Digital Commons Network^™

Ultrasonic Technique In Treating Wastewater By Electrocoagulation, Najem Al-Rubaiey, Mohammed Al-Barazanjy

Engineering and Technology Journal

Electrocoagulation Treatment can be considered as a favorable tool for the removal of many pollutants of various forms of wastewater. These pollutants may include the removal of colloidal, the breaking-up of emulsions and heavy metals. This process consists of the disintegration of the anodes (usually iron or aluminum), exciting the creation of coagulant mixtures in wastewater. That will aid to coagulate contaminants and generate bubbles in favor of mixing and elimination of solids suspension by flotation. Recently, the arrangement of using this technique with other treatment tools has turned out to be an interesting subject leading to an improvement in …

Environmental Impact Assessment For Brick Factory In Baghdad, Iraq, Saadi Al-Nuzal, Salih Al-Bakri, Sara Zankana

Engineering and Technology Journal

The environmental and social impacts of bricks factory based on the information's collected from old brick factories in Al-Nahrawan. This information includes water, air and soil sample analysis, community questionnaire, climate and topography of the region and standards to create model for modern brick factory. Practically the results of the analysis of soil pH, exceed the determinants of the WHO, while some cations such as Ca2+, Mg2+, Zn2+, Cr3+, Ni2+ , carbon content, and TDS were within the limit. High values for volatile organic compounds, PMs, TSP, NO2 and SO2 resulting from the combustion of the fuel used in the …

Potential Of Ethylhexyl Ester Oil To Enhance Drilling Of Hthp Wellbores, Lina Jassim, Robiah Yunus, Suraya Abdul Rashid, Amar Salleh Salleh

Engineering and Technology Journal

Ester-based drilling fluids have been accepted as an alternative to mineral oils in drilling applications and currently being utilized to drill oil or gas wells around the world. However, the ester-based fluids have deficiencies that limit its ability to carry and transfer drilled solids, stabilize the wellbore and drill the extended reach wells. Several approaches have been considered to overcome the ester limitations. Thus, the main aim of this study is to overcome these limitations by developing the high performance ester-based green drilling fluids for deep and ultra-deep wells. The low-pressure technology was applied in the synthesis of the ester …

The Role And Important Of Internet Of Things In Building Sustainable City, Nahla Alwan, Muna Al-Nuaimi

Engineering and Technology Journal

Every year many people migrate from country to city to live there. This will load a big pressure on the whole living in the city, Baghdad city also suffer from this problem in addition to other found problems like energy consumption , waste accumulate , Traffic congestion, noise, environmental pollution. To offer a good sustainable future living to population without any damage to environment and to solve many problems , one can use internet of things which is the connection network of the things especially with high spread of networks now which Internet of things based on it .the purpose …

Green Synthesis, Characterization And Antimicrobial Activity Of Titanium Dioxide Nanoparticles Using Laser Ablation Technique, Azhar Haleem, Ruaa Abbas, Abdulhadi Kadhim

Engineering and Technology Journal

Titanium dioxide nanaoparticles (TiO2 NPs) were prepared using laser ablation technique by ablation of titanium target immersed in distilled de-ionized water (DDW) by Q-switched pulsed Nd:YAG laser of 1064 nm, 1 Hz, (490) mJ and 700 pulse. UV-visible spectrophotometer and Transmission Electron Microscopy (TEM) were used to characterize the optical and morphological properties of prepared nanoparticles, respectively. The absorption spectrum of TiO2 NPs was at ultraviolet-region (214 nm) due to Surface Plasmon Resonance (SPR), and the particles size distribution of the prepared nanoparticles ranged from 30 to 100 nm. The antifungal activity ofTiOR2R NPs was carried out against Microsporum canis. …

The Use Of Photocatalytic Cementitious Coatings To Reduce Nitric Oxide From Ambient Air, Ayat Hussian, Riyad Al Anbari, Maan Hassan

Engineering and Technology Journal

Titanuim dioxide represents a novel photocatalyst material that can be used in different ways for air pollutants remediation. Air pollutants that are spreaded in the surrounding air could be transferred to more complex materials, especially in the presence of sunlight. To study the possibility for the reduction of these pollutants a laboratory tests have been conducted on the coated specimen substrate by using nitric oxide as pollutant gas, and there efficiency in gas removal was monitored with time. Two different particle sizes of TiO2 have been used; micro with particle size range between 150-200 nm and nano PC105 with particle …

Studying The Effect Of Ambient Temperature On Wastewater Degradation In Simulated Self-Purification Aerated Sewer System, Tala Al-Khateeb, Riyad Al-Anbari, Kareem Al-Jumaili

Engineering and Technology Journal

Designing and operating a simulated gravity sewer system had been accomplished in the current research. The design had been provided with aeration system in order to deliver oxygen to microorganisms presented in sewage water. The system had been used in three different seasons in order to investigate the ambient temperature effect on treating wastewater. The results revealed that ambient temperature had a significant role in organic waste degradation powered by the presence of air into sewage pipes and level tanks. Maximum degradation measured in terms of chemical oxygen demand removal (RCOD) was recorded to be 14.28 under 30 OC ambient …

Potential Of Alfalfa For Use In Phytoremediation Of Soil Polluted With Total Petroleum Hydrocarbons, Abdul Hameed Al-Obaidy, Riyad Al-Anbari, Sara Hassan

Engineering and Technology Journal

Remediation technology is a promising technique decrease pollutant like hydrocarbons from the environment. An experimental work was made at green house of University of Technology in order to study the effect of crude oil on the vegetate growth and to measure the decrement which happened on shoot height, germination rate and the reduction of total petroleum hydrocarbon (TPH), which result, by this phytoremediation technique. The samples of soil were measured for TPH reduction and removal by Horiba model (oil content analyzer) OCMA–350. Five doses were used in this experiment (0 control, 10x103, 30 x103, 50 x103, 75 x103) (mg crude …

Density And Ultrasonic Pulse Velocity Investigation Of Self-Compacting Carbon Fiber- Reinforced Concrete, G.A. Salman

Engineering and Technology Journal

comprehensive research has been carried out to understand the effect of adding carbon fibers to density and ultrasonic pulse velocity of self-compacting concrete. Fifteen SCC mixes were prepared with two types of mineral admixtures and carbon fibers. Metakaoline and silica fume were used as mineral admixtures while carbon fibers were used as fiber inclusions. Two different fiber length (6mm and12mm) and fiber fraction (0.1 % and 0.5 %) was used. Different parameters such as slump flow diameter, T500 time, V-funnel time, blocking ratio and filling height difference were used to evaluate fresh state properties. Air-dry density and Ultrasonic Pulse Velocity …

Design A Fuzzy Pid Controller For Trajectory Tracking Of Mobile Robot, M.J. Mohamed, M.Y. Abbas

Engineering and Technology Journal

In this paper, a trajectory tracking control for a non-holonomic differential wheeled mobile robot (WMR) system is presented. A big number of investigations have been used the kinematic model of mobile robot which is a nonlinear model in nature, thus a hard task to control it. This work focuses on the design of fuzzy PID controller tuned with a firefly optimization algorithm for the kinematic model of mobile robot. The firefly optimization algorithm has been used to find the best values of controller's parameters. The aim of this controller is trying to force the mobile robot tracking a pre-defined continuous …

Effect Of Polymer Additives On Permeability Of Asphalt Concrete Mixtures, H.H. Jony, M.M. Hilal, D.S. Helan

Engineering and Technology Journal

The presence of water in the pavement structure causes early deterioration and leads to less pavement durability as a result of loss of bond between aggregate and binder and may causes loss of strength and stability in mixture, The main goal of this study was to investigate the effect of various polymer additives on permeability of asphalt concrete mixture. The surface wearing coarse type IIIA was chosen in this study. Three types of polymer additives were used in this study; (7% Latex Emulsion (LE), 7% Poly Vinyl Acetate with 4% Styrene Butadiene Styrene (PVA + SBS) and 8% Ethylene Diamine …

Composition Design Modeling And Experimental Verification Of (Co Ni Al) Shape Memory Alloys, M.N. Arbilei

Engineering and Technology Journal

The most important concepts to apply a shape memory alloy in manyindustrial applications is the composition design that controls thetransformation temperatures. In this paper, two mathematical models werecreated to predict the transformation temperatures for poly-crystalline (Co-Ni-Al) alloys. The data that was depend on to find the relation between chemicalcomposition and transformation temperatures were concluded from previouswork and approved by preparing samples in investigation practically. Fourdifferent alloys were prepared to verify this relation. It was indicated that thebest criteria that present the chemical composition is the (e/a) and make thealloy applicable for different applications. These suggested chemicalcompounds could be controlled and …

A Multiband Printed Slot Antenna Loaded With Trapezoidal Slots For Wlan And Wimax Applications, H.T. Ziboon

Engineering and Technology Journal

In this paper, a multiband printed antenna has been proposed. The antenna structure is inspired from that of the classical multi-cavity magnetron resonator. The antenna structure is composed of a slot annular ring structure etched on the ground plane of a substrate. The outer circle of the annular ring is loaded with radially arranged small trapezoidal slots. While on the other side of the substrate, the antenna is fed with a 50-Ohm microstrip line. A parametric study has been conducted to explore the effect of the different antenna dimensions on its performance. The results show that the proposed antenna offers …

Surface Roughness Evaluation In Wedm Using Taguchi Parameter Design Method, S.H. Aghdeab, V.N. Najm, A.M. Saleh

Engineering and Technology Journal

Machining of hard metal is difficult by conventional method to obtain high accuracy where the dimensional accuracy is the main factor. Wire electrical discharge machining (WEDM) extensively used, which is mostly used in machining of conductive materials by using precisely controlled sparks that occur between a very thin wire and a workpiece in the presence of a dielectric fluid. This study serves in studying surface roughness (SR) of high speed steel (HSS) using taguchi method to design the experiment, this was achieved with utilizing different wire cut machining parameters and study the behavior of these control parameters such as pulse …

Experimental Investigation Of Wire Edm Process Parameters On Heat Affected Zone, V.N. Najm

Engineering and Technology Journal

It is vital to study the impact of heat since it has an unwanted phenomenon on the operating life of parts produced, which is in turn effect the cost of production. when dimension accuracy is the primary function Wire cut machining comprehensively used specially when machining hard metal by using precisely controlled sparks that occur between a very thin wire and a workpiece in the presence of a dielectric fluid. The aim of this research is to study the effects of some Wire Electrical Discharge Machining (WEDM) variables on heat affected zone, white layer and Surface Roughness (SR) of high …

Indian Number Handwriting Features Extraction And Classification Using Multi-Class Svm, H.A. Jeiad

Engineering and Technology Journal

In this paper, an Indian Number Handwriting Recognition Model (INHRM) is proposed. Mainly, the proposed model consists of four phases which are the image acquisition, image preprocessing, features extraction, and classification model. Initially, the captured images of the handwritten Indian numbers were enhanced and preprocessed to obtain the skeleton for the interested object. The extracted features of the handwritten Indian numbers were obtained by calculating four parameters for each captured number sample, these parameters are the number of starting points, the number of intersection points, the average zoning which consists of four values, and finally, the normalized chain vector of …

Design And Simulation Of Six-Band Triplexer Filter For Wlan Systems, A.S. Ezzulddin, S.K. Khaleel

Engineering and Technology Journal

This paper presents microstrip triplexer with 6 bands frequency responses. The design of triplexer uses 6 cross coupled resonators based on step impedance resonator. Each one of these resonators has short or open-ended section that initiates dual-band response with a large rejection band. The presented device has 3 two-pole dual band filter channels that are joint with regular T-shaped feeders. This triplexer has miniature area in term of

H-Infinity Model Reference Controller Design For Magnetic Levitation System, H.I. Ali

Engineering and Technology Journal

In this paper, a new robust approach based on combining the model reference control with H-infinity technique is proposed. The goal of the proposed controller is to obtain an adequate transient response which may not be obtained when only H-infinity technique is used. This is done by adding the model reference block to the standard H-infinity feedback configuration. Then the overall block diagram is formulated by linear fractional transformation (LFT). The Magnetic Levitation which is a highly nonlinear, open loop unstable and uncertain system is used to show the effectiveness of the proposed controller. The results show that the proposed …

Accuracy Assessment Of World View-2 Satellite Imagery For Planimetric Maps Production, A.Z. Khalaf, I.A.K. Alwan, T.A. Kadhum

Engineering and Technology Journal

A planimetric map of scale 1:10,000 meets the requirements of a large segment of user’s maps for instance urban city planners and various GIS implementations. Nowadays, a very high-resolution satellite images, such as World View02 (WV02) with spatial resolution of 0.5 m, are very important to produce planimetric maps or update existing ones. Main aim of this research is the assessment of WV02 image for production of the planimetric photomap of scale 1:10,000 with class 1 according to ASPRS standards (ASPRS give accuracy tolerances for map scales at 1:20,000 or larger, this accuracy reported as Class 1, 2, or 3). …

Ancient Wisdom & Its Cultural Relevance: Reimagining Deeper Learning In Science Classrooms Through The Lens Of Yoga And Vedānta, Raaghav Pandya

Journal of Contemplative and Holistic Education

Contemporary calls to reconceptualize how science is taught and understood have brought deeper learning to the forefront of education at-large for its emphasis on critical perspectives, creativity, and student-centered inquiry. Yet this paper argues that its prevailing framework remains constrained by Cartesian dualism, a materialist foundation that disassociates the individual from self, other, and nature, and falls short of addressing the mental health, environmental, and cultural challenges facing youth today. To address this limitation, this paper proposes a complementary convergence between deeper learning and the contemplative traditions of Yoga and Vedānta, whose ancient paradigms of self-inquiry, interconnectedness, and well-being offer …

Closing The Gap In Offshore Wind Environmental Evidence Chains: A Workshop-Derived White Paper, Jiaxin Chen, Lilian Lieber, Matthew Palmer, Dan Lear, Deborah Greaves

School of Biological and Marine Sciences

Offshore wind development is accelerating at a time when environmental assessment is increasingly required to support timely consenting, cumulative-effects understanding, nature recovery, regional planning, floating offshore wind deployment and public trust. The workshop underpinning this White Paper was convened in recognition that the sector's central challenge is no longer simply a lack of data, but the weak connection between data, monitoring approaches, models, uncertainty, governance and decision-making.Environmental monitoring often remains project-specific and receptor-focused, while models remain component-specific or scenario-specific. Data systems are similarly fragmented across owners, repositories, formats, access arrangements and project lifecycle stages. Yet regulators and statutory advisers require …

Rockin’ Rover On The Rainbow Road, Michael Kolta, Lawrence Burgee, Ying Yuan

Transformations

This paper presents a progressive series of age-appropriate lesson plans for grades K-12 that all use the same interdisciplinary activity to educate students about Science, Technology, Engineering, Art, and Mathematics (STEAM) simultaneously. Technology from Texas Instruments (TI) was employed including a TI Nspire graphing calculator that can run Python programs, a TI Innovator Hub, and a TI Rover. The TI Rover is a small, robotic car that has sensors and is controlled by the calculator via the Hub hardware interface. A Python program was developed that uses the color sensor in the Rover to detect the color on colored paper …

Evaluating Data Management Practices And Ontology Development For Transportation Safety Assets, Brig Dean Adams

All Graduate Theses and Dissertations, Fall 2023 to Present

Data has begun to permeate transportation agencies, with every process, asset, and event generating a great volume of data. This data helps engineers and decision makers determine maintenance schedules, devise infrastructure investment strategies, improve safety, and plan for future needs. Due to the size of transportation agencies and the diversity of the data they collect, their data is often stored in different systems, managed by different groups, and described using inconsistent terminology. These challenges make it difficult to locate information, combine data from multiple sources, and confidently use data to support important decisions.

This research examined how transportation safety asset …

The Aggregation Of Microplastics By Enhancing Extracellular Polymeric Substance Production In Pseudoalteromonas Sp. Ncimb 2021 To Improve Removal Efficiencies In Environmental Matrices, Janelle L. Mercer

All Theses

Microplastics (MP) are ubiquitous in the natural environment and are a growing threat due to their small size and durability. Plastics are released into the environment through improper waste management, wastewater treatment outfalls, industrial spills, agricultural runoff, and landfills. These particles breakdown into secondary MP through degradation pathways. MP, less than 5 mm, require intricate removal techniques from water systems. Filtration techniques, though viable and effective, have implementation constraints due to high cost, maintenance demands, and filter fouling. By integrating coagulation and flocculation processes prior to filtration, MP removal efficiencies can increase, while minimizing operational challenges during filtration. Extracellular polymeric …

Purdue University General Institutional Description, Purdue University Office Of Research

University General Facility Boilerplate Descriptions

Overview of Purdue University mission, statistics, and key cross-campus infrastructure.

Modeling Of Air-Water Filled Rubber Dam Under Hydrostatic Conditions, Qusay Khaleel, Thair Khayyun, Khudhayer Abdullah

Engineering and Technology Journal

Inflatable dams, also called rubber dams, are flexible cylindrical inflatable and deflatable structures attached to a rigid base; these dams are basically cylindrical tubes made of rubberized material and inflated by air, water, or a combination of the two. In this paper, the air/water inflatable dam was studied and analyzed numerically using ANSYS software. The 3-parameter Mooney-Rivlin Model was used to model the rubber material of the dam. At first, a physical model from literature was used to calibrate the results of the ANSYS software, and then a new model was analyzed with different dimensions and conditions. Thirty-six simulations were …

Size Effect On The Shear Strength Of Reinforced Concrete Beams, Hind Jaber, Kaiss Sarsam, Bassman Muhammad

Engineering and Technology Journal

According to research, as the depth of a beam increases, the section's shear strength can be expected to decrease. The size effect is a phrase that has been used to describe this tendency. Testing of unreinforced specimens under shear has also shown that the shear strength might be lower than what is typically anticipated in the design. As a result, it is critical to comprehend the behavior of these structures, as they may be influenced by a size impact. Sixteen reinforced concrete beams of different rectangular cross-sections without stirrups were tested. The tested beams were simply supported made of high-strength …

Computation Of Climatic Water Balance Of Al-Sulaymania Meteorological Station For The Period 1980-2016, Kurdistan Region, Northeast Of Iraq, Muayad Ismail, Faaeza Abd-Ulkareem, Tariq Abed Hussain

Engineering and Technology Journal

AL-Sulaymania city is located in the northeast of Iraq at an altitude of 845 m from the sea levelbetween longitudes (44 30 00 – 46 20 00) east and latitudes (34 33 00- 36 30 00) north. It covers an area of approximately 20000 km2. The study area includes several geological formations (from the oldest to the earliest), Balambo Formation (Early Cretaceous), Qumchuqa, Kometan, Shiranish, Tanjero, Kolosh, Sinjar Formation and Quaternary deposits. The climatic data recorded by AL-Sulaymania meteorological station for the period (1980-2016) shows that the total falling rain was (423.86) mm, the temperature was (13.88 ° C), relative …

Effect Of Recycled Aggregate On Behavior Of Tied And Spiral Reinforced Fibrous Circular Short Columns, Eyad Sayhood, Mohammed Al-Hamdani, Jabbar Sahan

Engineering and Technology Journal

This study focuses on studying the behavior of fibrous circular short columns (tied and spirally reinforced) using recycled coarse aggregate (f'c, ft, Ec, and fr) by using recycled aggregates with comparison to normal aggregates with and without using steel fibers. For this purpose, ten (10) short columns were cast at five groups each of two circular columns(tied and spiral of 150 mm radius x 600mm height) with different percentages of recycled coarse aggregate (0%, 50%, and 100%) and different percentages of steel fiber (0%, 0.5% and 1%). The study showed that when adding the 50% normal aggregates with 50% recycled …

Removal Of Heavy Metal Ions From Wastewater By Carbon Nanotubes (Cnts), Waleed Frayyeh, Zainab Mohammed, Abdulkhaleq Mahmood

Engineering and Technology Journal

This work is an attempt to remove cadmium (II) from wastewater by adsorption on multi-walled carbon nanotubes (MWCNTs) and functional group of carbon nanotubes (fMWCNTs) by using the batch process system and continuous reactor. In the batch reactor, the main variables that govern process efficiency such as the initial Cd (II) concentration, MWCNTs dose, contact time, stirring speed, and pH were studied. The experiments revealed that the amount of cadmium absorption (II) was higher on the increasing fMWCNTs dose and stirring speed. In addition, it decreased significantly with a decrease in the initial concentration of cadmium. The optimum values for …