Digital Commons Network^™

No Reason For Complacency, Jason Hall-Spencer

School of Biological and Marine Sciences

No abstract provided.

Grid Frequency And Voltage Support Using Photovoltaic Systems With Energy Storage Assist, Ravi Bhatt

Masters Theses

"An optimized operating scheme for a grid-connected community based photovoltaic (PV) system is described. The system can participate in grid ancillary services like frequency and voltage regulation functions based on the Smart Grid framework. The proposed model comprises of a PV plant with Li-ion batteries coupled to the grid by means of a three-phase inverter. A two-way communication between the PV plant and the grid is assumed. The PV/storage plant provides constant updates on its current kW/kVar capability and the grid transmits the demand for specific amounts of power and for specific lengths of time. The battery charging energy can …

Shale Gas Rock Characterization And 3d Submicron Pore Network Reconstruction, Malek Elgmati

Masters Theses

"Determining shale gas petrophysical properties is the cornerstone to any reservoir-management practice. Hitherto, conventional core analyses are inadequate to attain the petrophysical properties of shale gas at submicron-scale. This study combines interdisciplinary techniques from material science, petrophysics, and geochemistry to characterize different shale gas samples from North America including Utica, Haynesville and Fayetteville shale gas plays. Submicron pore structure, clay mineralogy, wettability and organic matter maturation were investigated to evaluate the petrophysical properties of shale gas rocks and to determine the impact of organic and inorganic matters on wettability alteration for different fracturing fluids on shale gas rocks.

High pressure …

Inherent And Model-Form Uncertainty Analysis For Cfd Simulation Of Synthetic Jet Actuators, Daoru Frank Han

Masters Theses

"A mixed aleatory (inherent) and epistemic (model-form) uncertainty quantification (UQ) analysis method was applied to a computational fluid dynamics (CFD) modeling problem of synthetic jet actuators. A test case, (Case 3, flow over a hump model with synthetic jet actuator control) from the CFDVAL2004 workshop was selected to apply the Second-Order Probability framework implemented with a stochastic response surface obtained from Quadrature-Based Non-Intrusive Polynomial Chaos (NIPC). Three uncertainty sources were considered: (1) epistemic uncertainty in turbulence model, (2) aleatory uncertainty in free stream velocity and (3) aleatory uncertainty in actuation frequency. Uncertainties in both long-time averaged and phase averaged quantities …

The Sorption Of Chemical And Nuclear Contaminants From Soil And Water Using Nanosize Particles Of Hydroxyapatite, Chyrene Joseph

Masters Theses

"High surface area (>200 m²/g) crystals composed of nanosize (30-50nm) hydroxyapatite; (Ca₅(PO₄)₃OH) particles are being investigated as an alternative in cleaing [sic] contaminated groundwater and soil by removing toxic wastes and radionuclides. Static batch tests were carried out at 2, 4, 8, 24 and 120 hour time periods by reacting hydroxyapatite with individual solutions prepared with specific elements to evaluate the applicability of hydroxyapatite in removing potential contaminants. Chemical analyses on leachant solutions, leachate solutions, and post-reaction digested solids were conducted by Inductively Coupled Plasma-Mass Spectroscopy to determine the extent of ion removal. Removal of these ions is expected …

Design And Development Of Manufacturing Methods For Manufacturing Of Pem Fuel Cell Mea's, Nikhil Pramod Kulkarni

Masters Theses

"This thesis focuses on design and manufacturing of Fuel cell components using Additive Manufacturing techniques and then in the later part on design and manufacturing of Membrane Electrode Assembly (MEA) which is a very important component in fuel cells. Additive manufacturing methods are fast and efficient manufacturing methods which are additive building up components layer by layer instead of conventional subtractive manufacturing techniques. This ensures low cost and faster manufacturing. Additive manufacturing is important for fuel cell component manufacturing since it is important in fuel cells to minimize wastage and reduce the cost. MEA is the basis of the cost …

The Feasibility Of Using Bifidobacteria Bifidum (Atcc 700541) For The Production Of Prebiotic Oligosaccharides, Candice Marie Luehrs

Masters Theses

"Galactooligosaccharides (GOS) are prebiotics that are being used to influence intestinal microbiota towards health promoting, beneficial bacteria like bifidobacteria. Natural sources of GOS are not found in suitable levels to achieve the desired health effects so economically viable commercial production methods are important. Enzymatic conversion of lactose to GOS through transgalactosylation is a preferred method since the starting material is inexpensive and readily available. Enzymes used in batch production are purified from fungal or bacterial sources or remain in whole cells cultured for GOS production. Purified or unbound enzymes are single use whereas enzymes retained within whole cells can potentially …

Continuous Low Thrust For Small Spacecraft Proximity Operations, James Harris Meub

Masters Theses

"Recently, both DoD and NASA have demonstrated increased interest in the development of close proximity operations for space systems. AFRL's Advanced Sciences and Technology Research Institute for Astrodynamics (ASTRIA) has defined several key research topics relevant to military priorities, with one area of critical importance being the inspection and observation of low Earth orbit resident space objects (RSOs). This study investigates the feasibility of using a low-thrust cold-gas propulsion system to effectively and accurately facilitate resident space object inspection. Specifically, this study focuses on the Missouri S&T Satellite mission (M-SAT) as a means to demonstrate autonomous RSO inspection. This paper …

The Effects Select Physical Parameters Have On An Explosively Formed Projectile's Performance, Phillip R. Mulligan

Masters Theses

"Identifying how changes in the physical parameters of an Explosively Formed Projectile (EFP) affect its performance is crucial in determining what physical parameters could be changed to achieve a desired performance. This research analyzes five of the physical parameters of an EFP, similar to an Iranian design (Worsey, 2009), and the effects on performance. The five physical parameters selected for this research were charge weight, confining geometry, flyer thickness, flyer curvature, and explosives-type. Eighteen different EFP designs were used to test the penetration, measured velocity, production of a dominant projectile, and kinetic energy of these five physical parameters. Of the …

Waterjet Injection Of Powdered Activated Carbon For Sediment Remediation, Chris J. Redell

Masters Theses

"In situ sediment remediation through waterjet-activated carbon amendment delivery is an innovative means to mitigate the dangers posed by hydrophobic organic compounds. Ease of use and applicability to inundated environments makes this technique valuable. This work made feasible low-pressure injections of a 15% (by dry weight) carbon/water slurry through a pulsating piston pump waterjet. The project fabricated nozzle tips and a unique injection apparatus comprising a quantitative system for the evaluation of bench scale models. Based on a series of iterative processes, injections of carbon were analyzed for depth and concentration. Injections varied in duration and they were made into …

Study Of Turbulence-Chemistry Interaction In Hypersonic Turbulent Boundary Layers, Lian Duan, M. Pino Martín

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Studies of the turbulence-chemistry interaction (TCI) are performed in hypersonic turbulent boundary layers using direct numerical simulation (DNS) flow fields under typical hypersonic conditions representative of blunt-body and slender-body hypersonic vehicles, with super catalytic and noncatalytic wall conditions in pure air. Nondimensional governing parameters, 'interaction' Damk̈ohler number and relative heat release, are proposed to measure the influence of TCI on flow composition and temperature. Both a priori and posteriori studies are performed to assess the effect of TCI on chemical production rates and mean and turbulence flow characteristics. In addition, an effective approach (called PDF-TS) to estimate the intensity of …

Use Of Bio-Ethanol And Bio-Diesel The Key Solution For A More Sustainable Road Transport, Alberto Boretti

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Life Cycle Analysis (LCA) of alternative transportation fuels clearly shows the advantages of reducing the use of nonrenewable fossil fuels vs. renewable biologic novel fuels to reduce the emissions of carbon dioxide. Being based on the natural recycle of carbon dioxide through the use of renewable energy sources, use of these renewable fuels does not imply depletion of natural resources and is therefore sustainable in the long term. Renewable fuels and advanced internal combustion engines and powertrains are the technologies that in addition to be the most likely to produce benefits in term of carbon balance and fossil fuel saving, …

Design And Control Of A Multi-Axis Micro-Electro-Mechanical System Array For Coordinated Micro-Manipulation, Patrick Jesse White

Masters Theses

"Micro-electro-mechanical system design and implementation is a field that has received much attention over the past few decades. These robotic systems with features on the micro-scale have an unparalleled opportunity to change the way scientists interact with and understand micro and nano-scale phenomenon. Their capabilities allow experimentation that cannot be achieved with standard macro-scale equipment. Potential applications range from observing biological processes in living cells, to smart materials that automatically detect microcracks. So far, however, only a few truly successful applications have been realized. One of the most elusive goals in MEMS design is creating a system capable of coordinated …

Speech Patterns And Styles Of Young Malaysian Metrosexuals., Mohd Khushairi Tohiar

Student Works (2010-2019)

This case study attempts to examine the styles of language and patterns of speech among young Malaysian men between the ages of mid-twenties to late thirties who live and work in Kuala Lumpur and its surrounding urban areas. The subjects involved in this study are randomly selected using the definition of ‘metrosexual men’ by Simpson (1994). As there have been no studies on metrosexual language, particularly in the Malaysian context, it should be noted that this study is the first to be carried out in the context of Malaysian men. In order to analyse the subjects’ styles of language and …

The Determinants And Outcomes Of Superiors' Downward Influence Tactics And The Mediating Effects Of Subordinates' Competence And Role Ambiguity., Lee Kim Lian

Student Works (2010-2019)

Abstract NA