Digital Commons Network^™

Research Progress On Transport Vibration Damage And Effects Of Fruits On Its Postharvest Physiology Characteristics And Quality, Jiang Bao

Food and Machinery

In our country, truck transport vibration is the important reason which leads to mechanical damage and quality decreased of fruits during storage and transportation. This paper was on the basis of the analysis of the vehicle vibration in the process of truck transportation, and influencing factors, focused on the latest process in effects of transport vibration on postharvest physiology properties and quality of fruits, providing a basis and reference for the reduced transport vibration damage of fruits.

Research Status And Progress Of Fatty Acid Analysis Methods In Beans, Xie Yanhua, Xie Jing, Li Pao, Chen Miaofen, Jiang Liwen, Chen Lili

Food and Machinery

In this paper, the methods of fatty acid extraction and methyl esterification of beans (the main products are soy food) were reviewed. A variety of physiological functions of fatty acids are described. Moreover the differences of diverse detection methods of fatty acids were analyzed. We hope to provide testing methods for the change of fatty acids in bean product processing, and providing the basis for the development of potential function's in oil and fat products.

A Study On The Oxidation Of Hydrogen Peroxide At Au(111) And Au(100) Electrodes, Yong-Li Zheng, Jie Wei, Yan-Xia Chen

Journal of Electrochemistry

The oxidation reactions of hydrogen peroxide (H₂O₂) at Au(111) and Au(100) electrodes in 0.1 mol·L^-1 HClO₄ were investigated by using rotating disk electrode system. It was found that H₂O₂ could be readily oxidized to O₂ at both Au(100) and Au(111) surfaces with the onset potential close to its equilibrium potential. In contrast, the onset overpotential for H₂O₂ reduction was above 0.4 V, while the onset overpotential for H₂O₂ oxidation at Au(100) was ca. 0.1 V more negative than that at Au(111), this is probably …

Lithium-Sulfur (Selenium) Batteries: Interface Issues And Solving Strategies, Nian-Wu Li, Ya-Xia Yin, Yu-Guo Guo

Journal of Electrochemistry

The stable interface is still a challenge for lithium-sulfur (selenium) batteries because of the low conductivity of sulfur (selenium), dissolution of polysulfide (polyselenide), volume expansion of sulfur (selenium), and lithium dendrite growth. This review describers some recent developments in lithium-sulfur (selenium) batteries and highlights our efforts in this field. The possible strategies for building stable interface in the lithium-sulfur (selenium) batteries including nano-restriction effect, chemical bonding, interface adsorption, surface coating, electrolyte optimization, and Lithium anode treatment have been discussed.

Stm Investigation Of Oxygen Reduction Reaction On Solid Interface In Fuel Cell, Zhen-Feng Cai, Bing Sun, Wen-Jie Jiang, Ting Chen, Dong Wang, Li-Jun Wan

Journal of Electrochemistry

An electrocatalyst for oxygen reduction reaction (ORR) is an important component for fuel cells. An investigation at interfacial electrochemical reactions toward ORR at a molecular scale benefits mechanistic understanding as well as rational design of catalysts. Scanning tunneling microscopy (STM) has been proven to be a powerful tool to monitor chemical reactions and to provide in-situ information about the interfacial electrochemical reactions at a molecular level. This review summarizes the recent STM studies in monitoring the interface processes such as morphological changes, molecular changes, reaction intermediates, and oxidation products. The prospects of future development in this field are outlined.

Syntheses Of Ag@Pd@Pt Nanoparticles With Tunable Shell Thickness For Electrochemical Oxidation Of Formic Acid, Xiao-Dong Lin, Du-Hong Chen, Zhong-Qun Tian

Journal of Electrochemistry

In an effort to lower cost of a catalyst, the silver (Ag) core with palladium (Pd) layer then platinum (Pt) island (Ag@Pd@Pt) nanoparticles were synthesized and the electrocatalytic activity of Ag@Pd@Pt nanoparticles on formic acid was compared with that of Au@Pd@Pt nanoparticles reported previously. The results showed that the existence of a small amount of Pt could significantly improve the activity of the catalyst. When the surface coverage of Pt approached 0.5 monolayers, the activity of Ag@Pd@Pt nanoparticles reached the maximum. Though the onset potential of the electro-oxidation was slightly more positive (about 50 mV), the overall electrocatalytic activity of …

Investigation On Laser Induced Deposition Of Cu-Based Materials At [Bmim]Bf4/Pt Electrode Interface, Min-Min Xu, Jin-Hua Mei, Jian-Lin Yao, Ren-Ao Gu

Journal of Electrochemistry

By controlling the negative potential, Cu-based materials were deposited at the [BMIm]BF₄/Pt electrode interface under the laser irradiation. The effects of laser power and irradiation time on the yield of deposition products were studied by using different laser powers and different irradiation time. The product yield could be directly determined by the size of deposition point through the observation from the optical microscope. Further mechanism study combined with the formula deduced that the thermal effect of the laser could make the electrode surface temperature rise 110 degrees, which can promote the occurrence of electrodeposition. By SEM characterization, the …

Intrinsic Interfacial Property Between High-Voltage Lini0.5Mn1.5O4 Cathode And Electrolyte, Li Li, Jing-Jing Xu, Shao-Jie Han, Wei Lu, Li-Wei Chen

Journal of Electrochemistry

To obtain high energy density, developing high-voltage cathode materials is an effective approach. The cathode/electrolyte interface stability is the key factor for the cycle performance and safety performance of high-voltage lithium ion batteries. It is, therefore, of significant importance to study the stability of cathode/electrolyte interface. However, many reports have shown that at the cathode/electrolyte interface the cathodes were prepared by coating the mixture of active materials with a conductive additive and a binder on an Al current collector. The introduction of additives will interfere the surface morphology and component analyses, resulting in difficulty to acquire the intrinsic information at …

An Stm Study On The Structure Of Pt(100)/Ionic Liquid Omipf6 Interface, Jin Peng, Mian-Gang Li, Li-Qiang Xie, Jia-Wei Yan, Bing-Wei Mao

Journal of Electrochemistry

Potential-dependent structures of Pt(100)/ionic liquid 1-methyl-3-octylimidazolium hexafluorophosphate (OMIPF₆) interface have been studied by electrochemical scanning tunneling microscopy (ECSTM). The cation OMI⁺ forms ordered structure on Pt(100) surface, which exists in a potential region of about 1.2 V. When the potential is more negative than -0.6 V, it can be seen that the ordered structure transforms to disordered structure. When the potential shifts positively to +0.6 V, the desorption of cations OMI⁺ occurs, which indicates that strong electrostatic repulsion is needed to overcome chemical interaction between OMIPF6 and Pt(100) surface, leading to the desorption. The above results …

Chitosan/Nonahydrate Gel Derived Fe-N-Doped Porous Carbon Sheet As High-Efficient Orr Electrocatalyst, Fan-Lu Meng, Xin-Bo Zhang, Jun-Min Yan

Journal of Electrochemistry

The chitosan/nonahydrate gel was used as a precursor to realize the uniform mixture of N-polymer and metal salt. After lyophilization treatment, the gel went through heat treatment and acid etch. Accordingly, the Fe-N-doped porous carbon sheet with homogenous composition and microstructure was prepared. Compared with the commercial Pt/C catalyst, the Fe-N-doped porous carbon sheet exhibited more positive onset potential and half-wave potential, higher current density, and especially, excellent durability. The power density of 318 mW·cm^-2 was obtained in alkaline fuel cell with the Fe-N-doped porous carbon sheet as a cathode catalyst, which is higher than 267 mW·cm^-2 with …

Synthesis Of Ultrathin Co3O4 Nanoflakes Film Material For Electrochemical Sensing, Hui-Juan Wang

Journal of Electrochemistry

Ultrathin cobalt oxide (Co₃O₄) nanoflakes film material was synthesized by using an electro-deposited cobalt layer as a raw material through a simple oxidation method and followed by a heat treatment at 350 ^oC. The physical characterizations of the Co₃O₄ nanoflakes film were performed by scanning electron microscopy (SEM), X-ray diffraction (XRD) and transmission electron microscopy (TEM) technologies, and the electrochemical activity was measured by cyclic voltammetry (CV). As a promising material for electrochemical sensing, the as-synthesized ultrathin Co₃O₄ nanoflakes film material exhibited excellent electrochemical activity for H₂O …

Lithium Plating Identification From Degradation Behaviors Of Lithium-Ion Cells, Jian-Bo Zhang, Lai-Suo Su, Xin-Yu Li, Hao Ge, Ya-Kun Zhang, Zhe Li

Journal of Electrochemistry

Lithium plating has huge impact on the lifetime and safety of lithium-ion cells. It is, therefore, necessary to identify lithium plating. In this study, the accelerated stress tests of lithium-ion cells were conducted under different conditions with multi-stress loads. Based on the different effects of the two major aging mechanisms, namely, SEI (Solid Electrolyte Interface) layer growth and lithium plating, on the degradation behaviors, two lithium plating identification methods of resistance-capacity plot and Arrhenius plot were employed. The experimental results revealed that the two identification methods are highly consistent with each other. Furthermore, the origins of capacity loss were distinguished …

Research Of Volatile Components Of Lanzhou Fat-Tailed Sheep, Li Zhenzi, Yang Jutian, Qi Gaozhan, Zang Rongxin, Liu Hongna, Long Ling, Cao Xin

Food and Machinery

It was aimed to analyze the volatile components and key volatile components of Lanzhou fat-tailed sheep in different gender in this study, and the small fat-tail sheep were chosen as control. The results showed that Lanzhou fat-tailed wethers contained totally 80 kinds of volatile materials, while ewes had 85 kinds. Aldehydes were found the key volatile components, and the relative contents were respectively 31.110% and 22.305%. The key volatile components contained decanal, octanal, nonanal, 2, 4-nonadienal, 2-nonenal, 2,4-decadienal and (E)-2-decenal, which smelled like wax, fat, mushroom and cucumber, and wethers contained 2 more kinds aldehydes than ewes. Compared to small …

A Method For Predicting Tvb-N Content Of Cooked Beef Based On Hyperspectral Image, Tian Weixin, He Dandan, Yang Dong, Lu Anxiang

Food and Machinery

Based on the shortcomings of the traditional detection methods for meat freshness, such as time-consuming, laborious, low efficiency, loss and other defects, and put forward using hyperspectral imaging (HSI) technology to predict cooked beef freshness index of volatile basic nitrogen (TVB-N) content. Firstly, the hyperspectral data of cooked beef samples were obtained by HSI system, and the black and white correction was carried out. And then, the hyperspectral data was preprocessed using the moving average smoothing and the multiple scattering corrections. Finally, the support vector regression (SVR) method was used to establish the prediction model of TVB-N content based on …

Structure Improvement And Performance Optimization Of Thin-Walled Parts, Li Shaohai

Food and Machinery

The CAD/CAE technical was used to study structure and dynamics characteristics of thin-walled parts. Based on a type of thin-walled part, its finite element model of was set up on WorkBench platform, and some low order natural frequency and vibration mode of its structure were also calculated and analyzed. Four structure design schemes about improving dynamic characteristics of the part was established, and then an optimal structure of it was determined through calculating and analyzing its dynamic parameter. The results indicated that vibration resistance of the part could be strengthened effectively by using the cross rib structure, and it was …

Fuzzy Pid Controller Based On Plc And Application On Hot Air Drying Chamber, Wang Pan, Hong Yuanqian, Huang Hanying, Hu Yuelai, Nie Shaowu, Zhao Siming

Food and Machinery

According to the non-linearity and large-lag phenomena in temperature and humidity in hot air drying process, conventional PID control and fuzzy control were combined using fuzzy PID control theory in the system. A Fuzzy PID controller was designed to achieve the PID parameters’ online self-tuning. Results: when the target temperature is set at 15 ℃, compared with the conventional PID control, the maximum overshoot of the hot air drying control system based on fuzzy PID control is decreased by 3 ℃, the adjustment time is reduced by 10 min and the steady state error is ± 0.5 ℃, with better …

Influence On Quality Of White Pulp Loquat Wine With Different Artificial Aging Technology, Yuan Min, Wang Qiaobi, Zhao Qian, Zhou Caiqiong, Wu Xiyu

Food and Machinery

To recognize the effect of aging technology on quality of white pulp wine, samples were preprocessed by ultrasonic, microwave and cold and hot treatment. The results showed that the three different aging treatments all could lower total acid slightly and increase chroma of loquat wine, and aging by cold and hot treatment got higher scores than ultrasonic as well as microwave treatment in sensory evaluation. The species of aroma substances detected decreased while proportion of undetected compounds increased after aging treatment. The highest content were alcohols and esters, hot and cold, ultrasonic and microwave treatment, accounted for 79.8%, 78.3% and …

Preparation And Thermal Properties Of Nano-Gnps As Stuffing Into The Cool Storage Phase Change Materials, Gao Maotiao, Wang Chunxu, Wu Xuehong, Wang Yanling, Su Zhen

Food and Machinery

Because of its good thermal property, nano-graphite (nano-GnPs) materials has became a research hotspots. The best adding amount of polyester type dispersant of dispersed system of nano-GnPsparaffin composite phase change materials (PCMs) was 2% by mechanical and chemical modification methods with nano-GnPs as stuffing. The stable uniform dispersion of composite PCMs was obtained by precipitation and separation. The adding amount of nano-graphene had no effect on the starting and termination points and peak of phase change. However, the adding amount of nano-GnPs will lower the phase change latent heat of composite PCMs in some degree. Phase change latent heat of …

Tomato Maturity Color Discrimination Based On Machine Vision, Bi Zhijian, Zhang Ruoyu, Qi Yanjie, Wu Yebei

Food and Machinery

Tomato quality is one of the most important factors ensured the consistency of tomato market factors. A color analysis method was proposed for classifying the fresh tomato, with reference to the national standard GB 8852—88, defining the classification standards of tomato maturity. In this study, tomato was divided into the four categories, full ripe, ripe, half ripe, and green ripe. RGB images of tomato were collected, removing the background and filtering de-noising, and then they were converted to HIS and HSV color models. Through the MATLAB programming, the mean values of the color components R, G, B, H, S, V, …

Study On Extraction Process And Antioxidant Activity Of Melanin From Tremella Fuciformis Residue, Shi Xuan, Yan Yu, Liang Xuming, Tan Hongjun, Yang Yong, Zhong Geng, Shi Wenjuan

Food and Machinery

Melanin was extracted by alkali solution and acid extraction method with the assistance of microwave from Tremella fuciformis residue. The separation and purification was optimized. The spectral characteristics and antioxidant activities of melanin were researched. The results showed that the optimum process of extracting melanin from Tremella fuciformis residue by alkali solution and acid extraction method with the assistance of microwave were as follows: amount of extraction solvent to yield 1∶40, concentration of NaOH 1.75 mol/L, hydrolyzing time 2 h, microwave treatment time 60 s. In this condition color value of melanin extracted from Tremella fuciformis residue was 156.6, and …

Study On The Antioxidation Of Chilli Seed In Lard Oil, Shen Wenjiao, He Xinyi, Feng Changlu, Liu Bin

Food and Machinery

The antioxidation of chilli seed was investigated in this study. The unmilled and milled chilli seeds, and the ethanol extracts from them, with different concentration were added into lard oil, respectively, and put at (63±2) ℃. The POV value of the lard oil under different period was determined. The regression model between POV and storage time was established, and the induction time and oxidation protection factor were also calculated to evaluate antioxidant capacity of chilli seed. The results showed that the three kinds of chilli seed added in lard had antioxidant capacity. Best antioxidant effect was showed when unmilled added …

Effect Of Process Conditions Ongel Properties Of Egg White Silver Carp Surimi, Wang Xixi, Lin Chao, Li Xianghong, Xu Meiyu, Huang Qun, An Fengping

Food and Machinery

In order to improve the quality and add the value of silver carp surimi, the effect of different process conditions such as egg white powder, rinsing, heating, and frozen storage on gel properties of egg white silver carp surimi was investigated by using the texture profile analysis. The results showed that egg white powder had significant effect on gel strength with 7.0%. Silver carp surimi made by washing two times with water and one time with 1.0% NaCl solution, however, rinsing solution with Ca²⁺ was inadvisable. After processed under the heating method of 2-phase, 40 ℃ hot-watering for 60 …

A Slic-Basedsuperpixel Segmentation Method By Using Local Texture Features For Granular Image, Li Xiaoyu, Zhang Qiuju

Food and Machinery

This paper adopts SLIC-based superpixel segmentation method in the granular image detection. SLIC method segments the granular image into superpixel block which will reduce the complexity of the subsequent image processing. As SLIC superpixel segmentation method doesn’t use the texture feature in the distance calculation, the detail of the outline for the granular object is lost. This paper adopts the CRLBP local texture operator as the texture feature to improve the SLIC segmentation’s distance calculation and searches the similar pixel in circle neighborhood pixels to guarantee the processing speed. The test on cotton seed image shows that the improved SLIC …

A Survey And Content Analysis Of Army Manuals Held By The National World War Ii Museum Archives, Amanda Fallis

SLIS Connecting

This study is a content analysis of a collection of several hundred Army manuals published by the War Department, the precursor of the United States Department of Defense (U.S. War Department, 2013). The manuals were in varying conditions, address a variety of topics, and were published in years surrounding and during World War II.

Year In Review: The Top Stories At Roger Williams University In 2016, Jill Rodrigues

Featured News Story

Celebrate RWU’s many successes in 2016 with a look back at the most-read stories of the year.

Novel Models Of Visual Topographic Map Alignment In The Superior Colliculus., Ruben A Tikidji-Hamburyan, Tarek A El-Ghazawi, Jason W. Triplett

Pediatrics Faculty Publications

The establishment of precise neuronal connectivity during development is critical for sensing the external environment and informing appropriate behavioral responses. In the visual system, many connections are organized topographically, which preserves the spatial order of the visual scene. The superior colliculus (SC) is a midbrain nucleus that integrates visual inputs from the retina and primary visual cortex (V1) to regulate goal-directed eye movements. In the SC, topographically organized inputs from the retina and V1 must be aligned to facilitate integration. Previously, we showed that retinal input instructs the alignment of V1 inputs in the SC in a manner dependent on …

Shear Driven Micro-Fluidic Pump, Nihad E. Daidzic

Aviation Department Publications

United States Patent, Patent Number US 9,528,503 B2, Date of Patent December 27, 2016.

An example includes an apparatus to pump a fluid. The apparatus includes a housing extending along a length defining an elongate interior, an actuator in the housing, conforming to the elongate interior, the actuator including a plurality of lumens, each having a length extending substantially parallel to the elongate interior, each from around 10 to 200 micrometers across and an actuator configured to oscillate the actuator in the actuator houslng along the length of the elongate interior with a rate differential between movement in a first …

New Bounded Backstepping Control Designs For Time-Varying Systems Under Converging-Input-Converging-State Conditions, Frederic Mazenc, Michael Malisoff, Jerome Weston

Faculty Publications

We provide new asymptotically stabilizing backstepping controls for time-varying systems in a partially linear form. Instead of measuring the full current state, our main feedback design uses several time lagged values of a function of the state of the nonlinear subsystem, and has no distributed terms. Other advantages are that we do not require differentiability of the available nominal controls for the nonlinear subsystems, and that our controls do not contain Lie derivatives. This improves on a recent work in Automatica that covered the special case where the linear part has one integrator, since we now allow an arbitrary number …

New Prediction Approach For Stabilizing Time-Varying Systems Under Time-Varying Input Delay, Frederic Mazenc, Michael Malisoff

Faculty Publications

We provide a new sequential predictors approach for the exponential stabilization of linear time-varying systems with pointwise time-varying input delays. Our method circumvents the problem of constructing and estimating distributed terms in the stabilizing control laws, and allows arbitrarily large input delay bounds. We illustrate our method using a pendulum dynamics.

Associating Mathematics To Its History: Connecting The Mathematics We Teach To Its Past, Joseph M. Furner, Ernest A. Brewer

Transformations

Across the USA and around the world now, globalization has taken a strong hold. The purpose of this paper is to explore the historical considerations that can be incorporated in the teaching of mathematics. The paper will also provide suggestions for teaching math by interweaving historical elements into the mathematics instruction. Teachers should strive to bridge the cultural and historical gap among all students by incorporating innovative ideas as well as historical and cultural connections into their teaching so to foster understanding, appreciation, and tolerance for the richness inherent in diversity and a sound understanding of mathematics and appreciation for …