Open Access. Powered by Scholars. Published by Universities.®

Digital Commons Network™

Open Access. Powered by Scholars. Published by Universities.®

2025

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 39331 - 39360 of 39707

Full-Text Articles in Entire DC Network

Design And Optimization Of A Miniaturized Spiral Antenna For Ultra-Wideband Applications, Mckennan Starkey, Cody Goins, Victor Khilkevich, Daryl Beetner Jan 2025

Design And Optimization Of A Miniaturized Spiral Antenna For Ultra-Wideband Applications, Mckennan Starkey, Cody Goins, Victor Khilkevich, Daryl Beetner

Electrical and Computer Engineering Faculty Research & Creative Works

Ultra-wideband communication in the frequency range from 3.1 to 10.6 GHz is popular for short range wireless networks. Designing a wideband antenna that covers the entire 7.5 GHz band is challenging, particularly if the antenna should be small, unobtrusive, and should effectively communicate with another antenna as their positions and orientations change. A miniaturized wideband circularly polarized Archimedean spiral antenna is developed in this study which is wideband and circularly polarized. Miniaturization and optimization techniques are introduced to enable an antenna size of $30 \text{mm} \times 30 \text{mm}$ and a thickness less than 0.5 mm.

Go to article

A Non-Destructive And Simple Setup Method For Dielectric Liquid Characterization In A Wide Frequency Range With Djordjevic-Sarkar Model, Reza Vahdani, Reza Asadi, Seyedmehdi Mousavi, Xiaoning Ye, Donghyun Kim Jan 2025

A Non-Destructive And Simple Setup Method For Dielectric Liquid Characterization In A Wide Frequency Range With Djordjevic-Sarkar Model, Reza Vahdani, Reza Asadi, Seyedmehdi Mousavi, Xiaoning Ye, Donghyun Kim

Electrical and Computer Engineering Faculty Research & Creative Works

This paper introduces a non-destructive and simple setup method for characterizing dielectric liquids over a broad frequency range (up to 30 GHz) using the Djordjevic-Sarkar model. By employing a differential microstrip line and comparing scattering parameters in air-filled and liquid-immersed scenarios, the proposed method achieves precise dielectric constant (DK) and dissipation factor (Df) extraction. 2 Liquid samples (PAO4 and DC-15) were tested using this method. Validation against the cavity resonance method demonstrates a strong agreement for the extracted DK values, with a relative error of less than 1.5 %, indicating high accuracy. However, the method is less sensitive to Df, …

Go to article

Impact Of Voltage Regulator Modules On Power Distribution Network Impedance, Hanyu Zhang, Zhiping Yang, Alvis Hsu, Ryan Hou, Chulsoon Hwang Jan 2025

Impact Of Voltage Regulator Modules On Power Distribution Network Impedance, Hanyu Zhang, Zhiping Yang, Alvis Hsu, Ryan Hou, Chulsoon Hwang

Electrical and Computer Engineering Faculty Research & Creative Works

The voltage regulator module (VRM) impacts the power distribution network (PDN) impedance in the low frequency range. The effect of VRM is essential for reliable PDN analysis and simulation. However, the existing VRM models for power integrity (PI) simulation lack an in-depth understanding of the effect of the feedback control in the VRM. In this paper, the impact of the VRM control loop on the PDN impedance is investigated. The relationship between the VRM output impedance and the PDN impedance at the IC input pin is derived. The output impedance of a VRM is analyzed using small signal analysis. Eventually, …

Go to article

Method Of Termination With Absorbers For Far-End Crosstalk Measurements, Daniel L. Commerou, Reza Asadi, Sathvika Bandi, Seyed Mostafa Mousavi, Xiaoning Ye, Donghyun Kim Jan 2025

Method Of Termination With Absorbers For Far-End Crosstalk Measurements, Daniel L. Commerou, Reza Asadi, Sathvika Bandi, Seyed Mostafa Mousavi, Xiaoning Ye, Donghyun Kim

Electrical and Computer Engineering Faculty Research & Creative Works

The increasing demand for higher data rates in modern electronic systems has heightened the challenges of maintaining signal integrity, particularly in addressing farend crosstalk (FEXT). This paper presents a novel approach using absorber-based terminations to perform signal integrity measurements in high-speed PCB designs. The performance of magnetically and electrically loaded absorber materials is evaluated against traditional 50Ω terminations with performance parameters such as S-parameters, Time-Domain reflectometry (TDR), and induced far-end crosstalk voltage. Simulations and experimental measurements demonstrate that electrically loaded absorbers can achieve performance characteristics comparable to high-quality terminations, particularly for reflections and impedance matching. The results indicate that absorbers …

Go to article

Extended S-Parameter Model Of The Power Distribution Network For Rapid Coupling Predictions, Cody Goins, Aaron Harmon, Mckennan Starkey, Kristen Donnell, Victor Khilkevich, Daryl Beetner Jan 2025

Extended S-Parameter Model Of The Power Distribution Network For Rapid Coupling Predictions, Cody Goins, Aaron Harmon, Mckennan Starkey, Kristen Donnell, Victor Khilkevich, Daryl Beetner

Electrical and Computer Engineering Faculty Research & Creative Works

Power and return planes are part of the power delivery network of almost all modern high frequency printed circuit boards. These power and return planes can form the basis of unintended radiated emissions from, or radiated coupling to, these boards. Predicting coupling to complex systems is a difficult problem and typically reserved for full wave simulations. Recent works have introduced segmentation approaches that are able to predict coupling to complex printed circuit board designs by using pre-rendered segments and cascading these segments through a circuit solver approach. The extended S-parameter models used by the segmentation approach currently do not include …

Go to article

Usb 3.0 Ibis-Ami Model Construction Using Measurement And Neural Network, Jiahuan Huang, Wenchang Huang, Muqi Ouyang, Hank Lin, Bin Chyi Tseng, Chulsoon Hwang Jan 2025

Usb 3.0 Ibis-Ami Model Construction Using Measurement And Neural Network, Jiahuan Huang, Wenchang Huang, Muqi Ouyang, Hank Lin, Bin Chyi Tseng, Chulsoon Hwang

Electrical and Computer Engineering Faculty Research & Creative Works

The input/ output modes are essential for high-speed signal integrity analysis and channel simulation. This work aims to develop a method for generating an IBIS-AMI model for USB 3.0 using measurement data. Instead of requiring a specially designed motherboard with test points for specific measurements, this method uses measurement data obtained from an assembled motherboard. The only available data for measurement in this case is the output voltage waveform from the USB 3.0 port on the motherboard. To address this, a novel approach is proposed to extract all the required parameters for the IBIS-AMI model from a single available measurement …

Go to article

Mitigating Optical Module Emi Using Common- And Differential-Mode Filters, Shivali Singh, Rakshith Kumar Gopalaiah, Di Li, Mokshit Tejasvi, Shipra Shipra, Victor Khilkevich Jan 2025

Mitigating Optical Module Emi Using Common- And Differential-Mode Filters, Shivali Singh, Rakshith Kumar Gopalaiah, Di Li, Mokshit Tejasvi, Shipra Shipra, Victor Khilkevich

Electrical and Computer Engineering Faculty Research & Creative Works

A strategy to mitigate electromagnetic interference in quad/octal small form-factor pluggable interfaces using a common-mode/differential-mode filter is presented in this research. Differential source imbalance produces significant common- and differential-mode noise in the differential pseudorandom binary sequence signal. EMI associated with this noise can be reduced by incorporating a band stop filter onto the differential line on a printed circuit board. Two kinds of filters were tested: common mode and common/differential mode. It was demonstrated that the application of a common-mode/differential-mode filter is more advantageous than a common-mode filter and allows to achieve the suppression of the total radiated power by …

Go to article

Radiated Susceptibility Testing Using Near-Field Scanning, Mckennan Starkey, Aaron Harmon, Cody Goins, Kristen Donnell, Victor Khilkevich, Daryl Beetner Jan 2025

Radiated Susceptibility Testing Using Near-Field Scanning, Mckennan Starkey, Aaron Harmon, Cody Goins, Kristen Donnell, Victor Khilkevich, Daryl Beetner

Electrical and Computer Engineering Faculty Research & Creative Works

Determining locations and components in a system responsible for radiated coupling is challenging. Methods, such as near field injection susceptibility scanning or direct power injection, can only find locations and frequencies where a component is sensitive to the near field or to an injected signal but cannot deduce if the component is well coupled to the far-field. In this paper, a method to experimentally determine the levels of radiated coupling within a target system is proposed. A near-field differential loop probe is scanned over the target device while measuring the radiated energy in a stirred-mode tent. By sweeping the near …

Go to article

Graph-Based Reinforcement Learning Approach For Multi-Power-Domain Pcb Pdn Shape And Stackup Synthesis, Haran Manoharan, Hanfeng Wang, Jingnan Pan, Yuchu He, Jianmin Zhang, Xu Gao, Chulsoon Hwang Jan 2025

Graph-Based Reinforcement Learning Approach For Multi-Power-Domain Pcb Pdn Shape And Stackup Synthesis, Haran Manoharan, Hanfeng Wang, Jingnan Pan, Yuchu He, Jianmin Zhang, Xu Gao, Chulsoon Hwang

Electrical and Computer Engineering Faculty Research & Creative Works

Efficient power plane and stack up optimization is critical for Printed Circuit Board (PCB) Power Delivery Networks (PDNs), particularly in multi-power-domain designs with stringent DC Resistance (DCR) specifications. This work presents a novel reinforcement learning-based framework that assigns stack up layers for each power domain and iteratively refines power plane shapes to meet design constraints while ensuring non-overlapping layouts. The approach leverages Minimum Spanning Trees (MSTs) for initializing power plane shapes. It dynamically refines them using the A∗ (A-Star) algorithm with weighted pathfinding, ensuring optimal connectivity and compliance with DCR requirements. Tested extensively on multi-power-domain scenarios, the algorithm demonstrates robust …

Go to article

Optimized Modeling Of Pcb Vias With Nonfunctional Pads And High-Frequency Behavior Up To 150 Ghz, Mehdi Mousavi, Kevin Cai, Chaofeng Li, Sathvika Bandi, Manish Mathew, Mehdi Khaleghi, Shameem Ahmed, Donghyun Kim Jan 2025

Optimized Modeling Of Pcb Vias With Nonfunctional Pads And High-Frequency Behavior Up To 150 Ghz, Mehdi Mousavi, Kevin Cai, Chaofeng Li, Sathvika Bandi, Manish Mathew, Mehdi Khaleghi, Shameem Ahmed, Donghyun Kim

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents an enhanced closed-form approach for modeling and optimizing high-frequency PCB vias, implemented in Python and validated against industry standard tools such as ADS and HFSS. The model incorporates resistance alongside inductance and capacitance to capture frequency-dependent losses and integrates non-functional pads (NFPs), demonstrating significant improvements in signal integrity by reducing reflections and enhancing return loss, particularly at 100 GHz. The methodology extends the frequency range of previous models from 100 GHz to 150 GHz, ensuring compatibility with next-generation standards like PCIe Gen 6. Validation results show insertion loss deviations under 3 dB and consistent return loss across …

Go to article

Ai-Driven Traffic Scene Understanding Using Static Lidar Sensors, Elham Binshaflout, Chaima Zaghouani, Charalampos Antoniadis, Hakim Ghazzai, Nawfal Guefrachi, Ahmad Alsharoa, Sameh Najeh, Gianluca Setti Jan 2025

Ai-Driven Traffic Scene Understanding Using Static Lidar Sensors, Elham Binshaflout, Chaima Zaghouani, Charalampos Antoniadis, Hakim Ghazzai, Nawfal Guefrachi, Ahmad Alsharoa, Sameh Najeh, Gianluca Setti

Electrical and Computer Engineering Faculty Research & Creative Works

Traffic congestion and road safety remain critical challenges in urban environments, driving the need for more effective traffic monitoring solutions. While recent advancements in computer vision have enhanced traffic perception, the dynamic viewpoint of autonomous vehicles is often insufficient for comprehensive traffic management. To address this gap, we propose an AI-driven framework for enhanced traffic scene understanding using static LiDAR sensors at road intersections. The system collects 3D point clouds from roadside static LiDAR sensors, providing a complete view of vehicles and pedestrians. We integrate state-of-the-art 3D object detection (i.e., PV-RCNN) and instance segmentation models (i.e., PointGroup3heads) to accurately identify …

Go to article

Efficient Decoupling Capacitor Impact Calculation, Faye Squires, Yifan Ding, Matthew Doyle, Matteo Cocchini, Samuel Connor, Francesco De Paulis, Albert E. Ruehli, Chulsoon Hwang, Lijun Jiang Jan 2025

Efficient Decoupling Capacitor Impact Calculation, Faye Squires, Yifan Ding, Matthew Doyle, Matteo Cocchini, Samuel Connor, Francesco De Paulis, Albert E. Ruehli, Chulsoon Hwang, Lijun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

Methods of optimizing decoupling capacitor placement on power distribution networks (PDNs) are often limited due to the computational complexity required to calculate the impact of connecting loads to an impedance matrix with hundreds of rows and columns. This work proposes that by removing all but one member of the impedance matrix before calculating, checking the impact of adding capacitors to the matrix can be done efficiently, and optimization methods can be viable even when requiring millions of impedance calculations.

Go to article

Obstacles And Mitigations For An Accurate Low Impedance, Low Frequency Measurement, Faye Squires, Yifan Ding, Matthew Doyle, Matteo Cocchini, Samuel Connor, Francesco De Paulis, Albert E. Ruehli, Chulsoon Hwang, Lijun Jiang Jan 2025

Obstacles And Mitigations For An Accurate Low Impedance, Low Frequency Measurement, Faye Squires, Yifan Ding, Matthew Doyle, Matteo Cocchini, Samuel Connor, Francesco De Paulis, Albert E. Ruehli, Chulsoon Hwang, Lijun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

The two-port shunt configuration is often heralded as the gold standard for low-impedance measurements. However, this measurement method is not without its own issues. The shunt configuration inherently creates a ground loop between the measurement device's reference plane and the reference of the device under test (DUT). Additionally, probes often must be oriented in such a way that allows inductive coupling to occur. This work uses microprobes to measure the shunt impedance of a non-ideal short to explore the limitations of this measurement method in terms of both frequency and impedance. It highlights the importance of ground loop isolation and …

Go to article

Data Representation And Preprocessing Effects On S-Parameter Modeling Of High-Speed Channels Using Machine Learning, Hyunwook Park, Davit Kharshiladze, Yifan Ding, Ling Zhang, Natalia Bondarenko, Hanqin Ye, Kaushal Sanjay Mhalgi, Brice Achkir, Chulsoon Hwang Jan 2025

Data Representation And Preprocessing Effects On S-Parameter Modeling Of High-Speed Channels Using Machine Learning, Hyunwook Park, Davit Kharshiladze, Yifan Ding, Ling Zhang, Natalia Bondarenko, Hanqin Ye, Kaushal Sanjay Mhalgi, Brice Achkir, Chulsoon Hwang

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, the effects of data representations and preprocessing on machine learning based S-parameter modeling of high-speed channels are investigated. Using a transformer network as a base model, two S-parameter representations in real/imaginary and magnitude/phase are compared and studied. Considering S-parameter data distributions, various preprocessing techniques including MinMax normalization, standardization, robust scaling, power transformation, and quantile transformation are compared and analyzed to improve accuracy. Moreover, the accuracy results are compared depending on the electrical length of target channels.

Go to article

Multi-Objective Inverse Optimization Of High-Speed Interconnects Using Cascaded Deep Neural Network, Yicheng Zhang, Ling Zhang, Hyunwook Park, Bo Pu, Xiao Ding Cai, Chulsoon Hwang, Bidyut Sen, Jun Fan, Er Ping Li, James L. Drewniak Jan 2025

Multi-Objective Inverse Optimization Of High-Speed Interconnects Using Cascaded Deep Neural Network, Yicheng Zhang, Ling Zhang, Hyunwook Park, Bo Pu, Xiao Ding Cai, Chulsoon Hwang, Bidyut Sen, Jun Fan, Er Ping Li, James L. Drewniak

Electrical and Computer Engineering Faculty Research & Creative Works

This paper proposes a novel multi-objective inverse optimization method for high-speed interconnects based on a cascaded deep neural network (DNN) structure, which can efficiently optimize characteristic impedance, insertion loss, and far-end crosstalk (FEXT) simultaneously. Parameter optimization for high-speed interconnects is essential to the signal integrity and electrical performance of complex designs such as multilayer printed circuit boards (PCBs) and chiplets. Conventional optimization approaches often rely on numerous optimization iterations, which is highly time-consuming, especially in high dimensional parameter spaces. This paper proposes a novel DNN based method by cascading an inverse-prediction network and a forward-prediction network to achieve multi-objective optimization …

Go to article

Differential Via Modeling Using Multilayer Perceptron-Sequential (Mlp-Seq) Neural Network, Hyunwook Park, Shruti Sawant, Bandi Sathvika, Arun Chada, Soumya Singh, Seema Pk, Taein Shin, Haeseok Suh, Junyong Park, Bhyrav Mutnury, Donghyun Kim Jan 2025

Differential Via Modeling Using Multilayer Perceptron-Sequential (Mlp-Seq) Neural Network, Hyunwook Park, Shruti Sawant, Bandi Sathvika, Arun Chada, Soumya Singh, Seema Pk, Taein Shin, Haeseok Suh, Junyong Park, Bhyrav Mutnury, Donghyun Kim

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, an encoder-decoder structured multi-layer perceptron-sequential (MLP-SEQ) networks are proposed to model high-speed differential vias for estimating differential insertion loss (IL) and return loss (RL). Sequential neural networks including recurrent neural network (RNN), long short-term memory (LSTM), and gated recurrent unit (GRU) are introduced as the decoder NN to treat frequency responses as sequences. The proposed models are validated by finite element method (FEM) simulation results. The accuracy and training times of MLP-RNN, MLP-LSTM, and MLP-GRU models are compared and analyzed. Based on the MLP-LSTM model, various design of experiments (DoEs) are conducted to enhance the reproducibility and …

Go to article

Coupling Path Analysis Of Data Center Ssd Storage Systems Based On Visualization Technique, Xiangrui Su, Haran Manoharan, Jihun Kim, Lalit Kumar, Heewon Kang, Chunghyun Ryu, Chulsoon Hwang Jan 2025

Coupling Path Analysis Of Data Center Ssd Storage Systems Based On Visualization Technique, Xiangrui Su, Haran Manoharan, Jihun Kim, Lalit Kumar, Heewon Kang, Chunghyun Ryu, Chulsoon Hwang

Electrical and Computer Engineering Faculty Research & Creative Works

Electrostatic discharge (ESD) is a major source of electromagnetic interference, capable of causing damage, malfunctions, or disruptions in electronic devices. As a result, ESD immunity testing is a critical component of electromagnetic compatibility (EMC) standards. In this study, the radiation emitted from the ESD gun body over 2 GHz is characterized and modeled using Huygens' principle. The equivalent field source was validated across three different environments, demonstrating accuracy with errors of less than 10 dB. A coupling path visualization technique was then employed to identify critical coupling paths, providing guidance for the strategic placement of absorbers. Simulation results showed that …

Go to article

Design Strategies For Skew Compensation In Highspeed Pcb Strip Line Interconnects, Sathvika Bandi, Reza Asadi, Zhekun Peng, Srinivas Venkataraman, Granthana Rangaswamy, Santosh Pappu, Xu Wang, Donghyun Kim Jan 2025

Design Strategies For Skew Compensation In Highspeed Pcb Strip Line Interconnects, Sathvika Bandi, Reza Asadi, Zhekun Peng, Srinivas Venkataraman, Granthana Rangaswamy, Santosh Pappu, Xu Wang, Donghyun Kim

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents a comprehensive analysis of the impact of intra-pair PN skew compensation in printed circuit board (PCB) strip line (SL) traces, for a high-speed 224 Gbps lane for the first time. The study investigates the effects of skew compensation placement both with and without via discontinuities. Detailed evaluations are performed in both time and frequency domains, examining critical parameters such as time-domain reflectometry (TDR), input impedance, return loss, insertion loss, and common-mode S -parameters. The findings reveal that, in a simple strip line trace without via discontinuities, the location of skew compensation has negligible influence on signal margins. …

Go to article

Enhanced Continual Reinforcement Learning-Based Output Feedback Control Of Heterogeneous Quadrotors Formation, Ehsan Soleimani, S. Jagannathan Jan 2025

Enhanced Continual Reinforcement Learning-Based Output Feedback Control Of Heterogeneous Quadrotors Formation, Ehsan Soleimani, S. Jagannathan

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents a unified framework for the safe and optimal control of heterogeneous quadrotor unmanned aerial vehicles (QUAVs) in formation, enabling multitask missions without requiring precise system dynamics. To address partial state observability, a multilayer neural network (MNN) observer is designed to estimate unmeasured states. Reinforcement learning (RL) is employed for optimal control utilizing an MNN ensuring adaptability. Barrier Lyapunov Functions (BLFs) are integrated into the RL framework to enforce safety by maintaining QUAVs within predefined constraints. An enhanced continual learning (ECL) method is proposed to improve the adaptability of MNNs. This method enables effective multitask learning while mitigating …

Go to article

Modeling Of Slot-Backed Microstrip Line For Emi Applications, Jongsuk Hyun, Wenchang Huang, Chulsoon Hwang Jan 2025

Modeling Of Slot-Backed Microstrip Line For Emi Applications, Jongsuk Hyun, Wenchang Huang, Chulsoon Hwang

Electrical and Computer Engineering Faculty Research & Creative Works

Radiated emissions from the noise-generating components in modern electronic devices are a significant concern for both electromagnetic interference and RF interference. Shielding cans are commonly used to suppress emissions from noise sources, but accurate shielding effectiveness evaluation requires a clean, well-defined radiation source that can reliably mimic real emissions for repeatable measurements. Slot-backed microstrip antennas provide a practical alternative to loop antennas, offering zero height, low parasitic radiation, and seamless printed circuit board integration. This article proposes an analytical model for estimating the magnetic dipole moment of slot-backed microstrip structures. The model captures both the discontinuity effects and radiated characteristics …

Go to article

Spatially Distributed Optical Fiber Sensing With Weak Fiber Bragg Grating Arrays Based On Microwave Photonics, Wassana Naku, Osamah Alsalman, Chen Zhu Jan 2025

Spatially Distributed Optical Fiber Sensing With Weak Fiber Bragg Grating Arrays Based On Microwave Photonics, Wassana Naku, Osamah Alsalman, Chen Zhu

Electrical and Computer Engineering Faculty Research & Creative Works

Fiber Bragg gratings (FBGs) have been one of the most widely used optical fiber sensors in both scientific and industrial applications due to their unique advantages of high sensitivity, ease of signal transduction, and capabilities for remote operation and multiplexing. However, the majority of sensing systems based on FBGs can only achieve quasi-distributed sensing along the fiber under test, leaving dark zones in between discrete FBG elements. In this work, we propose and demonstrate a microwave photonics enabled approach for the interrogation of cascaded FBGs to achieve spatially distributed sensing. The core of the system includes an incoherent optical frequency-domain …

Go to article

Characterization And Full-Wave Modeling Of Corona Discharge Induced Coupling To Touchscreen Displays, Zhekun Peng, Shubhankar Marathe, Javad Meiguni, Ali Foudazi, Jianchi Zhou, Li Shen, Viswa Pilla, Cheung Wei Lam, Donghyun Kim, David Pommerenke, Daryl G. Beetner Jan 2025

Characterization And Full-Wave Modeling Of Corona Discharge Induced Coupling To Touchscreen Displays, Zhekun Peng, Shubhankar Marathe, Javad Meiguni, Ali Foudazi, Jianchi Zhou, Li Shen, Viswa Pilla, Cheung Wei Lam, Donghyun Kim, David Pommerenke, Daryl G. Beetner

Electrical and Computer Engineering Faculty Research & Creative Works

An electrostatic discharge (ESD) to the glass of a touchscreen display can damage capacitive touch sensor circuitry and traces. The ESD creates a sparkless corona discharge on the glass surface, which couples to sense patches on the other side of the glass. Currents induced on sense traces during the corona discharge are measured in an evaluation setup, which resembles the touchscreen design. Waveforms for current induced at different distances from the discharge position are recorded and compared. The induced currents are analyzed by their peak value and the total charge or energy delivered to the sense trace for different discharge …

Go to article

Topology And Parameter Joint Identification In Imbalanced Low-Voltage Distribution Networks Based On Load Characteristic Propagation, Yanan Zhang, Gan Zhou, Huan Mao, Wei Gu, Yanjun Feng, Rui Bo Jan 2025

Topology And Parameter Joint Identification In Imbalanced Low-Voltage Distribution Networks Based On Load Characteristic Propagation, Yanan Zhang, Gan Zhou, Huan Mao, Wei Gu, Yanjun Feng, Rui Bo

Electrical and Computer Engineering Faculty Research & Creative Works

Low-voltage distribution networks often suffer from incomplete or outdated network records, making it challenging to obtain the topology and line parameters under actual operating conditions. To address this issue, a joint identification method is proposed based on the propagation of load transient characteristics. First, the principle of load characteristic propagation is elaborated, and the concept of coupling impedance is introduced. Second, a set of linear regression equations is established based on the changes in current and voltage of the terminal measurements before and after load switching, and then these equations are solved using the least squares method to form the …

Go to article

Structural Analysis Of Multi-Domain Dynamic Systems Modeled Via Bond Graphs, Arnold A. Fernandes, Jonathan W. Kimball Jan 2025

Structural Analysis Of Multi-Domain Dynamic Systems Modeled Via Bond Graphs, Arnold A. Fernandes, Jonathan W. Kimball

Electrical and Computer Engineering Faculty Research & Creative Works

Structural Observability (SO) and Structural Monitorability (SM) are structural properties utilized to determine the state and fault-free operation of components, respectively, in a bond graph (BG) model. BGs enable qualitative system analysis, evaluating whether existing sets of sensors and actuators ensure Structural Observability (SO) and Structural Controllability (SC) without knowledge of parametric values. Furthermore, the analysis determines whether there are sufficient sensors available to identify component faults accurately. This work provides a framework for automated sensor placement in a multi-domain physical system while analyzing the SO and SM properties. The MATLAB Structural Analysis Toolbox (MATSAT) conducts sensor placement in a …

Go to article

Centralized And Federated Heart Disease Classification Using Uci Dataset: A Benchmark With Interpretability Analysis, Mario Padilla Rodriguez, Eyiara Oladipo, Mohamed Nafea Jan 2025

Centralized And Federated Heart Disease Classification Using Uci Dataset: A Benchmark With Interpretability Analysis, Mario Padilla Rodriguez, Eyiara Oladipo, Mohamed Nafea

Electrical and Computer Engineering Faculty Research & Creative Works

Cardiovascular disease (CVD) is a leading cause of global mortality, highlighting the need for accurate diagnostic methods. This study benchmarks centralized and federated learning (FL) algorithms for heart disease binary classification using the UCI dataset, which includes 920 patient records from four hospitals in the USA, Hungary, and Switzerland. Our benchmark is supported by Shapley-value as well as Local Interpretable Model-agnostic Explanations (LIME) interpretability analyses to quantify feature importance for classification. In the centralized setup, various classification algorithms are trained on pooled data, with the Naive Bayes classifier achieving the highest test accuracy of 81.1%. Further, FL algorithms with four …

Go to article

Benchmarking Deep Learning Architectures For Ecg-Based Multi-Label Heart Disease Prediction Using Mimic-Iv Database, Eyiara Oladipo, Sarwar Nazrul, Mohamed Nafea Jan 2025

Benchmarking Deep Learning Architectures For Ecg-Based Multi-Label Heart Disease Prediction Using Mimic-Iv Database, Eyiara Oladipo, Sarwar Nazrul, Mohamed Nafea

Electrical and Computer Engineering Faculty Research & Creative Works

Cardiovascular disease (CVD) is a leading cause of global mortality, accounting for an estimated 17.9 million deaths annually. CVD is broadly defined as a group of medical conditions influenced by modifiable or non-modifiable risk factors that affect the heart's ability to function properly. Machine learning (ML) has emerged as a powerful tool for analyzing complex medical data, aiding in early detection and accurate diagnosis of CVD and improving patient outcomes. Recent studies proposed various deep learning (DL) architectures for detecting CVD, yet there is a lack of robust benchmarks for comparing their performance on large-scale databases. In this work, we …

Go to article

Honey-Reram Enabled Sustainable Edge Ai System For Iot Applications, Jinhui Wang, Feng Zhao, Mohammad Rafeeq Khan, Md Mehedi Hasan Tanim, Zoe Templin, Harshvardhan Uppaluru Jan 2025

Honey-Reram Enabled Sustainable Edge Ai System For Iot Applications, Jinhui Wang, Feng Zhao, Mohammad Rafeeq Khan, Md Mehedi Hasan Tanim, Zoe Templin, Harshvardhan Uppaluru

Electrical and Computer Engineering Faculty Research & Creative Works

This paper is toward a promising solution to address the environmental sustainability challenge in computing by building brain-inspired and green non-Von Neumann systems with Resistive Random-Access Memory (ReRAM) made from natural organic materials, honey, for energy-efficient operation, renewable material resources, sustainable device manufacturing, and environmentally-friendly disposal. In this paper, honey-ReRAM and its arrays are firstly manufactured and tested. The resistance modulation mechanism of honey-ReRAM is analyzed and investigated. Then a Computing-in-Memory (CIM) architecture based on honey-ReRAM for edge AI and IoT applications is proposed and evaluated. The experimental results indicate that the proposed edge AI systems with the VGG8 and …

Go to article

Ethics Vs.. Regulation: Converging Frameworks For Trustworthy Human-Centered Ai In Biomedical Research, Tayo Obafemi-Ajayi, Tiffani J. Bright, Emily F. Wong, Donald Wunsch, Joan Peckham, Jason H. Moore Jan 2025

Ethics Vs.. Regulation: Converging Frameworks For Trustworthy Human-Centered Ai In Biomedical Research, Tayo Obafemi-Ajayi, Tiffani J. Bright, Emily F. Wong, Donald Wunsch, Joan Peckham, Jason H. Moore

Electrical and Computer Engineering Faculty Research & Creative Works

The accelerating impact of AI in biomedical research is driving significant advances in precision medicine. As these systems increasingly shape health outcomes, the imperative to develop trustworthy, reliable, and ethically grounded AI becomes more pressing, particularly in addressing concerns related to data integrity, patient safety, and equitable outcomes. While the potential of AI to transform biomedical research is clear, its responsible integration depends on more than technological capability. Ensuring that these systems are aligned with societal values requires a dual commitment: the operationalization of ethical principles throughout the AI life cycle and the establishment of robust regulatory mechanisms. Ethics provides …

Go to article

Corona Discharge To Touchscreen Modeling Using Nonlinear Time-Dependent Corona Streamer Propagation Model In Spice, Zhekun Peng, Daniel Szanto, Jianchi Zhou, Darryl Kostka, David Pommerenke, Daryl G. Beetner Jan 2025

Corona Discharge To Touchscreen Modeling Using Nonlinear Time-Dependent Corona Streamer Propagation Model In Spice, Zhekun Peng, Daniel Szanto, Jianchi Zhou, Darryl Kostka, David Pommerenke, Daryl G. Beetner

Electrical and Computer Engineering Faculty Research & Creative Works

SPICE-based methods for predicting coupling from an ESD-induced corona streamer to printed-circuit board (PCB) structures beneath a touchscreen display are evaluated in this paper. Results demonstrate that the non-linear time-dependent propagation model can capture the coupling much better than other models and accurately predict the overall current waveform.

Go to article

Mapping Biomedical Ontology Terms To Ids: Effect Of Domain Prevalence On Prediction Accuracy, Thanh Son Do, Daniel B. Hier, Tayo Obafemi-Ajayi Jan 2025

Mapping Biomedical Ontology Terms To Ids: Effect Of Domain Prevalence On Prediction Accuracy, Thanh Son Do, Daniel B. Hier, Tayo Obafemi-Ajayi

Electrical and Computer Engineering Faculty Research & Creative Works

This study evaluates the ability of large language models (LLMs) to map biomedical ontology terms to their corresponding ontology IDs across the Human Phenotype Ontology (HPO), Gene Ontology (GO), and UniProtKB terminologies. Using counts of ontology IDs in the PubMed Central (PMC) dataset as a surrogate for their prevalence in the biomedical literature, we examined the relationship between ontology ID prevalence and mapping accuracy. Results indicate that ontology ID prevalence strongly predicts accurate mapping of HPO terms to HPO IDs, GO terms to GO IDs, and protein names to UniProtKB accession numbers. Higher prevalence of ontology IDs in the biomedical …

Go to article

First Prev Next Last