Architecture Commons^™

Structural Analysis Of Overhead Crane In Simpson Strong-Tie Laboratory, Amy Poehlitz

Architectural Engineering

No abstract provided.

Mano De La Amistad: A Thin Shell Concrete Structure Designed For The People Of Havana, Cuba, Peter Aster, Marta Blachowicz-Scott, Aaron Cook, Alex Erler, Elizabeth Townsend, Ger Yang

Architectural Engineering

In designing a thin shell structure to cover the performance space on Tribuna Anti Imperialista Jose Marti, in Havana, Cuba, we developed a heavily symbolic concept and further abstracted it to reach our design. Basing the concept on the quote to the right by Obama about US and Cuba relations, we wanted our design to be representative of a hand that works to adjoin the plaza to the US Embassy which is directly west of the site. The “wrist” portion adds an asymmetric element, while the fingers provide a backdrop to the performers as well as a view through to …

Mt. Carmel Shade Structure, Sonny Moraga, Adam Maclean, Julian Reyes, Christopher Carter

Architectural Engineering

The Mt. Carmel Shade Structure incorporated the efforts of students practicing Architectural Engineering and Construction Management disciplines. The project consisted of designing, engineering and constructing a steel frame structure for the benefit of Mt. Carmel Church and its associated preschool.

Masonry Core Testing, Enrico Aldo Alvaro, Onessa Wyleen Fernandez Anastasio

Architectural Engineering

No abstract provided.

The Ginkgo Shell, Mark Luzi, Karla Santos, Josh Cannon, Erika Davis, Nora Villanueva

Architectural Engineering

The overall concept for this outdoor concrete shell structure, located in Furstliche Park in Inzigkofen, Germany, is derived from an abstracted ginkgo leaf. Drawing on inspiration from a poem about the two parts of the ginkgo leaf becoming one, we took the approach of combining both the natural and built environment into one cohesive piece. To connect the two, it was imperative that we place the shell on the site as to have the smallest impact. With a small portion of the overall site used, the unoccupied space further enhances the natural environment. Creating a literal design connection between the …

Structural Calculations For Community Center And Stage, Mission Twentyfive35 Dominican Republic, Jocelyn Lu, Mindy Trieu

Architectural Engineering

No abstract provided.

Shrinkage Cracking In Concrete Tilt-Up Construction, Stewart Hooks, Jack Robinson

Architectural Engineering

The purpose of this project is to investigate a particular, undesirable cracking pattern in concrete tilt-up panels that, until now, did not have a known definite cause. The cause of this cracking pattern is hypothesized to be due to shrinkage restraint of the concrete panels. The cracking under investigation occurs at the bottom corners of the Tilt-Up panels, suggesting that the base of the panel is restrained from shrinkage. This project models various components of Tilt-Up Construction that have potential for restraining the panels from shrinking. This project consists of the following main components.

The first aspect of this project …

Mt Carmel Shade Structure, Julian Reyes, Sonny Moraga, Adam Maclean, Christopher Carter

Architectural Engineering

A team of for students designed and constructed a shade structure for a local church and day care center. The group was responsible for developing a design which addressed the needs of the congregation as well as the needs of the toddler day care center. The team developed a steel framed scheme with a panelized metal roof which provided a long lasting solution and minimal maintenance costs.

"Rusty" The Mustang, Jack L. Tenley, Ryan Llamas

Architectural Engineering

No abstract provided.

Implementing Net Zero Energy Into The Construction Innovations Center, Marlo Arleen Castro

Construction Management

As the environmental status of our planet declines, it is becoming more and more important for the construction industry to adapt. Leadership in Energy and Environmental Design (LEED) is becoming an unspoken requirement for all new and tenant improvement construction, and now, with the goal of Net Zero Energy (NZE) for all new commercial buildings by 2030, NZE is becoming the way of the future. As of late, California Polytechnic State University in San Luis Obispo (Cal Poly) has made grand efforts to retrofit several of the older buildings on its campus in order to achieve LEED certification. One of …

Modular House Revival, Kevin Chiang, Spencer Dilley, Sarah Dowthwaite, Trevor Houghton, Ryan Lefebvre, Michele Leung, Cameron Lober, Chris Martinez, Katie Mayer

Architectural Engineering

The Modular House, located in Poly Canyon, has seen extensive damage since the last caretaker left nearly ten years ago. To prevent further damage and improve the safety and appeal of the structure, we are proposing a renovation of the existing building that removes the existing cladding and partitions. By the end of Spring Quarter 2017, the Modular House will have a guardrail system replacing the wood paneling on the walls and a new steel composite deck to replace the current flooring system. The structural steel framing system will remain as is.

The Atascadero Printery, Kaylee Efstathiu, Jami Hahn, Tyler Pizarro, Elizabeth Townsend, Mark Luzi

Architectural Engineering

No abstract provided.

Experimental And Numerical Investigation Of Flexural Concrete Wall Design Details, Anahid A. Behrouzi, T. Welt, Dawn Lehman, Laura Lowes, J. Lafave, Daniel Kuchma

Architectural Engineering

Reinforced concrete structural walls are common in mid- to high-rise structures in high seismic regions, and are expected to have good strength and ductility characteristics if designed in accordance with ACI 318-14. However, experimental and analytical investigations of reinforced concrete structural walls and isolated boundary element prisms indicate that the existing design provisions may be insufficient to provide ductile, flexure-dominated response under cyclic loading. Walls designed with an ACI compliant boundary element length are susceptible to shear-compression failures below the maximum ACI allowable shear stress of 10Acv√fc’. Also of concern is the frequent use of thinner walls in modern design; …

Herbert Hoover Elementary / Charleston Complete Corridor Plan, William Riggs, Kristan Anaya, Troy Andres, Ryanne Browers, Dan Canella, Jesse Carpentier, Dylan Coleman, Seitu Coleman, Melanie Conti, Rob Etter, Kyle Finger, Matthew Fluhmann, Daniel Harrison, Alyssa Lucero, Eric Martinez, Ian Mccarville, Caitlin Milich, Megan Miller, Sammi Mulhern, Benjamin Rady, Erina Shimanuki, Noah Stricker, Bryan Wheeler, Torina Wilson, Justin Wong, Crp 425 Bicycle And Pedestrian Planning

City and Regional Planning Studios and Projects

Completed as a part of CRP 425 bicycle and pedestrian planning, led by Dr. William Riggs, this planning project assessed the Herbert Hoover Elementary site and Charleston corridor in the City of Palo Alto with an aim to bring a complete streets strategy to the area. The plans recommend improved accessibility for bicycles and pedestrians along Charleston Road including modal separation between bicyclists and pedestians, improved vehicular flows to mitigate vehicular traffic congestion during peak hours and increased innovation in safety features to prevent pedestrian-vehicle conflicts.

The Discursive Construction Of Learning Opportunities, Thomas Fowler, Iv, Ethny Stewart

Architecture

Researchers entering new learning environments or disciplines, ones outside their own disciplines, are often required to follow the roots and routes of observed processes to gain anemic (insider) understanding of the work of local actors, artifacts, and language-in-use.Through exploration of everyday patterns of participants, ethnographers begin to uncover what actors are required to know, understand, and construct to engage socially, professionally, and academically (Heath, 1982). For this poster, I present subset of analyses used in gaining an emic understanding of critique practices and processes in a 24/7 access third year undergraduate architecture studio at public regional university site in California.

The Impact Of Walkability On Home Values: Findings From Neighborhoods In Three Bay Area Citites, Jonathan Turner

City and Regional Planning

No abstract provided.

Technology And Urban Planning: Conditions, Market, And Guidelines, Carter Sandzimier

City and Regional Planning

No abstract provided.

Lateral Strength And Ductile Behavior Of A Mortise-Tenon Connected Timber Frame, Alexandros Kouromenos

Master's Theses

The primary goals of this project were to examine the amount of lateral force resisted by a single-bay mortise-tenon connected timber moment frame, and to introduce ductile behavior into the mortise-tenon connections by adding a steel sleeve around a traditional wood peg. This research aimed to provide proof that traditional timber frames are capable of ductile racking while reliably complying with ASCE 7-10 building code drift speci! cations, implying an increase in the ASCE 7-10 ductility factor (R) for wood frames when used as lateral force resisting elements. A secondary goal was to promote traditional heavy timber framing as a …

First Street Corridor Plan And Development Code-- Gilroy, Ca, Michael Gibbons

City and Regional Planning

No abstract provided.

Spacial Injustice In Education, Nima Kabirinassab

City and Regional Planning

No abstract provided.

The Impact Of Walkability On Home Values: Findings From Neighborhoods In Three Bay Area Cities, Jonathan Turner

City and Regional Planning

No abstract provided.

Japanese Zoning And Its Applicability In American Cities, Anthony C. Petrillo Jr

City and Regional Planning

No abstract provided.

Katella Avenue Corridor Study And Design Guidelines, Priit Kaskla

City and Regional Planning

The purpose of this document is to create design guidelines for the city of Anaheim. Katella Avenue is a major thoroughfare in the city, connecting multiple key destinations. The design guidelines will aim to create a comprehensive identity for a section of Katella Avenue. The scope of the project incorporates two major areas in the city: Anaheim Resort, and Platinum Triangle. With the corridor running through the middle of these areas, the design guideline document will link the two together. Currently, there are three specific plans, and one master land use plan giving guidance for development in the project area. …

Romberg Tiburon Center (Rtc) Water Tank Alteration Proposals 2017, Thomas Fowler, Iv

Architecture

No abstract provided.

Portfolio [Mother's Bridge], Sara Lack, Melvin Fuentes, Damon Williams, Emma Barraza

Architectural Engineering

No abstract provided.

Polaris, Dennise M. Manalo, Andy Do, Emilio Lozano, Mackenzie Stickney

Architectural Engineering

The project explores the relationship between the architecture and the engineering behind thin-shelled concrete structures. Initially, hanging chain models were used to observe pure compression; then, this model was improved upon using software like Rhinocerus, AutoCAD. From AutoCAD, the model was imported into SAP2000 for analysis.

Clothedral, Jacob T. Holmes, Andres Munoz, Sam Tenreiro Theis, Marta Blachowicz

Architectural Engineering

No abstract provided.

Colima Road Design Guidelines, Community Of Rowland Heights, Eric Poon

City and Regional Planning

No abstract provided.

Evaluation Of Out-Of-Plane Wall Anchorage Force Provisions In Buildings With Rigid Walls And Flexible Roof Diaphragms, Maria Koliou, John W. Lawson, Andre Filiatrault, Dominic J. Kelly

Architectural Engineering

Heavy concrete and masonry walled buildings with lightweight steel or wood flexible roof diaphragms are a common type of construction in North America. Failures of the out-of-plane wall anchorage to these roof systems and the resulting partial roof collapses during past earthquakes have led to repeated revisions to the seismic design provisions in the U.S. model building codes. However, the force levels considered in the current design provisions have remained largely unchanged since their introduction in the 1997 Uniform Building Code, and these provisions have not been fully tested by strong ground motions in the field. Using a two dimensional …

Roof Diaphragm Distributed Yielding Concept For Improved Seismic Collapse Performance Of Buildings With Rigid Walls/Flexible Roof Diaphragms, Maria Koliou, Andre Filiatrault, D.J. Kelly, John W. Lawson

Architectural Engineering

Buildings with rigid walls and flexible roof diaphragms (RWFD) are a common type of single-story construction in North America, Europe and New Zealand that incorporate rigid in-plane concrete or masonry walls and flexible in-plane wood or steel roof diaphragms. RWFD buildings have shown poor seismic performance during past earthquake events. In particular, it has been observed that the global seismic response is dominated by the response of the roof diaphragm, which is mainly attributed to large in-plane roof displacements that significantly exceed the displacements of in-plane walls. The present study explores the concept of distributed yielding in the flexible roof …