Digital Commons Network^™

The Collegian (2005-11-28), José Borjón

UTB/TSC Archives - The Collegian [Newspaper]

Vol. 58, No. 14

Central Florida Future, Vol. 38 No. 29, November 28, 2005

Central Florida Future

Professors sound-off on bird flu: Possible pandemic has scientists, health officials, politicians scrambling for a plan; Students helping each other break out their fancy feet: Recently formed Ballroom Dancing club growing fast; Union's ticket sales heat up: Students spend hours in line for inaugural Conference USA title game; Daily Show laces laughs with event knowledge.

Massachusetts Marine Trades Workforce Assessment 2005, Dan Hellin

Urban Harbors Institute Publications

In 2005, a partnership between the South Coastal Workforce Investment Board, the Massachusetts Marine Trades Association, Massasoit Community College and the Urban Harbors Institute (UHI) of the University of Massachusetts Boston, developed and distributed a survey focused on the status, needs and future challenges faced by marine businesses in the South Coastal region of Massachusetts. The Urban Harbors Institute analyzed the responses and prepared this report to present the results.

The overall aims of the 2005 Marine Trades Workforce Assessment Survey were: to determine the extent of the marine industry’s labor needs in the South Coastal region of Massachusetts; to …

University Of Northern Iowa Faculty Senate Meeting Agenda, November 28, 2005, University Of Northern Iowa. Faculty Senate.

Documents - Faculty Senate

Meeting agenda from the Faculty Senate of the University of Northern Iowa.

University Of Northern Iowa Faculty Senate Meeting Minutes, November 28, 2005, University Of Northern Iowa. Faculty Senate.

Documents - Faculty Senate

Meeting minutes from the Faculty Senate of the University of Northern Iowa.

Vol. 29, No. 13 (November 28, 2005)

Indiana Law Annotated

No abstract provided.

Iwu Chapel Hour Of Contemporary Christian Music, Meg Dubuque

News and Events (Discontinued Series)

No abstract provided.

2005-06 Faculty Senate - November 28, 2005 Minutes Summary, Faculty Senate

Faculty Senate Agendas & Minutes

No abstract provided.

Ferroelectric Switch For Spin Injection, Mikhail Ye. Zhuravlev, Sitaram Jaswal, Evgeny Y. Tsymbal, Renat F. Sabirianov

Materials Research Science and Engineering Center: Faculty Publications

A method for the switching of the spin polarization of the electric current injected into a semiconductor is proposed, based on injecting spins from a diluted magnetic semiconductor through a ferroelectric tunnel barrier. We show that the reversal of the electric polarization of the ferroelectric results in a sizable change in the spin polarization of the injected current, thereby providing a two-state electrical control of this spintronic device. We also predict a possibility of switching of tunneling magnetoresistance in magnetic tunnel junctions with a ferroelectric barrier and coexistence of tunneling magnetoresistance and giant electroresistance effects in these multiferroic tunnel junctions.

Crystal Gayle To Perform Dec. 6 At Ford Center, Staff Report

University of Mississippi News

OXFORD, Miss. - Grammy-award winning singer Crystal Gayle performs a holiday concert Dec. 6 at the University of Mississippi's Gertrude C. Ford Center for Performing Arts.

Conference Dec. 2-3 To Focus On Visions Of Gulf Coast Rebuilding, Rebecca Lauck Cleary

University of Mississippi News

OXFORD, Miss. - Although the waters from Hurricane Katrina have receded, damage to the Gulf Coast presents myriad challenges toward economic and social recovery.

Ferroelectric Switch For Spin Injection, Mikhail Y. Zhuravlev, Sitaram Jaswal, Evgeny Y. Tsymbal, Renat F. Sabirianov

Physics Faculty Publications

A method for the switching of the spin polarization of the electric current injected into a semiconductor is proposed, based on injecting spins from a diluted magnetic semiconductor through a ferroelectric tunnel barrier. We show that the reversal of the electric polarization of the ferroelectric results in a sizable change in the spin polarization of the injected current, thereby providing a two-state electrical control of this spintronic device. We also predict a possibility of switching of tunneling magnetoresistance in magnetic tunnel junctions with a ferroelectric barrier and coexistence of tunneling magnetoresistance and giant electroresistance effects in these multiferroic tunnel junctions.

Frbny Citibank European Structured Credit Derivatives Target Exam From October 31 To November 18 2005, Federal Reserve System: Federal Reserve Bank Of New York

Documents

No abstract provided.

Solid Oxide Fuel Cells-Materials And Prospects, Molenda Janina, Marzec Jacek

Journal of Electrochemistry

The paper summarizes and discusses the basic properties of solid oxide fuel cell (SOFC) components (electrode materials and electrolyte) from the point of view of their essential functional parameters suck as chemicalstability, transport, catalytic and thermomechanical properties under operational conditions in a SOFC. An interrela-tion between the defect structure of these materials related to oxygen nonstoichiometry and their electronic propertiesand catalytic activity was shown. Single-chamber fuel cell concept was also presented.

The Optimal Sulfonation Conditions Of Self-Doped Polyaniline Obtained By Using Experimental Strategies, Wen-Yar Li, Chi-Chang Hu

Journal of Electrochemistry

The optimal sulfonation condition of self-doped sulfonated polyaniline (prepared from leucoemeraldinebase; denoted as LEB-SPANI) with a high electronic conductivity was obtained by experimental strategies, includingthe fractional factorial design (FFD) and central composite design (CCD). From the FFD experiment, the self-doped LEB-SPANI prepared at a lowtemperature (4℃), a short reaction time (1 h), and a small volume of fumingsulfuric acid (10 mL) showed a better conductivity (ca.127 mS/cm). In the CCD study coupled with a confirmationtest, the highest conductivity (ca.141 mS/cm) of the LEB-SPANI film was obtained under a sulfonation temperatureof 4℃, a sulfonation time of 75 minutes, and a volume …

A Study Of Three Corrosion Inhibitors For Reinforcing Steel In Sps Solution By Electrochemical Methods, Bing Zhao, Rong-Gui Du, Chang-Jian Lin

Journal of Electrochemistry

Some electrochemical techniques such as linear polarization,electrochemical noise and EIS have been employedto study the inhibition behavior of N-lauroyl sarcosinate, β-sodium glycerophosphate and D-sodium gluconate for the reinforcing steel immersed in simulated concrete pore solution(SPS) with NaCl addition.The results show that D-sodium gluconatehas an obvious inhibitive effect for the reinforcing steelin containing Cl^- SPS solution. It has been proposed that the corrosion inhibition of D-sodium gluconate is due to its competitive adsorption and precipitation on steel surface in the simulated concrete environment.

An Investigation On Poly(Vinyl Chloride-Co-Isobutyl Vinyl Ether) Coatings Modified By Rutile Nano-Tio2 Pastes, Xiang Bin, Sheng-Tao Zhang, Yan Li, Bao-Rong Hou

Journal of Electrochemistry

The anti-corrosion coating of Poly(Vinyl Chloride-Co-Isobutyl Vinyl Ether) (PVCCIVE) was modified by rutile nano-TiO₂. The influence of nano-TiO₂ pastes on the coating's corrosion resistance was investigated through electrochemistry impedance spectroscopy (EIS). The results show that the addition of nano-TiO₂ pastes does not have obvious effect on the coating's performance of adhesion, flexility, impact resistance, but improves the coating's UV resistance and the gloss.Meanwhile,with the proper addition of rutile nano-TiO₂ pastes, the anti-corrosion behavior of the coating was advanced.

Copper Electrodeposition Under The Perturbation Of Hard Particles, Zeng-Wei Zhu, Di Zhu

Journal of Electrochemistry

Copper electrodepositon was carried out on the rotating cathode,with hard particles(such as ceramic beads) filling between the electrodes. The rotation of cathode led hard particles to polish and impact the surface of deposit during electrodeposition.Copper deposits with a mass of cuspidal nodules were produced in acid sulfate solutions while brittle deposits without nodules were produced in alkaline sulfate solutions. It was also found that brightening and smoothing deposit could be obtained from the alkaline solution, and the deposit was approximatively disordered orientation with granular morphology of about 100~300 nm. The results show that the polishing and impact of hard particles …

Silicides And Composites Materials As Anodes For Lithium Ion Batteries, Jun-Mei Yan, Hui-Zhen Huang, Jing Zhang, Yong Yang

Journal of Electrochemistry

The anode materials of Mg₂Si and MnSi were synthesized by mechanically activated annealing(MAA) techniques in this work and the in electrochemical performances were also studied.A series of composite materials of Mg₂Si and CNTs or CMS were prepared by ball-milling method respectively. The reversible capacities of the composites were higher than that of the pure Mg₂Si and pure carbon materials.The cyclic performances have been improved greatly by ball-milling of the Mg₂Si and carbon materials. Results show that ball-milling method is one kind of method to make alloy materials into practical use.

Electrochemical Disinfection Method To Treat Wastewater From Hospitals, Zhi-Fu Li, Ya-Dong Tan, Ning Xu, Shao-Hong Ren, Yu Zhao

Journal of Electrochemistry

Electrochemical disinfection method was used to treat wastewater from hospitals. The mechanism of electrochemical disinfection was researched by using the different anode materials. The results showed that when the titanium coated with noble metal (Ru, Pt, Ir)oxide was used as an anode and stainless steel as a cathode, the current density was 6 mA/cm², hydraulic retention time was 15 min,air flow rate was 40 L/h, the rate of anode effective area to the inner water volume was 1.0, the amount of total colibacillus was below 500 CFU/L after electrochemical disinfection,All these meet the first order of Effluent Discharge …

A Continuous Operation For Electroreduction Of Oxalic Acid To Glyoxylic Acid, Xiao-Hui Hu, Xiang-Fei Yan, Yu-Zhong Su, Jun Li, Qing-Biao Li

Journal of Electrochemistry

A simulative-continuous-operation approach was proposed to study the continuous operation for electroreduction of oxalic acid to gloxylic acid using a packed bed reactor and a parallel reactor with cooled cathode in order to solve the low productivity problem in current state by using traditional reactor. The effects of the concentration of oxalic acid and temperature on this process were also studied. Results showed that,after 30min of the reaction(residence time), the mass fraction of the produced glyoxylic acid in the catholic solution could reach 3.76% and 3.66% with respect to a saturated oxalic acid method and a step-temperature decreasing method. From …

The Mechanism Of Ethylenediamine On Electroless Ni-B Alloy Deposition, Sen-Lin Wang

Journal of Electrochemistry

The effects of ethylenediamine stabilizer on the deposition rate and on the stability of the plating bath for electroless deposition of Ni-B alloy were investigated. It was found that the addition of ethylenediamine greatly enhances the stability of the electroless plating bath. The electrochemical polarization including cathodic and anodic polarizations measurements were carried out to examine the effect of ethylenediamine on the deposition process. The results show that ethylenediamine affects both the cathodic and the anodic polarization processes. The oxidation current of the reducer and the reduction current of Ni-B alloy decrease greatly when ethylenediamine was added into the plating …

Electrochemical Performance Of Li3.22Na0.569Mn5.78O12.0, Qing-Song Tong, Yong Yang, Jin-Ming Lian

Journal of Electrochemistry

By selecting LiOH·H₂O and Mn(CH₃COO)₂·2H₂O as starting-materials, the positive materials with the structure characterization of Li₄Mn₅O₁₂ and composition of Li_3.22Na_0.569Mn_5.78O_12.0 were prepared by two-phase sintering method consisted of microwave and solid-state sintering processes. XRD patterns data showed that a pure Li₄Mn₅O₁₂ phase was obtained by the fore-treatment of microwave sintering and the post-treatment of the solid-state sintering at 380℃. The charge-discharge tests showed that the newly prepared sample exhibited an initial capacity of 132 mAh·g …

Electrochemical Controllable Preparation Of Hydroxyapatite Coating With Different Morphologies And Preliminary In Vitro Tests, Hai-Yan Shi, Ren Hu, Chang-Jian Lin

Journal of Electrochemistry

The Controllable electrochemical deposition has been developed to prepare the hydroxyapatite(HA) coatings on Ti substrate with different morphologies and structures. Three kinds of typical topography of HA coatings, i.e. standing-up, flower and ordered porous structures have been obtained. The XRD and FTIR results demonstrate high crystallinity of the coating and exclusion of other forms of calcium phosphates. In vitro tests reveal that the biological property is largely dependent on the structure and morphology of the HA coating. It has been found that all pure HA coating show good biocompatibilities, while only the HA coating with ordered porous structures exhibits best …

Electrochemical Oxidation Of Organic Additives In Tin Plating Electrolytes, Yin-Mei Cheng, Lan-Kun Cai, Qiang Song

Journal of Electrochemistry

Cyclic voltammetry(CV) was used to characterize the voltammetric behaviours of organic additives, e.g. PSA(phenolsulfonic acid) EN(ethoxylatedα-naphthol) and ENSA(ethoxylatedα-naphthol sulfonic acid), on the anode surface. In PSA solutions, an anodic peak was obtained and the peak potential was about 1.2V. In EN and ENSA solutions, two anodic peaks were obtained and the peak potentials were about(0.95V) and 1.3V. The products of galvanostatic electrolysis were separated by HPLC(high performance liquid chromatography) and analyzed by EI/MS(electron ionizing mass spectrometry). The mechnism of the electrochemical oxidation was also disussed.

November 28, 2005 Aasu Faculty Meeting Minutes, Armstrong Atlantic State University

Armstrong Faculty Senate: Minutes (Archived)

November 28, 2005 Armstrong Atlantic State University Faculty Meeting Minutes

Chamber Ensembles, Department Of Music, University Of Richmond

Music Department Concert Programs

No abstract provided.

Interior Node Projection Techniques In Sweeping Algorithms, Michael Andrew Scott

Theses and Dissertations

The enhancement of node projection techniques in sweeping is the subject of this thesis. Sweeping is a method used to produce all-hexahedral finite element meshes on certain classes of geometry. The placement of nodes in the interior of the geometry during the sweeping process remains a difficult problem. This thesis presents advancements in this area which improve the speed of the algorithm and the resulting element quality. A comparison of existing projection methods was performed. The existing Faceted projection sweeping method was extended to be applicable to more general classes of sweepable geometry. This comparison and extension of node projection …

Ipsative Score Distortion On Affinity 2.0, Alec J. Brown

Theses and Dissertations

This study investigated distortion that occurs when raw scores are converted to ipsative scores on Affinity 2.0, a relatively new instrument for assessing sexual interest. Using a sample of 146 non-offending, heterosexual females, this study examined the characteristics of distorted ipsative score profiles and attempted to develop an algorithm to identify such distortions. A method was developed for defining distortion objectively. Of the 146 profiles,125 were found to contain some degree of distortion. Several hypotheses were formulated as to variables that might be related to distortion. These relationships were examined using Pearson Product Moment Correlations. Several statistically significant, but weak, …

A Gasless Method Of Spraying Thermoplastic Resin, Dan T. Rogers

Theses and Dissertations

This spraying method for thermoplastic resins is a new manufacturing process for applying thermoplastics to a mold or surface in an efficient way that has the potential of reducing cycle time. Spraying thermoplastic resins is similar to spraying other polymers, such as paint, with the differences being higher pressure and temperature. This method uses an injection molding machine with a modified nozzle to spray the plastic material. In this study, temperature, pressure, and nozzle size were factors that influenced the success of this spraying method. The method of spraying in this study proved spraying without a gas is possible, a …