Digital Commons Network^™

Plate Kinematics Of The Afro-Arabian Rift System With An Emphasis On The Afar Depression, Helen Carrie Bottenberg

Doctoral Dissertations

This work utilizes the Four-Dimensional Plates (4DPlates) software, and Differential Interferometric Synthetic Aperture Radar (DInSAR) to examine plate-scale, regional-scale and local-scale kinematics of the Afro-Arabian Rift System with emphasis on the Afar Depression in Ethiopia. First, the 4DPlates is used to restore the Red Sea, the Gulf of Aden, the Afar Depression and the Main Ethiopian Rift to development of a new model that adopts two poles of rotation for Arabia. Second, the 4DPlates is used to model regional-scale and local-scale kinematics within the Afar Depression. Most plate reconstruction models of the Afro-Arabian Rift System relies on considering the Afar …

Quantitative Analysis Of Co-Enzyme A In A Plant Tissues And Cancer Biomarkers In Urine Samples By Using Capillary Electrophoresis And Liquid Chromatography-Mass Spectrometry, Yongqing Jiang

Doctoral Dissertations

"Despite continuous effort and progress in cancer detection and therapy, cancer remains one of our greatest health concerns because of its low survival rate and rapid incidence increase. One reason for this is the late detection and therefore pre-cancer diagnosis is crucial. In pre-cancer studies, cancer biomarkers become significant because of the useful information it contains such as possible cancer type and stage. Separation and detection technique plays an important role in cancer biomarker identification.

Coenzyme A (CoA) facilitates more than 100 chemical reactions in cells. Because of its low abundance accumulated in cells, it is critical to develop a …

Role Of Alloy Additions On Strengthening In 17-4 Ph Stainless Steel, Arpana S. Murthy

Doctoral Dissertations

"Alloy modifications by addition of niobium (Nb ), vanadium (V), nitrogen (N) and cobalt (Co) to cast 17-4 PH steel were investigated to determine the effect on mechanical properties. Additions of Nb, V, and N increased the yield strength from 1120 MPa to 1310 MPa while decreased the room temperature charpy V notch (CVN) toughness from 20 J to four Joules. The addition of Co to cast 17-4 PH steel enhanced the yield strength and CVN toughness from 1140 MPa to 1290 MPa and from 3.7 J to 5.5 J, respectively. In the base 17-4 PH steel, an increase in …

Spatial-Temporal Reasoning Applications Of Computational Intelligence In The Game Of Go And Computer Networks, Tae-Hyung Kim

Doctoral Dissertations

"Spatial-temporal reasoning is the ability to reason with spatial images or information about space over time. In this dissertation, computational intelligence techniques are applied to computer Go and computer network applications. Among four experiments, the first three are related to the game of Go, and the last one concerns the routing problem in computer networks.

The first experiment represents the first training of a modified cellular simultaneous recurrent network (CSRN) trained with cellular particle swarm optimization (PSO). Another contribution is the development of a comprehensive theoretical study of a 2x2 Go research platform with a certified 5 dan Go expert. …

Stability Challenges And Solutions In Current-Mode Controlled Power Electronic Converters, Seyed Mostafa Khazraei

Doctoral Dissertations

"This dissertation focuses on stability issues in single-staged and multi-staged current controlled power electronic converters. Most current-mode control (CMC) approaches suffer from sub-harmonic oscillations. An external ramp is usually added to solve this problem. However, to guarantee stability this ramp has to be designed for the worst possible case which consequently over damps the response. Adaptive slope compensation (ASC) methods are the solution for this problem. In paper 1 of this dissertation, first three ASC methods will be investigated and analyzed through their small signal models. Then, through simulation analyses and experimental test of a variable-input voltage converter the results …

Strategic Management And Entrepreneurship As Economic Development Tools, Norbert Ziemer

Doctoral Dissertations

This research develops a framework of Biobased Entrepreneurial Ventures for Rural Economic Development. Rural economic development poses unique challenges and opportunities, based on available production assets, workforce trends like "brain drain," and access to industry clusters. However, certain entrepreneurial venture opportunities are preferable for rural economic development. Since supply chains are vital to business success, initial emphasis is placed on the biomass resource base to be transformed through entrepreneurial activity into higher economic value outputs. The literature contains research on specific opportunities in rural economic development (e.g. ethanol, wind power). Many of these are limited in scope and depend on …

Stochastic Optimal Adaptive Controller And Communication Protocol Design For Networked Control Systems, Hao Xu

Doctoral Dissertations

"Networked Control System (NCS) is a recent topic of research wherein the feedback control loops are closed through a real-time communication network. Many design challenges surface in such systems due to network imperfections such as random delays, packet losses, quantization effects and so on. Since existing control techniques are unsuitable for such systems, in this dissertation, a suite of novel stochastic optimal adaptive design methodologies is undertaken for both linear and nonlinear NCS in presence of uncertain system dynamics and unknown network imperfections such as network-induced delays and packet losses. The design is introduced in five papers.

In Paper 1, …

Sustainable Engineering Practices In Transportation Projects, Kiran Rangarajan

Doctoral Dissertations

"Sustainability has become an important issue in transportation and infrastructure development projects. While several agencies are trying to incorporate a range of sustainability measures in their goals and missions, only a few planning agencies have been able to implement these policies and they are far from perfect. The low rate of success in implementing sustainable policies is primarily due to incomplete understanding of the system and the interaction between various elements of the system. The conventional planning efforts focuses mainly on performance measures pertaining to the system and its impact on the environment but seldom on the social and economic …

The Effect Of Supercritical Water On Crude Glycerin Solution, Jared Bouquet

Doctoral Dissertations

"Crude glycerin solution, a principal byproduct of the conventional biodiesel process, was reacted in supercritical water using a specially designed Haynesʼ Alloy 282 reactor system for the production of hydrogen rich syngas. The effects of temperature, pressure, water-to-carbon molar ratio, reactor residence time, and glycerin-to-methanol weight ratio on the extent of carbon gasification and gas composition were explored. Based on the results, the extent and selectivity of reactions that concurrently occur when methanol and glycerin are in the presence of supercritical water were analyzed. A decomposition reaction pathway for glycerin conversion to syngas was hypothesized, and then utilizing the results …

The Effects Of Personal Protective Respirators On Human Motor, Visual, And Cognitive Skills, Anas Ahmed Alghamri

Doctoral Dissertations

"In oxygen-deficient or toxic environments in which controlling the hazard is not feasible, workers wear personal protective respirators. Hazard controls include but are not limited to engineering controls, such as ventilation, and substituting less hazardous materials. However, respirator selection and the design of tasks that require respirators are critical issues. Understanding the effects of respirators on human abilities is critical to respirator selection and therefore to the safety and efficiency of workers. This research investigated the effect of respirators on human abilities. A review of the relevant literature was conducted, revealing that respirators can affect physiological, psychological, motor, and visual …

Hollow Hydroxyapatite Microspheres As Devices For Controlled Delivery Of Proteins And As Scaffolds For Tissue Engineering, Hailuo Fu

Doctoral Dissertations

"Hollow HA microspheres were prepared by converting Li₂O-CaO-B₂O₃ glass microspheres in a K₂HPO₄ solution. Process parameters, such as reaction temperature (25°C-60°C) and concentration of the phosphate solution (0.02-0.25 M) significantly influenced the microstructure of the hollow HA microspheres. Microspheres with the largest hollow core size were obtained at lower temperature or with low K₂HPO₄ concentration. In comparison, microspheres with high surface area (~140 m²/g) were obtained at higher K₂HPO₄ concentration (0.25 M). Upon heat treatment (up to 900°C), the surface area of the hollow HA microspheres decreased (from ~100 m²/g to ~2 m²/g), and the rupture strength increased (from ~11 …

Investigation Of Biomarkers For Noninvasive Early Diagnosis Of Cancer, Sanjeewa Bandara Gamagedara

Doctoral Dissertations

"Cancer is the second leading cause of death worldwide, and deaths from cancer worldwide are projected to continue rising, with an estimated 12 million deaths in 2030. Cancer occurs when cells in a part of the body begin to grow out of control. It develops very rapidly, and early diagnosis offers a greater chance of successful treatment and a higher survival rate. Biomarkers are good potential tools for early diagnosis. The main hypothesis of this study is that the levels of certain metabolites present in human urine can indicate the current or future behavior of cancer. Therefore, these studies focused …

Manufacturing And Characterization Of Soy-Based Polyurethane Composites, Rama Bhadra Raju Vuppalapati

Doctoral Dissertations

"The major cost drivers for composites are raw materials and manufacturing process. Automated manufacturing processes like pultrusion and low cost bio-based raw materials can significantly lower the cost of composites. Polyurethane (PU) resin systems are being introduced in the pultrusion industry as they have higher performance characteristics and manufacturing feasibility when compared to conventional resin systems such as polyester and vinyl ester. PU resin systems are generally characterized as aromatic and aliphatic. Aliphatic PU has lower mechanical properties than the aromatic resin system due to its chemical structure. Nano materials can be used to increase the mechanical properties of aliphatic …

Numerical Simulations Of Fracture Propagation And Sealing: Implications For Wellbore Strengthening, Saeed Salehi

Doctoral Dissertations

"To mitigate the small tolerance between pore pressure and fracture gradients an engineering practice referred to as "wellbore strengthening" is conducted to increase the fracture gradient. The method relies on propping and/or sealing the fractures with specially designed materials. Different competing theories exist for physical wellbore strengthening mechanisms which can be categorized into two groups. The first group explains that strengthening happens as a result of increasing wellbore hoop stress when fractures are sealed while the second group emphasis is on fracture tip isolation with suitable materials and enhancing fracture propagation pressure. The numerical models and lab experiments …

Real-Time Supply Chain Predictive Metrics, William Scott Hunter

Doctoral Dissertations

"Supply chains drive the production world. Virtually all products use a supply chain to produce them and they can determine the success of companies using them. The ability to manage supply chains is currently a mix of relationship management and science, combining personal and company relationships with data analysis.

The increased dependency on supply chains has increased the need to develop and use predictive real-time metrics to manage supply chain risk, measure suppliers and drive performance. Current metrics used are reactive and stagnant in nature. Real-time metrics will allow supply chain professionals to better manage risk. Current management techniques include …

Real-Time Localization Using Received Signal Strength, Mohammed Rana Basheer

Doctoral Dissertations

"Locating and tracking assets in an indoor environment is a fundamental requirement for several applications which include for instance network enabled manufacturing. However, translating time of flight-based GPS technique for indoor solutions has proven very costly and inaccurate primarily due to the need for high resolution clocks and the non-availability of reliable line of sight condition between the transmitter and receiver. In this dissertation, localization and tracking of wireless devices using radio signal strength (RSS) measurements in an indoor environment is undertaken. This dissertation is presented in the form of five papers.

The first two papers deal with localization and …

Modeling Aperture Radiation For Rf Interference Applications, Liehui Ren

Doctoral Dissertations

"The first topic proposes a rigorous method of moments(MoM) solution to evaluate the shielding effectiveness of a metallic enclosure with apertures on top wall by formulating a pair of coupled mixed potential integral equations (MPIEs). Application of Ewald transform to the computation of Green's function in the cavity yields fast convergence of series summation. Good agreements with a commercial tool, EMC studio, have proved the effectiveness of the proposed approach.

The second topic deals with prediction of electromagnetic interference radiation from components or interconnects in a printed circuit board by using convolution of the half-space Green's functions and the equivalent …

Advanced Neural Networks And Their Applications In Smart Grids, Bipul Luitel

Doctoral Dissertations

"Today, neural networks (NN) are used in several system identification and nonlinear control system applications. However, their implementation on large systems has been limited either because of their degraded performance or the amount of time and computation required for implementing them being impractical for real applications. The primary emphasis of this research is on the development of advanced NN - simultaneous recurrent neural networks (SRN) and cellular neural networks (CNN); and methods for learning the complexity of large systems.

US electricity infrastructure is one of the largest and the most critical infrastructure consisting of thousands of generators connected by transmission …

Analyzing Risk And Catastrophic Accidents: Using Lopa And Human Factors To Improve Safety In Generic Projects, Siddharth B. Damle

Doctoral Dissertations

"Risk assessment and identification in the early stages of any project is critical to the success of that project from time, budget and cost prespective [sic]. Identifying unacceptable risks and making provisions to mitigate those, can reduce the uncertainty in the project and ensure its smooth completion and closure. Various techniques have been developed over time to identify and quantify risks. Inspite of all the available research on risk management tools, accidents continue to happen and projects consistently fail.

The objective of this study is to first, determine the generic risks that can be encountered by a project. A list …

Behavior Of Advanced Innovative Materials For Improved Long-Term Bridge Performance, Wei Zheng

Doctoral Dissertations

"The dissertation is to present the investigation results and comprehensive understanding of the long-term performance and behavior of innovative construction materials. The materials are applied in bridge engineering in order to either enhance the conventional materials or replace them. The dissertation consists of two major parts: structural steel coatings for corrosion mitigation and thermal behavior of concrete bridge.

In First Part, evaluation of advanced structural steel coatings was carried out through laboratory weathering tests (salt-fog resistance test and QUV weathering test), adhesion test, and electrochemical techniques. Fifteen coating systems were evaluated in this part, which covered both coating and recoating …

Decreasing Time To Market For A Medical Device: New Methods For The Product Development Process, Kelly Marie Davis

Doctoral Dissertations

"Through an example, led at a leading medical device company, this dissertation will demonstrate that by applying certain lean principals and tools to the development of a medical device, shortened development times can be obtained. The two papers presented in the dissertation will fill a gap in current literature. Literature presents lean techniques and applications used in many different industries. But, due to the uniqueness of the medical device industry, these general techniques are not ideal. New methods will be used and validated at a medical device company, Covidien. Instead of trying to implement many general lean principals to their …

Design And Experimental Study Of Turbo Equalization For Multiple Antenna Systems, Amirhossein Rafati

Doctoral Dissertations

"Multiple-input multiple-output (MIMO) wireless communication systems have attracted a lot of interest in the past decade due to their capability in delivering high spectral efficiency as well as their robust performance against fading. In MIMO inter-symbol interference (lSI) channels, a severe interference problem occurs due to the lSI and co-channel interference. Thus, the error propagation problem becomes more serious, and its mitigation has to be considered when designing the receiver. In this regard, a turbo equalizer which exchanges soft information between the equalizer and the decoder has been shown to be an effective method to combat the lSI caused by …

Discrete Fiber-Reinforced Polyurea Systems For Infrastructure Strengthening And Blast Mitigation, Natalia L. Carey

Doctoral Dissertations

"The research presented in this dissertation focused on evaluating the effectiveness of various blast mitigation materials and coating technologies to be used for enhancing blast resistance of structural members. Mechanical properties and blast mitigation performance of different discrete fiber-reinforced polyurea (DFRP) systems were investigated through experimental and analytical work. Four technical papers discuss the research efforts conducted within this dissertation.

The first paper examined the development and characterization of different DFRP systems for infrastructure strengthening and blast retrofit. The behavior of various systems which consisted of chopped E-glass fibers discretely integrated in with the polyurea matrix was evaluated through coupon …

Development Of Third Generation Advanced High Strength Steels, Meghan C. Mcgrath

Doctoral Dissertations

"Lightweight duplex steels with combinations of either bainite, acicular ferrite, and austenite or martensite and austenite were investigated as third generation advanced high strength steels targeted for automotive applications. Large additions of manganese (>13 wt%) and carbon (

Duplex steels with different volume fractions of primary δ -ferrite were used to study the crystallography of austenite formed during the peritectic reaction. Solute profiles across the peritectic interface showed aluminum segregated near the interface which promoted bainitic ferrite formation. Thermal treatments were used to manipulate the concentration and type of oxides and the ferrite plate density was found to correlate …

Economics And Finance On Time Scales, Julius Severin Heim

Doctoral Dissertations

"This thesis consists of 6 papers that investigate models in economics and finance based on so-called dynamic equations on time scales. The first paper covers multiplier-accelerator models that can be described by linear second-order dynamic equations. The possibility of taxes as well as the possibility of foreign trade is taken into consideration. The second paper discusses cobweb models, which describe cyclical supply and demand in markets, where the supply is determined before the observation of the price. Cobweb models that can be formulated with first-order linear, second-order linear, and nonlinear dynamic equations are being considered. The third and fourth papers …

Experimental Investigations Of Pseudospark Discharge And Pseudospark Produced Intense Electron Beams, Jing Hu

Doctoral Dissertations

"This dissertation focuses on the pseudospark discharge, a pulsed discharge discovered for the first time in 1970's. This dissertation is prepared as three journal articles in the style used by Missouri University of Science and Technology. A high voltage pseudospark discharge experiment setup, and discharge and electron beam diagnostic system are constructed and presented in this work. Three journal articles which have been published or are under review are presented in this dissertation on various topics of the pseudospark discharge.

Paper 1 "Experimental investigation of formation time in single-gap pseudospark discharge" is focused on experimental investigations of the time-dependent characteristics …

Friction Stir Welding Of High Temperature Alloys, Jiye Wang

Doctoral Dissertations

"Friction stir welding (FSW) of Ti-6Al-4V alloy, nickel-based and iron-based oxide dispersion strengthened (ODS) alloys (MA754 and MA956) has been studied. The main aspects covered include tool evaluation, microstructural evolution, mechanical properties, and correlation between processing, microstructure and mechanical properties. Tool performance study was carried out for Ti-6Al-4V alloy with refractory tools made of W-1.1%La₂O₃ and two different grades of WC-Co based materials. The results showed that tool degradation can be attributed to mechanical and chemical interaction with processed material. The nature of tool-workpiece interaction was tool material dependent and influenced the resultant microstructure and weld quality in the stirred …

Impact Of Plug-In Hybrid Electric Vehicles On The Power Grid In A Smart Environment, Zahra Darabi

Doctoral Dissertations

This dissertation focuses on the interactions between plug-in hybrid electric vehicles (PHEVs) and the power grid. This study has used the data available through the national household travel survey (NHTS) to obtain realistic information such as the arrival time of vehicles, miles driven, and vehicles types. After data manipulation, the aggregated PHEV charging load profiles (PCLP) have been developed. The results show that the peak of PCLP overlaps with the domestic load peak. In order to alleviate this issue, several charging policies have been developed and their impacts on PCLP have been investigated. As a next contribution, the data obtained …

Identification And Visualization Of Electromagnetic Coupling Paths & Nonlinear Capacitors For Esd Protection, Hongyu Li

Doctoral Dissertations

"The first topic of this dissertation focuses on developing methods to identify and visualize electromagnetic coupling paths. The basis of the approach is to utilize an analogy between electromagnetic energy flow and fluid flow. This allows one to apply the theories and algorithms of fluid dynamics to electromagnetics and thereby to visualize the electromagnetic energy flow. This in turn can be utilized to identify the electromagnetic coupling path.

The second topic of this dissertation investigates the nonlinearity of capacitors and suggests improved trade-off between electrostatic discharge (ESD) protection and data bandwidth by using the antiferroelectric (AFE) capacitors as ESD protection. …

Influence Of Microstructural Length Scale On Deformation Behavior Of Magnesium Alloys, Wei Yuan

Doctoral Dissertations

"Friction stir processing (FSP) is emerging as an effective tool for microstructural modification. Mg-Al-Zn alloys with different aluminum contents were subjected to FSP to achieve fine grained and ultrafine grained (UFG) structure. The objective of this work was to study the influence of microstructural length scale on the governing deformation and strengthening mechanisms of FSP magnesium alloys.

FSP introduced strong basal fiber texture and processing parameter dependent grain/precipitate size and distribution. Grain refinement promoted non-basal dislocation activation at room temperature. The strength of the alloy increased as a consequence of grain refinement following classic Hall-Petch relationship to different extents due …