Open Access. Powered by Scholars. Published by Universities.®

Architectural Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Civil and Environmental Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 271 - 300 of 981

Full-Text Articles in Architectural Engineering

Evolution Prediction Of Hysteresis Behavior Of Sand Under Cyclic Loading, Pingxin Xia, Longtan Shao, Wen Deng, Chao Zeng May 2022

Evolution Prediction Of Hysteresis Behavior Of Sand Under Cyclic Loading, Pingxin Xia, Longtan Shao, Wen Deng, Chao Zeng

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Soil cyclic degradation is a serious issue that should be considered in engineering design and maintenance. The hysteretic response causes strength degradation and excessive settlement of soil structure in engineered and natural geosystems. Hysteresis is essentially the coupling deformation of elastic and plastic components during reloading and unloading processes. Conventional hysteretic models for sand in the elastoplastic framework rely highly on yield surface or potential surface evolution and fall short on complexity and inaccuracy. This study proposes a decoupling method to describe the hysteretic response of sand. In contrast to the conventional elastoplastic approach, this decoupling method can directly decouple …

Go to article

Implementation Of The Linear Amplitude Sweep Test To Evaluate Fatigue Resistance Of Highly Polymerized Asphalt Binders, Jun Liu, Yizhuang David Wang, Jenny Liu May 2022

Implementation Of The Linear Amplitude Sweep Test To Evaluate Fatigue Resistance Of Highly Polymerized Asphalt Binders, Jun Liu, Yizhuang David Wang, Jenny Liu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Highly polymerized asphalt binders (HPABs) such as PG 64-40 have been increasingly used in cold regions such as Alaska in recent years. However, there are currently considerable data gaps when it comes to the characterizations of the HPABs, especially their fatigue behaviors. The objective of this study is to apply the linear amplitude sweep (LAS) test with the viscoelastic continuum damage (VECD) model to assess the fatigue resistance of HPABs. Three HPABs (PG 52-40, PG 64-40, and PG 52-46) and one unmodified binder (PG 52-28) were used in the study. The fatigue failure during LAS tests on HPABs was defined, …

Go to article

Use Of Saturated Lightweight Sand To Improve The Mechanical And Microstructural Properties Of Uhpc With Fiber Alignment, Huanghuang Huang, Le Teng, Xiaojian Gao, Kamal Khayat, Fazhou Wang, Zhichao Liu May 2022

Use Of Saturated Lightweight Sand To Improve The Mechanical And Microstructural Properties Of Uhpc With Fiber Alignment, Huanghuang Huang, Le Teng, Xiaojian Gao, Kamal Khayat, Fazhou Wang, Zhichao Liu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper studied the influence of pre-saturated lightweight sand (LWS) on the mechanical and microstructural properties of UHPC cast with steel fiber alignment. The changes in hydration kinetics, porosity, nano-mechanical, and mechanical properties were studied. The LWS was used at 0–50% replacement volumes of total sand. Predominant fiber alignment was favored through a flow-induced casting method during casting of flexural prisms. Experiment results showed that the 28-d autogenous shrinkage was decreased from 450 to 275 μm/m with the LWS content increasing from 0 to 50%. The addition of 20% LWS led to maximum increases of 15%, 15%, and 20% in …

Go to article

Quantitative Holistic Assessment Of Implementing Collaborative Planning Practices, Amr Elsayegh, Islam H. El-Adaway May 2022

Quantitative Holistic Assessment Of Implementing Collaborative Planning Practices, Amr Elsayegh, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Practices of collaborative planning - as related to novel project delivery methods, information technologies, lean construction, and supply chain practices - can impact the cost and schedule performance of projects in the architectural, engineering, and construction (AEC) industry. However, there is a lack of research providing a quantitative holistic assessment of implementing collaborative planning practices. This paper fills this knowledge gap. Using an interdependent multistep research methodology, the authors (1) analyzed a holistic literature-based list of collaborative planning risks using 46 responses from industry expert surveys; (2) calculated the criticality of these risks and compared the obtained results using Spearman …

Go to article

Regularized Inversion Of Aerosol Hygroscopic Growth Factor Probability Density Function: Application To Humidity-Controlled Fast Integrated Mobility Spectrometer Measurements, Jiaoshi Zhang, Yang Wang, Steven Spielman, Susanne Hering, Jian Wang Apr 2022

Regularized Inversion Of Aerosol Hygroscopic Growth Factor Probability Density Function: Application To Humidity-Controlled Fast Integrated Mobility Spectrometer Measurements, Jiaoshi Zhang, Yang Wang, Steven Spielman, Susanne Hering, Jian Wang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Aerosol hygroscopic growth plays an important role in atmospheric particle chemistry and the effects of aerosol on radiation and hence climate. The hygroscopic growth is often characterized by a growth factor probability density function (GF-PDF), where the growth factor is defined as the ratio of the particle size at a specified relative humidity to its dry size. Parametric, least-squares methods are the most widely used algorithms for inverting the GF-PDF from measurements of the humidified tandem differential mobility analyzer (HTDMA) and have been recently applied to the GF-PDF inversion from measurements of the humidity-controlled fast integrated mobility spectrometer (HFIMS). However, …

Go to article

Feasibility Study Of Implementing Gamma-Ray Computed Tomography On Measuring Aggregate Distribution And Radiation Shielding Properties Of Concrete Samples, Omar Farid, Nima Farzadnia, Kamal Khayat, Muthanna H. Al-Dahhan Apr 2022

Feasibility Study Of Implementing Gamma-Ray Computed Tomography On Measuring Aggregate Distribution And Radiation Shielding Properties Of Concrete Samples, Omar Farid, Nima Farzadnia, Kamal Khayat, Muthanna H. Al-Dahhan

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Aggregate segregation is one of the key defects that impair the performance of concrete at fresh and hardened stages. This study aims to assess the feasibility of using an advanced technique to identify/scan/determine the aggregate segregation of concrete elements and determine radiation shielding properties of the concrete. The gamma-ray computed tomography (γ-CT) technique was employed to study aggregate distribution/dispersion in self-consolidating concrete (SCC). Accordingly, two SCC mixtures with moderate segregation (MS) and high segregation (HS) levels were cast and compared with highly stable SCC with no segregation (NS). The γ-CT scans were located on three different levels of concrete specimens …

Go to article

Fast Forest Fire Smoke Detection Using Mvmnet, Yaowen Hu, Jialei Zhan, Guoxiong Zhou, Aibin Chen, Weiwei Cai, Kun Guo, Yahui Hu, Liujun Li Apr 2022

Fast Forest Fire Smoke Detection Using Mvmnet, Yaowen Hu, Jialei Zhan, Guoxiong Zhou, Aibin Chen, Weiwei Cai, Kun Guo, Yahui Hu, Liujun Li

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Forest Fires Are a Huge Ecological Hazard, and Smoke is an Early Characteristic of Forest Fires. Smoke is Present Only in a Tiny Region in Images that Are Captured in the Early Stages of Smoke Occurrence or When the Smoke is Far from the Camera. Furthermore, Smoke Dispersal is Uneven, and the Background Environment is Complicated and Changing, Thereby Leading to Inconspicuous Pixel-Based Features that Complicate Smoke Detection. in This Paper, We Propose a Detection Method Called Multioriented Detection based on a Value Conversion-Attention Mechanism Module and Mixed-NMS (MVMNet). First, a Multioriented Detection Method is Proposed. in Contrast to Traditional …

Go to article

Quantitative Evaluation Of Steel Corrosion Induced Deterioration In Rubber Concrete By Integrating Ultrasonic Testing, Machine Learning And Mesoscale Simulation, Jinrui Zhang, Mengxi Zhang, Biqin Dong, Hongyan Ma Apr 2022

Quantitative Evaluation Of Steel Corrosion Induced Deterioration In Rubber Concrete By Integrating Ultrasonic Testing, Machine Learning And Mesoscale Simulation, Jinrui Zhang, Mengxi Zhang, Biqin Dong, Hongyan Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Chloride-induced steel corrosion seriously affects the durability of reinforced concrete structures. Rubber concrete, an environmentally friendly construction material in which waste rubber is recycled as a concrete component, has demonstrated superior resistance to chloride-induced steel corrosion and the subsequent concrete deterioration. However, quantitative evaluation of the degree of deterioration in rubber concrete based on nondestructive detection is challenging due to the complexity of the material. In this paper, reinforced concrete specimens with rubber contents of 0, 10% and 20% are subjected to the electrochemically accelerated corrosion experiments and monitored by ultrasonic testing. Six machine learning models are trained by the …

Go to article

Development And Characterization Of Magnesium Phosphate Cement Based Ultra-High Performance Concrete, Jihui Qin, Fumin Dai, Hongyan Ma, Xiaobing Dai, Zhen Li, Xingwen Jia, Jueshi Qian Apr 2022

Development And Characterization Of Magnesium Phosphate Cement Based Ultra-High Performance Concrete, Jihui Qin, Fumin Dai, Hongyan Ma, Xiaobing Dai, Zhen Li, Xingwen Jia, Jueshi Qian

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study aims at the development of magnesium phosphate cement-based ultra-high performance concrete (MPC-UHPC). To this end, MPC paste phase was designed by using high magnesia-to-phosphate (M/P, 3.5) and low water-to-cement (W/C, 0.10–0.16) mass ratios, and certain amounts of ultra-fine fly ash (UFA, 5%–15%). Fresh and hardened properties, and microstructure of the developed MPC-UHPC were evaluated, and compared with those of conventional UHPC as well. Test results showed that lower W/C resulted in higher mechanical strengths and lower drying shrinkage, but the sharp decrease of workability and increase of autogenous shrinkage. At a constant W/C, the addition of UFA effectively …

Go to article

Pumping Of Concrete: Understanding A Common Placement Method With Lots Of Challenges, Dimitri Feys, Geert De Schutter, Shirin Fataei, Nicos S. Martys, Viktor Mechtcherine Apr 2022

Pumping Of Concrete: Understanding A Common Placement Method With Lots Of Challenges, Dimitri Feys, Geert De Schutter, Shirin Fataei, Nicos S. Martys, Viktor Mechtcherine

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Several million cubic meters of concrete are pumped daily, as this technique permits fast concrete placement. Fundamental research has been performed and practical guidelines have been developed to increase the knowledge of concrete behavior in pipes. However, the pumping process and concrete behavior are not fully understood. This paper gives an overview of the current knowledge of concrete pumping. At first, the known physics governing the flow of concrete in pipes are introduced. A series of experimental techniques characterizing concrete flow behavior near a smooth wall to predict pressure-flow rate relationships are discussed, followed by recent developments in the use …

Go to article

Effect Of Carbon Nanotube And Graphite Nanoplatelet On Composition, Structure, And Nano-Mechanical Properties Of C-S-H In Uhpc, Huanghuang Huang, Le Teng, Xiaojian Gao, Kamal Khayat, Fazhou Wang, Zhichao Liu Apr 2022

Effect Of Carbon Nanotube And Graphite Nanoplatelet On Composition, Structure, And Nano-Mechanical Properties Of C-S-H In Uhpc, Huanghuang Huang, Le Teng, Xiaojian Gao, Kamal Khayat, Fazhou Wang, Zhichao Liu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper studied the influence of carbon nanotube (CNT) and graphite nanoplatelet (GNP) used at 0 to 0.3%, by mass of binder, on composition, structure, and nano-mechanical characteristics of C-S-H of ultra-high performance concrete (UHPC). Hydration kinetics, pore structure, and mechanical properties of UHPC were also investigated. The non-proprietary UHPC was proportioned with 17% lightweight sand for internal curing. Test results indicated that the addition of 0.3% CNT or GNP led to approximately 20 MPa increase in compressive strengths of non-fibrous UHPC mortar and fibrous UHPC (2% steel fibers), compared to those prepared without any nanomaterial. Such enhancement is attributed …

Go to article

Evaluating The Low-Temperature Properties Of Asphalt Binders Extracted From Mixtures Containing Recycled Materials, Eslam Deef-Allah, Magdy Abdelrahman Mar 2022

Evaluating The Low-Temperature Properties Of Asphalt Binders Extracted From Mixtures Containing Recycled Materials, Eslam Deef-Allah, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The use of recycled materials − such as reclaimed asphalt pavement (RAP) and recycled asphalt shingles (RAS) − in asphalt mixtures reduces natural resources demands and decreases materials dumped in landfills. The aged binders included in the recycled materials alter binders' low-temperature properties included in asphalt mixtures. Therefore, asphalt binders were extracted from asphalt mixtures collected from the field as cores. Due to the limited amount of extracted asphalt binders (EABs), a dynamic shear rheometer was used to examine the low-temperature properties [e.g., true temperature (Tt), continuous temperature (Tc), and delta continuous temperature (ΔTc)]. Using recycled materials in asphalt mixtures …

Go to article

A Neural Network-Based Multivariate Seismic Classifier For Simultaneous Post-Earthquake Fragility Estimation And Damage Classification, Xinzhe Yuan, Genda Chen, Pu Jiao, Liujun Li, Jun Han, Haibin Zhang Mar 2022

A Neural Network-Based Multivariate Seismic Classifier For Simultaneous Post-Earthquake Fragility Estimation And Damage Classification, Xinzhe Yuan, Genda Chen, Pu Jiao, Liujun Li, Jun Han, Haibin Zhang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A scalar intensity measure (IM) could be insufficient to represent the earthquake intensity and variety in fragility estimation. Introducing multiple IMs to conventional regression of fragility functions can be computationally demanding and require priori assumptions of functional forms. In this study, multivariate seismic classifiers with multiple IMs as inputs are developed based on artificial neural networks (ANNs) to address the above disadvantages of traditional regression approaches. Case studies of a four-story code-conforming benchmark building indicate that fragility estimates from multi-IM ANN classifiers lead to higher accuracy (5.0% to 7.7%) in system-level and element-level damage classification than the single-IM traditional fragility …

Go to article

Components’ Exchanges Between Recycled Materials And Asphalt Binders In Asphalt Mixes, Eslam Deef-Allah, Magdy Abdelrahman, Mohyeldin Ragab Mar 2022

Components’ Exchanges Between Recycled Materials And Asphalt Binders In Asphalt Mixes, Eslam Deef-Allah, Magdy Abdelrahman, Mohyeldin Ragab

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The focus of this study was to explore the components' exchanges between recycled asphalt shingles (RAS) or reclaimed asphalt pavement (RAP) and virgin asphalt binders (VABs) in the asphalt mixes and to establish their effect on the rutting resistance of the extracted asphalt binders (EABs). Twelve plant mixes and twelve field mixes were gathered as examples of four Superpave mixes containing RAP or RAS. The plant mixes were reheated and compacted in the lab. The field mixes were collected as cores within 2 weeks after the ending of the construction process. The exchanged components were investigated using Fourier transform infrared …

Go to article

M&S Highlight: De Larrard Et Al. (1998) Fresh Concrete: A Herschel-Bulkley Material, Dimitri Feys Mar 2022

M&S Highlight: De Larrard Et Al. (1998) Fresh Concrete: A Herschel-Bulkley Material, Dimitri Feys

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Go to article

Influence Of Phosphorus Sources On The Compressive Strength And Microstructure Of Ferronickel Slag-Based Magnesium Phosphate Cement, Cuirong Yan, Hongyan Ma, Zhongqiu Luo, Xintao Zhou, Luxing Wang Mar 2022

Influence Of Phosphorus Sources On The Compressive Strength And Microstructure Of Ferronickel Slag-Based Magnesium Phosphate Cement, Cuirong Yan, Hongyan Ma, Zhongqiu Luo, Xintao Zhou, Luxing Wang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Electric furnace ferronickel slag (EFS) is a typical magnesium-rich industrial by-product discharged from the manufacture of nickel and iron-nickel alloys. The approach to use it as the raw material for the preparation of magnesium phosphate cement (MPC) has potential and proves effec-tive. In this study, three different phosphorus sources (PS) including phosphoric acid (H3 PO4, PA), sodium dihydrogen phosphate (NaH2 PO4, SDP) and potassium dihydrogen phosphate (KH2 PO4, PDP) were used to react with EFS to prepare the EFS-based MPC (EMPC), and the effects of raw material mass ratio (EFS/PA, EFS/SDP, EFS/PDP) on the compressive strength, early hydration temperature and …

Go to article

Simplified Analytical Model To Assess Key Factors Influenced By Fiber Alignment And Their Effect On Tensile Performance Of Uhpc, Le Teng, Huanghuang Huang, Kamal Khayat, Xiaojian Gao Mar 2022

Simplified Analytical Model To Assess Key Factors Influenced By Fiber Alignment And Their Effect On Tensile Performance Of Uhpc, Le Teng, Huanghuang Huang, Kamal Khayat, Xiaojian Gao

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The increase in single-fiber pullout strength usually improves tensile strength and toughness of UHPC. An increase in fiber orientation angle (θ) up to 45° to the direction of pullout load was found to enhance the single-fiber pullout strength. However, such increase in predominant θ value along tensile strength specimens led to a reduction in tensile strength of UHPC. In order to elucidate this controversial observation, analytical models combined with experiments were carried out to assess the key factors influencing the tensile properties of UHPC due to variations of fiber orientation. The test parameters involved the evaluation of the effect of …

Go to article

Revealing Bluff-Body Aerodynamics On Low-Rise Buildings Under Tornadic Winds Using Numerical Laboratory Tornado Simulator, Ryan Honerkamp, Guirong Grace Yan, John Van De Lindt Mar 2022

Revealing Bluff-Body Aerodynamics On Low-Rise Buildings Under Tornadic Winds Using Numerical Laboratory Tornado Simulator, Ryan Honerkamp, Guirong Grace Yan, John Van De Lindt

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Tornadoes result in death and property loss in communities around the world. To quantify the actions of tornadoes on civil structures, researchers have built physical laboratory tornado simulators to simulate tornadoes in the lab environment and tested building models in the simulated tornadic wind field, which is similar to wind tunnel testing when quantifying the wind effects induced by straight-line winds. Unfortunately, physical tornado simulators are much less common than straight-line wind tunnels, leading to the lack of research on bluff-body aerodynamics on civil structures under tornadic winds. Considering that it is expensive to conduct experimental testing in physical tornado …

Go to article

Bc-Dunet-Based Segmentation Of Fine Cracks In Bridges Under A Complex Background, Tao Liu, Liangji Zhang, Guoxiong Zhou, Weiwei Cai, Chuang Cai, Liujun Li Mar 2022

Bc-Dunet-Based Segmentation Of Fine Cracks In Bridges Under A Complex Background, Tao Liu, Liangji Zhang, Guoxiong Zhou, Weiwei Cai, Chuang Cai, Liujun Li

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Crack is the external expression form of potential safety risks in bridge construction. Currently, automatic detection and segmentation of bridge cracks remains the top priority of civil engineers. With the development of image segmentation techniques based on convolutional neural networks, new opportunities emerge in bridge crack detection. Traditional bridge crack detection methods are vulnerable to complex background and small cracks, which is difficult to achieve effective segmentation. This study presents a bridge crack segmentation method based on a densely connected U-Net network (BC-DUnet) with a background elimination module and cross-attention mechanism. First, a dense connected feature extraction model (DCFEM) integrating …

Go to article

Spatiotemporal Analysis Of Urban Road Congestion During And Post Covid-19 Pandemic In Shanghai, China, Pengfei Xu, Weifeng Li, Xianbiao Hu, Hangbin Wu, Jian Li Mar 2022

Spatiotemporal Analysis Of Urban Road Congestion During And Post Covid-19 Pandemic In Shanghai, China, Pengfei Xu, Weifeng Li, Xianbiao Hu, Hangbin Wu, Jian Li

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Coronavirus Disease 2019 (COVID-19) has become one of the most serious global health crises in decades and tremendously influence the human mobility. Many residents changed their travel behavior during and after the pandemic, especially for a certain percentage of public transport users who chose to drive their owned vehicles. Thus, urban roadway congestion has been getting worse, and the spatiotemporal congestion patterns has changed significantly. Understanding spatiotemporal heterogeneity of urban roadway congestion during and post the pandemic is essential for mobility management. In this study, an analytical framework was proposed to investigate the spatiotemporal heterogeneity of urban roadway congestion in …

Go to article

A Case Study Of Community-Engaged Design: Creating Parametric Insurance To Meet The Safety Needs Of Fisherfolk In The Caribbean, Daniel B. Oerther Mar 2022

A Case Study Of Community-Engaged Design: Creating Parametric Insurance To Meet The Safety Needs Of Fisherfolk In The Caribbean, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The creation of the Caribbean Ocean and Aquaculture Sustainability faciliTy (COAST) is used as a case study of community-engaged design addressing safety needs. COAST is a parametric insurance product, sold to national governments, which was designed to meet the food and nutrition security of small- and medium-scale fisherfolk. The design of COAST is an example of convergence research, where the discipline of engineering was integrated with another discipline to solve pressing societal needs of Caribbean fisherfolk. This case study demonstrates that community-engaged design helps to (1) identify and include historically underrepresented stakeholders, (2) emphasize the importance of professional responsibility for …

Go to article

Solving The Negative Earnings Dilemma Of Multistage Bidding In Public Construction And Infrastructure Projects: A Game Theory-Based Approach, Muaz O. Ahmed, Islam H. El-Adaway, Kalyn T. Coatney Mar 2022

Solving The Negative Earnings Dilemma Of Multistage Bidding In Public Construction And Infrastructure Projects: A Game Theory-Based Approach, Muaz O. Ahmed, Islam H. El-Adaway, Kalyn T. Coatney

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

With the tremendous increase in spending on public projects, contractors need to employ efficient and effective bidding strategies to cope with the competitive bidding environment. Usually, general contractors carry a portion of the work and subcontract other parts to eventually submit a holistic joint bid. This bidding setting is referred to as multistage bidding where subcontractors submit their quotations/bids to the general contractor, after which the general contractor submits a final joint bid for the whole project. In a multistage bidding environment, general contractors may be faced with an increase in the probability of negative or below normal profits. Despite …

Go to article

Understanding Effects Of Permafrost Degradation And Coastal Erosion On Civil Infrastructure In Arctic Coastal Villages: A Community Survey And Knowledge Co-Production, Min Liew, Ming Xiao, Louise Farquharson, Dmitry Nicolsky, Anne Jensen, Vladimir Romanovsky, Jana Peirce, Lilian Alessa, Christopher Mccomb, Xiong Zhang, Benjamin Jones Mar 2022

Understanding Effects Of Permafrost Degradation And Coastal Erosion On Civil Infrastructure In Arctic Coastal Villages: A Community Survey And Knowledge Co-Production, Min Liew, Ming Xiao, Louise Farquharson, Dmitry Nicolsky, Anne Jensen, Vladimir Romanovsky, Jana Peirce, Lilian Alessa, Christopher Mccomb, Xiong Zhang, Benjamin Jones

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper presents the results of a community survey that was designed to better under-stand the effects of permafrost degradation and coastal erosion on civil infrastructure. Observations were collected from residents in four Arctic coastal communities: Point Lay, Wainwright, Utqiaġvik, and Kaktovik. All four communities are underlain by continuous ice-rich permafrost with varying degrees of degradation and coastal erosion. The types, locations, and periods of observed permafrost thaw and coastal erosion were elicited. Survey participants also reported the types of civil infrastructure being affected by permafrost degradation and coastal erosion and any damage to residential buildings. Most survey participants reported …

Go to article

Design, Dynamic Performance And Ecological Efficiency Of Fiber-Reinforced Mortars With Different Binder Systems: Ordinary Portland Cement, Limestone Calcined Clay Cement And Alkali-Activated Slag, Wu Jian Long, Zhuorui Wu, Kamal Khayat, Jingjie Wei, Biqin Dong, Feng Xing, Jinrui Zhang Feb 2022

Design, Dynamic Performance And Ecological Efficiency Of Fiber-Reinforced Mortars With Different Binder Systems: Ordinary Portland Cement, Limestone Calcined Clay Cement And Alkali-Activated Slag, Wu Jian Long, Zhuorui Wu, Kamal Khayat, Jingjie Wei, Biqin Dong, Feng Xing, Jinrui Zhang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The dynamic mechanical properties and ecological efficiency of cement-based composites are of vital importance to the development of green building materials and dynamic loadings resistance. In this study, the dynamic mechanical properties, ecological and economic efficiency of fiber-reinforced mortars (FRMs) made with different binder systems, including ordinary Portland cement (OPC), limestone calcined clay cement (LC3), and alkali-activated slag (AAS), were compared. In addition, different rheological parameters were designed to evaluate the dynamic mechanical properties of FRMs. The fiber pull-out testing, Barrett-Joyner-Halenda (BJH) testing, and scanning electron microscope (SEM) were used to reveal the difference in the dynamic mechanical properties of …

Go to article

Dynamical Properties Of Environmental High-Performance Composites With Calcined Clay, Jingjie Wei, Wu Jian Long, Kamal Khayat, Biqin Dong, Liu Mei, Feng Xing Feb 2022

Dynamical Properties Of Environmental High-Performance Composites With Calcined Clay, Jingjie Wei, Wu Jian Long, Kamal Khayat, Biqin Dong, Liu Mei, Feng Xing

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Concrete structures may be exposed to dynamic loadings within short periods such as earthquakes and vehicles load, resulting in substantial damage to human life and property because of the collapse of concrete structures. The research achievements on dynamic properties of high-performance composites with LC3 (HPC-LC3) are limited, although dynamic loadings are commonly encountered in infrastructure. The study aims to develop a new-green concrete product (HPC-LC3) with high dynamical properties and promote its mass use in a vibration service environment by investigating dynamical properties of HPC-LC3. Dynamical properties of structure can be promoted at material level by means of enhancing the …

Go to article

Setting Times Of Early-Age Mortars Determined From Evolution Curves Of Poisson’S Ratio, Bate Bate, Xiao Chen, Chao Chen, Hongyan Ma, Jianfeng Zhu, Junnan Cao, Jiakai Chen, Kamal Khayat, Shuai Zhang Feb 2022

Setting Times Of Early-Age Mortars Determined From Evolution Curves Of Poisson’S Ratio, Bate Bate, Xiao Chen, Chao Chen, Hongyan Ma, Jianfeng Zhu, Junnan Cao, Jiakai Chen, Kamal Khayat, Shuai Zhang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Setting times, as the early-age properties of cement-based materials, are important properties to ensure the quality and long-term performance of engineering structures. To determine the initial and final setting times of cementitious materials, the compressive wave velocity and shear wave velocity of six early-age mortar samples were monitored. Their time evolution curves of Young's modulus, shear modulus, bulk modulus, and Poisson's ratio were then calculated and analyzed. The signature times of the derivatives of the Poisson's ratio evolution curves correlate well with the initial and final setting times, and the remarkably high coefficient of determination values relative to the data …

Go to article

Water Film Depth Prediction Model For Highly Textured Pavement Surface Drainage, Alireza Pourhassan, Ahmed A. Gheni, Mohamed Elgawady Feb 2022

Water Film Depth Prediction Model For Highly Textured Pavement Surface Drainage, Alireza Pourhassan, Ahmed A. Gheni, Mohamed Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Water film depth (WFD) is an important factor for road traffic safety because of its direct connection with skid resistance, hydroplaning speed, and the tendency of splash and spray. Increasing the pavement macrotexture reduces WFD. However, existing models for WFD prediction have not been developed on highly textured surfaces such as chip seal. Furthermore, the rainfall intensities used for developing most of these models were relatively low, leaving no or low WFD on chip seal surfaces. To propose a WFD prediction model suitable for highly textured surfaces and to consider the effect of surface material type, an experimental study was …

Go to article

Developing Mix Proportions For Class C Fly Ash-Based Alkali-Activated 3d-Printed Concrete Mixtures, Fareh Abudawaba, Eslam Gomaa, Ahmed Gheni, Mohamed Elgawady Feb 2022

Developing Mix Proportions For Class C Fly Ash-Based Alkali-Activated 3d-Printed Concrete Mixtures, Fareh Abudawaba, Eslam Gomaa, Ahmed Gheni, Mohamed Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study investigated the use of class C fly ash (FA) as a precursor for alkali-activated mortar (AAM) for 3D-printed concrete (3DPC). AAMs with different water-to-FA (W/FA), alkaline activator-to-FA (Alk/FA), and sodium silicate-to-sodium hydroxide (SS/SH) ratios were examined to develop mixtures that can be tailored for different structural applications of 3DPC. The fresh properties, including extrudability and buildability, were evaluated through the open time (OT) and immediate deformation tests, respectively. Different cycle times (CTs) were applied to achieve a strain limit state necessary to maintain the printed shape. The strength of AAMs in different directions at different CTs was examined. …

Go to article

A Global Survey Of Infection Control And Mitigation Measures For Combating The Transmission Of Covid-19 Pandemic In Buildings Under Facilities Management Services, Hadi Sarvari, Zhen Chen, Daniel W. M. Chan, Ellyn A. Lester, Nordin Yahaya, Hala Nassereddine, Aynaz Lotfata Jan 2022

A Global Survey Of Infection Control And Mitigation Measures For Combating The Transmission Of Covid-19 Pandemic In Buildings Under Facilities Management Services, Hadi Sarvari, Zhen Chen, Daniel W. M. Chan, Ellyn A. Lester, Nordin Yahaya, Hala Nassereddine, Aynaz Lotfata

Civil Engineering Faculty Publications

Facilities management along with health care are two important aspects in controlling the spread of infectious diseases with regard to controlling the outbreak of global COVID-19 pandemic. Hence, with the increasing outbreak of COVID-19 pandemic, the importance of examining the relationship between the built environment and the outbreak of infectious diseases has become more significant. The aim of the research described in this article is to develop effective infection control and mitigation measures to prevent the transmission of COVID-19 pandemic in the built environment. This study seeks to answer the question of how the facilities management industry can help reduce …

Go to article

Strategic Energy Master Planning For Carbon Neutrality, Marie Patterson Jan 2022

Strategic Energy Master Planning For Carbon Neutrality, Marie Patterson

CSU Journal of Sustainability and Climate Change

Universities across the United States are generating goals to be more sustainable and carbon neutral. The energy used in existing buildings on campuses amount to a large volume of greenhouse emissions and must be reduced to help achieve neutrality goals. Strategic Energy Master Plans are instrumental to support these goals through the development of recommendations to reduce energy. Calculating the energy use intensity for existing buildings, a main component of a Strategic Energy Master Plan, can help the campus understand where energy is being used the most. With this information the highest energy consuming buildings can be the focus of …

Go to article

First Prev Next Last