Open Access. Powered by Scholars. Published by Universities.®

Digital Commons Network™

Open Access. Powered by Scholars. Published by Universities.®

Theses and Dissertations

Discipline
Institution
Keyword
Publication Year
File Type

Articles 63211 - 63240 of 74327

Full-Text Articles in Entire DC Network

A System Dynamics Approach To Modelling The Degradation Of Biochemical Oxygen Demand In A Constructed Wetland Receiving Stormwater Runoff, Leslie A. Mudgett Dec 1995

A System Dynamics Approach To Modelling The Degradation Of Biochemical Oxygen Demand In A Constructed Wetland Receiving Stormwater Runoff, Leslie A. Mudgett

Theses and Dissertations

The objective of this research was to develop a tool to aid the Air Force Environmental Manager in the identification of the design parameters of a constructed wetland system that may be optimized to provide a desired biochemical oxygen demand (BOD) removal efficiency during the treatment of Air Force stormwater runoff. The objective is achieved through the development and use of a system dynamics model which simulates the hydrological functions of a constructed wetland as well as the processes within the wetland responsible for degradation of BOD. Based on literature review, the primary mechanism responsible for the degradation of BOD …

Go to article

Modified Model For Transient Response Of Mrna Synthesis To Magnetic Field Exposure, Timothy W. Crosnoe Dec 1995

Modified Model For Transient Response Of Mrna Synthesis To Magnetic Field Exposure, Timothy W. Crosnoe

Theses and Dissertations

It is a well-known fact that high frequency, or radio frequency, radiation can be directly harmful to biological tissue. The radiation frequencies to which humans are most exposed, however, are the extremely low frequencies, or ELFs. To date there has been no definitive measure for predicting the ability of low frequency electromagnetic radiation to cause adverse biological effects. Two specific measures, average magnetic field and kinetic index, have been used in studies to determine if they are useful predictors of adverse effects, specifically leukemia. Unfortunately, both have shown only marginal results. This thesis analyzed and improved the kinetic index measure …

Go to article

A Case Study Of The Environmental Impacts Of The Beddown Of The C-17 Globemaster Iii At Charleston Afb, Richard H. Houghton Jr. Dec 1995

A Case Study Of The Environmental Impacts Of The Beddown Of The C-17 Globemaster Iii At Charleston Afb, Richard H. Houghton Jr.

Theses and Dissertations

Unites States Air Force acquisition environmental planning has changed significantly since the passage of the National Environmental Policy Act in 1969. This research examined the role of environmental planning in weapon system acquisition. It focused on environmental planning performed for the C-17 Globemaster III prior to its beddown at Charleston Air Force Base. The case study of the C- 17 beddown included interviews, archival record reviews, and direct observations at the base. Evidence was collected to determine what environmental impacts occurred during the beddown. An environmental postaudit compared actual impacts with those predicted in environmental planning documentation. Impacts were analyzed …

Go to article

Velocity Determination For An Inverted Pseudolite Navigation Reference System, Jeffrey M. Hebert Dec 1995

Velocity Determination For An Inverted Pseudolite Navigation Reference System, Jeffrey M. Hebert

Theses and Dissertations

As navigation systems continue to improve in performance and features, the Air Force must develop better Navigation Reference Systems (NRS) to keep pace with technology. Specifically, with the advent of enhanced, integrated Global Positioning System (GPS) and Inertial Navigation System (INS) navigators, emphasis is placed on the measuring performance in the presence of GPS jamming. To meet these needs, a new NRS, dubbed the Sub-Meter Accuracy Reference System (SARS), is being developed by the 746th Test Squadron, Holloman AFB, New Mexico. SARS uses a unique, inverted GPS pseudolite positioning system to determine a reference trajectory. This research investigates two post …

Go to article

Comparison Of The Ralph Smith And The Time Domain Flying Qualities Criteria, Lori A. Carlucci Dec 1995

Comparison Of The Ralph Smith And The Time Domain Flying Qualities Criteria, Lori A. Carlucci

Theses and Dissertations

Aircraft pitch response is a crucial element of piloted vehicle flying qualities. The short term pitch response has created controversy over the form and substance of any requirements. Currently there are six different methods for evaluation in MIL-STD-1797A. There are many other methods which have been proposed. The biggest problem is that many of these methods often give conflicting results. The overall goal of the present effort is to compare and contrast the Time Domain criterion and the Ralph Smith criterion. By examining these methods on common grounds, areas of agreement and discrepancies can be found. Parametric studies are performed …

Go to article

Bioremediation: Factors Influencing Metal Ion Toxicity In A Toluene Selected Bacterial Population, Scott D. Hansen Dec 1995

Bioremediation: Factors Influencing Metal Ion Toxicity In A Toluene Selected Bacterial Population, Scott D. Hansen

Theses and Dissertations

This research was a general phenomenalistic overview of the effects of metals on the respiration rates of a toluene selected microbe culture. The metals studied were copper, zinc, cobalt, manganese and iron. Relative inhibition, Cu>Fe>Zn=Co>Mn, corresponded to hydrogen phosphate binding strengths. Inhibition was found to be pH dependent; it increased with increasing pH and was shown to correlate to an increased adsorption of metal onto the cell. Zn, Cu, and Co toxicities were shown to decrease with increasing magnesium concentrations. This decrease was linked to increased magnesium adsorption and decreased metal adsorption. The magnitude of effect was …

Go to article

Systems Analysis Of Gps Electrical Power System Redesign, Kevin J. Walker Dec 1995

Systems Analysis Of Gps Electrical Power System Redesign, Kevin J. Walker

Theses and Dissertations

A systematic analysis is applied to the electrical power subsystem of the Global Positioning Satellite (GPS) system. Results determined the most appropriate power source and conversion system Options. Photovoltaic solar arrays, the current power system, were not included in the analysis. The best electrical power subsystem options found in the analysis include a solar power source with either a dynamic or direct conversion technique, and a direct conversion nuclear source. The two solar options are designed, at a low level of detail, to provide the same level of power the current GPS photovoltaic solar array system provides. These two designs …

Go to article

A Solid Surface From Which To Explore: The Executive Summary As The Frontispiece Of A Technical Hyperdocument, Alicia M. Williams Dec 1995

A Solid Surface From Which To Explore: The Executive Summary As The Frontispiece Of A Technical Hyperdocument, Alicia M. Williams

Theses and Dissertations

This research analyzes the purpose and organization of a well-written executive summary, reviews the characteristics of hypermedia, and compares the strengths and weaknesses of a typical executive summary published originally on paper and now under consideration for transition to hypermedia in order to determine which elements of an executive summary are essential before effective transition to hypermedia. The executive summary of a technical report is a stand-alone description of what was done, how it was done, what the results were, why they matter, and where further information is found in the report body. Executive summaries have a wider audience than …

Go to article

Neutron Damage In Distributed Bragg Reflectors And Microcavity Lasers, Mark A. Suriano Dec 1995

Neutron Damage In Distributed Bragg Reflectors And Microcavity Lasers, Mark A. Suriano

Theses and Dissertations

Distributed Bragg Reflectors (DBRs) grown on a gallium-arsenide substrate for a solid state mirror and a vertical cavity surface emitting laser (VCSEL) were subjected to a neutron fluence to determine the sensitivity of the DBRs. The samples were irradiated at Ohio State University's 500 kW research reactor. Relative and absolute reflectance measurements were taken before and after each irradiation over a spectral band of 530 880 µm. Relative reflectance measurements showed that the irradiation did not cause any spectral shift over seven decades of neutron fluences. The reflectivity of the DBRs decreased from their initial measurements after being irradiated. The …

Go to article

Identification Of Molecular Laser Transitions Using The Finite Element Method, Matthew C. Smitham Dec 1995

Identification Of Molecular Laser Transitions Using The Finite Element Method, Matthew C. Smitham

Theses and Dissertations

This thesis is a continuation of a previous effort which developed a finite element solution of Schrodinger's Equation. The purpose of this research is to extend this previous work, and develop a chemical laser engineering tool for the identification of transition lines. Identification of laser transitions for a new chemical gain medium requires knowledge of Einstein's Coefficients. These transitions rates can be obtained by solving Schrodinger's Equation for diatomic molecules using the method of finite elements. Experimental vibrational eigenvalues for a given electronic state are used to determine the molecular potential surface which yields the closest numerical result. A non-linear …

Go to article

An Analysis Of 1994 Air Force Toxic Release Inventory Reporting, Brian A. Pollock Dec 1995

An Analysis Of 1994 Air Force Toxic Release Inventory Reporting, Brian A. Pollock

Theses and Dissertations

The purpose of this research is to analyze the Air Force's 1994 Toxic Release Inventory data. Statistical tests were used to meet the following research objectives: (1) review the CY 94 data to determine which chemicals were most often reported and which bases and major commands had the most releases in terms of the number of chemicals reported and the amount of chemicals reported and (2) investigate factors which could influence the reporting status of a facility. An analysis of the TRI data showed that dichloromethane was the chemical released in the largest amount while methyl ethyl ketone was the …

Go to article

Electrical Characterization Of 4h-And 6h-Silicon Carbide Schottky Diodes, Jeffrey C. Wiemeri Dec 1995

Electrical Characterization Of 4h-And 6h-Silicon Carbide Schottky Diodes, Jeffrey C. Wiemeri

Theses and Dissertations

The electrical properties of silicon carbide (SiC) make it an excellent candidate for use in high temperature/high power devices due to its wide bandgap, high breakdown field, high electron mobility, etc. In this work two Schottky diodes of platinum (Pt) on n-type carbon faced 4H-SiC and three Schottky diodes of nickel (Ni) on n-type silicon faced 6H-SiC were electrically characterized. The diodes exhibited good performance up to 698 K for both the forward and reverse (up to -100v) bias voltages. The barrier heights measured by I-V-T tests were found to be 0.32 and 0.61 eV for the Pt/4H-SiC samples, but …

Go to article

Binary Gas Mixture Analysis With An Interdigitated Gate Electrode Field Effect Transistor (Igefet) Microsensor, John M. Wiseman Dec 1995

Binary Gas Mixture Analysis With An Interdigitated Gate Electrode Field Effect Transistor (Igefet) Microsensor, John M. Wiseman

Theses and Dissertations

Single component and binary gas mixtures of nitrogen dioxide (NO2) and ammonia (NH3) were analyzed with a microsensor composed of an array of interdigitated Gate Electrode Field Effect Transistor (IGEFET) sensor elements coated with copper-, nickel-, and cobalt-phthalocyanine thin films. Improvements in the IGEFET microsensor design and operation facilitated simultaneous measurement of ihe direct current (DC) and alternating current (AC) electrical response of the metal-substituted phthalocyanine (MPc) films to challenge gas exposure. A finite-difference model of the interdigitated gate electrode (IGE) structure confirmed the fundamental operation of the IGEFET microsensor. Principal component analysis (PCA) and multilinear regression were applied to …

Go to article

Experimental Investigation And Computer Modeling Of Optical Switching In Distributed Bragg Reflector And Vertical Cavity Surface Emitting Laser Structures, Richard J. Bagnell Dec 1995

Experimental Investigation And Computer Modeling Of Optical Switching In Distributed Bragg Reflector And Vertical Cavity Surface Emitting Laser Structures, Richard J. Bagnell

Theses and Dissertations

The optical switching capabilities of Distributed Bragg Reflector (DBR) structures, including Vertical Cavity Surface Emitting Lasers (VCSELs) are examined. Reflectivity switching is demonstrated using both thermal and carrier generated effects to alter the DBR/VCSEL layers' refractive indices. Optical bistability is demonstrated at room temperature, under CW photopumped excitation. The optical bistability hysteresis is controllable by spectral location of the pump on the stop band edge. In the VCSEL, reflective bistability is also evidenced; additionally, this bistability is accompanied by a bistability in the VCSEL lasing output intensity, spot size, and wavelength. Modeling of the DBR/VCSEL thermally induced bistability was accomplished …

Go to article

Thermal Stresses In End-Heated Layered Media, Jerry R. Couick Dec 1995

Thermal Stresses In End-Heated Layered Media, Jerry R. Couick

Theses and Dissertations

Thermal stresses in semi-infinite layered beams heated on the end are calculated using an extension to simple bimetallic thermostat theory. Recently, researchers have used the concept of interfacial compliance to determine interlaminar stresses in a simple thermostat of finite length subjected to a uniform temperature increase. In the present work, the thermostat theory is extended to apply to the beams of interest. A closed-form solution to the problem is obtained. It is not applicable within about one beam thickness (St Venant boundary region) of the end. Various classes of layered materials are analyzed to determine if significant stresses exist outside …

Go to article

A Monte Carlo Analysis Of Computerized Tomography, Karyl J. Davis Dec 1995

A Monte Carlo Analysis Of Computerized Tomography, Karyl J. Davis

Theses and Dissertations

The purpose of this thesis was to model a computerized tomography device (CT) using Monte Carlo methods to determine the scattered radiation spectrum inside and the dose outside the suite at Wright-Patterson Medical Center and at a generic suite to non-occupational personnel. This was driven by the recent inclusion of the most recent NCRP recommended dose limits into 10CFR20 of 50 mSv, occupational; 1 mSv; non-occupational continuous exposure; and 5 mSv, infrequent exposure. The rotating fan beam of the CT was modeled for MCNP, a general-purpose Monte Carlo n-particle transport modeL The CT target was a standard human phantom defined …

Go to article

Effects Of Ammonium Perchlorate On The Thyroid Hormone Levels Of The Sprague-Dawley Rat, James H. King Jr. Dec 1995

Effects Of Ammonium Perchlorate On The Thyroid Hormone Levels Of The Sprague-Dawley Rat, James H. King Jr.

Theses and Dissertations

The purpose of this research was to determine the threshold dose for ammonium perchlorate (AP) in the Sprague-Dawley rat. No dose response data exist for AP and the EPA has studied literature on the subject of perchlorates to determine a provisional reference dose. The Perchiorate Group, a consortium of DoD and industry representatives, believes this provisional reference dose is too conservative. This experiment was executed to provide dose response data on which to base a more accurate reference dose. The study consisted of eight groups of 12 Sprague-Dawley rats, six male and six female, which were exposed to incremental doses …

Go to article

A Systems Engineering Approach To Aircraft Kinetic Kill Countermeasures Technology: Development Of An Active Aircraft Defense System For The C/Kc-135 Aircraft, Mark C. Cherry, Bruce R. Dewitt, Christopher G. Dusseault, Joel J. Hagan, Brian S. Peterson Dec 1995

A Systems Engineering Approach To Aircraft Kinetic Kill Countermeasures Technology: Development Of An Active Aircraft Defense System For The C/Kc-135 Aircraft, Mark C. Cherry, Bruce R. Dewitt, Christopher G. Dusseault, Joel J. Hagan, Brian S. Peterson

Theses and Dissertations

Modern Surface to Air Missiles (SAMs) present a significant threat to today's military and civilian aircraft. Current countermeasure systems such as flares and chaff rely on decoying the missile threat and do not provide adequate protection against advanced computerized missiles (Schaffer, 1993:1). An aircraft defense system that actively seeks out and defeats an incoming missile by placing a physical barrier in the missile's path offers a promising alternative to current countermeasures technology. This thesis reports the preliminary design of an active aircraft defense system for the protection of the C/KC-135 aircraft from SAMs. The developed system utilizes a kinetic kill …

Go to article

Thermo-Mechanical Fatigue Behavior Of Cross-Ply Ceramic Matrix Composite Under Tension-Tension Loading, Dana G. Allen Dec 1995

Thermo-Mechanical Fatigue Behavior Of Cross-Ply Ceramic Matrix Composite Under Tension-Tension Loading, Dana G. Allen

Theses and Dissertations

The purpose of this study was to investigate the combined effect of cyclic temperature and loading on the fatigue life of a ceramic matrix composite with a cross ply lay-up. The material used in this study was a potassium borosilicate glass (BSG) doped magnesium aluminosilicate (MAS) cordierite matrix reinforced with Nicalon (silicon carbide, SiC) fibers in a [0/90]4s lay-up. Thermomechanical fatigue (TMF) tests were performed with a period of 180 seconds/cycle, or 0.00556 Hz, and a triangular wave-form. The temperature was cycled between 566°C and l093°C, and the stress levels varied between 60 MPa and 145 MPa. All tests …

Go to article

Application Of Mixed-Norm Optimal Control To A Multi-Objective Active Suspension Problem, John B. Allison Dec 1995

Application Of Mixed-Norm Optimal Control To A Multi-Objective Active Suspension Problem, John B. Allison

Theses and Dissertations

Mixed norm optimal control synthesis is used to solve a multiobjective suspension problem. The objective is to develop a controller for an active suspension system onboard a tractor semitrailer vehicle. The problem is first approached by using H2 and H∞ optimization. It is shown that by combining both techniques into one mixed norm optimization method, it is possible to exploit the strengths of each norm to provide superior performance. Two H2/H∞ designs were completed. One design concentrated on optimal performance at one design condition. The second design concentrated on providing the best performance possible at a medium …

Go to article

An Experimental Investigation Of A Sting-Mounted Finite Circulation Control Wing, Lorenzo C. Bradley Iii Dec 1995

An Experimental Investigation Of A Sting-Mounted Finite Circulation Control Wing, Lorenzo C. Bradley Iii

Theses and Dissertations

This study investigated the lift, drag and pitching moment performance of a circulation control wing in the AFIT 5-ft wind tunnel. The experimental wing model was a 20 percent thick, 8.5 percent camber, partial elliptical cross-section, single blowing slot, rectangular planform wing. The aspect ratios tested were 3.99, 3.77 and 3.75. The variables in the investigation included the slot blowing rate and model configuration. The model was modified by adding a leading edge nose droop, a trailing edge splitter plate and wing tip fences to improve flow at the leading edge, reduce separation effects, and encourage attached flow on the …

Go to article

Numerical Simulation Of Supersonic Turbulent Boundary Layer Flow Under The Influence Of Mild Pressure Gradients, Eric T. Fick Dec 1995

Numerical Simulation Of Supersonic Turbulent Boundary Layer Flow Under The Influence Of Mild Pressure Gradients, Eric T. Fick

Theses and Dissertations

Mach 2.9 boundary layer flow (Re/m ≈ 1.75x107) under the influence of mild pressure gradients is studied numerically. Baldwin-Lomax and k - ω turbulence models are incorporated into a cell centered finite volume flow solver and the results are compared with hot wire anemometry and Laser Doppler Velocimetry (LDV) measurements obtained for the same geometries in the AFIT Mach 2.9 wind tunnel. Agreement between the present simulations obtained with the k - ω turbulence model and experimental velocity profiles is excellent in all test sections. Nondimensional turbulent shear stress predictions closely match experimental data in the …

Go to article

Validation Of The Articulated Total Body Model Data Set Describing The Large Advanced Dynamic Anthropomorphic Manikin, Joel J. Hagan Dec 1995

Validation Of The Articulated Total Body Model Data Set Describing The Large Advanced Dynamic Anthropomorphic Manikin, Joel J. Hagan

Theses and Dissertations

Recent cut-backs in Department of Defense spending have presented a need to augment full-scale ejection seat testing with computer simulation. To this end, the U.S. Air Force's Armstrong Laboratory has developed a data set describing the Advanced Dynamic Anthropomorphic Manikin (ADAM) for use in conjunction with the Articulated Total Body (ATB) model for the purpose of simulating the dynamics of the ADAM during sled track ejections. The purpose of this thesis is to validate the ADAM data set by graphically comparing ADAM joint angular displacements calculated by the ATB model with those measured during ejection seat sled track tests. The …

Go to article

Experimental Investigation Of A Supersonic Turbulent Boundary Layer With Adverse Pressure Gradient, Chad S. Hale Dec 1995

Experimental Investigation Of A Supersonic Turbulent Boundary Layer With Adverse Pressure Gradient, Chad S. Hale

Theses and Dissertations

Laser Doppler Velocimetry (LDV) measurements were made to quantify the effect of adverse pressure gradient on the compressible turbulent flow structure in a Mach 2.9 boundary layer (Re/m= 1.75 x 107). Measurements included profiles of 2-D mean velocities, turbulence intensities, Reynolds shear stresses, intermittency, flatness and skewness. In addition, mean strain rates were also measured. The boundary layer measurements were acquired for both flat plate and compression ramp models. LDV measurements were made at two locations on the compression ramp model at 68 cm and 71 cm downstream of the nozzle throat. At these locations, Β …

Go to article

Mach 2.9 Investigation Into The Flow Structure In The Vicinity Of A Wrap-Around Fin, Richard E. Huffman Jr. Dec 1995

Mach 2.9 Investigation Into The Flow Structure In The Vicinity Of A Wrap-Around Fin, Richard E. Huffman Jr.

Theses and Dissertations

A ceiling-mounted semi-cylindrical model containing a single wrap-around fin (WAF) was tested in the AFIT Mach 2.9 test facility. Flow visualization using oil- low streaklines, schlieren images and shadowgraph photography revealed a A-shock at the fin-body juncture and the development of an asymmetric bow-shock about the fin. Quantitative measurements were taken with a 100 cone-static pressure probe, a Pitot pressure probe and two cross-wire hot-film probes (u-v and u-w components, respectively). Measurements were made at cutting-planes from the inlet of the test section to aft of the model, with emphasis placed in the vicinity of the WAF. Results include cutting-plane …

Go to article

Vehicle Thermal Control With A Variable Area Inlet, Thomas R. Layne Dec 1995

Vehicle Thermal Control With A Variable Area Inlet, Thomas R. Layne

Theses and Dissertations

This study developed a variable area inlet and controller that regulated the temperature of an electrical component with ram air. The intent of the variable area inlet was to reduce vehicle drag by eliminating inefficiencies associated with component cooling and fixed area inlets. These inefficiencies arise from vehicles moving at varying speeds through varying air temperatures. The hardware model consisted of an electrical component mounted inside a right-circular cylindrical duct. The variable area inlet, mounted in the front of the duct, consisted of a butterfly valve that was actuated by a stepper controller acted on the feedback signal of a …

Go to article

Investigation Of Aerodynamic Alterations For Improving The Kc-135 Boom Performance During Aerial Refueling, Debra A. Nawrocki Dec 1995

Investigation Of Aerodynamic Alterations For Improving The Kc-135 Boom Performance During Aerial Refueling, Debra A. Nawrocki

Theses and Dissertations

This study investigated the eligibility of the KC-135 air refueling boom for improved capabilities in the areas of control and performance. By using a thick airfoil cross-section for the boom tube, rather than the current circular cross-section, the ability to increase the lift characteristics was verified Prior compiled test data was used for comparison against analytical computer solutions. The possibility and effects of control frequency oscillations were also examined due to the unstable nature of the flow at test conditions. Additionally, the effect of other cross-section shapes, such as the blunt fairing, on the size of the flyable envelope for …

Go to article

Experimental Investigation Of A Supersonic Boundary Layer Including Favorable Pressure Gradient Effects, Joel J. Luker Dec 1995

Experimental Investigation Of A Supersonic Boundary Layer Including Favorable Pressure Gradient Effects, Joel J. Luker

Theses and Dissertations

This study used advanced laser Doppler velocimetry techniques to measure the turbulence intensities and Reynolds shear stresses in Mach 2.8 turbulent flat plate and Mach 2.9 favorable pressure gradient (FPG) boundary layers. The FPG was generated using a convex curved wall and had a strength of ß = 0.1, where ß is Clauser's equilibrium parameter. The maximum magnitude of the 'extra' strain rates normalized by the main strain rates was 0.1, which meant the FPG was considered to be a strong pressure gradient. The fiat plate results indicated that the LDV procedures used in this experiment prevented angular biasing of …

Go to article

Influence Of A Moving Endwall On The Tip Clearance Vortex In An Axial Compressor Cascade, Lawrence J. Peter Dec 1995

Influence Of A Moving Endwall On The Tip Clearance Vortex In An Axial Compressor Cascade, Lawrence J. Peter

Theses and Dissertations

This experiment involved the design, construction, validation and testing of a new facility for the investigation of vortices generated by compressor rotor blade tip clearance with a moving endwall. A five-tube pressure rake placed downstream of the trailing edge of a cascade of blades measured the pressure field for flow coefficients ranging from 20 to 1.66 and tip clearances of 0.33, 1.0, 1.7 and 2.4 percent chord. Contour plots of mass averaged pressure loss coefficient appear to show the no-flow tip vortex becomes entrained and diffused by the moving wall boundary layer. The high loss region near the moving wall …

Go to article

Frequency Effects On Fatigue Behavior Of A Unidirectional Metal Matrix Composite At Elevated Temperature, Robert N. Pittman Dec 1995

Frequency Effects On Fatigue Behavior Of A Unidirectional Metal Matrix Composite At Elevated Temperature, Robert N. Pittman

Theses and Dissertations

The fatigue response and life of a unidirectional SCS-6/Ti-6-4 metal-matrix composite were examined under tension-tension, load-controlled conditions at elevated temperatures and different frequencies. Composite specimens were fatigued at frequencies of 0.01, 0.1, 1 and 10 Hz, and at three stress levels. Plots of cycles to failure versus maximum stress and test frequency showed that fatigue life was more cycle-dependent at higher frequencies and more time-dependent at lower frequencies. Comparisons of tests at 427°C with their counterparts at 370°C and 538°C showed that these frequency effects were magnified as temperature increased: lower frequency tests at 538°C exhibited greater time-dependence than tests …

Go to article

First Prev Next Last