Architectural Engineering Commons^™

A Spike-Shaped Anchorage For Steel Reinforced Polymer (Srp)-Strengthened Concrete Structures, Xingxing Zou, Keenan L. Mcburney, Lesley H. Sneed

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Steel reinforced polymer (SRP) composite has recently emerged as an effective and economical solution for strengthening of reinforced concrete (RC) structures. Premature debonding failure of unanchored SRP at low load levels generally governs the performance of RC structures strengthened with externally bonded SRP. Therefore, a novel yet simple spike-shaped anchorage system was proposed in this study to prevent the debonding failure of SRP and to improve the interfacial shear capacity. Experimental investigation through single-lap shear tests of SRP-concrete joints showed that the anchorage system changed the failure mode from composite debonding to fiber rupture. In addition, the anchorage system substantially …

Experiential Learning And Exposure To Professional Experience In Civil Engineering Education, Sanjay Tewari

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Experiential learning is increasingly recognized as a crucial component of modern education, especially in fields like civil engineering, where practical skills and real-world exposure are paramount. This paper explores the various avenues through which civil engineering education can offer professional exposure and experiential learning opportunities. By analyzing the impact of senior seminars, internships, co-ops, undergraduate research, study abroad programs, service learning, student design teams, leadership positions, and involvement in technical and professional student organizations, this paper aims to underscore the importance of these approaches in shaping well-rounded and industry-ready civil engineers.

Effect Of Internal Curing And Shrinkage-Mitigating Materials On Microstructural Characteristics Of Fiber-Reinforced Mortar, Kamran Aghaee, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Internal curing (IC) and other shrinkage mitigating materials are employed to reduce shrinkage and risk of cracking. This study investigates the efficiency of individual versus combined use of IC and shrinkage mitigating materials on key characteristics of fiber-reinforced mortar (FRM). The investigated mixtures include a 25% pre-saturated lightweight sand (LWS) that is added individually and combined with 10% CaO-based expansive agent (EA) and 2% shrinkage reducing admixture (SRA). This elucidates the synergistic effect of high content IC and EA/SRA on macro- and micro-mechanical characteristics of FRM, especially at the interface of the matrix with fibers. Mechanical properties, microstructural characteristics, and …

Viscoelastic Properties Of Fresh Cement Paste: Measuring Procedures And Influencing Parameters, Ammar Yahia, Arnaud Perrot, Dimitri Feys, Kamal Khayat, Mohammed Sonebi, Shiho Kawashima, Wolfram Schmidt

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Fresh cement pastes behave as viscoelastic materials below the flow onset. The measurements of viscoelastic properties of fresh cement paste provide valuable insight into the dispersion of solid particles as well as the hydration kinetics at early age and its influence on the structural evolution and solidification behavior at quasi-static conditions. Monitoring the development of viscoelastic properties of fresh cement paste using dynamic oscillatory shear measurements can also elucidate the working mechanisms of chemical admixtures. These properties are efficient indicators to guide mixture proportion design and are necessary to understand the rheology and stability of concrete. In this paper, the …

Prediction Of Compressive Strength And Evaluation Of Different Theoretical Standards And Proposed Models Of Brick Columns Confined With Frp, Frcm, Or Srg System, Zuhair Al-Jaberi, John J. Myers

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Strength Capacity of Confined Masonry Column is One of the Topics that Need to Be Studied. in This Study, the Efficiency of using Different Types of Advanced Composite (Non-Corrosive Materials) Such as Fiber Reinforced Polymer (FRP), Fiber Reinforced Cementitious Matrix (FRCM), or Steel Reinforced Grout (SRG) in Confining Masonry Columns is Investigated. a Wide Range of Experimental Database of Masonry Column Specimens Has Been Collected from the Results that Available in Scientific Literatures. Different Theoretical Standards and Proposed Models that Used to Predict the Capacity of Masonry Columns Confined with FRP and FRCM Are Evaluated based on Collected Experimental …

On The Development Of Part-Scale Fem Modeling For Laser Powder Bed Fusion Of Aisi 316l Stainless Steel With Experimental Verification, Muhammad Arif Mahmood, Asif Ur Rehman, M. Mustafa Azeem, Abedalkader Alkhouzaam, Marwan Khraisheh

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In laser powder bed fusion (LPBF), the effects of operating conditions on thermal gradients and residual stresses are the utmost challenges that require significant attention. The magnitudes of residual stress in the printed layers, as well as the distribution along the printed components, have not been well explained for LPBF parts. In this study, a 3D finite element thermo-mechanical model has been established to investigate the effect of operating conditions on thermal distribution, melt pool evolution, residual stress distribution, and part distortion. The printed AISI 316L stainless steel cubes have been characterized experimentally. The results showed a proportional correlation among …

Rejuvenation Effect Of Aged Sbs-Modified Asphalt Utilizing Molecule Analysis, Ke Shi, Feng Ma, Jenny Liu, Zhen Fu, Ruimeng Song, Dongdong Yuan, Chen Li

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Performance of Styrene-Butadiene-Styrene Modified Asphalt (SBSMA) is Significantly Impacted by its Aging and Regeneration. in This Research, the Molecular Dynamics Simulation Was Utilized to Investigate the Rejuvenation Effect of Active Reagents on Aged SBS Modified Asphalt through the Following Tasks: 1) Verifying the Accuracy of the Asphalt Model by Density and Solubility Parameters; 2) Assessing the Changes in the Rejuvenated Asphalt Model's Energetic Parameters and Volume Parameters, 3) Studying the Interaction Energy between SBS Molecules and Asphalt Molecule Models, and 4) Evaluating the Relative Concentration, Interfacial Interaction Energy, and Diffusion Effect of the Asphalt-Asphalt Models. the Results Indicated that …

Toward Low Carbon Footprint And Lightweight Masonry Alkali-Activated Material, Zina Ebrahim, Mohammad Mastali, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

The portland cement concrete industry and the masonry industry are undergoing changes in response to skilled labor shortages and concerns over climate and pollution. There may be interest from parts of the industry in lower carbon footprint and lightweight masonry products. Toward this aim, the use of hemp shiv--the woody core of the hemp plant--in alkali-activated concrete was investigated herein and shown to have a wide range of impacts on the hardened state characteristics of a material suitable for structural concrete masonry units (CMUs) in accordance with ASTM C90 requirements. Hemp shiv is well known for its use in hempcrete, …

Automated Detection And Characterization Of Cracks On Concrete Using Laser Scanning, Yunfeng Ge, Jenny Liu, Xiong Zhang, Huiming Tang, Xiaolong Xia

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Accurate crack detection and characterization on concrete are essential for the maintenance, safety, and serviceability of various infrastructures. In this paper, an innovative approach was developed to automatically measure the cracks from 3D point clouds collected by a phase-shift terrestrial laser scanner (TLS) (FARO Focus3D S120). The approach integrates several techniques to characterize the cracks, which include the deviation on point normal determined using k-nearest neighbor (kNN) and principal components analysis (PCA) algorithms to identify the cracks, and principal axes and curve skeletons of cracks to determine the projected and real dimensions of cracks, respectively. The coordinate transformation was then …

Field Implementation And Performance Of Fiber-Reinforced Low-Shrinkage Concrete For Bridge Deck Construction, Ahmed Abdelrazik, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This Paper Reports on the Field Implementation of Fiber-Reinforced Concrete (FRC) Used for Redecking the Two-Span overpass Bridge in Missouri. the Spans Measured 38.4 and 35.05 M in Length. Modeling of the Structural Behavior of the Bridge Replacement Deck Indicated Significantly High Tensile Stresses at Midspan (Up to 45 MPa) Due to the Continuity of the Deck over the Four Precast Main Girders. Redecking of the Bridge and Casting of the Central Diaphragm Were Carried Out Continuously and Necessitated 40 Concrete Truck Deliveries of 252 M3 of FRC. Six Sensor Towers Were Installed in the Bridge Deck to Monitor Variations …

Rilem Tc 266-Mrp: Round-Robin Rheological Tests On High Performance Mortar And Concrete With Adapted Rheology—A Comprehensive Flow Curve Analysis, Dimitri Feys, Helena Keller, Khadija El Cheikh, Egor Secrieru, Yannick Vanhove

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A comprehensive testing program was carried out to compare the rheological properties of flowable concrete that can be obtained from different rheometers. The results obtained from seven rheometers using vane or similar geometries are discussed. A comprehensive flow curve analysis is undertaken for further comparison of the various rheometers. Partially, large differences could be observed between the results obtained from the different rheometers. However, the device-specific trendlines are shown to have significant correlations with the overall baseline. Two potential causes of differences between results are highlighted: imposition/registration of torque/rotational velocity and discrepancies between the measured material flow behavior in the …

Preliminary Bond Capacity Exploration Between Monolayer Graphene And Cementitious Composites, Yanping Zhu, Chuanrui Guo, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This Study Aims to Explore Bond Capacity between Monolayer Graphene and Cementitious Composites for the First Time through a Pullout Test. the Low-Pressure Chemical Vapor Deposition Method Was Used to Synthesize Monolayer Graphene on the Copper Substrate to Be Embedded in the Mortar Made by the Briquette Mold. the Bond Capacity between Them Was Higher Than the Tensile Strength of the Copper Sheet with As-Grown Monolayer Graphene on the Surface Since All Specimens Failed in Fracture with Embedment Length of More Than 30 Mm. the Monolayer Graphene Enhanced the Copper Tensile Fracture Stress and Normalized Energy during the Test as …

Sustainability In Concrete Masonry With Natural Pozzolans, Ceiley L. Davis

Architectural Engineering: Graduate Reports

To achieve greater sustainability in masonry construction for the Western market it is common to replace masonry grout's partial cement content with waste pozzolans. As waste pozzolans are in limited supply, as the coal burning market in the West diminishes, this research investigates viable grout mixtures which replace cement with Natural Pozzolans, a more plentiful sustainable replacement. The present work investigated the percentage of Natural Pozzolans that can be partially substituted for cement for grout mixtures to achieve an axial compressive strength of 2000psi within 28 and 56 days of curing. To determine efficacy per ASTM 476-22, “Standards Specifications for …

Xenabloom, Sophia Maglabe, Ryer Lauth, Elizabeth Shaw, Sheyna Rongong

Architectural Engineering

Proposal for an architectural and structural design of a shade structure at the Leaning Pine Arboretum, employing the Xenaform typology of Poly Shells, LLC.

Investigation Of Natural Pozzolans: Analyzing The Practicality Of Natural Pozzolans As A Partial Substitute For Cement In Grout Production, Jadyn I. Breien, Andrew J. Baro, Logan T. Marino

Architectural Engineering

This senior project aims to investigate whether natural pozzolans are more sustainable than fly ash and a sufficient substitute for cement in the production of grout. By following the intent of the ASTM (American Society of Testing and Materials) standards, a conclusion will be made to determine if natural pozzolans can contribute comparable strength in compression. The objective is to prove that natural pozzolans should be utilized in the production of grout rather than alternatives such as fly ash because it can provide similar strength while being more economical and more sustainable.

The Center For Centering Dome, Olek Piechaczek, Ryan M. Scharf

Architectural Engineering

The Center for Centering seeks to create a large-scale healing center, conducive to individual centering of the mind and body. This mobile installation provides a relaxing, enclosed space while still maintaining a connection to the outdoors. The clients liked the idea of having a pop-up installation that could be easily set up as a touring display. With a deadline for installation looming in June 2022, a team of students had five months to design and manufacture the structure.

In winter 2022, the students developed custom geometry to minimize the number of individual parts and built a ¼ scale model of …

Attainable And Sustainable Home Building Solutions, Katrina Matthews

Construction Management

Sustainability has fortunately been a recent concern in the construction industry as climate change continues to impose potentially insurmountable threats to the global environment. Although many new methods have been adopted in efforts to lessen the adverse environmental effects of construction-related activities, as a society, we still have much room for growth as the built environment accounts for almost 50% of global emissions. Many changes and standards must be adopted to make these solutions efficiently beneficial. To set industry standards, we must start with the most basic form of construction- residential building. This report covers two attainable framing solutions for …

Development Of The New Hasslein Caed Collaborative, Catie Dines

Construction Management

This paper outlines the development and execution of the new Hasslein CAED Collaborative student competition which engages students of all five majors in the College of Architecture and Environmental Design in a Request for Proposal style competition. CAED houses students studying Architecture, Architectural Engineering, City and Regional Planning, Construction Management, and Landscape Architecture. There is little opportunity for interdisciplinary collaboration within the CAED, despite our future career paths being heavily intertwined. This competition followed research by Greta Stout, class of 2022, on the benefits and support of interdisciplinary collaboration at Cal Poly SLO in CAED. The competition is named after …

Floating Dock At Santa Rita Ranch: A Design And Cost Estimate Package Prepared For The Land Conservancy Of San Luis Obispo, Sophia Ann Federico

Construction Management

The purpose of this project is to provide the Land Conservancy of San Luis Obispo with three design options for a floating fishing/boat dock system that they want to build on a small lake located on a plot of land that they own and preserve called Santa Rita Ranch. The design package that I created includes drawings, weight and buoyancy calculations, a cost estimate, and product specs. My approach was to utilize my estimating skills that I have acquired from my construction management classes and from my work at a general contractor’s office in the preconstruction department. The design and …

Using Bim To Increase The Efficiency Of Energy-Driven Retrofitting Projects, Anne Grego, Shannon Chance, Barry Mcauley

Conference Papers

The building sector is responsible for nearly 40% of global energy consumption. Many existing buildings have poor thermal insulation and low energy performance, hindering sustainability goals. Energy-driven building retrofitting could address this issue and implementing Building Information Modelling (BIM) in retrofitting can reduce process time, costs, and waste associated with such undertakings. Yet, there is a lack of research and insufficient guidance for implementing BIM in energy-driven retrofitting. A BIM framework is presented to enhance decision-making processes during retrofitting. The aims of this study were to (1) identify BIM technologies and methodologies that could address existing barriers and improve efficiency …

3d Printing Of Earthen Materials: Toward The Carbon-Zero Construction, Shiva Bhusal

Civil Engineering ETDs

In recent years, digital manufacturing techniques in the architecture and construction industry have rapidly gained attention, especially with 3D printing, also called additive manufacturing. The use of cement has been common in modern construction and is now being explored for 3D printing. However, due to cement's contribution to approximately 7 percent of global carbon emissions and its high cost, research on sustainable and greener materials has gained attention. Previous studies on alternative construction have examined the mechanical and rheological properties of soil mixes, but not much attention has been given to printability evaluation, shrinkage, and cracking, which can affect the …

Predicting The Friction Coefficient Of High-Friction Surface Treatment Application Aggregates Using The Aggregates' Characteristics, Ahmed S. El-Ashwah, Korrenn Broaddus, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Providing Sufficient Pavement Surface Friction (I.e., Skid Resistance) between Vehicle Tires and Pavement Surface throughout the Pavement Service Life is Considered to Be One of the Main Objectives of Highway Design. Moreover, Vehicle Safety, the Amount of Consumed Fuel, and the Wearing Rate of Vehicle Tires Generally Are Influenced by Pavement Surface Friction. in This Study, a Comprehensive Experimental Testing Program Was Conducted on Different Aggregate Sources, Including Calcined Bauxite and Five Alternative Local Sources, to Assess their Friction Characteristics. the Testing Program Included a British Pendulum Tester (BPT) and a Dynamic Friction Tester (DFT), Which Were Used to Evaluate …

Rilem Tc 266-Mrp: Round-Robin Rheological Tests On High Performance Mortar And Concrete With Adapted Rheology—Rheometers, Mixtures And Procedures, Dimitri Feys, Mohammed Sonebi, Sofiane Amziane, Chafika Djelal, Khadija El-Cheikh, Shirin Fataei, Markus Greim, Irina Ivanova, Helena Keller, Kamal Khayat, Laurent Libessart, Viktor Mechtcherine, Ivan Navarrete, Arnaud Perrot

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Recent developments in understanding the rheology of mortar and concrete as well as applying this understanding in the practice of construction necessitate an accurate assessment of materials' rheological properties. It is well known that different rheometers for mortar and concrete deliver different results, as this was shown over 15 years ago in two measuring campaigns comparing concrete rheometers. Considering newly developed rheometers, including those to evaluate interface rheology and structural build-up at rest, as well as additional measurement procedures and data interpretation techniques, a new comparison campaign was carried out in 2018 at the Université d'Artois, in Bethune, France. This …

Characterizing Energy Dissipation Of Shallow-Water Wave Breaking In A Storm Surge, Hunter Boswell, Guirong Grace Yan, Wouter Mostert

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

While understanding breaking waves is crucial for the development of parametrizations used in ocean wave modeling for both deep and shallow water, the complete process of wave breaking is not well understood. Here we present direct numerical simulations of two-dimensional solitary waves that shoal and break on a uniform beach in shallow water, with the presence of storm surge represented by an inshore region. The storm surge depth, beach slope, and wave amplitude are varied to study the dependence of energy dissipation in the breaker on wave and bathymetric parameters. We classify wave breaker types and find a separation between …

Slo Botanical Garden Deck, Noah E. Demer

Architectural Engineering

This project consists of the design and construction of an outdoor-use deck. This deck is to be located in the NE corner of the Sage Meadow at the San Luis Obispo Botanical Garden at 3450 Dairy Creek Rd, San Luis Obispo, CA 93405. This deck’s intended use is as a gathering area for people to congregate. Originally, the ideal deck area was proposed as 700+ square feet, but with further site and project limitations the final design was ~480 square feet. This deck has not been constructed.

The Bridge Newsletter Spring 2023, Missouri University Of Science And Technology

The Bridge Newsletter

-Virtual reality in architectural engineering
-Steel Bridge team wins fifth consecutive competition
-S&T Volleyball star ‘jumps’ at research opportunity
-Benavides legacy continues

A Unified Two Independent Stress Variable Approach To Moisture-Change-Induced Unsaturated Soil Volume Change, Sandra Houston, Xiong Zhang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In 1968, Matyas and Radhakrishna introduced the concept of the state surface, demonstrating that unsaturated soil volume change is dependent on two independent stress state variables, net total stress and suction. For decades the basic theory of unsaturated soils has been known, and a holistic view of the elastoplastic response of unsaturated soils, based on a modified state surface approach (MSSA), makes it clear that a method accounting for independent roles of net total stress and suction is required to quantify volume change of unsaturated soils. Still, reliance on pre-unsaturated-soil-mechanics-era methods persists, particularly within the geotechnical practice community. Unsaturated soil …

Calibration Of Bbm Parameters Using The Modified State Surface Approach, Xiong Zhang, Beshoy Riad, Eduardo E. Alonso

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Barcelona Basic Model (BBM) developed by Alonso et al. [1] is the first and the mostwidely used elasto-plastic model for unsaturated soils. The BBM successfully explained many key features of unsaturated soils and received extensive acceptance. However, there is lack of a well-establishedmethod for selecting parameter values for the BBM from laboratory tests, although a variety of methods have been recently developed for calibrating model parameters for the BBM. Concerns still exist on the correctness and robustness of such parameter value selection procedures. The above statements were evidenced by a recent benchmark exercise on selection of parameter values for …

Lunar In-Situ Aluminum Production Through Molten Salt Electrolysis (Lisap-Mse), Jacob Ortega, Jeffrey D. Smith, Fateme Rezaei, David Bayless, William P. Schonberg, Daniel S. Stutts, Daoru Frank Han

NASA-Missouri Space Grant Consortium

The goal of Artemis is to establish a sustained presence on the Moon. To achieve so, numerous resources are necessary. The Moon contains several essential elements needed to sustain human presence. Most of those elements are trapped in the form of minerals. To refine those minerals into useful materials, reduction methods are needed. Most reduction methods on Earth require large amounts of mass and power which is unrealistic for early stages of building a lunar base. To solve this problem, we are developing a concept of Lunar In-Situ Aluminum Production through Molten Salt Electrolysis (LISAP-MSE).

The LISAP-MSE project, if successful, …

Performance Assessment Of Bioasphalt Mixtures Containing Guayule Resin As An Innovative Biobased Asphalt Alternative, Ahmed Hemida, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Guayule resin was investigated through mixture to assess its role in the field performance. For performance comparisons, conventional asphalt, neat guayule, asphalt-rubber-guayule, and guayule-rubber binders were implied. Field-simulated lab mixtures were made to investigate the major distresses. Modified Lottman, rut, semicircular bending, and disk-shaped compact tension tests were used to assess stripping, rutting, fatigue, and thermal cracking resistances. Stripping and rutting susceptibilities were also assessed by Hamburg wheel-tracking test. The outcomes disclosed that when the modified Lottman test was used, guayule containing a 7% air content was more susceptible to stripping than that containing a 3.5% air content, resulting in …