Architecture Commons^™

Performance Assessment Of Bioasphalt Mixtures Containing Guayule Resin As An Innovative Biobased Asphalt Alternative, Ahmed Hemida, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Guayule resin was investigated through mixture to assess its role in the field performance. For performance comparisons, conventional asphalt, neat guayule, asphalt-rubber-guayule, and guayule-rubber binders were implied. Field-simulated lab mixtures were made to investigate the major distresses. Modified Lottman, rut, semicircular bending, and disk-shaped compact tension tests were used to assess stripping, rutting, fatigue, and thermal cracking resistances. Stripping and rutting susceptibilities were also assessed by Hamburg wheel-tracking test. The outcomes disclosed that when the modified Lottman test was used, guayule containing a 7% air content was more susceptible to stripping than that containing a 3.5% air content, resulting in …

Investigation Of Corrosion Mechanism Of Ribbed Mild Steel Bars Coated With Magnesium Potassium Phosphate Cement Paste, Fan Zhang, John J. Myers, Wenyu Liao, Cun Hui, Hongyan Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This Study Investigated the Anti-Corrosion Performance of Magnesium Potassium Phosphate Cement (MKPC) Paste Applied to the Surface of Ribbed Mild Steel Bars – Which Was Exposed to Simulated Accelerated Corrosive Environment. Four Electrochemical Approaches Were Used Including Open-Circuit Potential (OCP), Electrochemical Impedance Spectroscope (EIS), Polarization Resistance (PR) and Potentiodynamic Polarization (PDP) over a Period of 5376 H (224 Days). Moreover, Visual Inspection, Optical Microscope, and Scanning Electron Microscopy (SEM) with Energy Dispersive Spectroscopy (EDS) Were Used to Assess the Extent of Corrosion on the Samples. to Understand the Mechanism of Corrosion Protection of the Coating System, X-Ray Photoelectron Spectroscopy (XPS) …

Raveling Performance Of Conventional And Rubberized Chip Seal Under Field And Laboratory Traffic Loading, Alireza Pourhassan, Ahmed A. Gheni, Mohamed Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Raveling, or the Loss of Surface Aggregate, is a Major Concern in Chip Seal Pavement. Previous Studies Have Used the Standard Sweep, Vialit, and Pennsylvania Tests to Evaluate Raveling, But These Tests Do Not Replicate the Stresses of Rolling Vehicle Tires on Chip Seal and Have Produced Inconsistent Results. Additionally, These Tests Mainly Evaluate Early-Stage Raveling Due to their Short Curing Time. in This Study, a Small-Wheel Traffic Simulation Device (SWTS) Was Used to Apply Similar Stresses as Rolling Vehicle Tires and Produce Comparable Raveling Results. This Was Confirmed through a 13-Month Field Observation of Chip Seal, Where the Laboratory …

Photolysis Of 3-Nitro-1,2,4-Triazol-5-One: Mechanisms And Products, Hunter W. Schroer, Esteban Londono, Xueshu Li, Hans Joachim Lehmler, William Arnold, Craig L. Just

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Insensitive munitions formulations that include 3-nitro-1,2,4-triazol-5-one (NTO) are replacing traditional explosive compounds. While these new formulations have superior safety characteristics, the compounds have greater environmental mobility, raising concern over potential contamination and cleanup of training and manufacturing facilities. Here, we examine the mechanisms and products of NTO photolysis in simulated sunlight to further inform NTO degradation in sunlit surface waters. We demonstrate that NTO produces singlet oxygen, and that dissolved oxygen increases the NTO photolysis rate in deionized water. The rate of NTO photolysis is independent of concentration and decreases slightly in the presence of Suwannee River Natural Organic Matter. …

Hyperspectral Reflectance For Determination Of Steel Rebar Corrosion And Cl− Concentration, Pengfei Ma, Liang Fan, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In This Study, a New Method is Proposed to Determine Chloride Ion (Cl−) Concentration and Steel Rebar Corrosion from Hyperspectral Spectroscopy. Three Groups of Mortar Cubes with Water-To-Cement (W/c) Ratios of 0.5, 0.6, and 0.7 Were Subjected to Rapid Corrosion Testing in 3.5 Wt% NaCl Solution to Accelerate the Transport of Chloride Ions. Embedded Along the Centerline of Each Mortar Cube Was a Steel Rebar that Corroded When the Cl− Accumulation Around It Exceeded a Critical/threshold Concentration. Open Circuit Potential Was Measured to Characterize the Corrosion Possibility of Steel Rebar. Mortar Surfaces Were Scanned with a Hyperspectral Camera in the …

Future Of Augmented And Virtual Reality In Construction, Cameron Ghoddoucy

Construction Management

A series of virtual design contractors were interviewed regarding the future involvement of augmented and virtual reality software integration with construction processes. Within the construction industry, VDC specialists rely on Building Information Modeling (BIM) and Computer Aided Design (CAD) to create digital models that can be used to analyze the design of a building from all points of view. The interviewees responded to questions about software implementation advantages, and related user experiences. Six interviews were conducted, amongst three industry leading companies. Their assumptions of future AR and VR usage in construction were based on learned knowledge and prior field exploration. …

Construction Of High-Bay Lab Reaction Frame Foundations, David R. Bowen, Henry E. Miller, Blaize Twisselman

Construction Management

This paper details the construction process of two concrete modular foundations designed to meet specific design standards for various testing methods. The project, positioned within the California Polytechnic State University, San Luis Obispo (Cal Poly) High Bay Lab, will provide the Architectural Engineering (ARCE) and Construction Management (CM) departments with valuable insight into industry structural elements. The project required extensive forethought and thoroughness due to the complex designs, including 200 all-thread coupler attachments and a cumbersome rebar cage. This paper outlines the primary phases of construction, including material procurement and quality control, and discusses how the final product was obtained. …

Skip The Grid: Providing Power And Light To The Navajo Nation, Esai Contreras

Construction Management

Skip the Grid was created as an initiative to power communities that are in need. This project was made possible through a collaborative effort from California Polytechnic State University San Luis Obispo (Cal Poly) students, industry partners SOLV Energy and Goal Zero, and facilitated through the educational non-profit organization Heart of America (HOA). The goal of this project was to help families of school age children in the Navajo Nation by providing solar energy systems including a battery and lighting. We hoped to achieve a long-lasting effect on the families by installing necessities for families with school-aged children. For the …

Building Artificial Reefs From Recycled Construction Materials: A Feasibility Study, Nicholas H. Lew

Construction Management

Naturally occurring reefs are some of the world’s most biologically diverse ecosystems formed by jagged rocks tucked slightly below sea level. In recent years global warming began to pose a major threat to many reef habitats. Most relevant is the increase in surface seawater temperatures that cause coral to bleach, taking away major food sources for larger marine species. Researchers have combated this by deploying artificial reefs in substitution for naturally formed limestone rock formations in order to promote the expansion of coastal habitats. This project specifically aims to utilize construction waste towards the production of artificial reefs, effectively upcycling …

Enhancement Of Heat-Cured Cement Paste With Tannic Acid, Jinrui Zhang, Ziye Kang, Youzhi Yang, Biqin Dong, Hongyan Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Improvement of Cement-Based Materials' Performance by Natural Organic Compounds Can Greatly Promote the Green and Sustainable Development of the Construction Industry. However, Such Compounds Are Not Widely Used Yet Because of their Retarding Effect on Cement. in This Study, the Retardation Effect of Tannic Acid (TA, a Well-Known Retarding Compound) is overcome and the Enhancing Effect is Achieved by Adding Less Than 0.1% Content and Curing Samples in Thermal Regime. Then the Mechanism of TA Enhancing Heat-Cured Cement Pastes is Studied Systematically. Mechanical Properties Results Suggest that Addition of 0.025% TA Can Reduce the Compressive and Flexural Strengths of …

Integrating Quality Assurance In Balance Mix Designs For Durable Asphalt Mixtures: State-Of-The-Art Literature Review, Yizhuang David Wang, Jun Liu, Jenny Liu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Delivering durable asphalt concrete within a reasonable cost is one of the great ambitions of pavement material engineers. This state-of-the-art review article documents the efforts spent in the past two decades to ensure the durability and performance of asphalt mixtures in mix design and production. A perspective with the attempt to integrate laboratory mix design, plant production quality assurance, and field place acceptance is applied in the review. The development of the performance specification and performance mix design is summarized. The paper categorizes performance specification into index-based performance specification and predictive performance specification that include performance-related specification and performance-based specification. …

Wind Effects On Dome Structures And Evaluation Of Cfd Simulations Through Wind Tunnel Testing, Tiantian Li, Hongya Qu, Yi Zhao, Ryan Honerkamp, Guirong Grace Yan, Arindam Chowdhury, Ioannis Zisis

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In the Study, a Series of Wind Tunnel Tests Were Conducted to Investigate Wind Effects Acting on Dome Structures (1/60 Scale) Induced by Straight-Line Winds at a Reynolds Number in the Order of 106. Computational Fluid Dynamics (CFD) Simulations Were Performed as Well, Including a Large Eddy Simulation (LES) and Reynolds-Averaged Navier–Stokes (RANS) Simulation, and their Performances Were Validated by a Comparison with the Wind Tunnel Testing Data. It is Concluded that Wind Loads Generally Increase with Upstream Wind Velocities, and They Are Reduced over Suburban Terrain Due to Ground Friction. the Maximum Positive Pressure Normally Occurs Near the Base …

Synergistic Effect Of Hedp.4na And Different Induced Pouring Angles On Mechanical Properties Of Fiber-Reinforced Alkali-Activated Slag Composites, Jingjie Wei, Jianwei Liu, Kamal Khayat, Wu Jian Long

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Poor Flexural and Damping Properties of Building Materials Damages Concrete Structures and Affects their Service Life When Concrete Structures Are Subjected to Dynamic Loads. Three Different Dosages (I.e., 0%, 0.3%, and 0.6%) of Organic Phosphonates (HEDP.4Na) and Different Pouring Methods (I.e., Conventional Pouring Method, 90°-Induced Pouring Method, and 150°-Induced Pouring Method) Were Designed to Improve the Flexural and Damping Performance of Fiber-Reinforced Alkali-Activated Slag Composites (FR-AASC). the Enhanced Mechanism of HEDP.4Na Was Revealed by Phase Analysis (X-Ray Diffraction, XRD), Pore Structure Analysis (Mercury Intrusion Porosimetry, MIP), the Heat of Hydration, and Scanning Electron Microscopy (SEM) Analysis. the Results Showed …

Urban Densification At Twin Creeks Apartments: High-Density Living With Low-Density Luxuries, Ryan Griswold

Construction Management

Urban sprawl is characterized by the rapid growth of the extent of cities and towns. In the United States, urban sprawl is greatly influenced by housing density. In the past half-century, developers have favored constructing and consumers have preferred living in neighborhoods of detached, single-family homes. This is because low-density living provides more housing services, or additional benefits, than most high-density developments, such as apartments and townhomes. Residents of low-density living often have more privacy, outdoor space, interior natural light, and many other benefits over residents of higher-density developments. However, Twin Creeks Apartments, located in San Luis Obispo, California, is …

Building Services Engineering March/April 2023

Building Services Engineering

No abstract provided.

Dlr Covid-19 Mobility Review (Phase 2a): Report On Cmr Economic Development & Business Community Feedback, Sarah Rock Dr., Robert Bradshaw Dr., David O'Connor, Odran Reid

Reports

This research reports on the findings from an area focused economic development and business community focused study of the Costal Mobility Route (CMR), which is intended to complement and extend research previously conducted in Phase 1 of Dún Laoghaire-Rathdown County Council’s (DLR’s) ‘Covid-19 Mobility & Public Realm Works’ project. This study is based on participant interviews, and is limited to businesses located directly along the CMR, as well as a number of business groups representing a wider area and a Local Enterprise Office.

While one company reported a significant decline in revenue that they attribute to the CMR, the remainder …

Effect Of Class C And Class F Fly Ash On Early-Age And Mature-Age Properties Of Calcium Sulfoaluminate Cement Paste, Sukanta K. Mondal, Carrie Clinton, Hongyan Ma, Aditya Kumar, Monday Uchenna Okoronkwo

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

To Promote the Sustainable Development of Eco-Efficient Calcium Sulfoaluminate (CSA) Cements through the Partial Replacement of the CSA Clinker with Supplementary Cementitious Waste Products, the Effects of Coal Fly Ashes on the Early-Age and Mature-Age Properties of a Calcium Sulfoaluminate (CSA)-Based Cement Paste Were Investigated. the Impacts of Both Class C and Class F Fly Ashes on the Rheological Properties, Hydration Kinetics, and Compressive Strength Development of CSA Cement Paste Were Studied. Rheology-Based Workability Parameters, Representing the Rate of Loss of Flowability, the Rate of Hardening, and the Placement Limit, Were Characterized for the Pastes Prepared with Fixed Water-To-Cement (W/c) …

Rheological Characterization Of Ultra-High Performance Concrete For 3d Printing, Arun R. Arunothayan, Behzad Nematollahi, Kamal Khayat, Akilesh Ramesh, Jay G. Sanjayan

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The authors recently developed a 3D-printable ultra-high performance fiber-reinforced concrete (3DP-UHPFRC) for additive construction of structural members with significantly reduced reliance on steel bars. This study investigates the rheological behavior of the developed 3DP-UHPFRC. The effects of two major factors affecting the performance of 3DP-UHPFRC, namely steel fiber volume (0, 1%, and 2%) and nano-clay (NC) content (0, 0.1%, and 0.2% by binder mass) on workability, static yield stress, dynamic yield stress, and apparent viscosity were determined. Test results showed that the inclusion of steel fibers and NC reduced the workability and led to a significant increase in the static …

Effect Of Additional Water Or Superplasticizer On Key Characteristics Of Cement Paste Made With Superabsorbent Polymer And Other Shrinkage Mitigating Materials, Kamran Aghaee, Ricarda Sposito, Karl Christian Thienel, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The use of superabsorbent polymer (SAP) coupled with expansive agent (EA) or shrinkage-reducing admixture (SRA) can effectively reduce shrinkage of cement-based materials. However, SAP particles at high contents can adversely affect rheological and mechanical properties. Securing proper workability can be accomplished by additional water or adjusting the superplasticizer (SP) demand. There is an uncertainty about the efficiency of these approaches to workability compensation. This study evaluates the effect of additional water or SP on key properties of cement paste made with SAP and relatively high content of EA or SRA. Macro and micro mechanisms underlying the effect of combined shrinkage …

Homogeneous Flow Performance Of Steel-Fiber Reinforced Self-Consolidating Concrete For Repair Application: A Biphasic Approach, Naimeh Nouri, Masoud Hosseinpoor, Ammar Yahia, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this study, fiber-reinforced self-consolidating concrete (FR-SCC) was considered as a diphasic suspension of fiber and coarse aggregate (F-A ≥ 5 mm) skeleton in mortar suspension with solid particles finer than 5 mm. The coupled effect of the volumetric content of fibers, coarse aggregate particle-size distribution, and rheological properties of the mortar on the passing ability and dynamic stability of various FR-SCC mixtures was investigated. Nine high-strength and 10 conventional-strength FR-SCC mixtures for repair application were proportioned with water-to-binder ratios (W/B) of 0.35 and 0.42, respectively, and macro steel fibers of 0.1%–0.5% volumetric contents. The dosages of high-range water-reducer (HRWR) …

Estimating Solar Energy Production In Urban Areas For Electric Vehicles, Shaimaa Ahmed

Theses and Dissertations

Cities have a high potential for solar energy from PVs installed on buildings' rooftops. There is an increased demand for solar energy in cities to reduce the negative effect of climate change. The thesis investigates solar energy potential in urban areas. It tries to determine how to detect and identify available rooftop areas, how to calculate suitable ones after excluding the effects of the shade, and the estimated energy generated from PVs. Geographic Information Sciences (GIS) and Remote Sensing (RS) are used in solar city planning. The goal of this research is to assess available and suitable rooftops areas using …

Properties Of Cement Mortar Containing Recycled High-Density Polyethylene (Hdpe), Amany G. Micheal Prof., Esraa Torky, Merna Amir

Centre for Advanced Materials

Millions of tones of plastic waste are generated globally and only less than 10 per cent has been recycled. It is crucial to segregate and circulate plastic waste and repurposing it for countless other uses. There are many ways to repurpose and reuse these discarded plastics. One use that can be examined is the use of plastic as partial sand replacement in mortar. To contribute to this important and valid discourse, the research studies the mechanical and thermal properties of recycled HDPE mortar as an active way of integrating plastic waste into the construction industry to partially eliminate some of …

Marshall, Il Brownfield/Superfund Site Project, Nathan Myers

2022 Fall Reports (Marshall, IL)

This course will examine modern public policymaking in the United States. We will examine the different forms that policy can take and how each branch of government can leave a lasting impact on policy. The course will investigate the environment in which policy in the U.S. is shaped and the key official and unofficial actors involved. The course will investigate how public policy issues are defined and earn a place on the policy agenda. The remainder of the course will focus on various criteria for evaluating policy: effectiveness, efficiency, equity, liberty, security, and resilience. The manner in which policy often …

Marshall Residential Development, Kimberly Smith

2022 Fall Reports (Marshall, IL)

Introduction and development of the design process through the exploration of abstract and realistic problem-solving applications. Design solutions are presented through the development of two- and three-dimensional presentation techniques.

Marshall, Il Housing Affordability Project, Nathan Myers

2022 Fall Reports (Marshall, IL)

This class is designed to provide a basic working understanding of statistical methods which are commonly used in the social sciences, including public administration. Students will learn the mathematical logic behind the procedures by calculating statistical formulas. Students will also gain proficiency in completing statistical procedures using Microsoft Excel (the Statistical Package for the Social Sciences, or SPSS, may also be used).

How Can Visual Programing Be Used To Aid The Development Of A Structural Scheme Design Process Utilising Geometric Data Within An Architectural Revit Model?, Ed Carthy, Kieran Lakhera O'Shea

Reports

The early-stage structural scheme design of a building is a complex task requiring the collection of multiple information categories such as geometry, loading and materials. The collection and review of this information is traditionally conducted in a 2D environment. This is inefficient, time-consuming, and tedious. This paper provides a review of how structural engineers’ understanding and implementation of BIM has evolved significantly in recent years, validated by extant literature in areas such as BIM automation, visual programming, and structural optimisation in the structural engineering sector. Structural engineers are growing more aware that BIM provides a vast repository of data to …

Plural Communities: A Cultural Mapping Project + A Framework Plan For Cherokee Village, Arkansas, Community Design Center

Community Design Center Project Reports

What do urban designers do with culture? How might we redevelop a mid-century modern planned community through the mapping of cultural influences that shaped it? We explored memory and heritage central to cultural mapping and its participatory-based forms of public inquiry. 54 drawings integrate maps, folklore materials, archived media, photographs, and new drawings into five synchronic cultural frameworks that shaped Cherokee Village—Native American heritage, Ozark pioneer and folk heritage, camping and scouting, midcentury planned communities, and regional modernism in design and planning.

Cherokee Village was developed within a mid-twentieth century planning ethos that valued uniformity …

An Updated Analytical Method For Predicting The Bracing Behavior Of Z-Purlin Supported Standing Seam Diaphragm Systems, Michael W. Seek

Engineering Technology Faculty Publications

Roof systems utilizing Z-purlins as a secondary member supporting a standing seam panel system are used extensively by the metal building industry. The Z-purlins rely on the diaphragm action in the standing seam panel system to provide lateral support and transfer forces to anchorages. The behavior of the standing seam system is highly nonlinear making prediction of the interaction between the Z-purlin and the standing seam system difficult. To better understand the behavior of the interaction between the purlins and the panel system, a series of non-linear shell finite element models were developed based on the test results of simple …

Higher-Order Effects In Biaxial Flexure Of Gfrp I-Section Beams, Zia Razzaq, Faridoon Z. Razzaq

Civil & Environmental Engineering Faculty Publications

A theoretical study of Glass Fiber Reinforced Polymer (GFRP) beams subjected to biaxial bending moments is presented with a focus on the influence of higher-order effects on maximum normal stresses. It is shown that the biaxial bending type of loading causes a dramatic increase in the maximum normal stress for a GFRP beam when induced torsional effects are included. The study demonstrates that the traditional first-order theory can grossly underestimate the maximum normal stress in a GFRP beam. Based on the numerical results presented using a higher-order theory which also accounts for induced warping normal stresses, the maximum normal stress …

Nucleotide Detection Mechanism And Comparison Based On Low-Dimensional Materials: A Review, M. Mustafa Azeem, Muhammad Shafa, Muhammad Aamir, Muhammad Zubair, Basma Souayeh, Mir Waqas Alam

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The recent pandemic has led to the fabrication of new nucleic acid sensors that can detect infinitesimal limits immediately and effectively. Therefore, various techniques have been demonstrated using low-dimensional materials that exhibit ultrahigh detection and accuracy. Numerous detection approaches have been reported, and new methods for impulse sensing are being explored. All ongoing research converges at one unique point, that is, an impetus: the enhanced limit of detection of sensors. There are several reviews on the detection of viruses and other proteins related to disease control point of care; however, to the best of our knowledge, none summarizes the various …