Architecture Commons^™

The Wisdom Of Cultural Mapping In Reparative Planning — City In The Woods: Mapping Of Cherokee Village, Arkansas, Stephen Luoni

Community Design Center Faculty Publications and Presentations

As communities and design professionals confront complex cultural issues in planning, new tools are needed to introduce interdisciplinary cultural inquiry into urban design/planning. Reparative planning is premised on a reckoning with socio-economic and environmental decline through design of the built environment. Cultural mapping is necessary to both visibilize suppressed narratives behind decline and inequity, as well as underwrite new policy and development approaches. City in the Woods is a cultural mapping project that supports planning for Cherokee Village. Moving beyond the map as object to mapping as a process, we employed the deep map to sketch a memoir of place …

Three-Dimensionalization Mediates The Subjective Experience Of Fractal Interior Spaces, Joori Suh, William Stalker, Steen Pedersen, Assaf Harel

Psychology Faculty Publications

A fractal, a self-similar organic or geometric pattern that repeats at varying scales, is one of the most compelling characteristics found in nature. Previous studies on fractal patterns have demonstrated consistent trends in potential psychological benefits, such as stress reduction. However, we fall short of understanding one of the essential properties of fractals found in nature, i.e., the three-dimensionality of their appearance. In this study, we aimed at understanding the role of the three-dimensionalization of fractal patterns in spatial structures on human subjective perceptual experience. Two hundred seventy three-dimensional spatial prototype models were created for this study, spanning two dimensions: …

Los Molinitos De La Gente: Arquitectura Popular En El Río Grande Del Norte, 1600-1950, José A. Rivera, Levi Romero

Faculty Publications

For centuries, acequias and small grist mills in northern New Mexico villages played a major role in the agricultural economy of the region following the introduction of wheat from the Old World to the Americas. Wheat, in its ground form as flour, was a staple during the Spanish colonial period of the region. To process raw wheat, local mills (molinos) were essential infrastructure as were the acequias (ditches) that powered them. Most molinos were built from logs and were situated near the banks of watercourses. The wheel and axle were driven by the gravity force of water drawn …

Reduction In Scc Form Pressure Through In-Situ Co2 Mineralization, Sean Monkman, Soo Duck Hwang, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

One challenge of using self-consolidating concrete (SCC) for cast-in-place structural applications is that the rheological properties of the concrete (low yield stress and low plastic viscosity) can lead to increased lateral pressure exerted on the formwork. High structural build up and thixotropy can reduce the lateral pressure, thereby allowing for simpler formwork and faster construction. The addition of CO₂ to SCC, in proportions from 0.063 % to 0.250 %, by weight of cement, was investigated as a rheology modifier. The CO₂ served to increase the plastic viscosity with little impact on the dynamic yield stress up to a …

Interview! Virgil Abloh! By Chuck Anderson And Benjamin Edgar (Internet Journal, Issue 001: 17-22, 2024), Benjamin Edgar Gott, Chuck Anderson, Virgil Abloh

Digital Laboratory: Publisher of Internet Journal

A historical article sourced from www.thebrilliance.com, a relic of internet culture initially started by Benjamin Edgar Gott and Chuck Anderson in the 2000s, later joined by Virgil Abloh. The blog was eventually retired and now serves as an archive of the beginning of three monumental careers in the creative industries. This interview consists of the two original co-creators of THEBRILLIANCE !!! interviewing the late artist, designer, and architect, Virgil Abloh. Originally published on the website blog in 2013.

Molecular Dynamics Simulation Insights Into Rejuvenating Aged Asphalt With Waste Soybean Oil And Polymers, Ke Shi, Feng Ma, Zhen Fu, Jenny Liu, Ruimeng Song, Dongdong Yuan, Yujie Tang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study utilized molecular dynamics simulations to assess the rejuvenation of aged asphalt (AA) with waste soybean oil (WSO) and functionalized SBS polymers, focusing on: 1) constructing and validating models for virgin asphalt (VA), AA, and composite rejuvenated asphalt with WSO and polymers; 2) analyzing diffusion effects and binding abilities in these rejuvenated models; 3) evaluating interface binding and diffusion behaviors in composite rejuvenated models. The addition of functionalized SBS molecules and WSO improved the diffusion rates of various components within these models. Specifically, functionalized linear-SBS (LSBS) molecules demonstrated superior diffusion performance compared to star-SBS (SSBS) molecules. Incorporating WSO and …

Investigation Of The Cohesive Behavior Of Water-Intervened Rejuvenated Sbs-Modified Bitumen, Ke Shi, Feng Ma, Zhen Fu, Jenny Liu, Ruimeng Song, Dongdong Yuan, Yujie Tang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

When water interacts with bitumen, the diffusion and cohesion characteristics between the components of bitumen are negatively impacted. Molecular dynamics simulations were employed to construct various bitumen models, including bitumen–bitumen (without water), water-containing single bitumen, water-containing bitumen–bitumen, and bitumen–water–bitumen models. The primary research objectives were as follows: comparing the changes in the densities of bitumen models with and without water, analyzing the interlayer cohesive energies of bitumen models interacting with water, evaluating the hydrogen bonds in water-containing bitumen models, and characterizing the diffusion behaviors of bitumen components. The results indicated that when water interacted with the bitumen, it filled internal …

Simulation Of Calcium Carbonate Nucleation Processes In Confined C-S-H Nanopores With Different Calcium-Silicon Ratios, Jiao Yu, Kerui Wang, Peixuan Yang, Mengmeng Li, Biqin Dong, Zuquan Jin, Shuxian Hong, Hongyan Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Carbonation curing technology plays an important role in carbon cycling and improving the properties of cement-based materials, while the nucleation and growth mechanism of calcium carbonate (CaCO₃) is still unclear. Based on molecular dynamics simulation, the formation process and nucleation mechanism of CaCO₃ in confined C-S-H nanopores with different calcium-silicon ratios were studied. The results show that the clustering behavior of CaCO₃ in C-S-H nanopores filled with saturated CaCO₃ solution can be divided into three phases, rapid agglomeration stage, slow cluster stage, and stable cluster stage. The aggregation is mainly dependent on ionic bonding for …

Effect Of Superabsorbent Polymer On 3d Printing Characteristics As Rheology-Modified Agent, Yu Cun Gu, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study aims to investigate the effects of two superabsorbent polymer (SAP) types, S1 and S2 (with continual absorption and rapid desorption, respectively) as rheology-modified agent on 3D printing characteristics. Three base mixtures were selected with different thixotropic behaviors (i.e., mixtures with high re-flocculation (τfloc), high structuration rate (Athix), and both low τfloc and Athix, respectively). The initial mini-slump flow of 190±10 mm was secured by adjusting superplasticizer (SP) or water demand (increasing w/b by either 0.025 or 0.05). An extrudable region was determined within the range of τfloc (200-890 Pa) and Athix (15-60 Pa/min). The use of the S2 …

Coupled Effect Of Fiber Type And Reinforcement Ratio On Flexural Behavior Of Reinforced Beams Cast With Super Workable Concrete, Jingjie Wei, Le Teng, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study investigated the effect of 5-dimensional hooked-end fiber (5D) on the structural performance of beams and compared its efficiency with other fibers in strengthening structural performance of reinforced concrete (RC) beams with an increase in reinforcement ratio (ρ). The potential of using fibers to reduce the longitudinal rebar based on various design criteria was investigated. The fibers included 5D, a combination of 80 % 3-dimensional hooked-end and 20 % short steel fibers (STST), and two combinations of macro synthetic fibers A and B (MSF). Experimental results indicated that, compared to non-fibrous beams, using 5D was the most efficient in …

Campus Master Plan Update - August 2023, Facilities Management, East Tennessee State University

Campus Facility Master Plans

No abstract provided.

In Pursuit Of Eye Tracking For Visual Landscape Assessments, David Evans, Brent Chamberlain

Landscape Architecture and Environmental Planning Faculty Publications

Visual quality and impact assessments have historically relied on experts to formally evaluate the visual properties of a landscape. In contrast, environmental psychologists have studied subjective landscape preferences using ratings and surveys. These two approaches represent, respectively, the “objectivist” and “subjectivist” paradigms within visual landscape research. A gap, however, exists between these approaches: actual observation behaviors. In this paper, we argue for the inclusion of eye-tracking research in visual landscape assessments as a critical bridge between objective landscape qualities and subjective visual experiences. We describe the basics of eye-tracking methods and data types to introduce the role of eye movements …

Investigation Of Faults In Air-Conditioning Systems In Commercial Buildings: Occurrence, Diagnostic Validation, And Energy Impacts, Yuxuan Chen

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

In commercial buildings, fault detection and diagnosis (FDD) tools have been developed for detecting and diagnosing faults in building systems, which can provide useful information regarding fault locations and potential causes of faults, so that building operators and facility staff can be notified in time and quickly respond as problems arise. Nowadays, there are many commercial FDD tools available in the market, and these tools have been widely adopted in large- and medium-scale commercial buildings in the United States. Several studies have demonstrated the energy saving potential with the use of FDD in commercial HVAC systems, and one critical aspect …

Indefinability Of Effective Stress For Unsaturated Soils, Xiong Zhang, Sandra Houston

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

For decades, researchers have searched for an unsaturated soil effective stress that performs analogously to effective stress for saturated soils and provides some simplifications over net stress and suction approaches. A recent debate is whether problems identified with unsaturated soil effective stress can be resolved via elastoplastic analyses. Effective stress equations are reviewed and categorized as being based on volume change, shear strength, yield, or degree of saturation. These equations are evaluated for consistency with saturated soil effective stress expectations using the Barcelona basic model (BBM), simplified into an integrated elastoplastic framework using the modified state surface approach (MSSA). Under …

Effortless Mindfulness Toolkit: Easy Meditation Scripts To Begin Each Class., Brett Whysel

Open Educational Resources

The Effortless Mindfulness in the Classroom Toolkit is an open educational resource designed to create happier classrooms, boost student engagement, and foster a sense of community through brief, effective mindfulness exercises. This comprehensive toolkit provides educators with everything they need to seamlessly integrate mindfulness practices into their teaching routines, regardless of prior experience. The toolkit includes introductory slides, 15 ready-to-use meditation scripts, and accompanying audio recordings, covering a variety of mindfulness techniques such as focused breathing, body scans, and loving-kindness meditations. Each meditation is paired with a reflective prompt to deepen student engagement and reinforce the benefits of mindfulness. Additionally, …

Threat And Hazard Identification And Risk Assessment (Thira) Guidance For Railroads, Frances L. Edwards, Daniel C. Goodrich

Mineta Transportation Institute

Climate change creates new challenges for all critical transportation infrastructure, especially for railroads with an open system that is continuously exposed to the elements. A Threat and Hazard Identification and Risk Assessment (THIRA) is a necessary first step for an organization to understand the challenges and develop strategies for adaptation to them. In many cases, the railroad sector is uniquely positioned to mitigate greenhouse gas emissions through mitigation steps. This guide will assist railroad risk managers and emergency managers to evaluate the risks and determine how best to respond to them through preparation, mitigation, or adaptation. The THIRA is the …

Extrudability Window And Offline Test Methods To Predict Buildability Of 3d Printing Concrete, Yu Cun Gu, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This Study Investigates the Effect of Thixotropy and Stiffness Evolution on the Extrudability and Buildability of 3D Printing Concrete. Different Types of Supplementary Cementitious Materials and Limestone Filler Were Used to Prepare Mortars with Varying Levels of Thixotropy and Early-Age Stiffness. Mixtures with Yield Stress and Flocculation (Τfloc) of 180–400 and 420–950 Pa, Respectively, Exhibited Adequate Extrudability Without Plastic Collapse. the Printing Was Completed 8–15 Min after Mixing at a Vertical Build-Up Rate of 138 Mm/min. Several Process Parameters, Including Rest Time to Secure a Penetration Resistance of 150 KPa (T150) and Penetration Resistance at Various Rest Times Were Developed …

Effect Of Absorption Kinetics Of Superabsorbent Polymers On Printability And Interlayer Bond Of 3d Printing Concrete, Yu Cun Gu, Shuyi Zheng, Hongyan Ma, Wu Jian Long, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study examines the effect of the material characteristics of superabsorbent polymers (SAPs) on the printability and interlayer bond strength of 3D printing concrete. Three types of SAP, including two acrylamide-co-acrylic polymers with coarse and fine particle sizes (S1 and S2) and an acrylic copolymer (S3), were employed. The investigated mortar mixtures had a fixed initial mini-slump flow of 195 ± 10 mm and yield stress of 290 ± 25 Pa. The fluidity of SAP-incorporated mortars was maintained by either adjusting the superplasticizer dosage or increasing the water content. Test results indicate that particle flocculation is dependent on SAP absorption …

Carbon Capture And Renewable Energy Policies: Could Policy Harmonization Be A Puzzle Piece To Solve The Electricity Crisis?, Mahelet G. Fikru, Fateh Belaïd, Hongyan Ma

Economics Faculty Research & Creative Works

The electricity market crisis, driven by factors such as increased energy demand, rising fuel prices, aging infrastructure, and greenhouse gas emissions, requires a multifaceted approach including the strategic implementation of Carbon Capture and Storage (CCS) technologies, which despite high costs and potential adverse impact on renewable investments, can allow the use of fossil fuels to maintain grid stability, and simultaneously lower carbon footprint. Across the world, several nations are designing financial incentives and improving regulatory frameworks to reduce barriers to the deployment of CCS. However, it is not clearly understood whether and to what extent such policy support would affect …

Rheology Modification Of Flowable Mortar With Co2, Sean Monkman, Soo Duck Hwang, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Rheological Properties of Mortar Samples with Different Additions of CO₂ during Mixing Were Determined. Flowable Cement-Based Mortars at Three Different W/c (0.55, 0.45 and 0.35) Were Produced and the Effects of CO₂ Gas Were Examined on the Fresh Properties of Slump Flow, Yield Stress and Plastic Viscosity. According to the Experimental Results, the Mortar Yield Stress and Plastic Viscosity Increased Faster over Time Than in a Reference System with the Increasing Addition of CO₂ and Greater Effects Were Seen at the Lowest W/c of 0.35 Than at the Others. the Impact of the CO₂ on …

Development Of Multivariate-Coupled Grouting Diffusion Model For Rcc, Xiao Sun, Yao Wang, Hengrui Liu, Zhuanjia Yang, Hongyan Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Grouting Quality of Grout-Enriched Roller Compacted Concrete (RCC) is Difficult to Be Quantified Due to the Fact that the Crucial Effects, Such as Infiltration and the Compaction of the Skeleton of the RCC, Are Not Taken into Consideration. Combined with Model Testing, This Study Proposes an Improved Grouting Prediction Model Which Considers the Coupling Effect of Pore Fractal Properties, Time Variation of Grout Rheological Properties and Infiltration. Moreover, the Influence of Construction Parameters Such as Grouting Parameters, Construction Period Selection, Grouting Pipe Arrangement on the Grouting Effect Was Clarified. the Tests Indicated that the Maximum Diffusion Range of Slurry …

Increasing Drift Capacity Of Non-Ductile Concrete Shear Walls Through Confinement With Fiber-Reinforced Polymer Application, Andrew Duong, Sophia Maglabe, Sheyna Rongong, Peter Laursen, Andrew Kline, Anahid Behrouzi

Architectural Engineering

The seismic response and laboratory testing of pre-1980s reinforced concrete (RC) shear walls commonly exhibit undesirable concrete crushing and rebar buckling in the wall end-zones leading to a flexural compressive failure. The lack of ductility of these walls is attributed to low reinforcement ratios and absence of special boundary elements (SBE) as required by modern design code. Thus, the authors are proposing a fiber reinforced polymer (FRP) retrofit method to provide confinement to the end-zones of pre-1980s walls equivalent to that of an SBE.

Current industry applications of FRP have largely been for shear strengthening of RC beams, columns, and …

Form Pressure Exerted By Concrete For A Large-Scale Structure: Its Quantification And Physicochemical Interpretation, Tae Yong Shin, Seongho Han, Jin Hyun Lee, Jae Hong Kim

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Securing safety in formwork is one of the most important tasks to be carried out in the initial stage of construction. The form pressure exerted by fresh concrete needs to be identified, and it should be retained by a formwork system. A design pressure is given in literature and standards, but for large structures its precise prediction is required through a detailed analysis or a mock-up test. This study reports the lateral form pressure distribution generated by fresh concrete through a series of mock-up tests. The tests are designed considering the placement for nuclear containment structures; 3.4 m tall and …

New Method To Calculate Friction Velocity In Smooth Channel Flows Using Direct Numerical Simulation Data, Harshit Mishra, S. Karan Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this paper, we leverage the direct numerical simulation (DNS) data for closed-channel flow for a range of friction Reynolds number (Reτ∼180-5,000) to develop a new one-point friction velocity method (OPFVM) to calculate friction velocity U∗ in terms of free-surface velocity Um, flow depth h, and kinematic viscosity ν. In contrast to prevalent methods that require several cumbersome near boundary measurements to obtain friction velocity, the OPFVM relies on a single easy-to-measure free-surface velocity measurement. The formulation is used to obtain friction velocity for a closed-channel flow (CCF) DNS regime with Reτ=10,049 and on four open-channel flow (OCF) DNS regimes …

In Situ Synthesis, Characterization And Photocatalytic Efficacy Of Silver-Enhanced Mxene And Graphene Nanocomposites, Kishore Chand, M. Mustafa Azeem, Muhammad Nazim Lakhan, Mukhtiar Ahmed, Muhammad Jehanzaib Aslam, Ahmer Hussain Shah

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The emergence of 2D materials has significantly expanded the wide range of nanomaterials with diverse applications. Notably, their high conductivity, catalytic efficiency, and hydrophobicity have fueled heightened research interests for water treatment applications. This research aimed to investigate the synthesis and characterization of MXene and reduced graphene oxide (rGO) nanocomposites with silver nanoparticles (Ag) for enhanced catalytic activity in the decomposition of Direct Blue-24 dye. In this study, we employed well-established methods, previously documented in the literature, to prepare two distinct nanocomposites. Novel nanocomposites, namely reduced graphene oxide–silver nanoparticles (rGO–Ag) and MXene–silver nanoparticles (MXene–Ag), were synthesized using the hydrothermal and …

2023 Kahramanmaras Earthquake Sequence: Geospatial Visualization And Analysis Of Multiple Building Damage Datasets, Alejandra Bravo, Jerry Hue Truong Luong, Anahid Behrouzi

Architectural Engineering

To learn from past earthquake events, a critical task is validating observations with data. After a significant seismic event like the 2023 Kahramanmaras Türkiye earthquake series, various organizations perform reconnaissance efforts to collect building response data. Some reconnaissance missions focus on visiting fewer buildings and recording detailed information (high-resolution, HR), while others aim to visit as many buildings as possible recording basic information (low-resolution, LR). Both dataset types are vital for learning, and the next step is analyzing and visualizing the data to validate in-field observations. This paper has three purposes: 1) examine a HR dataset by Degenkolb with 138 …

Development Of An Undergraduate Course On Women In The Design Of The Built Environment, Anahid Behrouzi, Kira Hope Tolman, Paige Van Rossum

Architectural Engineering

The Cal Poly in San Luis Obispo (Cal Poly) Architectural Engineering (ARCE) department has seen significant progress in reaching gender equity as evidenced by recent student enrollment numbers. However, ARCE-affiliated technical and history classes still lack discussion of notable female practitioners or the value of input from women as project stakeholders. This educational shortcoming is likely true at many other civil or structural engineering, construction management, and architecture programs. To address this gap, the authors developed a new 1-credit hour course offered in Spring 2024 to Cal Poly Honors and ARCE students to expose them to the contributions and concerns …

In Situ Synthesis, Characterization And Photocatalytic Efficacy Of Silver-Enhanced Mxene And Graphene Nanocomposites, Kishore Chand, M. Mustafa Azeem, Muhammad Nazim Lakhan, Mukhtiar Ahmed, Muhammad Jehanzaib Aslam, Ahmer Hussain Shah

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The emergence of 2D materials has significantly expanded the wide range of nanomaterials with diverse applications. Notably, their high conductivity, catalytic efficiency, and hydrophobicity have fueled heightened research interests for water treatment applications. This research aimed to investigate the synthesis and characterization of MXene and reduced graphene oxide (rGO) nanocomposites with silver nanoparticles (Ag) for enhanced catalytic activity in the decomposition of Direct Blue-24 dye. In this study, we employed well-established methods, previously documented in the literature, to prepare two distinct nanocomposites. Novel nanocomposites, namely reduced graphene oxide–silver nanoparticles (rGO–Ag) and MXene–silver nanoparticles (MXene–Ag), were synthesized using the hydrothermal and …

Freezing-Thawing Hysteretic Behavior Of Soils, Jidong Teng, Antai Dong, Sheng Zhang, Xiong Zhang, Daichao Sheng

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The soil freezing characteristic curve (SFCC) plays a crucial role in investigating the soil freezing-thawing process. Due to the challenges associated with measuring the SFCC, there is a shortage of high-quality or rigorous test results with sufficient metadata to be effectively used for applications. Current researchers typically conduct freezing tests to measure the SFCC and assume a singular SFCC when studying the freezing-thawing process of soils, although limited studies indicated that there is a hysteresis during the freezing and thawing process. In this paper, a series of freezing-thawing tests were performed to assess the SFCC, utilizing a precise nuclear magnetic …

Synergetic Effect Of Viscosity Modifying Admixtures And Polycarboxylate Ether Superplasticizer On Key Characteristics Of Thixotropic Uhpc For Bonded Bridge Deck Overlay Rehabilitation, Le Teng, Ming Jin, Jiadi Du, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Thin bonded ultra-high-performance concrete (UHPC) overlay is an advanced technology for bridge deck rehabilitation. UHPC should be tailored to secure adequate flowability and high thixotropy to facilitate mixing and placement with a low risk of sagging of the material on sloped bridge deck surfaces. The synergetic effect between nano clay (NC) and polycarboxylate ether (PCE) superplasticizer or cellulose-based viscosity modifying admixture (VMA) and PCE on the rheological properties (yield stress, plastic viscosity, and thixotropy), cement hydration, autogenous shrinkage, compressive strength, and porosity was systematically investigated. The bond strength between conventional concrete (CC) representing existing bridge deck concrete and thixotropic UHPC …