Digital Commons Network^™

Analysis Of Outsourcing Data To The Cloud Using Autonomous Key Generation, Mortada Abdulwahed Aman

Masters Theses

"Cloud computing, a technology that enables users to store and manage their data at a low cost and high availability, has been emerging for the past few decades because of the many services it provides. One of the many services cloud computing provides to its users is data storage. The majority of the users of this service are still concerned to outsource their data due to the integrity and confidentiality issues, as well as performance and cost issues, that come along with it. These issues make it necessary to encrypt data prior to outsourcing it to the cloud. However, encrypting …

Multiple Security Domain Model Of A Vehicle In An Automated Vehicle System, Uday Ganesh Kanteti

Masters Theses

"This thesis focuses on the security of automated vehicle platoons. Specifically, it examines the vulnerabilities that occur via disruptions of the information flows among the different types of sensors, the communications network and the control unit in each vehicle of a platoon. Multiple security domain nondeducibility is employed to determine whether the system can detect attacks. The information flows among the various domains provide insights into the vulnerabilities that exist in the system by showing if an attacker’s actions cannot be deduced. If nondeducibility is found to be true, then an attacker can create an undetectable attack. Defeating nondeducibility requires …

Combination Of Bmp-2 And Relaxin To Induce Osteogenesis In Vivo, Sahitya Injamuri

Masters Theses

"Bone grafts are a common procedure for treating craniofacial injuries such as trauma, surgery, and reconstruction. Autografts and allografts have limitations which encourages the use of synthetic bone grafts. While synthetic bone grafts, such as hydroxyapatite (HA) microspheres, are advantageous for their cost and reproducibility, they lack the cells and growth factors needed for proper osteoinduction. Bone morphogenetic protein-2 (BMP-2) has been shown to increase the osteoinduction of grafts but the effective dose is above physiological levels and causes undesired effects on the body. Relaxin has been shown to enhance BMP-2's ability to induce bone formation in vitro and thus …

Cyber-Physical Manufacturing Cloud: An Efficient Method Of Building Digital Twin For 3d Printer By Adapting Mtconnect Protocol, Liwen Hu

Masters Theses

"The common modeling of a virtual machine is using an information model to describe the physics of machines. The integration of digital twins into productive cyber-physical cloud manufacturing (CPCM) systems imposes strict requirements such as reducing overhead and saving resources for the systems. In this paper, we investigate a new method for building cloud-based digital twins (CBDT), which can be adapted to the CPCM platform. Our method helps reduce computing resources in the processing center and guarantees the fastest speed of the interactions between the human users and physical machines. We introduce a knowledge resource center (KRC) built on a …

Bioaccessibility Of Lead From Lead-Contaminated Soil Upon Phosphate Amendment Using A Physiologically-Based Extraction Test, Samantha Jo Dicenso

Masters Theses

"Lead is known to cause health problems in humans, especially children, and an effective in‐situ remediation option has been sought for years. Adding phosphoric acid (PA) to contaminated soil causes a reaction that binds the lead to phosphate to produce pyromorphite (Pb₅(PO₄)₃Cl), a form of lead believed to be non‐bioavailable; however, field trials have given varied results (Bosso et al 2008; Munksgaard and Lottermoser 2011; Tang et al. 2009). One explanation for these results might be the impact of the agent used to raise pH after phosphoric acid addition. In order to examine this explanation soil was collected from the …

Characterizing Groundwater Flow At Fort Leonard Wood Using Universal Cokriging With Trend Removal, Rachel Mae Uetrecht

Masters Theses

"Groundwater elevation interpolation is necessary for the prediction of groundwater flow direction and contaminant transport. Kriging is a geostatistical tool commonly used to interpolate groundwater elevation. Kriging requires a relatively large number of monitoring wells at the site of interest. The variogram model is a crucial element to the kriging equations. The variogram modelling process is an iterative procedure that is often very time consuming. This study presents a literature based approach that provides a point of departure for the variogram modelling process as well as other kriging parameters. A literature database is developed in order to provide insight and …

Overview Of Co₂ Leakage Problems And Sealants For Co₂ Leakage Remediation, Shudai Peng

Masters Theses

"Excessive Carbon Dioxide (CO₂) emission has become a serious issue and caused lots of environmental problems. Carbon Capture and Storage (CCS) program has been developed to reduce the CO₂ content in the atmosphere. CO₂ storage has been targeted mainly on depleted oil or gas reservoirs and deep saline aquifers. However, leakage could occur through wellbores, cap rocks, formation faults, and fractures during and after CO₂ injection. To minimize the risk, different types of sealants have been investigated to prevent CO₂ leaks. The aim of this thesis is to provide a comprehensive review of the materials which could be used as …

Evaluation Of Preformed Particle Gel As A Diverting Agent For Acidizing, Bo Wei

Masters Theses

"Preformed particle gels (PPGs) have been developed and successfully used to improve conformance in heterogeneous reservoirs. However, no research has been reported to show their potential diverting applications in acidizing because of their unknown performance in this process. This work targets on evaluating the potential of PPGs to be used as diverting agents and factors influencing the diverting performance.

The swelling properties of three types of PPGs (PPG #1, #2, and #3) were first studied in brine and acid, including the swelling kinetics and equilibrium, PPG strength, and deswelling performance. Effects of different brine concentration, acid concentration, and temperature were …

A Bounded Actor-Critic Algorithm For Reinforcement Learning, Ryan Jacob Lawhead

Masters Theses

"This thesis presents a new actor-critic algorithm from the domain of reinforcement learning to solve Markov and semi-Markov decision processes (or problems) in the field of airline revenue management (ARM). The ARM problem is one of control optimization in which a decision-maker must accept or reject a customer based on a requested fare. This thesis focuses on the so-called single-leg version of the ARM problem, which can be cast as a semi-Markov decision process (SMDP). Large-scale Markov decision processes (MDPs) and SMDPs suffer from the curses of dimensionality and modeling, making it difficult to create the transition probability matrices (TPMs) …

Reimagining The Stacks: Classroom Technology And Library Collaboration For Writing In The Disciplines, Jossalyn Larson, Daniel C. Reardon

Journal of Student Success in Writing (Archived)

This article details the process by which one university redesigned a first year writing course to better promote discipline-specific and best-practice research techniques. The program offers experiential learning activities through scholarly collaboration, using library staff as mentors, producing an open-access peer-reviewed student journal, and emphasizing face-to-face interaction of peer research communities. It has the potential to establish for students in high school, community colleges and universities that research writing is fundamentally about joining and contributing to a conversation.

Dynamic Electromechanical Characterization Of Ferroelectrics At Cryogenic Temperatures, William Kent Hays

Masters Theses

"Electromechanical coupling in ferroelectric materials has given rise to a myriad of technological applications. Through the complex domain structure of ferroelectrics materials, which are typically stiff and have low damping, can exhibit significant structural damping. The applications for a material with a relatively large Young’s modulus and the ability to damp out vibrations would be useful for structures, more specifically, aerospace structures. The dynamic mechanical properties of ferroelectrics, particularly mechanical properties while an electric field is applied, are not well understood. This is due in part to the lack of experimental methods to measure such properties. Even with recent advancements …

Wrinkling Of Functionally Graded Sandwich Structures Subject To Biaxial And In-Plane Shear Loads, Harold Costa

Masters Theses

"Benefits of a functionally graded core increasing wrinkling stability of sandwich panels have been demonstrated in a recent paper [1] where a several-fold increase in the wrinkling stress was observed, without a significant weight penalty, using a stiffer core adjacent to the facings. In the present paper wrinkling is analyzed in case where the facings are subject to biaxial compression and/or in-plane shear loading and the core is arbitrary graded through-the-thickness. Two issues addressed are the effect of biaxial or in-plane shear loads on wrinkling stability of panels with both graded and ungraded core and the verification that functional grading …

3d Bioprinting A Pcl/13-93b3 Glass Composite And Its Potential Use As A Bio-Ink, Caroline Blair Murphy

Masters Theses

"A major limitation of using synthetic scaffolds in tissue engineering is little growth of incorporated cells in the interior of the scaffold, resulting in insufficient angiogenesis in the scaffold interior. Recently, cells have been 3D bioprinted concurrently with biomaterials to produce a cellularized, bioactive, angiogenic 3D environment. This thesis describes a novel solvent-extrusion method for printing polycaprolactone (PCL)/bioactive borate glass composite as a biomaterial for a cell-laden scaffold.

Bioactive borate glass was added to a mixture of PCL and organic solvent to make an extrudable paste, creating scaffolds measuring 10×10×1 mm³ in overall dimensions with pore sizes ranging from …

Design And Modeling Of An Aluminum Smelting Process To Analyze Aluminum Smelter And Identify The Alternative Uses Of Nuclear Power Small Modular Reactor, Rajesh Ramkrushna Patharabe

Masters Theses

"This thesis focuses on design and analysis of an Aluminum Smelting process using computer simulation which performs a dynamic state computation. The objective is to develop a Dynamic Simulation Model of an Aluminum Smelter using Mimic Simulator to analyze the dynamic behavior of an Aluminum Smelter to evaluate strategies for alternative design or uses of Nuclear Power Small Modular Reactor to improve the efficiency of the process and to reduce the heat losses.

Increasing energy needs, decrease of the availability of cheap electricity and the need to reduce the greenhouse gases emissions are the biggest hurdles for running Aluminum smelters …

Recovery Of Phosphate Minerals From Plant Tailings Using Direct Froth Flotation Process, Ashraf Alsafasfeh

Masters Theses

"The wastes produced from phosphate industry presents many challenges due to the economic and environmental impacts of their disposal. In the meantime, scarcity of high-grade phosphate ores persuades researchers to find novel methods of upgrading these wastes (secondary sources) and recycling them in the production plant circuit. The goal of this study is to investigate the potential to upgrade the phosphorus content in the tailing produced from a phosphorous production plant using direct froth flotation process. Characterization studies such as X-ray diffraction (XRD), scanning electron microscopy (SEM), and mineral liberation analysis (MLA) were first conducted to identify the mineralogical and …

Biodegradable Capacitive Pressure Sensor Toward Temporary Implants For Intervertebral Pressure Monitoring, Devdatt Chattopadhyay

Masters Theses

"The objective of this thesis is to demonstrate a new class of implantable biomedical device, based on biodegradable borate glass as the substrate material that can be potentially used to monitor the intervertebral pressure in the lumbar region of the human body. Two major types of implantable biomedical devices include the permanent prosthetic devices such as pacemakers and the temporary implants for short-term intervention and monitoring. Unless surgically removed after their intended operation, the temporary implants are left inside the body causing electromagnetic issues, latent complications and various biomechanical safety concerns. In order to address this issue, a new device …

In Situ Ph Determination Based On The Nmr Analysis Of ¹H-Nmr Signal Intensities And ¹⁹F-Nmr Chemical Shifts, Ming Huang

Masters Theses

"The pH of an NMR sample can be measured directly by NMR experiments of signal intensities, chemical shifts, or relaxation time constants that depend on the pH. The ¹H NMR peak intensities of the pH indicator phenolphthalein change as it changes from the OH-depleted form to the OH-rich form in the range of pH = 11.1 to 12.7. Because this range is rather small, another NMR technique was utilized based on ¹⁹F chemical shifts. The shift of F^- in an aqueous solution of NaF changes in the alkaline range between pH = 11.0 and 14.0 and even …

Comparison Of ²⁵²Cf Time Correlated Induced Fission With Amli Induced Fission On Fresh Mtr Research Reactor Fuel, Jay Prakash Joshi

Masters Theses

"The effective application of international safeguards to research reactors requires verification of spent fuel as well as fresh fuel. To accomplish this goal various nondestructive and destructive assay techniques have been developed in the US and around the world. The Advanced Experimental Fuel Counter (AEFC) is a nondestructive assay (NDA) system developed at Los Alamos National Laboratory (LANL) combining both neutron and gamma measurement capabilities. Since spent fuel assemblies are stored in water, the system was designed to be watertight to facilitate underwater measurements by inspectors. The AEFC is comprised of six ³He detectors as well as a shielded …

Predicting The Impact Of Data Corruption On The Operation Of Cyber-Physical Systems, Erik David Burgdorf

Masters Theses

"Cyber-physical systems, where computing and communication are used to fortify and streamline the operation of a physical infrastructure, now comprise the foundation of much of modern critical infrastructure. These systems are typically large in scale and highly interconnected, and span application domains from power and water distribution to autonomous vehicle control and collaborative robotics. Intelligent decision support in these systems is heavily reliant on the availability of sufficient and sufficiently correct data. Failure or malfunction of these systems can have devastating consequences in terms of public safety, financial losses, or both.

The research described in this thesis aims to predict …

Family-Based Association Studies Of Autism In Boys Via Facial-Feature Clusters, Luke Andrew Settles

Masters Theses

"Autism spectrum disorder (ASD) refers to a set of developmental disorders with varied attributes. Due to its substantial heterogeneity in terms of behavioral and clinical phenotypes, it is challenging to discern the genetic biomarkers behind ASD, even though the disease is known to be genetic in nature. This serves as a motivation to detect relationships between single nucleotide polymorphisms (SNPs) and a causal autism disease susceptibility locus (DSL) within more homogeneous subgroups. Recently, clinically meaningful subclassifications of ASD have been discovered utilizing facial features of prepubescent boys. Therefore, through the employment of data from 44 prepubertal Caucasian boys with ASD …

Liquid Pulsed Plasma Thruster Plasma Plume Investigation And Mr-Sat Cold Gas Propulsion System Performance Analysis, Jeremiah Daniel Hanna

Masters Theses

"The plasma plume produced by a liquid pulsed plasma thruster is investigated using a Langmuir triple probe and a nude Faraday probe. The Langmuir triple probe failed to produce results which are suspected caused by the presence of ionic liquid in the plume resulting in shorting of the probe. The nude Faraday probe is able to record the ion current density which revealed a high level of inconsistency in the plasma plume. Ion current density recorded by the nude Faraday probe had a relative standard deviation of upwards of 100% of the mean value. Controlling the amount of propellant used …

Classification Of Basal Cell Carcinoma Using Telangiectatic Vessels And Machine Learning, Hemanth Yadav Aradhyula

Masters Theses

“Basal cell carcinoma (BCC) is one of the most common types of skin cancer in the United States. Early detection of BCC by noninvasive techniques can decrease delay in treatment and save cost. A recent study estimated that 5.4 million cases of non-melanocytic skin cancer (NMSC) occur each year in the US. BCC accounts for 50% of NMSC cases. Telangiectasia, which appears in most BCCs is an important feature for identification of BCC for an automatic diagnostic system. In this thesis, three methods for detection of telangiectasia present in dermoscopy lesion image (DI) were proposed. Detected telangiectasia in DI was …

In-Situ Control Of Substrate Temperature In Additive Manufacturing To Homogenize Micro-Hardness Of Laser Clad Deposits Using Thermo-Electric Cooling, Raghu Ram Kolla

Masters Theses

”Nickel hard-surfacing alloys are replacing hard Chromium coatings due to their excellent wear and corrosion-resistant properties. In laser cladding of these alloys, however, these properties can vary across the height of the deposit due to an accumulation of excess heat generated in the deposit during the process. This may result in uneven wear of the clad parts which can be detrimental for practical purposes. The research objective is to develop an in-situ cooling system that works in line with the laser deposition system to extract the excess heat buildup and reduce the variation in the hardness of the Ni-based clad …

Automatic Discrimination Of Basal Cell Carcinoma From Sebaceous Hyperplasia Based On Image Processing Of Dermoscopy Images, Jonathan Liao

Masters Theses

“This project focuses on discriminating basal cell carcinoma from sebaceous hyperplasia using image processing techniques. Basal cell carcinoma is a kind of malignant skin cancer that needs to be treated; however, if diagnosed as sebaceous hyperplasia, a benign lesion which is a mimic of basal cell carcinoma, then it may not be treated properly. Through observation, white pouch-like areas within the lesion appear in sebaceous hyperplasia images; whereas in basal cell carcinoma images, white areas tend to be formed in a smashed irregular figure shape. Hence, utilizing image processing techniques to segment these white areas from the images and using …

Error Mapping Of Build Volume In Selective Laser Melting, Ninad Kulkarni

Masters Theses

“Selective laser melting is one of the commonly used additive manufacturing processes employed for production of functional part. Therefore, quality aspects such as dimensional accuracy have become a point of great interest. Like all of the other additive manufacturing processes selective laser melting process suffers from the issue if having wide range of process parameters making the process control a complex task. Additionally, issues specific to the selective laser melting process such as position dependency of accuracy of the part, makes it difficult to predict the resulting dimensional inconsistencies in the part manufactured by this processes. This research is an …

A Study Of The Potential Applications Of Am241, And Determining The Feasibility Of Using Gamma Spectroscopy For Future Physical Validation, Eric A. Feissle

Masters Theses

“Am241 is typically produced via Pu241 decay in a uranium fueled reactor. Presence of Am241 can be used as the age estimation tool for spent fuel, which is a focus of this thesis along with the interest of the measurement and the ratio of production rates of Am241’s activation products; Americium-242 and its first excited state of Americium-242m. MCNP models of the core and BEGe 3825 detector were built. These models were compared with established and physical measurements of gamma/x-ray standards that were available at the reactor. Thermal fluxes at 200 kW for potential foils centered in the source holder …

An Investigation Of Borax For Sealing Inflow From Berea Sandstone, Tri-Tris Bao Nguyen

Masters Theses

"Well inflow control is a major challenge for the oil and gas industry. Erle Haliburton revolutionized well inflow control with his patent for cementing oil wells in 1921. Soon after, cement became the accepted material to establish well integrity and has been ever since. Cement is used in all phases of the well life cycle, and it is expected to hold indefinitely once set. Yet based on the nature of cement and the placement techniques, flow pathways may develop from improper cementing jobs or from cement degradation over time. Well integrity is especially crucial for wellbore plugging and abandonment, since …

Rita “Claire” Callan

OJOT Sponsor Profiles

No abstract provided.

Assessment Of Rockfall Rollout Risk Along Varying Slope Geometries Using The Rocfall And Crsp Software, Mariam S. Al E'Bayat

Masters Theses

"Most routes in mountainous areas suffer from rock falling, rolling and bouncing risk. There are many computer programs concerned with simulating the rockfall problem, and whereas they have the same purpose, they however differ in the input data that's needed to simulate the problem, and they also differ in the way of processing and kind of output.

This study used Rocfall® and the Colorado Rockfall Simulation Program (CRSP®) to simulate sixty-three models of varying slope geometry, where only the slope geometry is changed with the same material properties for both the slope and the rocks.

Both programs were fast and …

Evaluation Of Preformed Particle Gels Penetration And Propagation Behavior For A Conformance Control Treatment In Partially Open Conduits, Ahmed Mohamed Aldalfag

Masters Theses

"Preformed particle gels (PPGs) serve as a conformance control agent and have been used widely to control excess water production through conduits, fractures or fracture-like features. This research ranks the parameters that impact PPG resistance to water flow in partially opened conduits. Experiments were conducted to examine the effect of brine concentration, PPG injection pressure, back pressure, reducing water salinity and matrix permeability on PPG resistance to water flow through conduits, PPG penetration to the matrix. PPGs were swelled in different concentration brines and were injected into the conduits at a few designed injection pressures. PPG swollen in high brine …