Digital Commons Network^™

This Week At Sbs, V.2, N.15 | This Week At Stony Brook Southampton/In The News, Darren Johnson

Southampton Announcements and News

No abstract provided.

An Overview Of Building America Industrialized Housing Partnership (Baihp) Activities In Hot-Humid Climates, Florida Solar Energy Center, Subrato Chandra

FSEC Energy Research Center®

BAIHP (www.baihp.org ) conducts systems research and technical assistance activities for new housing. Hot-humid climate efforts described here include:

Systems research: NightCool – A hybrid cooling and dehumidification strategy employing radiative cooling and desiccant materials. Interior Duct Systems in Manufactured Houses – Tests are ongoing in an occupied prototype home in Alabama and the FSEC manufactured housing lab. Ventilation and Dehumidification – A new strategy has been developed to hook up a whole-house dehumidifier so that it only runs when the air conditioning compressor is off. Plug Load Reduction – Whole house feedback devices and security system based plug load …

Energy Performance Aspects Of A Florida Green Roof, Part 2, Florida Solar Energy Center, Jeffrey Sonne

FSEC Energy Research Center®

This monitored study is an evaluation of summer and winter energy performance aspects of a green roof on a 2-story central Florida university building addition that was completed in 2005. An earlier report on this study was published through the 2006 Symposium on Improving Building Systems in Hot and Humid Climates. This report reviews these earlier results and provides second-summer results which show significant performance improvements for the green roof compared with the first summer results.

Ac System Equipment Specification, Installation And Operational Options For Improved Indoor Humidity Control, Florida Solar Energy Center, Don B. Shirey Iii

FSEC Energy Research Center®

High-efficiency home designs have significantly reduced sensible cooling loads, and some building codes and IAQ standards have begun requiring continuous outdoor ventilation air. These trends have led to an increased prevalence of high indoor humidity conditions (Rudd and Henderson 2007). This paper presents a summary of low-cost or no-cost equipment selection and operation options for conventional residential air-conditioning equipment than can result in lower indoor humidity levels. These options should be evaluated and employed to the extent possible prior to considering the added first cost and operating costs of separate dehumidification equipment.

Research Results From A Few Alternate Methods Of Interior Duct Systems In Factory Built Housing Located In The Hot Humid Climate, Florida Solar Energy Center, Neil Moyer

FSEC Energy Research Center®

The U.S. Department of Energy's (DOE) Building America Industrialized Housing Partnership (BAIHP) has collaborated with two of its industry partners to work on a portion of the project that relates to the construction and evaluation of prototype interior duct systems. In 2006, work began on a duct system design that would locate the entire length of duct work within the air and thermal barriers of the envelope. One of these designs incorporated a high-side supply register that connects to the conventional floor duct. The other design utilized a single soffit located within the conditioned space at the marriage line. The …

Transport-Based Dopant Metrology In Advanced Finfets, Gabriel P. Lansbergen, Rajib Rahman, Cameron J. Wellard, Jaap Caro, Nadine Collaert, Serge Biesemans, Gerhard Klimeck, Lloyd C. L. Hollenberg, Sven Rogge

Other Nanotechnology Publications

Ultra-scaled FinFET transistors bear unique fingerprint-like device-to-device differences attributed to random single impurities. Through correlation of experimental data with multimillion atom simulations in NEMO 3-D, we can identify the impurity’s chemical species and determine their concentration, local electric field and depth below the Si/SiO2 interface. The ability to model the excited states rather than just the ground states is the critical need. We therefore demonstrate a new approach to atomistic impurity metrology and confirm the assumption of tunneling through individual impurity quantum states.

Atomic-Layer-Deposited Al2o3/Gaas Metal-Oxide-Semiconductor Field-Effect Transistor On Si Substrate Using Aspect Ratio Trapping Technique, Y Q. Wu, M Xu, P. D. Ye, Z Cheng, J Li, J Park, J Hydrick, J Bai, M Carroll, J G. Fiorenza, A Lochtefeld

Birck and NCN Publications

High quality GaAs epilayers grown by metal-organic chemical vapor deposition are demonstrated on a SiO2-patterned silicon substrate using aspect ratio trapping technique, whereby threading dislocations from lattice mismatch are largely reduced via trapping in SiO2 trenches during growth. A depletion-mode metal-oxide-semiconductor field-effect transistor (MOSFET) is demonstrated on a n-doped GaAs channel with atomic-layer deposited Al2O3 as the gate oxide. The 10 mu m gate length transistor has a maximum drain current of 88 mA/mm and a transconductance of 19 mS/mm. The surface mobility estimated from the accumulation drain current has a peak value of similar to 500 cm(2)/Vs, which is …

Full-Band And Atomisic Simulation Of Realistic 40 Nm Inas Hemt, Mathieu Luisier, Neophytos Neophytou, Neerav Kharche, Gerhard Klimeck

Other Nanotechnology Publications

A realistic 40 nm InAs high electron mobility transistor is studied using a two-dimensional, full-band, and atomistic Schr¨odinger-Poisson solver based on the sp3d5s∗ tightbinding model. Bandstructure non-parabolicity effects, strain, alloy disorder in the InGaAs and InAlAs barriers, as well as band-to-band tunneling in the transistor OFF-state are automatically included through the full-band atomistic model. The source and drain contact extensions are taken into account a posteriori by adding two series resistances to the device channel. The simulated current characteristics are compared to measured data and show a good quantitative agreement.

From Nemo1d And Nemo3d To Omen: Moving Towards Atomistic 3-D Quantum Transport In Nano-Scale Semiconductors, Gerhard Klimeck, Mathieu Luisier

Other Nanotechnology Publications

Lessons learned in 15 years of NEMO development starting from quantitative and predictive resonant tunneling diode (RTD) to multi-million atom electronic structure modeling and the path for OMEN are laid out. The recent OMEN capabilities enable realistically large 3D atomistic nano-scale device simulation.

Impact Of Fire-Through And Misfire In Rectifier Valves On A Turbine Generator Neighboring To A Hvdc Inverter Station, Ming-Te Liang

Journal of Marine Science and Technology–Taiwan

The major purpose of this paper is the theoretical elucidation of the corrosion tube growth mechanism of mild steel occurred from the effect of pH value and oxygen corrosion at elevated pressure provided by Riggs et al. [6]. Based on the Nernst-Planck equation, continuity principle, Green's theorem, Stokes's theorem and the equation of Newton's second law of motion, the mechanism of corrosion tube development can be explained theoretically. The Bernoulli sum is contant at any cross-section of tubular corrosion product. The implication of the present results are theoretically enhanced the formation of corrosion tube mechanism.

The Study Of Price Accept Threshold For The ??Lue Highway??Tour Of The North-East Region In Taiwan, Hung-Yen Chou, Jin-Long Lu, Chiang Fu

Journal of Marine Science and Technology–Taiwan

The “Blue Highway” in the NE region of Taiwan includes the tour itineraries of Keelung-Suao, Suao-Hualien and Keelung-Hualien, each with its individual oceanic scenic features and its potential corresponding onshore scenic spots. This study explores the relationship between the “Blue Highway” tour portfolios and price attributes to collect the preference recognition of the public concerning the NE region “Blue Highway” tour itineraries and prices with the stated preference method. The utility function of the discrete choice model assumes the impact effect among attributes to be in a linear relationship plus percentages. The price threshold model improves the assumption of this …

Theoretical Elucidation On The Corrosion Tube Growth Mechanism Of Mild Steel In The Effect Of Ph On Oxygen Corrosion At Elevated Pressures, Ming-Te Liang

Journal of Marine Science and Technology–Taiwan

The major purpose of this paper is the theoretical elucidation of the corrosion tube growth mechanism of mild steel occurred from the effect of pH value and oxygen corrosion at elevated pressure provided by Riggs et al. [6]. Based on the Nernst-Planck equation, continuity principle, Green's theorem, Stokes's theorem and the equation of Newton's second law of motion, the mechanism of corrosion tube development can be explained theoretically. The Bernoulli sum is contant at any cross-section of tubular corrosion product. The implication of the present results are theoretically enhanced the formation of corrosion tube mechanism.

Case Study Of Wind-Resistant Design And Analysis Of High Mast Structures Based On Different Wind Codes, Ching-Wen Chien, Jing-Jong Jang

Journal of Marine Science and Technology–Taiwan

The high mast structure (HMS) has the characters of light weight and high cost efficiency. Therefore, it is widely used in the modern construction industry. It has a large the ratio of height (H) to least horizontal dimension (D) that makes it a particularly more slender and wind-sensitive than any other structures. Therefore, the purpose of this research is to develop the wind-resistant design (WRD) procedure for the slender, tapered support structures of HMS subjected to wind-induced excitation from vortex shedding and gust buffeting. This paper illustrates the theoretical basis and the analytical development of the WRD; including calculating gust …

Variable-Thickness Boundary Layers For Sliding Mode Control, Chyun-Chau Fuh

Journal of Marine Science and Technology–Taiwan

Sliding mode control is a nonlinear feedback control technique which provides good robustness against modeling uncertainties and external disturbances. However, as the uncertainties or disturbances increase, a greater control input is required, and the control signal may cause an undesirable chattering phenomenon. In general, the further the system trajectory from the origin, the more violent the chattering effect. However, as the trajectory moves closer to the origin, the degree of chattering gradually reduces. As a result, even if an attempt is made to eliminate chattering by introducing a small constant boundary layer around the sliding surface, the chattering phenomenon may …

Discrete-Time Output Feedback Sliding Mode Control For Uncertain Systems, Ming-Chang Pai

Journal of Marine Science and Technology–Taiwan

This paper presents a discrete-time output feedback sliding mode control to stabilize a class of linear uncertain systems in which the state is unavailable and no estimated state is required. The proposed sliding mode controller is derived to guarantee the existence of quasi-sliding mode by using output feedback only and the stability of overall closed-loop system is assured. This scheme ensures the robustness against parametric uncertainties and disturbances. Neither chattering phenomenon will occur nor the knowledge of upper bound of uncertainties is required. Simulation results demonstrate the efficacy of the proposed control methodology.

The Manpower Supply Planning And Shift Setting For Mass Rapid Transit Carriage Maintenance In Short-Term Operations, Shangyao Yan, Chia-Hung Chen, Miawjane Chen

Journal of Marine Science and Technology–Taiwan

An effective carriage maintenance plan cannot only reduce the mass rapid transit system operating costs, but is also directly related to its safety and schedule punctuality. Traditionally, the arrangement of the carriage maintenance manpower supply has been based on staff experience, and has been performed manually following simple rules. This is not only time-consuming but often ineffective. Therefore, in this research, we incorporate flexible management strategies, different combinations of principles, and the related operating constraints, to develop a basic carriage maintenance manpower supply plan model. Furthermore, we construct an integrated model by modifying the basic model, which can help an …

Cityland – Vol. 5, No. 11, Center For New York City Law

CityLand - 2008

The December 2008 issue of CityLand covers significant land use and legal developments in New York City. Highlights include the City Council’s approval of the East Village/Lower East Side rezoning and the controversial Willets Point Redevelopment Plan, both with concessions on affordable housing and community engagement. The issue also reports on the approval of the Hunter’s Point South waterfront development and the Via Verde affordable housing project in Melrose, Bronx. Landmark coverage includes the designation of NYU’s Silver Towers and the Prospect Heights Historic District, as well as criticism of the South Street Seaport redevelopment proposal. Legal decisions include the …

Search For The Higgs Boson Produced In Association With Z→ℓ+ℓ- In Pp̄ Collisions At S=1.96tev, T. Aaltonen, J. Adelman, T. Akimoto, M. G. Albrow, B. Álvarez González, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, A. Apresyan, T. Arisawa, A. Artikov, W. Ashmanskas, A. Attal, A. Aurisano, F. Azfar, P. Azzurri, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, V. Bartsch, G. Bauer, P. H. Beauchemin, F. Bedeschi, P. Bednar

Faculty Publications

We present a search for the Higgs boson in the process qq̄→ ZH→ℓ+ℓ-bb̄. The analysis uses an integrated luminosity of 1fb-1 of pp̄ collisions produced at s=1.96TeV and accumulated by the upgraded Collider Detector at Fermilab (CDF II). We employ artificial neural networks both to correct jets mismeasured in the calorimeter and to distinguish the signal kinematic distributions from those of the background. We see no evidence for Higgs boson production, and set 95% C.L. upper limits on σZHB(H→bb̄), ranging from 1.5 to 1.2 pb for a Higgs boson mass (mH) of 110 to 150GeV/c2. © 2008 The American Physical …

Measurement Of The Single-Top-Quark Production Cross Section At Cdf, T. Aaltonen, J. Adelman, T. Akimoto, M. G. Albrow, B. Álvarez González, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, A. Apresyan, T. Arisawa, A. Artikov, W. Ashmanskas, A. Attal, A. Aurisano, F. Azfar, P. Azzurri, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, V. Bartsch, G. Bauer, P. H. Beauchemin, F. Bedeschi, P. Bednar

Faculty Publications

We report a measurement of the single-top-quark production cross section in 2.2fb-1 of pp̄ collision data collected by the Collider Detector at Fermilab at s=1.96TeV. Candidate events are classified as signal-like by three parallel analyses which use likelihood, matrix element, and neural network discriminants. These results are combined in order to improve the sensitivity. We observe a signal consistent with the standard model prediction, but inconsistent with the background-only model by 3.7 standard deviations with a median expected sensitivity of 4.9 standard deviations. We measure a cross section of 2.2-0.6+0.7(stat+syst)pb, extract the Cabibbo-Kobayashi-Maskawa matrix-element value |Vtb|=0.88-0.12+0.13(stat+syst)±0.07(theory), and set the limit …

Search For Supersymmetry In Pp Collisions At S=1.96tev Using The Trilepton Signature For Chargino-Neutralino Production, T. Aaltonen, J. Adelman, T. Akimoto, M. G. Albrow, B. Álvarez González, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, A. Apresyan, T. Arisawa, A. Artikov, W. Ashmanskas, A. Attal, A. Aurisano, F. Azfar, P. Azzurri, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, V. Bartsch, G. Bauer, P. H. Beauchemin, F. Bedeschi, P. Bednar

Faculty Publications

We use the three lepton and missing energy trilepton signature to search for chargino-neutralino production with 2.0fb-1 of integrated luminosity collected by the CDF II experiment at the Tevatron pp collider. We expect an excess of approximately 11 supersymmetric events for a choice of parameters of the mSUGRA model, but our observation of 7 events is consistent with the standard model expectation of 6.4 events. We constrain the mSUGRA model of supersymmetry and rule out chargino masses up to 145GeV/c2 for a specific choice of parameters. © 2008 The American Physical Society.

Assessment Of The Effectiveness And Energy Efficiency Of Humidity Control Approaches In Vacant Florida Homes, Florida Solar Energy Center, James Cummings

FSEC Energy Research Center®

In a hot and humid climate such as Florida, 'snowbirds' that leave their homes for extended summer periods need guidance on effective and energy efficient methods of humidity control. Experiments were performed in seven residences to evaluate various approaches to humidity control, including providing no mechanical system control. A humidity target was identified to maintain indoor relative humidity (RH) at 65% or lower most of the time. Providing no mechanical conditioning (letting the building 'float') yields relative humidity at 65% or below during hot and sunny weather in some homes, but not during cloudy weather. Setting the AC system thermostat …

Civil Engineer, Research Group Spotlighted In December Issue Of Emi Online Newsletter, Admin

University of Mississippi News

No abstract provided.

The Diffusion Of Innovative Technologies Among Elementary And Middle School Teachers: Examining The Relationship Between Access To Social Capital And Level Of Technology Adoption, John Patrick Bayerl

Master's Theses and Doctoral Dissertations

The purpose of this study was to examine the relationship between public school elementary and middle school teachers’ access to social capital (the independent variable) and their level of adoption of innovative technologies (the dependent variable). The study was founded on both diffusion of innovations and social network theory.

Study participants were teachers from three schools, sharing two buildings in a single school district. The initial phase of the research involved informal interviews with key policy makers from each school, conducted for the purpose of identifying innovative technologies present at each study site. An existing survey instrument was …

Sediment Transport Rate-Based Model For Rainfall-Induced Soil Erosion, Zhi Qiang Deng, João L.M.P. De Lima, Hoon Shin Jung

Faculty Publications

A one-dimensional mathematical model, termed sediment transport rate-based model, is developed for determining rainfall-induced soil erosion and sediment transport. The model is comprised of (1) the kinematic-wave equation for overland flow, (2) a transport rate-based advection equation for rainfall-induced soil erosion and sediment transport, and (3) a semi-Lagrangian algorithm for numerical solution of the soil erosion and sediment transport equation. A series of soil flume experiments under simulated rainfalls were conducted to simulate the overland flow and sediment transport and to test the sediment transport rate-based model. Numerical results of sediment transport rate-based model indicate that (i) hydrographs display an …

Meeting Of The Federal Open Market Committee On December 15– 16, 2008, Federal Reserve System: Board Of Governors: Federal Open Market Committee (Fomc)

Documents

A joint meeting of the Federal Open Market Committee and Board of Governors of the Federal Reserve System was held in the offices of the Board of Governors in Washington, D.C., on Monday, December 15, 2008, at 2:00 p.m., and continued on Tuesday, December 16, 2008, at 9:00 a.m.

Study On Mechanical Properties Of A356 Alloys Enhanced With Preformed Thixotropic Structure, Shueiwan H. Juang, Shyh-Ming Wu

Journal of Marine Science and Technology–Taiwan

A preformed A356 alloys with thixotropic structure (designated SSM-A356) was systematically studied on mechanical properties in order to establish the database for further investigations in forming and heat treatment. Because of the specific microstructure and characteristics, the heat treatment conditions of SSM-A356 were explored through the observations of microstructure and the measurement of micro-hardness. In the investigation of heat treatment, it was observed that the eutectic silicon was refined and spheroidized which is unlikely for conventional processing. The mechanical testing results showed that the yield and ultimate tensile strength of SSM-A356 were respectively around 115% and 34% greater than those …

Assessment Of Ground Shaking In Ilan County, Taiwan, Hui-Mi Hsu, Sao-Jeng Chao, Howard Hwang

Journal of Marine Science and Technology–Taiwan

This paper presents an estimation of ground shaking intensity in the Ilan area caused by two scenario earthquakes. On the basis of seismic activity in the study area, the seismic zones, including Okinawa trough seismic zone section A and Suao-Hualien offshore seismic zone are established. The earthquakes occurring in these two zones are considered as the scenario earthquakes. The hundreds of boring logs are also collected and classified into three site classes as specified in the Taiwan Seismic Building Code. The intensity of ground shaking in the Ilan area caused by a scenario earthquake is then estimated by using an …

The Development Of Hyaluronic Acid Biomaterials For Vascular Tissue Engineering, Samir Ibrahim

All Dissertations

Current vascular implant materials poorly interact with medial smooth muscle cells (SMCs) allowing the permanent loss of vascular elastin, eliminated by trauma or disease, a crucial element in maintaining the natural biomechanics of the blood vessel and overall vascular homeostasis. In addition, these materials insufficiently recruit vascular endothelial cells (ECs) to form a normally functional, confluent endothelium that acts as the interface between the blood and vascular tissue and regulates numerous vital vascular processes. As a result, the restenosis, or re-occlusion, rate within these devices has remained fairly high stimulating the investigation of numerous new materials capable of providing the …

Energy Impacts Of Various Residential Mechanical Ventilation Strategies, Florida Solar Energy Center, Robin Vieira

FSEC Energy Research Center®

The Building America program has been working with home builders for more than a decade using a variety of strategies for bringing fresh air into the homes. Many of these strategies utilize the central air handler fan from the HVAC system to ventilate when the system runs. Controllers can be purchased to force the air to enter for minimum periods of time or to shut off outside air dampers after some period of runtime. EnergyGauge USA, a detailed hourly residential simulation program, has been modified to simulate the various runtime strategies, as well as supply- or exhaust-only ventilation strategies and …

Case Study Of An Innovative Hvac System With Integral Dehumidifier, Florida Solar Energy Center, Richard Raustad

FSEC Energy Research Center®

In most applications, heating, ventilating, and air conditioning (HVAC) equipment is controlled to maintain an indoor dry-bulb set point temperature. Moisture removal by the HVAC system is considered to be an operational byproduct. During summer months, the operation of the HVAC system is usually sufficient to meet both the sensible and latent cooling loads. However, during other times of the year when sensible loads are reduced, the moisture load can be significantly higher than the available moisture removal capacity of the air conditioning system. This can lead to elevated indoor relative humidity levels and an uncomfortable indoor environment. In many …