Architectural Engineering Commons^™

Structural Engineering Students For Haiti: A Student-Run, Student-Initiated Organization For The Benefit Of The Haitian People, Andrew Jimenez, Alex Daddow

Architectural Engineering

On August 2nd 2012, a group of 10 students from Cal Poly, San Luis Obispo traveled to Léogâne, Haiti to construct a bell tower for the Saint Rose de Lima Parish. The trip consisted of four days of construction, and three days of touring. The seven days in Haiti were a result of three months of planning by a student-run, student-initiated group called Structural Engineering Students for Haiti, or SESH. The following report documents the planning, execution and lessons learned from this trip. The planning included everything from fund raising to disease prevention. The trip was successful because the bell …

Ua61/3 Health Sciences Complex: Nursing & Physical Therapy, Wku Health & Human Services

WKU Administration Documents

Booklet describing the Medical Center / WKU Health Sciences Complex facility. Floorplans are included.

Wind Loading On Trees Integrated With A Building Envelope, Aly Mousaad Aly, Alberto Zasso, Girma Bitsuamlak, Alberto Nicola Longarini, Arindam Gam Chowdhury

Faculty Publications

With the sustainability movement, vegetated building envelopes are gaining more popularity. This requires special wind effect investigations, both from sustainability and resiliency perspectives. The current paper focuses on wind load estimation on small- and full-scale trees used as part of green roofs and balconies. Small-scale wind load assessment was carried out using wind tunnel testing in a global-effect study to understand the interference effects from surrounding structures. Full-scale trees were investigated at a large open-jet facility in a local-effect study to investigate the wind-tree interaction. The effect of Reynolds number combined with shape change on the overall loads measured at …

Effects Of Reverberation And Noise On Speech Comprehension By Native And Non-Native English-Speaking Listeners, Z. Ellen Peng, Lily M. Wang, Siu-Kit Lau, Adam M. Steinbach

Durham School of Architectural Engineering and Construction: Faculty Publications

Previous studies have demonstrated the negative impact of adverse signal-to-noise-ratios on non-native English-speaking listeners' performance on speech recognition using recall tasks, as well as implied that comprehension skills were more impaired than recognition skills under reverberation and noise. The authors have themselves previously conducted a pilot study on three native and three non-native Englishspeaking listeners to examine the effects of reverberation and noise using speech comprehension tasks. Those results suggested that speech comprehension performance is worse under longer reverberation times (RT), and that a longer RT is more detrimental to speech comprehension by non-native listeners than native listeners. This paper …

Acoustic Tweets And Blogs: Using Social Media In An Undergraduate Acoustics Course, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

Each fall, the author teaches an undergraduate architectural acoustics course to around 40 third-year architectural engineering students at the University of Nebraska. Beginning in 2011, a social media component was introduced to explore the use of this technology and how it may supplement the students' learning experience. Students were given an opportunity to receive extra credit by using Twitter and/or blogging about course material using a set hashtag (#AE3300) or through the course website. Results were positive, and the author will discuss pros and cons that she has experienced in adding this social media component. Suggestions for future implementations and …

Can We Teach Lean Construction Methods In Schools Of Architecture, Gary Graham

Fall 2012 Faculty Showcase

Traditionally, schools of architecture are not great laboratories to explore the collaborative processes and teamwork that are essential to integrated design and delivery practices as exemplified by Lean Construction. The pre-eminence of the “hero-architect” in the design studio is in direct conflict with methods that can reduce risk and improve the efficiency of the design and construction delivery process. Risk? Efficiency? Delivery Process?... not mention Cost Control, Schedule and Constructability, are foreign concepts to the predominant design studio culture.

Integrated practices and integrated project delivery are clearly “hot” topics in the design and construction industry today. They are a response …

Lifecycle Energy Consumption Prediction Of Residential Buildings By Incorporating Longitudinal Uncertainties, Endong Wang, Zhigang Shen

Durham School of Architectural Engineering and Construction: Faculty Publications

Accurate prediction of buildings’ lifecycle energy consumption is a critical part in lifecycle assessment of residential buildings. Longitudinal variations in building conditions, weather conditions and building’s service life can cause significant deviation of the prediction from the real lifecycle energy consumption. The objective is to improve the accuracy of lifecycle energy consumption prediction by properly modelling the longitudinal variations in residential energy consumption model using Markov chain based stochastic approach. A stochastic Markov model considering longitudinal uncertainties in building condition, degree days, and service life is developed: 1) Building’s service life is estimated through Markov deterioration curve derived from actual …

Investigating Self-Cooling Effects Of Ventilated Attics Under Different Roof And Ambient Temperatures In Summer, Zhigang Shen, Shimin Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

An unsteady computational fluid dynamics model is employed to simulate summer-time buoyancy-driven turbulent ventilation in gable-roof attics of residential buildings. The energy performance of vented attics is assessed by comparing their performance to sealed attics with the same geometry and insulation configurations. The simulated boundary conditions of the roof-top temperature ranging between 295.15 K and 345.15 K, coupled with an ambient temperature ranging between 295.15 K and 315.15 K, resemble the summer attic conditions with effects of solar irradiance on the roofs. Simulation results indicate that both the vented and sealed attics are dominated by thermal stratification. The cooling load …

Implementing Building Information Modeling In Public Works Projects In Ireland, Barry Mcauley, Alan V. Hore, Roger West

Conference papers

The Irish State in recent years has suffered huge financial losses in the public works sector, which has now pushed the Irish Government to explore new ways of controlling cost. This background lead to the introduction of the Capital Works Management Framework in 2007 which aimed to support the certainty of outcome in terms of cost and quality, as well as improved risk management, through the implementation of fixed price contracts. In order to successfully compete within this framework it is recommended by the authors, that Irish Government moves towards the legal mandating of BIM. This can ensure a greater …

A Composite Structural Steel And Prestressed Concrete Beam For Building Floor Systems, Nathan Dewit

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Precast prestressed concrete beams, such as rectangular and inverted tee beam, currently used in residential and commercial buildings are deep, heavy, and limited to span-to-depth ratios of 15. The research proposes a composite structural steel and prestressed concrete beam that is shallow, light, easy to produce and erect, and able to achieve a span-to-depth ratio of 24. The proposed beam is designed to be used with precast columns, hollow-core planks, and a cast-in-place topping to create a moment-resisting floor system that minimizes the need for shear walls. The goal of this system is to eliminate as many of the limitations …

From The Personal To The Communal - Support For An Evolutionary Urban System, Noel Brady

Conference papers

A short discussion towards a model for the future of urban and interurban development. From the personal tot he communal argues for a futurist city that is an organic physiological time filled environment.

Ua61/3 Wku Nursing & Physical Therapy - The Medical Center - Wku Health Sciences Complex, Wku Health & Human Services

WKU Administration Documents

Fundraising brochure regarding The Medical Center – WKU Health Sciences Complex constructed from 2012 through 2014. Features architectural renderings of each floor.

Life Cycle Cost Analysis Under Ireland's Capital Works Management Framework, Dermot Kehily, Alan Hore

Conference papers

The Capital Works Management Framework (CWMF) is a structure that has been developed to deliver the Irish government’s objectives in relation to public sector construction procurement reform. This research provides practical guidance and assistance for construction cost professionals in carrying out Whole Life Cycle Cost Analysis (WLCCA) and producing Life Cycle Cost Models(LCCMs) under the CWMF. The research outlines how LCCA calculations can be carried out for cost planning purposes and recommends a standard methodology for presenting LCCMs under the CWMF. The CWMF states that Whole Life Costs (WLC) are an important consideration throughout the design process and should be …

2:1 The Paper Tube Project, Noel Brady

Articles

Review of applied technological solution to rapid building techniques using paper tube and analogous materials to create space enclosing geodesic systems.

A Directionally Tunable But Frequency-Invariant Beamformer On An Acoustic Velocity-Sensor Triad To Enhance Speech Perception, Yue Ivan Wu, Kainam Thomas Wong, Xin Yuan, Siu-Kit Lau, Shiu-Keung Tang

Durham School of Architectural Engineering and Construction: Faculty Publications

Herein investigated are computationally simple microphone-array beamformers that are independent of the frequency-spectra of all signals, all interference, and all noises. These beamformers allow the listener to tune the desired azimuth-elevation “look direction.” No prior information is needed of the interference. These beamformers deploy a physically compact triad of three collocated but orthogonally oriented velocity sensors. These proposed schemes’ efficacy is verified by a jury test, using simulated data constructed with Mandarin Chinese (a.k.a. Putonghua) speech samples. For example, a desired speech signal, originally at a very adverse signal-to-interference-and-noise power ratio (SINR) of -30 dB, may be processed to become …

Application Of Drum-Buffer-Rope Methodology In Scheduling Of Healthcare System, Arefeh Mohammadi, Emmanuel S. Eneyo

Durham School of Architectural Engineering and Construction: Faculty Publications

Theory of constraints (TOC) is a management philosophy that seeks to increase throughput (efficiency or performance) of the system by identifying those processes that are constraining the system bottlenecks. There have been very few profound studies of TOC in health care systems. In order to fill this gap, this study was conducted to determine how healthcare systems are utilizing components of TOC to schedule operations and what results are being obtained. This is done by using a patient flow model for a radiotherapy section of a hospital. The drum-buffer-rope (DBR) was used as the methodology for scheduling this flow. Successful …

Teaching Sustainable Design Using Bim And Project-Based Energy Simulations, Zhigang Shen, Wayne Jensen, Tim Wentz, Bruce Fischer

Durham School of Architectural Engineering and Construction: Faculty Publications

The cross-disciplinary nature of energy-efficient building design has created many challenges for architecture, engineering and construction instructors. One of the technical challenges in teaching sustainable building design is enabling students to quantitatively understand how different building designs affect a building’s energy performance. Concept based instructional methods fall short in evaluating the impact of different design choices on a buildings’ energy consumption. Building Information Modeling (BIM) with energy performance software provides a feasible tool to evaluate building design parameters. One notable advantage of this tool is its ability to couple 3D visualization of the structure with energy performance analysis without requiring …

Effects Of Roof Pitch On Air Flow And Heating Load Of Sealed And Vented Attics For Gable-Roof Residential Buildings, Shimin Wang, Zhigang Shen

Durham School of Architectural Engineering and Construction: Faculty Publications

Pitch value is an important consideration in residential gable roof design and construction. However, how roof pitch, coupled with air flows in attic space, affects the energy performance of building attics has been barely investigated. In this paper, a 2D unsteady computational fluid dynamics (CFD) model is employed to investigate the effects of roof pitch on air flow and heating load of both sealed and vented attics for gable-roof residential buildings. The simulation results show that air flow in the sealed attics is steady and asymmetric, while that in the vented attics is a combination of an essentially symmetric base …

Effects Of Inclusion Shapes Within Rigid Porous Materials On Acoustic Performance, Hyun Hong, Siu-Kit Lau

Durham School of Architectural Engineering and Construction: Faculty Publications

The present study investigates the influence of various shapes of inclusions having same volume embedded in a porous rigid material. Previous studies showed improvement of the broadband sound absorption with particular shapes of inclusions. However, different volumes of the inclusions have been considered; therefore, the bulk densities are not the same for comparison. The present study extends the investigations of inclusions in porous materials with same volume (or bulk density) to eliminate the influence by the change of bulk density. The effects of shape will be discussed. Finite element modeling will be used for this study. Total four different shapes: …

Impacts Of Ventilation Ratio And Vent Balance On Cooling Load And Air Flow Of Naturally Ventilated Attics, Shimin Wang, Zhigang Shen

Durham School of Architectural Engineering and Construction: Faculty Publications

The impacts of ventilation ratio and vent balance on cooling load and air flow of naturally ventilated attics are studied in this paper using an unsteady computational fluid dynamics (CFD) model. Buoyancy-driven turbulent ventilations in attics of gable-roof residential buildings are simulated for typical summer conditions. Ventilation ratios from 1/400 to 1/25 combined with both balanced and unbalanced vent configurations are investigated. The modeling results show that the air flows in the attics are steady and exhibit a general streamline pattern that is qualitatively insensitive to the variations in ventilation ratio and vent configuration. The predicted temperature fields are characterized …

The Impact Of Roof Pitch And Ceiling Insulation On Cooling Load Of Naturally-Ventilated Attics, Shimin Wang, Zhigang Shen, Linxia Gu

Durham School of Architectural Engineering and Construction: Faculty Publications

A 2D unsteady computational fluid dynamics (CFD) model is employed to simulate buoyancy-driven turbulent ventilation in attics with different pitch values and ceiling insulation levels under summer conditions. The impacts of roof pitch and ceiling insulation on the cooling load of gable-roof residential buildings are investigated based on the simulation of turbulent air flow and natural convection heat transfer in attic spaces with roof pitches from 3/12 to 18/12 combined with ceiling insulation levels from R-1.2 to R-40. The modeling results show that the air flows in the attics are steady and exhibit a general streamline pattern that is qualitatively …

Development And Evaluation Of A Simplified Modeling Approach For Hydraulic Systems, Yuebin Yu, Vivian Loftness, Daihong Yu, Yan Lu, Volker Hartkopf

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper presents how a hydraulic system can be properly modeled for hydraulic balancing, knowledge of flow distribution, coupled simulation, and evaluation of control, etc. It focuses on water-based heating and cooling systems, which generally have high energy efficiency in design but could perform poorly in reality due to the undersensing condition and strong thermal-hydraulic coupling. The study introduces the motivation, presents the simplified modeling methodology, and illustrates the model and simulating structure. A preliminary evaluation of the method is conducted with two simple simulations. The proposed “node-branch-state” modeling approach could be easily modified, expanded and integrated into a detailed …

Life Cycle Costing Template (Excel), Dermot Kehily

Reports

No abstract provided.

How Much Do U.S. University Students Know, And Want To Know, About Sustainability And Green Building? The Findings Of A Survey, And Possible Implications For General Elective Curricula., Jeremy R. Farner

Purdue Polytechnic Masters Theses

Using the survey approach, this investigation examined the attitudes and interest of college students at two universities in different geographic locations within the United States.  Approximately 24,000 students from all disciplines and majors at Weber State University (WSU) in Utah, and 4,000 at Purdue University in Indiana, were invited to participate in a study to determine current knowledge, familiarity, and interest in topics within the sustainability and Green Building educational arena. The goal of this study was to determine what students already know, would like to know, and how much interest there would be in developing …

How Much Do U.S. University Students Know, And Want To Know, About Sustainability And Green Building? The Findings Of A Survey, And Possible Implications For General Elective Curriculum., Jeremy R. Farner

Purdue Polytechnic Masters Theses

Using the survey approach, this investigation examined the attitudes and interest of college students at two universities in different geographic locations within the United States.  Approximately 24,000 students from all disciplines and majors at Weber State University (WSU) in Utah, and 4,000 at Purdue University in Indiana, were invited to participate in a study to determine current knowledge, familiarity, and interest in topics within the sustainability and Green Building educational arena. The goal of this study was to determine what students already know, would like to know, and how much interest there would be in developing …

Stochastic Hybrid Embodied Co2-Eq Analysis: An Application To The Irish Apartment Building Sector, Adolf Acquaye, Aidan Duffy, Biswajit Basu

Articles

Although embodiedCO2-eq analysis has seen recent developments as evident in the establishment of the ISO14040 and 14044 LCA standards, it is recognized that due to weaknesses in gathering data on product-related emissions,embodiedCO2-eq values are probabilistic. This paper presents a stochastic analysis of hybrid embodied CO2-eq in buildings to account for this weakness in traditional methods and, by way of example, applies it to an Irish construction-sector case study. Using seven apartment buildings, 70,000 results are simulated with Monte Carlo analysis and used to derive probabilistic and cumulative embodied CO2-eq intensity distributions for apartment buildings in Ireland. A Wakeby distribution with …

Thermal Bridging - Understanding Its Critical Role In Energy Efficiency, Joseph Little, Beñat Arregi

Articles

Plane element heat loss[1] and thermal bridging[2] together constitute all the conduction heat loss (measured in W/K, watts per kelvin) through the thermal envelope[3] of a building. Perversely insulating the plane elements more and more without carefully dealing with junctions can lead to a significant increase in thermal bridging heat loss. This is often more significant in poorly thought-out energy-focused retrofits than in existing or new buildings.

A Financial Impact Assessment Of Ld 1725: Stream Crossings, New England Environmental Finance Center, Muskie School Of Public Service

Water

This report looks at the potential financial impact of LD 1725 on the estimated 30,000 stream crossings in the State of Maine that would be affected by the law. Our research for this report included the analysis of nearly 2000 stream crossings and the data collection necessary for the development of extensive stream crossing replacement cost models. We found that the 1.2 bankfull requirements in LD 1725 would result in a 75% ‐ 250% increase in structure widths for stream crossing projects across the state. An upsize of this magnitude would increase the cost of replacing stream crossings statewide by …

Industry-Experienced Graduate Student Program: Innovative Collaboration In Architectural Engineering At The University Of Nebraska–Lincoln, Clarence E. Waters, Steve Alvine, Michelle L. Eble-Hankins

Durham School of Architectural Engineering and Construction: Faculty Publications

In 2001, the Architectural Engineering Department at the University of Nebraska–Lincoln, along with industry partners, established an industry-experienced graduate student program. The program was developed to bring experienced design professionals to collaborate with the industry while pursuing a Ph.D. in architectural engineering. This program is designed to be mutually beneficial to industry partners, -graduate students, the University of Nebraska–Lincoln Architectural Engineering Department, and the building industry at large. The first doctoral candidate in the program graduated, and significant collaborative work was completed for the industry partner. All parties to this initial offering are pleased with the outcome and believe the …

Culvert Material Cost Comparison, New England Environmental Finance Center

Water

The following tables provide a detailed look at the role that culvert material and culvert diameter play in the overall cost of a culvert replacement project.