Architectural Engineering Commons^™

An Intelligent Virtual Design Studio (Vds) For Integrative Design Of Green Buildings, Zhaozhou Meng

Dissertations - ALL

The overall goal of the study was to develop a "Virtual Design Studio (VDS)": a software platform for integrated, coordinated and optimized design of green building systems with low energy consumption, high indoor environmental quality (IEQ), and high level of sustainability. My dissertation research was focused on the development of a key VDS component -- an integrated design process and a near-real time performance simulation approach for fast feedbacks at the early stage of the integrated design process.

A design process module "Magic Cube" (MC) was developed for the VDS as the core for the design integration and coordination. It …

An Intelligent Virtual Design Studio (Vds) For Integrative Design Of Green Buildings, Zhaozhou Meng

Dissertations - ALL

The overall goal of the study was to develop a “Virtual Design Studio (VDS)”: a software platform for integrated, coordinated and optimized design of green building systems with low energy consumption, high indoor environmental quality (IEQ), and high level of sustainability. My dissertation research was focused on the development of a key VDS component -- an integrated design process and a near-real time performance simulation approach for fast feedbacks at the early stage of the integrated design process.

A design process module “Magic Cube” (MC) was developed for the VDS as the core for the design integration and coordination. It …

Computational Analysis Of High Carbon Steel For Optimal Design, Muhammad Zubair, Aneela Wakeel, M. Mustafa Azeem, Aneeqa Tabbassum

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

To increase the reliability of materials the computational analysis has been considered a vital tool for designing the components in the mechanical and nuclear engineering. By increasing a high percentage of carbon in liquid steel subsequently enhance the hardness, elasticity and toughness of the materials. In this research high carbon steel has been used due to its wear resistance properties in order to increasing hardness and strength. The findings of this research reveal the high carbon steel a good replacement material for conventional iron due to its low weight. Modeling and analysis of the steel, metallic glass and high carbon …

Effectiveness Of Building Systems Strategies For Mitigation Of Airborne Transmission Of Sars-Cov-2, Meng Kong, Jialei Shen, Bing Dong, Jianshun Jensen Zhang

Mechanical and Aerospace Engineering - All Scholarship

Airborne transmission has been recognized as a major transmission pathway for the infectious disease COVID-19. This study investigated the effectiveness of several indoor air quality (IAQ) control strategies on the mitigation of airborne transmission of SARS-CoV-2, the virus that causes COVID-19. The well-known airborne disease infection risk model (Wells-Riley equation) was used to estimate the infection risk of the SARS-CoV-2 in seven (7) different types of spaces including conference center/ballrooms, hotel bistro//cafeteria, hotel lobby, classrooms (lecture), conference room/small classroom, hotel or cruise ship guest rooms and open plan offices. The IAQ control strategies included increased ventilation rate, improved air distribution …

Leveraging Abet Accreditation To Promote Inclusion Of Noise Control Engineering Concepts In Engineering Programs, Lily M. Wang, Bryan Beamer

Durham School of Architectural Engineering and Construction: Faculty Publications

Accreditation Board for Engineering and Technology, Inc. (ABET) accreditation is an internationally recognized system ensuring consistency and quality in engineering education programs. As a part of ABET accreditation, there is no set requirement for any general engineering program to include noise control engineering concepts in their curricula. However, one of the seven student outcomes that each ABET accredited engineering program must document is their students’ “ability to apply engineering design to produce solutions that meet specified needs with consideration of public health, safety, and welfare…” Controlling noise in the authors’ view is a fundamental strategy for protecting workers from occupational …

Semi Open Partitions: A Defense Strategy For Airborne Disease, Kerrie Marshall, Arik Palileo, Eric A. Schiff

SyracuseCoE

This brief summarizes research on two measures that reduce the risk of transmitting COVID-19 from an infected person to a virus-free individual. Semi-partitioned spaces can reduce airborne disease transmission when combined with a proper ventilation flow pattern in a room. With advanced displacement ventilation risk can be reduced by at least 4 times.

Analysis Of Burning Wood In The Transient State And The Application To Structural Design, Roberta Veliz, Kimberly Guzman

Architectural Engineering

Determining the extent of the contribution of exposed timber on compartment fire dynamics in open floor plans is a complex process. Designers traditionally used compartmentalization design methods which create spaces where flashover is likely, given the fuel load and ventilation conditions. However, due to the large geometric dimensions and spread of fuel, fires in open floor plans are more likely to remain as localized or traveling fires. As such, an understanding of not only ignition potential but also flame spread is critical to characterizing the contribution of exposed timber. An integral step in characterizing the potential contribution is through an …

Dislocation-Oxide Interaction In Y2o3 Embedded Fe: A Molecular Dynamics Simulation Study, M. Mustafa Azeem, Qingyu Wang, Zhongyu Li, Yue Zhang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Oxide dispersed strengthened (ODS) steel is an important candidate for Gen-IV reactors. Oxide embedded in Fe can help to trap irradiation defects and enhances the strength of steel. It was observed in this study that the size of oxide has a profound impact on the depinning mechanism. For smaller sizes, the oxide acts as a void; thus, letting the dislocation bypass without any shear. On the other hand, oxides larger than 2 nm generate new dislocation segments around themselves. The depinning is similar to that of Orowan mechanism and the strengthening effect is likely to be greater for larger oxides. …

Competence Of A Spray Passive Down-Draft Evaporative Cooling (Pdec) System For Space Cooling, Daeho Kang, Richard K. Strand

Publications and Research

A spray PDEC system has been relatively less considered than other passive cooling strategies as one of the viable low-energy solutions in the cooling of buildings while having a great potential in energy savings. This study is intended to evaluate the capability of a spray PDEC system for space cooling. It comprises four simulation scenarios to see the system response and influence of indoor thermal environment when a spray PDEC system is adopted as a primary cooling system in two different climates. The simulation results show that a spray PDEC system causes a substantial variation in the indoor thermal environment …

Quantification Of Heat Flows Through Building Entrance Doors On A Winter Day, Daeho Kang

Publications and Research

The current methods for the prediction of the heat flow through building entrance doors have been used for years while involved with a certain degree of uncertainty. This paper describes an experimental method that accurately quantified such heat flow. The experiment monitored local environmental parameters in a college building on a cold winter day. The results of the experiment demonstrated that the experimental method is viable to accurately estimate the heat flow throughout the entrance doors and the presence of a vestibule moderated heat losses from the conditioned area. The results will be used for validating the existing methods.

Analysis Of The System Response Of A Spray Passive Downdraft Evaporative Cooling System, Daeho Kang, Richard K. Strand

Publications and Research

A spray Passive Downdraft Evaporative Cooling (PDEC) system achieves great savings for space cooling and improves indoor environmental quality by supplying a large amount of fresh outdoor air. As previous studies heavily focused on the energy saving capability of a spray PDEC system due to lack of methods for a detailed analysis, the influence of cool humid supply air from a spray PDEC system in a space in buildings has not been comprehensively studied. This study is intended to evaluate the competence of a spray PDEC system as a primary cooling system in typical spaces in a primary school building …

Reduce, Reuse, Reengineer, Neil Ryan Robertson, Anthony James Beers

Architectural Engineering

Our senior project is a research exploration of renewable energy. We recognized there is a major need in the world for the advancement of green power sources. For our project, we wanted to go beyond what we have learned in our Cal Poly architectural engineering classes and to use some of our own creativity to investigate the possibilities of renewable energy from a structural perspective. The guiding question we asked ourselves was, “as architectural engineering students, how could we shift our world to use more renewable energy?” To start our journey off, was the original inspiration from the work of …

Design And Fabrication Of Automatic Single Axis Solar Tracker For Solar Panel, Ghazanfar Mehdi, Naveed Ali, Shafquat Hussain, Asad A. Zaidi, Ahmer Hussain Shah, M. Mustafa Azeem

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Sun energy is a considered to be one of most promising sources to address the world energy crises. Photovoltaic cell is one of the prominent sources of energy. The most important factors that affect the efficiency of solar cells are cell temperature, maximum power point tracking (MPPT) and energy conversion efficiency. The optimization of these factors improves solar cells efficiency for more reliable applications. This study associated by means of the designing and manufacturing process of single axis tracker device by using photo voltaic conversion panels. This solar tracker system assures the conversion optimization of electricity from the source of …

Ua66/1/5 Ogden College Of Science & Engineering Dean's Office Centers, Wku Archives

WKU Archives Collection Inventories

Records created by and about centers associated with the Dean's office in the Ogden College of Science & Engineering.

Atomistic Simulations Of Nanoindentation Response Of Irradiation Defects In Iron, M. Mustafa Azeem, Qingyu Wang, Muhammad Zubair

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Radiation response of a material is a consequence of defects' evolution in any radiation damage event. The radiation-induced defects can significantly alter the mechanical properties of a material. Radiation damage initiates from incident neutron by bombardment on solid material causing production and evolution of Frenkel defects. Since voids are formed due to aggregation of a large number of vacancies that cause dimensional changes and hence irradiation-induced swelling. In order to characterize the effect of irradiation defects, we have performed molecular dynamics (MD) simulations to investigate nanoindentation response of point defects and voids in Fe and their effects on mechanical parameters. …

My Catalyst, Gabrielle Gambino Lyon

Celebration of Learning

Over the course of my internship and shadow program with Pepper Lawson Construction and Ziegler Cooper Architects, I was able to explore the various career paths involved in the design, construction, and civil engineering fields. My work on the construction site of a high-rise apartment building located in the heart of Houston, TX allowed me first-hand experience working and learning alongside project engineers, contractors, building developers, and the construction team.

This project was the perfect confluence of my main areas of interest: structural, mechanical, civil, and environmental engineering, as well as architecture. My daily work consisted of on-site walk throughs, …

Molecular Dynamics Simulation Study On The Possible Factors Affecting Stability Of Ods Steel, M. Mustafa Azeem, Zhongyu Li, Qingyu Wang, Abid Hussian

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Oxide-dispersed-strengthened (ODS) steel has excellent mechanical, thermodynamic and radiation resistant properties, which makes it an important candidate material for high-Temperature reactors applications. Radiation stability of oxide is very important to study at the atomic level. In present case molecular dynamics (MD) simulation is used to study stabilities of Y₂O₃ particles in ODS steel as a function of particle sizes. The size dependence is obvious for particle sizes larger than 2.8 nm. Furthermore, the stabilities depend on charges of Y and O atoms.

Development Of A Model To Predict The Likelihood Of Complaints Due To Assorted Tone-In-Noise Combinations, Joonhee Lee, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper develops a model to predict if listeners would be likely to complain due to annoyance when exposed to a certain noise signal with a prominent tone, such as those commonly produced by heating, ventilation, and air-conditioning systems. Twenty participants completed digit span tasks while exposed in a controlled lab to noise signals with differing levels of tones, ranging from 125 to 1000 Hz, and overall loudness. After completing the digit span tasks under each noise signal, from which task accuracy and speed of completion were captured, subjects were asked to rate level of annoyance and indicate the likelihood …

Classical Molecular Dynamics Study For Defect Sink Behavior In Oxide Dispersed Strengthened Alloys, M. Mustafa Azeem, Zhongyu Li, Qingyu Wang, Qazi Muhammad Nouman Amjad, Muhammad Zubair, O. M.H. Ahmed

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Oxide Dispersed Strengthened (ODS) alloys are considered as a potential candidate for future generation reactors and can even be graded as better radiation resistant materials than the ones already in use. Molecular dynamics (MD) simulation study for defect sinks properties of ODS alloys have been investigated at 700K using LAMMPS (Atomic/Molecular massively parallel simulator software. SRIM (stopping range of ions in matter) code was used to see the approximate range of the ions and damage cascade profile. It has been observed that the oxide particle attracts vacancies/interstitials produced in the base matrix near the interface. The modeled structure looked amorphous …

Performance Control Of A Spray Passive Down-Draft Evaporative Cooling System, Daeho Kang, Richard K. Strand

Publications and Research

A spray passive down-draft evaporative cooling system has been regarded as a low-energy cooling system that leads significant energy savings in the cooling of buildings. While the energy saving capability of the system has been proven, the ability to control a comfortable indoor environment is still inadequate due to strong climatic dependency. This study seeks viable solutions to advance the control competence of the system by mitigating critical problems of the system to be a reliable cooling application in the cooling of buildings. It proposes potential control strategies for the system and alternative operations. It develops a control algorithm for …

A Method For Selecting Hvac Retrofit Solutions For Existing Small- And Medium-Sized Commercial Buildings, Bonggil Jeon

Open Access Dissertations

The primary purpose of the present study is to develop a framework and methodology for evaluating appropriate Heating, Ventilating, and Air Conditioning (HVAC) retrofit solutions that can be effectively retrofitted into different types of small- and medium-sized commercial buildings (SMSCB). Additionally, development of an advanced data-driven decision-making tool is introduced as a benefit of proposed framework. In recent years, considerable attention has been focused on retrofits of existing commercial buildings (IBE, 2013b). In fact, the Commercial Building Energy Consumption Survey (CBECS) 2003 (EIA, 2006) indicates that over 70% of existing commercial buildings across the United States are more than twenty …

Case Study Of Quantifying Energy Loss Through Ceiling-Attic Recessed Lighting Fixtures Through 3d Numerical Simulation, Ri Na, Shengmao Lin, Zhigang Shen, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

Abstract Air leakage through recessed lighting fixtures has been identified as a common issue that causes extra energy consumption in residential buildings. However, few quantitative studies in this area were found. As such, a preliminary assessment of the magnitude of this type of energy loss was conducted by using three-dimensional (3D) transient computational fluid dynamics (CFD) models. A hypothetical layout of recessed lighting fixtures was designed with boundary conditions of four different seasons, which were obtained from recorded roof/attic temperature data sets. The results of the study indicate that leakage of recessed lighting fixtures could be a significant channel of …

Significance Of Parameters Affecting The Performance Of A Passive Down-Draft Evaporative Cooling (Pdec) Tower With A Spray System, Daeho Kang, Richard K. Strand

Publications and Research

PDEC towers with spray systems are known to achieve substantial energy savings. Various parameters such as the wet-bulb depression, the tower height, and the wind speed have been known to be key factors affecting the performance of the system. To date, the significance of these parameters and other important factors have not been adequately treated in the literature. There also has been a lack of models that can successfully investigate potential benefits of the system under various conditions where this particular system could be applicable. To address these critical issues, this study performed a parametric analysis by using a FLUENT …

Experimental Building Demonstration Model With Viscous Fluid Dampers, Blake Thomas Reeve, Brianna Jean Kufa, Aden Malek Stepanians, Sophie Carmion Ratkovich

Architectural Engineering

The Architectural Engineering major places a heavy emphasis on structural dynamics and the role of wind and seismic loading in building analysis and design. Buildings of high importance that are critical to community function, such as hospitals, often utilize supplemental damping devices like supplemental viscous fluid dampers or base isolators to reduce the overall demands on the structural system. The design and analysis of these dampers are typically not taught at the undergraduate level, and is frequently performed by mechanical engineers, in lieu of structural engineers.

To better understand and research building behavior with supplemental damping devices, our multi-disciplinary team …

Effects Of Noise, Reverberation And Foreign Accent On Native And Non-Native Listeners’ Performance Of English Speech Comprehension, Zhao Ellen Peng, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

A large number of non-native English speakers may be found in American classrooms, both as listeners and talkers. Little is known about how this population comprehends speech in realistic adverse acoustical conditions. A study was conducted to investigate the effects of background noise level (BNL), reverberation time (RT), and talker foreign accent on native and non-native listeners' speech comprehension, while controlling for English language abilities. A total of 115 adult listeners completed comprehension tasks under 15 acoustic conditions: three BNLs (RC-30, RC-40, and RC-50) and five RTs (from 0.4 to 1.2 s). Fifty-six listeners were tested with speech from native …

Design And Optimization Of Membrane-Type Acoustic Metamaterials, Matthew G. Blevins

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

One of the most common problems in noise control is the attenuation of low frequency noise. Typical solutions require barriers with high density and/or thickness. Membrane-type acoustic metamaterials are a novel type of engineered material capable of high low-frequency transmission loss despite their small thickness and light weight. These materials are ideally suited to applications with strict size and weight limitations such as aircraft, automobiles, and buildings. The transmission loss profile can be manipulated by changing the micro-level substructure, stacking multiple unit cells, or by creating multi-celled arrays. To date, analysis has focused primarily on experimental studies in plane-wave tubes …

Tron 2.0 - The Experience, Alecsandro G. Vitale, Alexander W. Billings, Jordan Delfino, William Beechinor, Kelly Rorden

Architectural Engineering

The goal of this senior project was to come up with a structural-engineering-related schematic design for a roller coaster to be installed in Disneyland called TRON 2.0: The Experience. This involved looking at both design processes that we had already learned through our curriculum as well as researching concepts that were previously foreign to us, namely the dynamic application of loads and the effects of fatigue stresses.

A story was established based on the source material: the TRON movies produced by Walt Disney Studios. Thematic elements from the story were used as the basis for design implications that would become …

Cultural Change Through Bim: Driving Lean Transformation In Education, Avril Behan, Malachy Mathews, Kevin Furlong, Ciara Ahern, Una Beagon, Peter Brennan, Colin Conway, Lee Corcoran, Pierce Fahy, Alan Hore, Barry Mcauley, Trevor Woods

Conference papers

This paper presents a case study of how the adoption of BIM-based practices in the AECO industry is being reflected by cultural change in higher education in Ireland. The silo-mentality that has dominated the AECO sector for more than a century has, despite numerous reorganisations, been replicated in the structures of educational institutions, including in Dublin Institute of Technology since the inception of its founding colleges in the late 1800s. Most AECO programmes must include content that is external to the programme’s specific discipline. Through the School structures of the Institute, delivery of such content is known as "service teaching" …

Room Acoustic Effects On Speech Comprehension Of English-As-Second-Language Talkers And Listeners Versus Native-English-Speaking Talkers And Listeners, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

Approximately 21% of the children in the United States school system speak a language other than English at home, but are being taught in English at school. English is additionally being used more and more often as a common language in international settings, even though participants at these international events again are not native English speakers. How do adverse room acoustic environments, including higher background noise levels and longer reverberation times, impact English-as-a-Second-Language (ESL) talkers and listeners versus native English-speaking talkers and listeners? This presentation focuses on two recent studies at the University of Nebraska that investigate how assorted room …

Quantification And Subjective Perception Of Varying Reflection Densities In Measured Room Impulsed Responses, Hyun Hong, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

This project focuses on quantifying and testing the subjective perception of reflection densities, or the number of reflections per second, from different room impulse responses. The widely used room acoustic metric, reverberation time, is linked to the perceived reverberation in a room. Two different rooms having the same reverberation time, though, can have different reflection densities in their room impulse responses, and this difference in reflection density may affect how listeners perceive spatial impression in rooms. To investigate how sensitive humans are to a change of reflection density, this paper first reviews assorted parameters for quantifying reflection density from measured …