Architectural Engineering Commons^™

Measuring Building Substructures: Solutions To ‘First Year’ Introductory Level Examination Questions, Tony Cunningham

Other Resources

The measurement of substructure works to simple domestic type buildings is a logical starting point for students to commence the process of taking-off building quantities. Substructure work is typically the first class of work to be explained in textbooks dealing with both construction technology and building measurement. However, substructure work is often one of the most challenging elements to measure. In this paper, the author demonstrates the process of measuring basic substructure designs. The approach involves providing solutions to a sample of four Irish Department of Education Technological Certificate: Builders’ Quantities Intermediate Stage examinations. The intention is to demonstrate how …

Mechanical And Thermal Evaluation Of Different Types Of Pcm-Concrete Composite Panels, Dervilla Niall, Oliver Kinnane, Roger West, Sarah Mccormack

Conference papers

ABSTRACT: Thermal mass indicates the ability of a material to store and release heat and is a function of the heat storage capacity of a material. The thermal mass of construction materials can be used to reduce the energy required for heating and cooling buildings. The heat storage capacity of concrete can be increased by incorporating phase change materials (PCMs) into the concrete and hence providing additional latent heat storage capacity. Research was carried out to compare the thermal behaviour of two different types of PCM/concrete composite panels. The first type of panel was formed by adding microencapsulated paraffin to …

Ua66 Ogden College Of Science & Engineering Newsletter, Cheryl Stevens, Dean

Ogden College of Science & Engineering Publications

No abstract provided.

Case Study: Epoch Estate Wines Production Facility, Kevin Christopher Marx

Architectural Engineering

The project will be a case study performed on Epoch Estate Wines Production Facility in Templeton California. The building is a cut and cover project which was designed to hug the existing oak trees on site. The building serves as a capstone to the Architectural Engineering curriculum because it seamlessly combines the four main structural building materials: steel, concrete, masonry and timber, while also including every lateral force resisting system into one succinct project. During the design of the project, meetings with the architecture of record and client representative occurred where discussion about design procedure and client’s needs took place. …

A Survey Of Student Interest In Construction Management Students’ Involvement In Design Village Competition, Candace Nicole Stephens

Construction Management

Included in this paper are the results of two surveys that were designed to assess student interest in Construction Management students’ participation in the annual Design Village Competition hosted by Cal Poly every spring. Sixty-five Architecture and Architectural Engineering, and thirty Construction Management undergraduate students completed these surveys at the College of Architecture and Environmental Design (CAED), Cal Poly San Luis Obispo. The overall student interest level in both groups was majority positive. To delve deeper into potential benefits and obstacles on this subject, along with quantitative data from the surveys, there is also qualitative data from faculty member interviews, …

A New Take On Testing: Evaluating Design Systems In Response To The Recent Natural Disaster In Nepal, Jazmine L. Brown

Creative Activity and Research Day - CARD

In this thesis project I analyze the destruction of the 2015 earthquake in Nepal, specifically in the structural and architectural collapse. I have focused my research on the areas with greatest documented destruction and vulnerability, specifically Kathmandu and the settlements in the Middle Hills. The introduction of a new lateral testing mechanism can provided much needed information on the seismic strengths of vernacular construction methods.

Glaze Station Expansion And Building, Nicholas M. Hunt, Seth J. Green

Celebration of Student Scholarship Poster Sessions Archive

No abstract provided.

Multidimensional Dialogue Through Architecture | An Exploration Of The Possible Dialogue Between Humans And Walls, Fengqi Li

Architecture Senior Theses

This thesis proposes that architectural design no longer has to be primarily static, but rather it can be dynamically responsive to multiple information streams and conditions.

Multidimensional Dialogue Through Architecture is developed from the understanding of human factors and ergonomics. The dispersed works on research and inference are different ways to explore the interaction between the discipline of architecture and the other fields, such as psychology, engineering, bio-mechanics, physiology, cognitive science, and anthropomorphic. Therefore, the purpose of this thesis is not to design a specific building that works perfectly in particular conditions but rather to use architectural elements to mediate …

The Renaissance Of The Railway | Towards A Global High-Speed System, Xiaoyu Li

Architecture Senior Theses

The railway has shown its unique character as a mode of transportation since its invention in Europe during the Industrial Revolution. In the beginning, its carrying capacity made it stand out, transforming human behavior, and stimulating economic productivity. During the 20th century, air travel, the railways, and long-distance road networks have shared the burden of human transportation - in many countries the car and plane have won out. In recent decade, however, new interest in the railway's potential has been generated as a result of the emergence of new technologies like high-speed rail and the maglev system. Greater speeds are …

Subtraction | Construction In Reverse, Sherina S. Zhang

Architecture Senior Theses

The life of a building does not begin at the creation of the new; it starts with the subtraction of the old. As the pace of technological development accelerates, buildings are erected and demolished at an unprecedented rate. Cities use their urban artifacts like skyscrapers, to portray economic and political prowess. For example, the ghost cities of China are relics of a burst financial bubble while Venezuelan ruling party elites name business towers after themselves as a show of power and prosperity. Many parts of the world today are now overbuilt with artifacts that decline into obsolescence. Demolition procedures erase …

Construction Training Facility (Essu Philippines), Omar Ramirez

Architectural Engineering

The purpose of this project was to work hand in hand with engineers and construction managers from the non-profit organization Build Change in order to construct a training facility in the Philippines. The training facility would educate the locals how to build safer structures that would be more effective during earthquakes.

The focus of this report is to elaborate on the process of the project, the difficulties encountered, and the benefits of the overall project when completed.

The Function And Format Of Bills Of Quantities:An Irish Context, Tony Cunningham

Other Resources

The production of bills of quantities as a means of obtaining tenders has traditionally been viewed as a primary function of the quantity surveying profession.

This study investigates the function and format of bills of quantities in the Irish context. It explains the nature of bills, how they are compiled, and identifies the situations in which they may be used. The primary functions of the bill as a means of obtaining tenders and its status as a contract document are explored. The study also addresses particular aspects of the bill which may aid the effective management of construction projects for …

Ua66 Ogden College Of Science & Engineering Newsletter, Cheryl Stevens, Dean

Ogden College of Science & Engineering Publications

No abstract provided.

Thermal Mass Behaviour Of Concrete Panels Incorporating Phase Change Materials, Dervilla Niall, Roger West, Sarah Mccormack, Oliver Kinnane

Conference papers

Phase Change Materials (PCM) have been incorporated into a range of building envelope materials with varied success. This study investigates two different methods of combining concrete and phase change materials to form PCM/concrete composite panels. The first method involves adding microencapsulated paraffin to fresh concrete during the mixing process. The second method involves vacuum impregnating butyl stearate into lightweight aggregate which is then included in the concrete mix design. The primary aim of the study is to determine which method is the most effective way to improve the thermal mass characteristics of a concrete panel in the context of a …

Experimental Study On The Thermal Characteristics Of Micro Channel Separate Heat Pipe Respect To Different Filling Ratio, Li Ling, Quan Zhang, Yuebin Yu, Shuguang Liao, Zhengyong Sha

Durham School of Architectural Engineering and Construction: Faculty Publications

A micro channel separate heat pipe (MCSHP) that can use natural cold energy was developed to reduce the cooling energy consumptions of telecommunications stations (TSs). Experimental investigations of exploring the optimal refrigerant filling ratio of MCSHP under different outdoor conditions and flow rates were presented. R22 was used as the working fluid. Various refrigerant filling ratios were tested in an enthalpy difference laboratory (EDL) in order to determine the optimal thermal performance for the exterior space temperature range from 8 °C to 23 °C and the air volume flow rate range from 1712 m3/h to 2980 m3/h. In addition, transient …

Designing A Residence In Sweden, Umeki Earl, Olivia Bufalini

School of Human Sciences Research Showcase

The project was to design a home for the Nordstroms, a family who lived in Sweden. The challenge was to design a home for the family of four with a maximum square footage of 1100 square feet using the codes and space allocations required for another country. Meeting the needs of the client required much research. RESEARCH included studying the regional climate, the municipal building codes, and city regulations. Thorough research of building construction framing methods, insulation types and installation methods, site planning, materials and finishes were also essential for completing the project.

Development Of Coordination Control For Multiple Rooftop Units, Denchai Woradechjumroen, Haorong Li, Akekachai Deesiri

Durham School of Architectural Engineering and Construction: Faculty Publications

Rooftop Units (RTUs) have been widely applied in providing space heating and cooling for commercial buildings. In total, they serve over 60% of the commercial building floor space in the U.S. Even through the current control approaches of a RTU can maintain the zone temperature corresponding to a set point temperature, it performs inefficiently due to several factors such as limited sensing capability, non- coordinated local control, inherent oversizing effects and so on. In addition to unnecessary power consumptions, the current control and operation technology on RTUs also lead to the space humidity problem, equipment efficiency degradation, and premature failure. …

A Need For Evidence-Based And Multidisciplinary Research To Study The Effects Of The Interaction Of School Environmental Conditions On Student Achievement, Josephine Lau, Lily M. Wang, Clarence E. Waters, James A. Bovaird

Durham School of Architectural Engineering and Construction: Faculty Publications

With funding from the U.S. Environmental Protection Agency’s (EPA) Healthy Schools initiative, a research team from the University of Nebraska– Lincoln (UNL) is currently working on establishing how environmental conditions in K-12 school buildings impact student scholastic achievement. The objectives of the research project are: (1) to study comprehensively the impacts of a wide set of indoor environmental factors (including indoor air quality, thermal, lighting and acoustic conditions) on student achievement; (2) to investigate how these environmental conditions interact with each other to impact student achievement; (3) to rank order the environmental variables in terms of their relative impact on …

Fault Diagnosis Of Refrigerant Charge Based On Pca And Decision Tree For Variable Refrigerant Flow Systems, Jiangyan Liu, Huanxin Chen, Jiangyu Wang, Guannan Li, Haorong Li, Wenju Hu

Durham School of Architectural Engineering and Construction: Faculty Publications

Variable refrigerant flow (VRF) systems are easily subjected to performance degradation due to refrigerant leakage, mechanical failure or improper maintenance after years of operation. Ideal VRF systems should equip with fault detection and diagnosis (FDD) program to sustain its normal operation. This paper presents the fault diagnosis method for refrigerant charge faults of variable refrigerant flow (VRF) systems. It is developed based on the classification and regression tree (CART) algorithm. Data of the experimental VRF system is used to test the advantages of the CART method. Results show that the decision tree can achieve desirable diagnosis efficiency on undercharge faults, …

Cognitive Radio For Smart Grid With Security Considerations, Khaled Shuaib, Ezedin Barka, Nedaa Al Hussien, Mohammed Abdel-Hafez, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

In this paper, we investigate how Cognitive Radio as a means of communication can be utilized to serve a smart grid deployment end to end, from a home area network to power generation. We show how Cognitive Radio can be mapped to integrate the possible different communication networks within a smart grid large scale deployment. In addition, various applications in smart grid are defined and discussed showing how Cognitive Radio can be used to fulfill their communication requirements. Moreover, information security issues pertained to the use of Cognitive Radio in a smart grid environment at different levels and layers are …

A Prediction Method For Overall Economic Value Of Fault Detection And Diagnostic Tools For Rooftop And Split Systems, David Yuill, James Braun

Durham School of Architectural Engineering and Construction: Faculty Publications

Fault detection and diagnostics (FDD) tools for air-conditioning application may perform well or poorly, but it is difficult to characterize this performance in a meaningful way. Some recently proposed evaluation techniques have provided various statistics to characterize FDD performance, but these results can be difficult for a potential adopter of FDD to understand. A new method of characterizing FDD performance by predicting the overall economic value of the FDD tool is proposed in this paper. It is applicable to FDD tools intended for air-cooled unitary airconditioners, such as rooftop units (RTU) and split systems. The method gives an estimated dollar …

Normalized Effect Of Condenser Fouling And Refrigerant Charge On Performance Of Vapor Compression Air Conditioning Systems, Mehdi Mehrabi, David Yuill

Durham School of Architectural Engineering and Construction: Faculty Publications

Several laboratory experiments have studied the effect of faults on vapor compression cycle air-conditioning systems. There has been a particular focus on refrigerant charge variation, which is believed to be quite common in air conditioners, and a lesser focus on heat exchanger fouling. The majority of the published results evaluate the fault effects on particular system operating parameters in one unit. For example, the effect on capacity and efficiency are typically evaluated. The results differ from one study to the next. The current paper summarizes the effects for all of the results available in the literature for condenser fouling and …

A Thermo-Activated Wall For Load Reduction And Supplementary Cooling With Free To Low-Cost Thermal Water, Yuebin Yu, Fuxin Niu, Heinz-Axel Guo, Denchai Woradechjumroen

Durham School of Architectural Engineering and Construction: Faculty Publications

A building envelope serves as a thermal barrier and plays an important role in determining the amount of energy used to achieve a comfortable indoor environment. Conventionally, it is constructed and treated as a passive component in a building thermal energy system. In this article, a novel, mini-tube capillary-network embedded and thermal-water activated building envelope is proposed to turn the passive component into active, therefore broaden the direct utilization of low-grade thermal energy in buildings. With this proposed approach, low-grade thermal water at a medium temperature close to the ambient environment can be potentially utilized to either counterbalance the thermal …

Student Absenteeism And The Comparisons Of Two Sampling Procedures For Culturable Bioaerosol Measurement In Classrooms With And Without Upper Room Ultraviolet Germicidal Irradiation Devices, Chunxiao Su, Josephine Lau, Shawn G. Gibbs

Durham School of Architectural Engineering and Construction: Faculty Publications

Upper room ultraviolet germicidal irradiance (UVGI) has been shown to reduce the concentration of bioaerosols in controlled chambers. However, there is a lack of experimental results on the reduction of bioaerosol concentrations by UVGI devices in actual uncontrolled buildings. This study was carried out in an American elementary school in the Midwest. Two sampling procedures were carried out in six selected classrooms with similar dimensions that were separated into two groups: (1) UVGI exposure group and (2) non-UVGI control group. Two-stage Tisch culturable impactors were utilized to collect airborne culturable bacteria and fungi. Monthly samples were collected during unoccupied period …

Fault Detection And Diagnosis Process For Oversizing Design On Multiple Packaged Air-Conditioning Units, Denchai Woradechjumroen, Haorong Li, Thanapat Promwattanapakee

Durham School of Architectural Engineering and Construction: Faculty Publications

Heating, ventilation, air-conditioning and Refrigeration (HVAC&R) systems are seldom designed or commissioned properly. The situation leads to abrupt or degradation faults resulting in inefficient energy uses, excessive energy consumption and high service costs. To solve these aforementioned problems, fault detection and diagnosis (FDD) is utilized to firstly detect any abnormal conditions of a system and then diagnoses and determines their causes. In order to apply this concept in HVAC oversizing designs, this paper proposes the state-of-art procedure of a FDD procedure for analyzing the inherently faulty design (oversizing) of multiple packaged air-conditioning units used to supply cooling for an open …

Compressor Having A Control And Dagnostic Module, Hung M. Pham, Fadi M. Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

An apparatus includes a Voltage sensor, a current sensor, and a controller. The Voltage sensor measures Voltage values of alternating current power Supplied to a capacitor. The capaci tor is electrically coupled to a compressor. The current sensor measures current values of the alternating current power. The controller is configured to receive the Voltage values and the current values. The controller is configured to determine a first power factor value based on at least one of the voltage values and at least one of the current values. The controller is configured to selectively detect a first capacitor fault in response …

Dispute Resolution Under The Principal Irish Forms Of Building Contract, Tony Cunningham

Other Resources

The construction industry is known to be litigious (Latham, 1994). This is hardly surprising given the industry’s fragmented nature in which project teams comprising an extensive network of employers, designers and constructors are brought together to deliver once-off projects, following which, the organisation is almost always disbanded. The short term objectives of the various groupings are often competing and occasionally incompatible. For example, many employers will wish to minimise costs in developing a project, designers may resist pressures on budgets in order to safeguard their ‘brand’, and the commercial imperative of maximising profit will drive contractors towards charging what the …

Risk Allocation Under The Principal ‘Traditional’ Irish Forms Of Building Contract, Tony Cunningham

Other Resources

Construction projects are risky ventures. Risks are inevitable and cannot be entirely eliminated but they can be transferred through appropriate wording in the clauses of a contract. Construction contracts allocate particular risks between the parties in order to identify who bears the cost if a particular risk comes to pass.

This study examines how contractual risks are allocated to the contracting parties under the Royal Institute of Architects in Ireland Form, 2012 version, where quantities form part of the contract, commonly known as ‘the Yellow Form’, and the Public Works Contract PW CF1 Form v 1.10, 2014 where the design …

Exploring Emerging Technologies For The Built Environment Circa 2015 For Use In Architectural Engineering And Related Majors, Connor J. Hanlon

Architectural Engineering

For this senior project I am seeking to combine my knowledge of Structural Engineering with Construction Management. For this task, I have decided to look at Building Information Modeling (BIM). In this project I investigate the BIM tools Trimble Tekla Structures and Autodesk Navis- works Manage. Tekla is a modeling, fabrication, and design program. Navisworks is a visualiza- tion and Clash Detection tool. For this project I have identiÅied two main goals relating to Navis- works and Tekla:

1. Create content to allow students and professors learn how to use Tekla and Navisworks

2. Determine the capabilities of these softwares, and Åigure …

   ---

   Go to article

"Defining Job Titles And Career Paths In Bim", Malachy Mathews

Conference papers

Ireland is undergoing a digital transformation. Some industries particularly in the areas of travel and retail have been radically transformed. However many industries are facing their biggest challenge in their existence already weakened by the economic crisis and constrained by their legacy business, it will be difficult for them to adapt and embrace the new rules dictated by digital change. Irelands design and construction industry is on the cusp of a digital transformation with early adopters now deriving some benefits from a move to a building information modeling (BIM) process. Digital transformation cannot happen unless there are personnel with the …