Digital Commons Network^™

Parenting Pre-Teens During Covid-19 In A Rural Midwestern Community: An Interpretive Phenomenological Study, Sarah Oerther, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

To uncover the experiences of parenting Generation Z pre-teen children in rural communities impacted by the Stay Home Missouri order from April through May 2020. Researchers have focused on urban parents, leading to gaps in understanding the impact of the COVID-19 quarantine on rural parents and children. A qualitative study employing interpretive phenomenology. 14 white cis-male-sexed fathers and cis-female-sexed mothers living in midwestern rural communities participated in this study. Semi-structured interviews with 14 participants parenting pre-teen children were conducted. The interviews were analyzed using interpretive phenomenology. The COREQ checklist was followed. One theme that emerged from the narratives was the …

Optimizing Exterior Lighting Illuminance And Spectrum For Human, Environmental, And Economic Factors., S. M. Simmons, Stuart Werner Baur, William L. Gillis, Devin Michael Burns, Heath Pickerill

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

With the recent widespread adoption of LED lighting in outdoor areas, numerous concerns have been raised about the potential for harmful effects on humans, animals, plants, and the night sky. These stem from the high blue light content of some LED bulbs and an incentive to increase lighting levels caused by higher efficiency and lower costs. While new lighting installations are often described as environmentally friendly due to their energy efficiency, factors such as light pollution are often neglected or not given enough weight. This research focuses on optimizing the design of exterior lighting for human, environmental, and economic factors …

Fan-Shaped Model For Generating The Anisotropic Catchment Area Of Subway Stations Based On Feeder Taxi Trips, Shiwei Liu, Yajuan Deng, Xianbiao Hu, Jiaxing Zhou, Jianming Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The catchment areas of subway stations have always been considered as a circular shape in previous research. Although some studies show the catchment area may be affected by road conditions, public transportation, land use, and other factors, few studies have discussed the shape of the catchment area. This study focuses on analyzing the anisotropy of catchment areas and developing a sound methodology to generate them. Based on taxi global positioning system (GPS) data, this paper first proposes a data mining method to identify feeder taxi trips around subway stations. Then, a fan-shaped model is proposed and applied to Xi'an Metro …

Bcmnet: Cross-Layer Extraction Structure And Multiscale Downsampling Network With Bidirectional Transpose Fpn For Fast Detection Of Wildfire Smoke, Jiayong Li, Guoxiong Zhou, Aibin Chen, Chao Lu, Liujun Li

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

At present, the wildfire smoke detection algorithm based on YOLOv3 has problems, such as low accuracy and slow detection speed. In this article, we propose a cross-layer extraction structure and multiscale downsampling network with bidirectional transpose FPN (BCMNet) for fast detection of wildfire smoke. First, a cross-layer extraction module, which combines linear feature multiplexing and receptive field amplification, is designed. It can improve the speed and accuracy of wildfire smoke detection. Second, a multiscale downsampling module with different convolution kernels and maximum pooling operation is designed to preserve the details of the image while downsampling. Then, a bidirectional transposed FPN …

Two Buried And Stacked Ice Masses Dated To Early And Late Pliocene; Ong Valley, Antarctica, Marie Bergelin

Theses and Dissertations

A debris rich ice core was collected from a buried ice mass in Ong Valley, located in Transantarctic Mountains in Antarctica. Measured cosmogenic nuclide concentrations in quartz obtained from the ice core were used to determine the age of the buried ice mass and infer the processes responsible for the emplacement of the debris currently overlaying the ice. Such ice masses are valuable archives of paleoclimate proxies; however, the preservation of ice beyond 800 kyrs is rare and therefore much effort has been recently focused on finding ice that is older than 1 Ma. In Ong Valley, the large, buried …

Analysis Of Safety Event Reporting Behaviors And Attitudes Amongst Uscg Aviators, Kevan Patrick Hanson

Theses and Dissertations

Safety event reporting is an essential component of Safety Management Systems (SMS) that helps organizations identify and address hazards. USCG aviation has a robust safety reporting process, however subject matter expert review and academic studies suggest that underreporting occurs in the USCG and in similar organizations, and that certain barriers to reporting may exist. A survey was designed and distributed to active duty USCG aviators (151 valid responses received) to identify historical reporting behaviors, attitudes towards pre-identified barriers, qualitative perceptions of reporting barriers, and attitudes towards potential new reporting policy and processes. Statistical analysis of the results found that lack …

Dccam-Mrnet: Mixed Residual Connection Network With Dilated Convolution And Coordinate Attention Mechanism For Tomato Disease Identification, Yujian Liu, Yaowen Hu, Weiwei Cai, Guoxiong Zhou, Jialei Zhan, Liujun Li

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Tomato is an important and fragile crop. During the course of its development, it is frequently contaminated with bacteria or viruses. Tomato leaf diseases may be detected quickly and accurately, resulting in increased productivity and quality. Because of the intricate development environment of tomatoes and their inconspicuous disease spot features and small spot area, present machine vision approaches fail to reliably recognize tomato leaves. As a result, this research proposes a novel paradigm for detecting tomato leaf disease. The INLM (integration nonlocal means) filtering algorithm, for example, decreases the interference of surrounding noise on the features. Then, utilizing ResNeXt50 as …

Application Of Sla 3d Printing For Polymers, Taylor Wilson

Williams Honors College, Honors Research Projects

Stereolithography is a type of 3D printing that allows liquid photopolymer resin to be cured into layers that make up a 3D object. Creation of such resins for these purposes can require a significant amount of time to test and develop, and commercial resins also require some amount of testing for printer settings before use. This paper reviews how stereolithography works, the materials used, and experimentation done to compare the resin properties to the determined curing times. Using several commercially available resins, varying base exposure and layer exposure times were used to determine the lowest possible curing time that gave …

Emergency Water Treatment Methods Through The Adaptation Of Natural Disaster Building Debris, Benjamin Colston

Williams Honors College, Honors Research Projects

The primary objective of this research was to determine whether concrete slag acquired from building debris in a disaster can be utilized to remove pathogens biochemically through changes in pH or physically through filtration. Direct Plate Enumeration testing was completed for different water samples to compare the general activity of bacterial growth as an indication of pathogenic potential. Throughout each experiment, the pH of different water samples was monitored and consistently indicated that water samples in contact with concrete pieces (concrete water samples) would exhibit a higher pH than samples with no exposure to concrete (control water samples). Compared to …

Schaeffler E-Motor, Jenne Harasin, Zachary Zatta, Christopher Tvaroch

Williams Honors College, Honors Research Projects

This project will be focusing on the work accomplished at Schaeffler to convert an existing internal combustion engine, Ford F-250 truck, into a battery electric vehicle. This report focuses on the vehicle's integration with an emphasis on the bearing design, e-Axle housing's method for mounting, bus bar design, resolver design, differential options, wiring for low and high voltage, and oil pump and cooling system for e-Beam. The bearings for the differential as well as the power transmission system from the electric motor to the e-Axle will need to be specified. By late summer 2022, Schaeffler will have a working prototype …

Grinding And Super-Finishing Test Machine Project, Michael Simon

Williams Honors College, Honors Research Projects

A research project in The University of Akron to study grinding and super-finishing of silicon nitride ceramic was initiated by Dr. Siamak Farhad and sponsored by the Timken Company, with the assistance of undergraduate students Michael Simon, Ryan Hosso and Mathew Rozmajzl. The study required analysis of forces and scratches generated during grinding processes of silicon nitride samples. A testing assembly was designed and constructed to record the forces generated during grinding and super-finishing of silicon nitride samples in a computer-numerical-control machine. Silicon nitride samples were subjected to desired grinding and super-finishing operations and all forces generated during the process …

Zips Racing Electric Battery Management System, John R. Martaus, Elena Falcione, Derek Dunn, Elliott Boudreau

Williams Honors College, Honors Research Projects

Zips Racing Electric currently uses a bulky, off-the-shelf battery management system to monitor and manage the voltage, temperature, and state-of-charge of an electric formula-style racecar battery pack (accumulator). The objective of this project is to research current battery management methodologies and apply said research to design and create a lightweight, compact, custom battery management system that is integrated with existing vehicle systems. This will allow for cleaner accumulator packaging and improved communication between the battery management system and the rest of the vehicle.

Human Powered Vehicle Team Challenge, Sydney Nedlik, Spencer Brodie, Maria Griffin, William Schell, Ryan Serraglio

Williams Honors College, Honors Research Projects

Design and build a Human Powered Vehicle in a team of five. Compete at the ASME HPVC competition in March of 2022. Re-establish the Human Powered Vehicle Team at the University of Akron.

Design Project: 3d Printer/Injection Molder Hybrid, Lee Paolucci, Luke Everhart, Brandon Leap, Karson Lorey

Williams Honors College, Honors Research Projects

In the realm of rapid, small-scale prototyping, there are a few main factors that drive decisions to invest resources in technology to make that prototyping possible. Cost and ease of use are two of the most influential when looking at most SMEs (Small to Medium-sized Enterprises). The U.S. Small Business Administration defines an SME as smaller than 1,250 employees. According to An Assessment of Implementation of Entry-Level 3D Printers from the Perspective of Small Businesses, 59% of small manufacturers had implemented 3D printers as of 2014. However, no matter what technology is used in rapid prototyping, there are common …

Advising Goodwill Industries Of Akron For Investment In A Digital Skills Training Service, Brady Dearth, Brandon Welsh, Annamarie Nedejkovic, Zoe Williams, Dayjon Harris

Williams Honors College, Honors Research Projects

n/a

Autonomous Payload Design With Systems Engineering, Michael Downs, Christopher James Liebhart 2nd

Williams Honors College, Honors Research Projects

The design will be an autonomous payload consisting of auto deployment of a drone running an autonomous mission of mapping the terrain around a grounded rocket. The project is part of the Akronauts payload project for the 2022 Spaceport competition. It will include the development of a ground station for monitoring and controlling the drone and the transfer of live data to the station and a computer on board the rocket. The project will aim to use system engineering techniques to accomplish this in the hope of providing documentation and thus insight into the best way to develop a multi-disciplinary …

Analysis Of Minor League Rule Changes Effect On Stolen Bases, Zachary Houghtaling

Williams Honors College, Honors Research Projects

This study uses various statistical analyses to evaluate the justification of rule changes for Major League Baseball that were implemented within the Minor Leagues during the 2021 minor league season. The primary focus of the study is predicting how some of these Minor League rule changes could affect the stolen base success rate and the number of attempts per game within the Major Leagues. A survey was conducted to evaluate how fans feel about stolen bases within the current game and if rules should be altered to increase the number of stolen bases that occur. Additionally, recorded Major and Minor …

Schlieren Imaging Of A Supersonic Wind Tunnel, Caleb Townsend, Tayler S. Powell

Williams Honors College, Honors Research Projects

This project exemplifies Schlieren Imaging on a Supersonic Wind Tunnel. Schlieren Imaging allows one to visualize fluid flow by refracting light through a fluid. The Schlieren Imaging system denoted in this paper is used to visualize the shock waves of air onto a test section within a supersonic wind tunnel. This is done by directing a beam of light through a test section and then focusing the light onto a blade edge. This blade edge then breaks up the light beam so that the refractions, created by the pressure differences, are blocked by the knife edge which allows the pressure …

Liquid Engine External Pressurizer (Leep), Emily Armbrust

Williams Honors College, Honors Research Projects

The purpose of this project is to take the current liquid rocket engine test stand design and implement an external pressurant instead of utilizing the 2-phase oxidizer vapor to pressurize itself and the fuel. The purpose behind the design is because the team is limited with the current design concerning burn time due to the amount of propellant they can put in the tanks and the pressure it can reach. The initial pressure is currently not held since there is no external input of mass into the tanks, as the propellant is leaving. Adding an external pressurant allow for the …

Functionalization Of Chitosan Based Microparticles For In Vitro 3d Culture Of Human Liver Cells, William Imes

Williams Honors College, Honors Research Projects

Previous work involving 3D culture of human liver cells with fluorinated chitosan based microparticles has shown that their incorporation provides needed structural cues that the culture of cells alone does not provide, such as increased gas transport. However, using bare microparticles to grow large 3D cellular structures is not practical as they tend to collapse before any meaningful research can be done on them. It is proposed that this is because of the lack of extracellular matrix (ECM)components within pure cell culture in vitro, which in their absence cannot adequately facilitate biochemical communication and adhesion between cells. It is …

Designing A Distillation Process For A Local Brewery, Julia Syme

Williams Honors College, Honors Research Projects

Proper distillation of spirits is key in maximizing resource value and producing a consumable liquid. A local brewery owner is considering entering the distilling market, and he requested information regarding a small-scale continuous column. This project used CHEMCAD to determine an operating design for continuous distillation of ethanol at a few different feed compositions. Since this model was limited to CHEMCAD, it had to build off of previous research and engineering parameters without an experimental verification. The project determined that an eight stage distillation column produced 40-58% ethanol product when the feed ranged from 7.5-12% ethanol. Eight stages produced even …

Multi-Platform Suppressor Design Project, Wyatt A. Openshaw, Alex B. Chiples

Williams Honors College, Honors Research Projects

The Multi-Platform suppressor is a design that is meant to bridge the gap in the suppressor market by being compatible and configurable with both rifle and pistol platform firearms. In the specific design and prototype referenced in this report, the Multi-Platform suppressor was designed to be used with 9mm pistol and 5.56x45mm rifle calibers with safety, effectiveness, and practicality in mind. To achieve this, the suppressor is configurable, utilizing a Nielsen device in the pistol configuration and a solid mount adapter that replaces the Nielson device piston and spring while in the rifle configuration. This allows the suppressor to retain …

Nject-3d, Kody Rinkevich, Logan Henderson, Nathaniel Anderson, James Patton, Cameron Wilson

Williams Honors College, Honors Research Projects

NJECT-3D is a student initiated design project where the utilities of a 3D printer and an injection molding machine are integrated into one cohesive unit. The goal of our project was to test the limits of rapid prototyping by utilizing printed molds. We developed an automated system where a mold can be printed on a 3D printer, translated from said 3D printer to an injection molder, then compressed and injected at said injection molder to output a finalized injection molded part.

Vehicle Maintenance Tracking Program, Jared Tomlinson

Williams Honors College, Honors Research Projects

In order to help consumers and businesses keep track of vehicle maintenance, I will create a program paired with a database that can track vehicle maintenance needs and when they should be performed. The program will be capable of tracking entire fleets of vehicles and based on the vehicle’s mileage, will notify users of what maintenance should be performed. Users will be able to add, remove, and edit vehicles in the system as needed and each vehicle will be paired with a maintenance schedule based on its needs. As maintenance is performed, it can be tracked on the schedule, which …

Ballistic Impact Mitigation Pad, Adam Pianalto, Nathan Mayer, Wyatt Smith, Nick Green, Douglas Wild

Williams Honors College, Honors Research Projects

In our senior design project we have decided to work under Dr. Jon Gerhardt on creating a gel pad to mitigate blunt force behind bulletproof vests. Extensive research on injury, materials, manufacturing methods, and NIJ standards was completed during this project. Through the use of advanced modeling software and additive manufacturing, we prototyped a functioning pad to test and compare to a pad that is currently available in today's market. The results proved to be very successful, but there are many areas to improve upon down the road.

Induction Brazing, Austin Squire, Scott Compton, Logan Hathaway, Michael Fleming

Williams Honors College, Honors Research Projects

Our team would like to research and explore ways of designing a portable device that uses induction heating/brazing to connect two exhaust pipes together.

Dupont Seal Mold Assembly Machine, Brett Biederman, Craig Hanchett, Matthew Chilton

Williams Honors College, Honors Research Projects

The Seal Assembly Machine is a custom-built device that is designed to seat a thin polymer part between two mating pieces of metal tooling. To meet the specifications of the sponsor, the Seal Assembly machine must perform its function more quickly and accurately than manual labor at the same task. At the time of compiling this report, the machine is not yet functional due to time constraints.

Co2 Based Parachute Deployment, Anthony M. S. Settlemier, Nicholas Motter

Williams Honors College, Honors Research Projects

This paper describes the design process of a CO2 based parachute deployment system for the Akronauts Rocket Design team, with particular emphasis on the selection of methodologies of deployment as well as design iteration. The objective was to create a fully mechanical system in order to replace the black powder based systems that were used previously by the team.

Emphasis was put in creating a system that would function well at higher altitudes while also preventing damage to the parachute during deployment. This system emphasizes robustness under launch conditions.

Biodegradation Of Rubber Particles In Soil: Using Acclimated Bacteria Isolated From Kansas Soil To Degrade Cryogrinds In Slurry, Shane Graham

Williams Honors College, Honors Research Projects

This study investigated the viability of bioremediating rubber cryogrind using enriched indigenous bacteria. To begin the experiment, soils from three highway roadside locations in Kansas, KS 96 and West, KS 400 and 143^rd, and 199^th, were collected and transported to the lab to be studied. An initial soil characterization was run on the soil samples using distilled (DI) water mixture and 0.01 M CaCl₂ to assess conductivity. The soils were tested to gather a baseline of the relationship between pH and conductivity and the impact of its distance from the roadside. Bacteria were isolated from …

Non-Destructive Characterization Of Bio-Cemented Soils Via Seismic Wave Measurement, Kyle Best

Williams Honors College, Honors Research Projects

The final outcome of this project is to examine the mechanical and resulting physical properties of bio-treated soil through microbial activity via non-destructive testing by seismic waves. The proposed bio-treatment strategy is through supplying specific nutrients for indigenous microbes within a soil specimen which in return produce calcium carbonates. The bio-minerals produced during these biogeochemical activities will improve the mechanical properties of soil by making cementation between soil grains. Additionally, a theoretical laboratory experimentational description will be provided to explain any associative effects on a specimen's water permeability or mechanical strength due to bio-mineralization within the samples. The characterization of …