Digital Commons Network^™

Prospects Of Clean Cooking Energy In Africa - Transition Pathways And Implications, Joseph H. Kihedu Dr.

Tanzania Journal of Engineering and Technology (TJET)

Despite abundant renewable energy resources, African countries still suffer from energy poverty, particularly in cooking. Up to 2022, about 74% of the African population had no access to clean cooking energy. With focus to Sub-Saharan African population, 90% has no access to clean cooking energy which decrease by 7% when kerosene is included. Traditional cooking, which involves the use of charcoal and firewood, is associated with health problems, environmental degradation, socioeconomic issues, and gender inequality. Transitioning to clean cooking energy not only promises significant health benefits but also offers opportunities for sustainable economic development and environmental preservation. In this study, …

Development And Experimental Validation Of A Non-Invasive Blood Group Detection System, Nurath K. Nurudini

Tanzania Journal of Engineering and Technology (TJET)

An individual's blood group consists of red blood cell antigens whose composition is determined by protein presence, antigen structure, and gene series. Persons aged above six months have significant anti-A and/or anti-B in their serum. During transplantation and transfusion, ABO blood group identification is the most essential factor. The conventional method involves drawing blood samples from patients, and the blood group is determined based on the antigen-antibody reaction. This method consists of adding chemical reagents. However, this requires time of operation, and throughput analysis is high, and the process is also challenging to interpret. Accurate and rapid identification of blood …

Towards Metrology 4.0 In Developing Countries’ Manufacturing Industries, Jailos Nzumile

Tanzania Journal of Engineering and Technology (TJET)

A systematic literature review was conducted to unveil the status of the digital transformation of metrology in developing countries, as they are lagging in utilising fourth industrial revolution (IR4.0) technologies to transform manufacturing industries. A PRISMA technique was employed using various keywords to identify, screen, and select the relevant literature. Forty publications were selected for the review, mainly discussing IR 4.0 technologies in metrological operations. The results indicate that the digital transformation of metrology has yet to be initiated in developing countries. However, the employment of IR4.0 technologies in advancing metrological operations in manufacturing industries is mostly discussed in the …

Fuzzy Logic-Based Decision Support System For Adoption Of Industry 4.0 Predictive Maintenance By Manufacturing Industries, Fred E. Peter

Tanzania Journal of Engineering and Technology (TJET)

In the context of Industry 4.0, predictive maintenance enhances operational efficiency by optimizing processes, minimizing downtime, and improving cost-effectiveness. However, implementing predictive maintenance requires a systematic approach due to its complexity. This study collected expert input from 15 food and beverage manufacturing industries located in Dar es Salaam, Tanzania, using a purposive sampling technique. Six representatives were selected from each industry, and their opinions were analyzed using MATLAB 7.6 through a fuzzy logic inference system. The analysis focused on key factors influencing Industry 4.0 technology adoption for predictive maintenance, including adoption intention (strategic decision, equipment data, perceived benefit) and perceived …

Mechanical Properties Of Pineapple Braided Fabric Reinforced Epoxy Matrix Composite Fabricated Via Vacuum-Assisted Resin Infusion Moulding, Bwire S. Ndazi

Tanzania Journal of Engineering and Technology (TJET)

Fibres and fabrics obtained from lignocellulosic materials have attracted attention as reinforcements in polymer composites due to their competitive mechanical and ecological benefits. While the potential of randomly oriented pineapple leaves fibres (PALF) in composites have explored in previous studies, the mechanical behaviour of braided PALF fabric composites fabricated via vacuum-assisted resin infusion moulding (VARIM) remains relatively unexplored. In this study the tensile, compression and flexural strengths of epoxy-based composite containing 40 vol.% braided pineapple fabrics, fabricated using VARIM, for load carrying applications were investigated. The results revealed that the three-layered unbleached pineapple braided fabric composites exhibited a tensile strength …

The Role Of Internal Factors On Vehicular Mobility, Aziz Mdimi

Tanzania Journal of Engineering and Technology (TJET)

Vehicle mobility internal factors are influenced by the performance state of the road surface quality, governor, engine, gear train, differential unit and mobility unit. Studies on vehicular mobility models exist for off-road external factors but absent on on-road internal factors. The on-road internal factors model describes the vehicular mobility performance as a function of internal factors. In the current undertaking, results are generated by the determination of mobility performance characteristics with the application of 2nd Order Ordinary Differential Equations and using Laplace operator with MATLAB Software simulation. The effect of road surface against the time taken varies accordingly. At a …

Towards Effective Academia-Industry Collaborations: The Case Of Higher Learning Institutions In Tanzania, Fatuma S. Ikuja

Tanzania Journal of Engineering and Technology (TJET)

Industries are the main consumers of products from higher learning institutions (HLIs); graduates for employment and research outputs for socio-economic development. Research outputs from HLIs are commercialized as services or products facilitated by academia-industry collaborations. The collaborations are expected to address mismatch between labour market needs and HLIs’ products, which has resulted in graduates’ employability challenges. Despite their importance, effective academia-industry collaborations remain challenging. This study explores the effectiveness of Academia-Industry collaborations established by HLIs in implementing the Higher Education Economic Transformation (HEET) project (2021-2026) in Tanzania. One of the project objectives is to build functional linkages between industry and …

Energy Optimal Coverage Motion Trajectory Generation Using A Fourth-Order Motion Profile, Mathias Halinga

Tanzania Journal of Engineering and Technology (TJET)

Industrial machines are widely used in manufacturing sector to manufacture several products to meet customer demands. Most of these industries runs all the time throughout a day leading to high operating cost. To cut costs and satisfy customer demand for precise products, industrial machines’ motion generation is important in improving machine motion precision while using less energy. This study presents a coverage motion energy optimization which is generated by linear interpolation of each segment described by the fourth-order motion profile. The phase changes in the profile are attained with continuity of machine kinematic limits jerk, acceleration, and velocity, which are …

Demographic Characteristics And History Of Pulmonary Tb Treatment In Malang City In 2022-2023, Ema Novita Deniati, Zalva Hanny Fauzia, St. Mutrifatul Imthiatiyyah, Muhammad Thoriq Haidar Rantaka

Preventia: The Indonesian Journal of Public Health

Tuberculosis (TB) is currently in thirteenth place as the main cause of death globally. In 2022, at East Java there were 78,799 cases of pulmonary TB. The success rate for TB treatment in East Java is 89.01 percent or has not yet reached the target for the Treatment Success Rate indicator in 2022, which is 90 percent. Meanwhile in Malang City, in 2022 there were 2,417 TB cases and this will increase in 2023 to 2,716 cases. The increase in cases occurs because people still think it's trivial, especially when they cough and are reluctant to get checked, but when …

The Relationship Between Caffeine Consumption And Sleep Quality Of Students Of The Faculty Of Sports Science Universitas Negeri Malang, Windi Chusniah Rachmawati, Dian Mawarni, Lucky Radita Alma, Adiska Rahma

Preventia: The Indonesian Journal of Public Health

Coffee is a popular drink consumed in Indonesia, especially among people aged 17 until 25 years. Coffee contains thousands of natural chemicals, one of which is caffeine, which has negative impacts on health if consumed in excessive amounts. The purpose of this study is to describe the caffeine-based beverages consumed and sleep quality and to assess the association between caffeine use and sleep quality. This study used a cross-sectional design with 120 respondents who completed a questionnaire about the history of caffeine-based beverage consumption and PSQI sleep quality, PSQI is used to measure the state of sleep which consists of …

Improving Worker Health And Productivity: A Systematic Review Of Participatory Ergonomics In Construction, Agung Raharjo, Januar Ariyanto, Farahul Jannah

Preventia: The Indonesian Journal of Public Health

The construction industry is recognized to be physically demanding and is characterized by a range of occupational safety and health issues, including musculoskeletal disorders (MSDs) arising from repetitive movements, prolonged static postures, and physically strenuous working conditions. Participatory ergonomic interventions in which workers are involved in the formulation of the problems have been recommended as effective interventions to increase productivity and health in industries. The objective of this literature review is to explore the effects of participatory ergonomics on health outcome and productivity measures in construction. The review followed the PRISMA 2020 guidelines and included nine studies which examined various …

Quantum Analysis Of Protein–Ligand Binding By Integrating Structural Resolution, Sequence Homology, And Ligand Properties, Don Roosan, Samira Samrose, Rubayat Khan, Saif Nirzhor, Brian Provencher

Computer and Data Science Faculty Publications

Predicting protein–ligand binding affinity is a fundamental challenge in computational biology and drug discovery, complicated by diverse factors including protein sequence variability, ligand chemical diversity, and structural resolution. Here, we present an integrative study that combines classical machine learning and quantum-enhanced modeling to investigate how crystal structure resolution, sequence similarity, and ligand properties jointly influence binding affinity. Using a curated “refined” dataset from PDBbind and an expanded general dataset, we first conduct correlation and regression analyses to quantify the relationships among binding affinity, ligand descriptors (e.g., molecular weight, logP), and protein structural metrics (resolution, R-factor). We observe moderate positive correlations …

Waterpod: Evaluating Learner Engagement And Conceptual Understanding Through Gamified Virtual Reality, Leeza Eimeria Duller

Theses and Dissertations

The water and wastewater industry faces a growing workforce crisis due to high retirement rates, limited public awareness, and underrepresentation of technical talent. Traditional outreach methods have struggled to engage students or convey the complexity of water systems. This study evaluates WaterPOD, an interactive virtual reality (VR) simulation designed to introduce users to wastewater treatment processes and careers through immersive learning. Grounded in Social Cognitive Career Theory (SCCT), Cognitive Load Theory (CLT), and Constructivist Learning Theory (ConLT), the study examined how VR influences conceptual understanding and career perceptions. A mixed-methods study with 138 college students measured SCCT constructs, CLT- and …

Compact Space-Folded Multi-Resonator Duct Silencer With Broadband Noise Reduction And Minimal Flow Disturbance, Joshua Lloyd

Theses and Dissertations

Control and reduction of unwanted noise is a significant concern in many residential, commercial, and industrial fields. Specifically, ducted noise control is of increasing importance due to the complex challenges of ventilation requirements imposed on the system. This research presents a compact, space-folded silencer which achieves broadband attenuation of noise in ducted applications. Making use of axial arrays of side- loaded resonators, this structure allows for unobstructed fluid-flow through its center, resulting in a static fluid pressure drop across the device of only 14.5 Pa. In addition, due to the silencer’s configurable nature, the geometry can be tuned to meet …

Towards Future Sustainable Infrastructure: The Role Of Technical Audit In Tanzania’S Public Works, George C. Haule

Tanzania Journal of Engineering and Technology (TJET)

This study aimed to investigate the vital role and impact of technical audits in promoting sustainable infrastructure development in Tanzania. The role and effects of technical audits in long-term infrastructure development were studied using a mixed-methods approach with both quantitative and qualitative parts. Data were collected through analysis of technical audit documentation, a semi-structured questionnaire, and stakeholder interviews. The study revealed the various dimensions of infrastructure investment projects, including initiation and planning, design, procurement of contractors and consultants, contract management, environment, health, and safety. The technical audit findings reported weaknesses or non-performance issues in infrastructure planning at the national level …

Thermal Energy Storage System Using Silica Sand As Heat Storage Medium: Simulation Of Geita Gold Mine, Santos Kihwele

Tanzania Journal of Engineering and Technology (TJET)

Currently, Geita Gold Mine (GGM) relies on electrical energy from the national grid and diesel power generators to generate electricity for various industrial applications. The plant currently spends a large amount of money on generating power from diesel generators. The total annual cost of power generation from diesel generators including lubricants is USD 56,057,990. The total annual fuel cost is USD 53,531,805 for a total of 54,985,473 liters per year. Most of the power generated by the generators is consumed in the industrial thermal processes. Thermal energy applications at the plant are thermal drying of the extracted ores to remove …

Fuzzy-Ahp Based Decision Support System For The Selection Of Optimal Maintenance Strategy For Meter Gauge Railway Infrastructure: A Review, Hamisi J. Maulid

Tanzania Journal of Engineering and Technology (TJET)

There are many uncertainties and complexities associated with maintaining Meter Gauge Railway (MGR) infrastructure, which calls for a methodical approach to decision-making. The development and application of a fuzzy-AHP-based decision support system (DSS) to select the optimal maintenance strategy for the MGR are presented in this study. The review covers research from 2013 to 2023 and focusses on the use of Multi-Criteria Decision Making (MCDM) and Fuzzy Analytic Hierarchy Process (Fuzzy-AHP) techniques in railway infrastructure maintenance. To manage the inherent uncertainties and subjective judgements involved in maintenance decision-making, the Fuzzy-AHP methodology combines fuzzy logic with the Analytic Hierarchy Process (AHP). …

Evaluation Of Thermal And Emission Performances Of Briquettes Produced From Carbonized Corn Cob And Corn Husk, Karina S. Motani

Tanzania Journal of Engineering and Technology (TJET)

The Mozambican agro-industrial sector relies heavily on various crops, with maize being the most significant. During processing, substantial waste is generated, which is often discarded as organic matter or burned, contributing to environmental pollution and the loss of potential energy resources. This study evaluated the thermal and emission performance of briquettes made from carbonized corn cob (CCC) and carbonized corn husk (CCH), using cashew nut skin as a binder for clean cooking applications. The briquettes were assessed against firewood and charcoal as control fuels, focusing on several energy performance parameters: water boiling time (WBT), combustion index (CI), thermal efficiency (TE), …

Analysis Of An Improved Reliability Dual-Buck Structured Three-Level Flying Capacitor Inverter, Almachius Kahwa Dr.

Tanzania Journal of Engineering and Technology (TJET)

With the increased demand for high-reliability power converters in the electric drive-train and propulsion systems, the efforts to design and analyze converters with high fault tolerance have become apparent. Among the emerging trends to improve the reliability of power converters is the incorporation of dual-buck (DB) structures in traditional converter topologies. Thus, this paper studies a single-phase dual-buck structured three-level flying capacitor (FC) inverter. The dual-buck flying capacitor (DBFC) inverter was constructed in such a way as to suppress the shoot-through problems that may occur because of the switching mismatch and gate driver delay, as exhibited in the traditional FC …

Calibration Of Measurement Tools In The Experimental Test Rig For Hydropower Performance Evaluation, Ombeni J. Mdee

Tanzania Journal of Engineering and Technology (TJET)

The demonstration of a typical hydropower plant requires the development of a test rig with the installation of tools to measure the performance parameters. The measurement tools require a calibration process to improve the quality of recorded data. This study involved the calibration of traditional and automated measurement tools connected to the hydropower test rig through an Arduino microprocessor. The automated measurement tools included a pressure transducer, flow meter, digital tachometer, and torque transducer, while traditional measurement tools, including a pressure gauge, concrete water tank, contact tachometer, and force lever arm balance, were connected in the same test rig during …

Review On Gas-To-Liquids Conversion Technology: Lessons From Case Studies And Potential Strategies For Implementation In Tanzania, Joseph H. Kihedu

Tanzania Journal of Engineering and Technology (TJET)

This review paper explores the transformative potential of Gas-to- Liquids (GTL) technology for harnessing Tanzania's vast natural gas resources. With significant discoveries of natural gas reserves totalling up to 57 Tcf in fields such as Songosongo, Mnazi Bay, Block 1, 2, 3 and 4. Tanzania is positioned to leverage GTL technology to convert these resources into high-value liquid fuels like gasoline, diesel and naphtha. Review of GTL process, its products and applications has been done. By analysing successful GTL projects globally and drawing lessons applicable to Tanzania, this paper provides strategic recommendations for policymakers and stakeholders to foster GTL development. …

A Review Of Lithium-Ion Battery Capacity Fade Deceleration At Power Fluctuations In Renewable Energy Systems, Isaac Gwayi

Tanzania Journal of Engineering and Technology (TJET)

Application of lithium-ion (Li-ion) batteries to store energy in renewable energy systems (RESs) is increasing due to their promising properties. Therefore, it is crucial to understand aging behaviours of Li-ion battery during RES life time as this directly affects cost of energy. Li-ion battery aging can be categorised into calendar aging and cycle aging. Calendar aging depends mainly on temperature and state of charge (SoC). In addition to temperature and SoC, cycle aging depends also on charge and discharge current rates and cut-off voltages. Higher current rates lead to faster Li-ion battery aging. It is necessary to identify appropriate battery …

Assessment Of Maintenance Performance Level Of Selected Hydropower Plants In Tanzania, Mahamudu H. Mtebwa

Tanzania Journal of Engineering and Technology (TJET)

Despite significant progress in increasing electricity access to over 78%, electricity reliability in Tanzania remains a concern, with frequent power outages reported. Maintenance issues in hydropower plants have been identified as a critical factor contributing to this problem. However, the specific maintenance performance levels have not been fully assessed. This study conducts a comprehensive evaluation of the maintenance performance of four key hydropower plants: Kidatu (204 MW), Kihansi (180 MW), Mtera (80 MW), and New Pangani Falls (68 MW). Data collected from staff surveys and maintenance records between 2018 and 2022 were used in the study. Although staff demonstrated a …

Scoring System For Screening Fitness To Work For Offshore And Onshore Remote Area Worker, Kasyunnil Kamal

Occupational and Environmental Medicine Journal of Indonesia

Background: About 10-15% of medical examinations of workers at upstream oil and gas companies are not conducted properly. In some cases, workers die at worksites. Many doctors carrying out the assessment lack the competency to assess occupational risks. In this study, we developed a scoring system for ‘fitness for work’ assessment, which can be used by trained doctors.

Methods: Diagnostic testing was done with comparing the results of the determination screening fitness for work using a scoring system with the determine fitness for work results by Occupational Medicine Specialist as a gold standard in the same group. The entire 607 …

Design And Control Of A Versatile Modular Soft Robotic System With Integrated Resource Sharing And Self-Reconfiguration Capabilities, Joshua Knospler

Theses and Dissertations

Modular, self‑reconfigurable soft robots promise unprecedented versatility by combining the compliance of soft materials with the adaptability of modular architectures. This thesis presents an integrated system of pneumatic, bending-type soft actuator modules. Modules are compact and fully equipped with tunable magnetic and electromechanical connections for low‑power attachment and detachment and a novel power-air-communication (PAC) connector for seamless sharing of electricity, compressed air, and digital signals. This work examines two representative assemblies: ManusBot, a pinching gripper, and TendrilBot, a versatile linear configuration for various tasks. Their grasping performance, variable stiffness, and radial support capabilities are characterized. A magnetic interlock and an …

Shelf Life And Physicochemical Properties Of Bitter Melon Fruit (Momordicha Crantia, L) Stored At Low Temperature Using Edible Natural Coatings Made From Coconut Oil And Beeswax, Ummi Rohajatien, Budi Wibowotomo, Nico Atmawijaya, Citra Diah Permata, Aly Imron

Bulletin of Culinary Art and Hospitality

Pare fruit is a fruit that has identical characteristics, namely having a bitter taste when consumed. Cultivation of bitter gourds in Indonesia is relatively easy with a favorable tropical climate, but post-harvest handling and storage at room temperature are less effective so that bitter melons rot quickly. So, an edible coating effort was made. This study aims to determine the effect of the ratio of coconut oil and beeswax as an edible coating on the physical quality, weight loss, and antioxidant capacity of bitter melon (Momordicha crantia L.). This experimental study used a completely randomized design (CRD) with two repetitions …

Purchase Motivation At Dimsum Restaurants In Medan. The Perspectives Of Lifestyle And Social Enjoyment, Efin Shu, Calvin Riando

Bulletin of Culinary Art and Hospitality

In Indonesia, dimsum has become a popular food choice due to its affordability and variety, making it a staple in many communities. The purchase motivation for dimsum menus is usually driven by the desire for a taste of tradition and a sense of community, as dimsum is frequently delighted with family and companions. The comfort and reasonableness of dimsum also contribute to its popularity, making it consumed as a lifestyle for numerous consumers. The reason for this research is to investigate the influence of lifestyle on purchase motivations with the moderation of social enjoyment at dimsum restaurants in Medan. The …

Social Determinants Of Dementia Among Older Adults In Samarinda’S Urban Area, Lisa Wahidatul Oktaviani, Ghozali Ghozali, Ferry Fadzlul Rahman, Maya Agustin Ulan Ari

Preventia: The Indonesian Journal of Public Health

Improving the quality of health and welfare of the population has an impact on increasing the number of lives in Indonesia. As a result, the number of elderly people and their proportions is increasing. Dementia is a condition where cognitive decline is so severe that it affects daily activities and social interactions. This condition of cognitive decline usually begins with a decrease in memory or memory abilities. Dementia that occurs among the elderly is caused by several factors, namely lifestyle, cognitive activities, family support, Activity Daily Living (ADL), self-esteem, quality of life, smoking behavior, knowledge, physical activity and sleep quality. …

Adapting A Personalized Normative Feedback Intervention For Graduate Student Drinkers, Faith Shank

Theses and Dissertations

On average, graduate students consume eight drinks per week, meeting criteria for heavy drinking and highlighting the need for a cost-effective intervention. The current study examined the efficacy of personalized normative feedback (PNF) for reducing heavy drinking in graduate students. Study 1 examined the feasibility and acceptability of the intervention content to inform a randomized controlled trial (RCT) of the intervention. Results from qualitative interviews with 13 graduate students who interacted with the intervention content preferred to receive feedback about peers enrolled in the same type of degree program. Study 2 was an RCT using PNF from peers with the …

Visual Tracking And Its Relationship To Dynamic Visual Acuity Among National Youth Foil Fencing Team Athletes, Ishraq Ghalib Oudah, Huda Shihab Jari, Hind Salem Taih, Asal Hassan Sameer

Modern Sport

The significance of this study lies in its focus on the relationship between visual tracking and dynamic visual acuity, both regarded as essential perceptual abilities influencing technical and dynamic performance in foil fencing. This supports coaches and specialists in designing effective training units to improve players' visual and motor efficiency. Given the interactive, fast-paced nature of the sport-which demands instantaneous reactions and high precision in thrusting-there is a need to determine the impact of visual tracking on performance quality. The research problem arose from the authors' observation of the limited attention to visual perceptual aspects in preparation programs, despite their …