction Management Department at California Polytechnic State University in San Luis Obispo,CA began teaching a three credit hour design/build course focused on integrated project delivery. That course, taught primarily to construction management students, has now evolved into a true interdisciplinary experience that is taught in a team environment by …

Exceed Ii: Advanced Training For Even Better Teaching, Debra Larson, Allen Estes, Norman Dennis, Ronald Welch, Carol Considine

Architectural Engineering

In 2007, the American Society of Civil Engineering’s Committee on Faculty Development (CFD) conducted a longitudinal survey of all the past participants of the ExCEEd Teaching Workshop (ETW). The CFD received 173 responses, representing 40% of the ETW population at that time, to its survey about skills and the long term value of ETW. Important to this paper, 73% of the survey respondents said that they were interested in attending a post, advanced ETW. Motivated by these survey results, the CFD began its planning for a pilot ExCEEd II workshop during the 2008-2009 academic year. In the summer of 2009, …

Gender Representation In Architectural Engineering - Is It All In The Name?, Pamalee Brady, Allen Estes

Architectural Engineering

Under-representation of women in engineering is of concern as the decreasing supply of qualified engineers continues to plague the nation’s advancement. Understanding what factors influence choices of engineering disciplines has the potential for altering education to accommodate a more diverse student body that can be successful in engineering. University statistics reflect that the Architectural Engineering program at this school is comprised of 35% women, while the other engineering programs attract at best 20% women and at worst 5% women. The Architectural Engineering program at this university is in fact one of the most intense structural engineering programs in the country …

How And What To Communicate For Efficient Joist Design, John Lawson, Bruce Brothersen

Architectural Engineering

No abstract provided.

Identification Of Physical Changes To A Steel Frame, Daniel Eric Means

Master's Theses

The thesis utilized physical testing and computer modeling to determine the feasibility of identifying a change to the mass or stiffness of a steel frame. Physical testing was performed using an accelerometer, linear shaker, and arbitrary function generator. Two methods of laboratory testing were developed: ambient vibration testing (AVT) and forced vibration testing (FVT). AVT was able to preliminarily identify the natural frequencies and mode shapes of the frame. FVT was able to precisely identify four distinct natural frequencies, mode shapes, and damping ratios. The baseline frame then underwent two physical changes: the addition of mass to its roof, and …

A Solution To Seismic Bracing Restrictions, John W. Lawson

Architectural Engineering

No abstract provided.

Concrete Slender Wall Design – Back To The Future, John W. Lawson, James Lai

Architectural Engineering

Slender concrete walls incorporated into tilt-up construction
over the past 60 years have performed remarkably well under
out-of-plane wind and seismic loads. While issues associated
with seismic wall anchorage gave this form of construction a
black-eye in the early days, the concrete walls themselves
have always performed very well even as far back as their
first use in the early 1900s. Yet the height-to-thickness
limitations in 1985 and earlier model building codes were
proved irrational and were removed. We as engineers expect
building codes to evolve and advance the state of the art with
each successive edition. The latest edition …

Performance Based Analysis Of Steel Buildings, Matthew Joseph Williams

Master's Theses

This project investigated the performance of two separate building types, designed using ASCE 7-05, using the analysis procedures from ASCE 41-06. The results from the ASCE 41-06 analyses were compared to the expected performance level of Life Safety to determine the adequacy of the ASCE 7-05 design. ASCE 7-05 is intended to result in designs that perform to a Life Safety performance level regardless of the building type. A design using the AISC specifications for a steel Special Moment Frame and the lateral loads from ASCE 7-05 resulted in a building that slightly exceeded an Immediate Occupancy performance level for …

Material Sustainability, Jessica Meadows, Natasha Morris

Architectural Engineering

This paper addresses the sustainability of the materials used to construct buildings today. Timber, concrete and steel are analyzed for carbon output, cost, and recyclable-ability.