Architecture Commons^™

Sustainability And Circular Economy Horizon Scan And Needs Analysis, Sadaf Dalirazar, Mark Kelly, Derek Sinnott, James O'Donnell

Reports

The construction industry plays a crucial role in addressing the climate crisis as it is the largest global consumer of raw materials and contributes significantly to global energy consumption and emissions. Considering the world’s continuous population growth and the imperative to address infrastructure and housing demands the construction sector needs to adopt further sustainable strategies in its activities to reduce the pressure on natural resources. In addition, the Architecture, Engineering, and Construction (AEC) sector is responsible for generating substantial amount of waste known as Construction and Demolition Waste (CDW), which is projected to increase due to the future construction developments. …

Information Management And Bim Standards And Supports Inventory, Ryan Dempsey, Barry Mcauley, David Burke

Tools

The Digital Standards pillar consists of industry experts who champion the benefits of common rules, guidelines, and workflows that facilitate the improvement of information flow and information management across asset life cycles. Digital standards provide a common language that can be translated to technical specifications enabling clients, designers, contractors, and facilities managers, irrespective of their preferred tools, to communicate efficiently and reduce cost, rework, and disputes. Working closely with the Digital Procurement and Digital Education and Training pillars, this pillar is developing and delivering Irish Information Management/BIM (Digital Construction) guidelines for the sector.

This report summarises existing digital construction standards, …

Building Services Engineering September/October 2023

Building Services Engineering

No abstract provided.

Building Services Engineering November/December 2023

Building Services Engineering

No abstract provided.

Using Bim Technologies To Calculate And Visualise The Global Warming Potential Of Building Materials, Ryan Dempsey, Malachy Mathews Dr.

Conference Papers

The built environment has a significant potential to reduce carbon emissions and raw material consumption. Digitisation processes such as Building Information Modelling (BIM) and Life Cycle Assessment (LCA) can offer solutions to improve sustainability throughout the building’s life cycle for the decarbonisation of the industry. In Ireland, the Royal Institute of Architects Ireland (RIAI) launched the 2030 Climate Challenge in response to the climate emergency. This sets out a list of targets to meet before 2030 for carbon emissions within the built environment. This research aims to investigate if the application of BIM tools can be leveraged to automate Global …

Accelerating Bim Adoption In Ireland: A Ten-Year Review Of Cita Bim Gathering Proceedings, Alan Hore, Roger West, Barry Mcauley

Conference Papers

Digital construction interfaces have been studied extensively over the last few decades, with an ever-grow- ing catalogue of publications. The CitA BIM Gathering conferences have played a key role in bringing together the research and industry communities ina collaborative setting over the past decade in Ireland. In this paper the authors systematically review 10 years of papers published in the BIM Gathering pro- ceedings since the inaugural conference in 2013. A total of 175 papers involving over 200 authors have been reviewed and classified under the 2018 World Economic Forum (WEF) recommendations in respect to ac- celerating BIM adoption. The …

An Investigation Into Ireland’S Bim Skills Gap, Guadalupe Centanni, Barry Mcauley

Conference Papers

The adoption of digital skills within the Irish AEC Sector has the potential to enhance efficiency and competitiveness among its stakeholders. Despite this opportunity, there is still a high demand for skilled BIM professionals, which cannot be currently met. To meet this skills demand and directly target future skills gaps within Ireland, several challenges must be addressed to facilitate broader BIM adoption. This paper focuses on addressing this gap by identifying steps to be followed to develop skilled professionals within BIM. This has been achieved by investigating the extent to which construction stakeholders in Ireland comprehend BIM and, examiningthe training …

Industry Colloquium Report, Robert Moore

Reports

In the ever-evolving landscape of the construction industry, digital transformation has emerged as a pivotal force reshaping the way projects are conceived, executed, and delivered. This transformation, fuelled by cutting-edge technology and innovative practices, holds the promise of greater efficiency, sustainability, and collaboration within the construction sector.

This report offers a comprehensive summary of the Build Digital Project colloquium. It provides actionable insights and recommendations for clients, supply chain partners, and for prioritisation within the Build Digital Project pillars. As the industry partners seek to build a more efficient, sustainable, and collaborative construction sector, understanding and harnessing the invaluable insights …

Skills Matter – Up-Skilling Across Construction Stakeholders For Emerging Roles, Avril Behan, Paul Mccormack, Barry Mcauley

Conference Papers

The EU’s Climate Target Plan To 2030 (European Union 2020b) of achieving at least 55% reduction in Green House Gas emissions from 1990 levels, delivering towards a climate-neutral economy by 2050, requires systems-level change in the way we design, construct, and operate our built assets. Funding initiatives, such as co-ordinated by BUILD UP Skills, aim to deliver upskilling to the market but targets set by the European Skills Agenda may not be reached at current achievement levels. This paper presents the results of one completed and the progress of one ongoing Horizon 2020 funded project, BIMcert and ARISE, respectively. Learning …

Building Services Engineering July/August 2023

Building Services Engineering

No abstract provided.

Digital Education And Training Inventory, Ken Thomas, Robin Stubbs, Emily Shakespeare, Theresa Marie Greiwe

Tools

As the construction industry continues to evolve and increasingly embraces digitisation, an early-stage deliverable for Build Digital Project was to conduct a horizon scan of the opportunities available for those within the construction sector. A primary aim, therefore, is to provide a comprehensive inventory of educational and training provisions that exist within Ireland at present.

The resulting searchable inventory focuses on key educational sectors including Universities, Educational Training Boards (ETBS), Colleges of Further Education, Professional bodies and similar organisations.

Supporting The Delivery Of Information Management And Bim In Ireland: Learnings From Selected International Regions, Alan Hore, Ciaran Mcnally, Adekunle Qudus Adeleke, Wahib Saif

Reports

The Executive Summary introduction the report recommendations for Build Digital with respect to information management and the use of BIM as a critical vehicle of innovation to unlock improved project outcomes in construction.

Addressing Low Heat Pump Heating System Sales In The Uk, Ben Costelloe

Articles

The replacement of existing fossil fuel boilers with heat pumps is seen as a key measure in the decarbonisation of heating systems and addressing climate change. This policy however, is currently failing in many Western European states, particularly in the UK. The many reasons for this situation are examined. However, the age of UK housing stock and particularly the high number of dwellings built prior to the introduction of building insulation regulations in 1980, are key. To maintain the running cost of air source heat pumps competitive with those of the gas boilers they generally replace the heat pump lift …

Using Bim To Increase The Efficiency Of Energy-Driven Retrofitting Projects, Anne Grego, Shannon Chance, Barry Mcauley

Conference Papers

The building sector is responsible for nearly 40% of global energy consumption. Many existing buildings have poor thermal insulation and low energy performance, hindering sustainability goals. Energy-driven building retrofitting could address this issue and implementing Building Information Modelling (BIM) in retrofitting can reduce process time, costs, and waste associated with such undertakings. Yet, there is a lack of research and insufficient guidance for implementing BIM in energy-driven retrofitting. A BIM framework is presented to enhance decision-making processes during retrofitting. The aims of this study were to (1) identify BIM technologies and methodologies that could address existing barriers and improve efficiency …

Building Services Engineering May/June 2023

Building Services Engineering

No abstract provided.

Close Mapping Of St. Olav’S Pilgrimage Path Through Gudbrandsdal Norway: Probabilities Of A Designed, Land Surveyed Concept Of A Large-Scale Christianised Landscape, Dennis Doxtater

International Journal of Religious Tourism and Pilgrimage

This exercise in Norway ‘close-maps’ accurate, existing geometries between thirty-two latitude / longitude points of mostly medieval churches and other sites on the major pilgrimage path through Gudbrandsdal to Trondheimsfjord where the martyr St.Olav was venerated. Site data and basic path routes are taken from the Pilegrimsleden website, popular today with religious or recreational tourists. The inclusion of the largest prehistoric monumental mound in Scandinavia as an important early stop on the pilgrimage provides the first clue to the eventual mapping of a large-scale ‘system’ of land surveyed patterns. This symbolic anchor in the south, is connected to likely ancient …

Building Services Engineering March/April 2023

Building Services Engineering

No abstract provided.

Employment, Remuneration And Workplace Report 2023, Roisin Murphy Dr

Reports

This report follows the previously published “Employment Opportunities and Future Skills Requirements for Surveying Professionals, 2018-2021” in which a significant shortage of property, land and construction professionals was projected. The current research has been undertaken against a backdrop of economic uncertainty due largely to Brexit, Covid-19 and the war in Ukraine.

The Irish economy rebounded well following the Covid-19 pandemic with low unemployment, moderate economic growth and solid Exchequer balances forecast in the medium term. On the downside, price inflation, fueled by soaring energy costs, have resulted in interest rates rising for the first time in over a decade which …

Dlr Covid-19 Mobility Review (Phase 2a): Report On Cmr Economic Development & Business Community Feedback, Sarah Rock Dr., Robert Bradshaw Dr., David O'Connor, Odran Reid

Reports

This research reports on the findings from an area focused economic development and business community focused study of the Costal Mobility Route (CMR), which is intended to complement and extend research previously conducted in Phase 1 of Dún Laoghaire-Rathdown County Council’s (DLR’s) ‘Covid-19 Mobility & Public Realm Works’ project. This study is based on participant interviews, and is limited to businesses located directly along the CMR, as well as a number of business groups representing a wider area and a Local Enterprise Office.

While one company reported a significant decline in revenue that they attribute to the CMR, the remainder …

How Can Visual Programing Be Used To Aid The Development Of A Structural Scheme Design Process Utilising Geometric Data Within An Architectural Revit Model?, Ed Carthy, Kieran Lakhera O'Shea

Reports

The early-stage structural scheme design of a building is a complex task requiring the collection of multiple information categories such as geometry, loading and materials. The collection and review of this information is traditionally conducted in a 2D environment. This is inefficient, time-consuming, and tedious. This paper provides a review of how structural engineers’ understanding and implementation of BIM has evolved significantly in recent years, validated by extant literature in areas such as BIM automation, visual programming, and structural optimisation in the structural engineering sector. Structural engineers are growing more aware that BIM provides a vast repository of data to …

The Relationship Between Ventilation Rates In Schools And The Indoor Airborne Transmission Potential Of Covid-19, Seamus Harrington, Mark Mulville, Spyros Stravoravdis

Articles

The requirement for natural ventilation strategies in classrooms to perform in respect to both their inherent and adaptive capacity is necessary to mitigate the risk of transmission associated with infectious airborne pathogens such as COVID-19. This paper assesses the performance of ten classrooms considering (a) the designed versus actual ventilation capacity; (b) the probability of airborne disease transmission by unit time resulting from calculated ventilation rates and (c) the reduction of transmission risk associated with mask wearing by all occupants.

Monitored air changes per hour (ACH) range from 0.26–1.7, demonstrating that none of the classrooms meet designed ventilation rate whilst …

Building Services Engineering January/February 2023

Building Services Engineering

No abstract provided.

The Suitability Of Demand-Controlled Sensor Based Ventilation Systems In Retrofit Dwellings - A Longitudinal Study., Seamus Harrington, Mark Mulville

Conference papers

A fabric-first approach to dwelling retrofit results in increased airtightness, therefore there is an obligation to ensure that the upgrades do not lead to poor indoor air quality (IAQ) resulting from inadequate ventilation. The sensor-based demand-controlled ventilation (SBDCV) under review seeks to provide fresh air for breathing and to dilute and exhaust pollutants and odours. This system modulates the ventilation rate over time based on relative humidity levels and/or presence detection and considers that the level of ventilation provided is sufficient to control the concentration of all other indoor air pollutants, including those that are not a result of human …

A Stereotomic Struggle, Jim Roche

Articles

Stone in architecture has “territorial and political implications” as its use and designation impact the human rights of the indigenous population. The craft of stereotomy is not just bequeathed from the Crusaders or more recent imperial colonists but has a diverse blended history that is deeply ingrained in Palestinian built culture. Such theses inform the experimental work of Elial and Yusef Anastas, two brother architects who operate from Bethlehem what they term a counter hegemonic practice with the stated aim of “decolonising architecture”.

What Impact Is Occupancy Behavior Having On The Energy Performance Gap Of A Cohort Of A Rated Dwellings?, Karl Mcgarry

Other resources

The use of energy asset ratings in the construction industry has been criticized in literature and in practice due to its apparent inaccuracies when compared to measured energy usage. In the Irish context the Dwelling Energy Assessment Procedure (DEAP), the asset rating tool has been the topic of many research papers of late with authors citing that in almost all cases the model is underestimating the energy usage of A rated dwellings. This point is of major concern due to A rated Building Energy Rating (BER) certificates now being minimum compliance with the building regulations for new build dwellings. The …

The Resilience Of Proximity Tourism During The Pandemic: Local Walking Tours Of Budapest, János Klaniczay

International Journal of Tour Guiding and Visitor Attraction Research

Global tourism was hit hard by the Covid-19 pandemic, but an exception can be seen among walking tour companies providing tours for locals in Budapest, who saw a rise in demand for their tours during the summer and early autumn of 2020. During pre-pandemic times tourism levels broke records annually, and one of the main concerns was overtourism in certain cities, but due to COVID-19, international arrivals hit record-lows and millions of jobs became endangered. Meanwhile data show that local alternative walking tours in Budapest could operate sustainably during the pandemic at almost the same capacity as before, because local …

Building Services Engineering November/December 2022

Building Services Engineering

No abstract provided.

Building Services Engineering September/October 2022

Building Services Engineering

No abstract provided.

Critical Evaluation Of Time And Cost Of Terrestrial Laser Scanning For Construction Automated Qa Analysis, Joao Rocha, Davitt Lamon

Capstone Reports

Many governments agencies and private owners are demanding up-to-date information related to the current conditions of their facilities. Conventional QA is time-consuming and inefficient; thus, 3D terrestrial laser scanning (TLS) technology has been adopted due to the fast speed and high accuracy in acquiring data. Automated QA analysis can reduce the labour and time needed, reduce the costs, and improve the overall project efficiency. However, very few research efforts have been made to study the benefits of the automated QA analysis in a quantitative way. The process of the TLS-based geometric QA based in an automated data analysis process is …

Building Services Engineering July/August 2022

Building Services Engineering

No abstract provided.