Digital Commons Network^™

Developing Realistic Behaviors In Adversarial Agents For Air Combat Simulation, George S. Hluck

Theses and Dissertations

This thesis describes an initial effort into creating a rule-based, reactive system for air combat simulation. This program uses the object-oriented extension of the expert system tool known as the C Language Integrated Production System CLIPS. This effort rose out of the need for creating and integrating semi-autonomous forces for the Distributed Interactive System DIS. This thesis describes the basic maneuvers a pilot uses in present air-to-air combat. The methodology includes the design decisions, knowledge-base development, phase architecture, and maneuver architecture development. The actual implementation of the selected architecture is described. This thesis also discusses the results of experimental runs …

Alternative Architectures For Domain-Oriented Application Composition And Generation Systems, Warren E. Gool

Theses and Dissertations

This thesis presents a formalized framework for comparing the structure and semantics of software architectures. The framework uses object diagrams for analyzing the structure of the architectures and the axiomatic approach for analyzing the semantics. This framework is used to compare the Object Connection Update OCU model developed by the Software Engineering Institute against four other software architectures VHDL defined by Lipsett, MetaH defined by Honeywell, microRapide defined by Luckham, and hierarchical software systems as defined by Batory. The goal of the comparison was to evaluate the OCU model for suitability within prototype application composition and generation systems. This research …

Rendering Of Three-Dimensional Data Sets Derived From Finite-Difference And Spectral Methods, Paul A. Schubert

Theses and Dissertations

The timely visualization of three-dimensional data sets and the advantages of using a spectral method solution versus a finite-difference method solution in rendering isosurfaces is described. The Beam-Warming numerical algorithm, which uses implicit-approximate-factorization, is used to generate the steady-state solutions for a model diffusion-convection problem. The Chebyshev collocation operator is used to evaluate the right-hand side of the Beam-Warming algorithm for the spectral solution. Comparing the model problem results with the exact solution, the spectral series solution is truncated to the same degree of accuracy as the finite-difference for comparison of rendering times. The rendering algorithm employs octrees to efficiently …

Use Of Chlorine Dioxide To Remove Fish Pathogens From Garrison Diversion Water, Wayne C. Hustoft

Theses and Dissertations

This report considers the use of chlorine dioxide as an alternate disinfectant for the removal of biota from Garrison Diversion water. Laboratory testing has shown that chlorine may not be an acceptable disinfectant because it can produce carcinogens from side reactions with constituents found in natural surface waters.

This study used Lake Sakakawea water collected at the Snake Creek Pumping Station located on the eastern shore. Water samples were of direct filtration effluent from a laboratory scale filter column. samples were gathered at several different turbidity levels. The "DPD" method, as published in "Standard Methods for the Analysis of Water …

Crew Scheduling Of Space Operations Squadrons (Sops), Marianne Idzi

Theses and Dissertations

The mission of Space Operations Squadrons is continuous support of military satellite systems. The scheduling problem associated with conducting continuous operations is threefold. The first problem is finding cyclical crew shift schedules that meet daily manning requirements, adhere to current regulations, contain a minimum number of workshift changes during consecutive duty days, and maximize the non-duty time allowed between duty shifts. The second problem is to establish a sea of criteria to evaluate alternative shift schedules. Finally, the third problem is to minimize the number of personnel required to meet the scheduling requirements stated in the first problem. This study …

The Application Of Simulated Annealing To Stochastic Systems, Charles B. Warrender

Theses and Dissertations

Simulated Annealing was used to optimize three constrained simulation models. For each of these models, seven different acceptance functions were evaluated and compared against the performance of Local Search. These comparisons demonstrated the affect that different acceptance functions have on the performance of the algorithm. The performance was measured by the average solution quality and average efficiency obtained from several runs. The first model facilitated the implementation of Simulated Annealing using the SLAM simulation language. The configuration space was small, described by only two decision variables. It demonstrated the viability of using Simulated Annealing to optimize the variable settings in …

A Nonlinear Three-Dimensional Micromechanics Model For Fiber-Reinforced Laminated Composites, David D. Robertson

Theses and Dissertations

In this study, a three-dimensional micromechanics model is developed. The present capabilities of the model include both unidirectional and laminated composite layups with various types of nonlinear analysis such as a thermoelastic-plastic analysis employing the Prandtl-Reuss flow relations, a thermoviscoplastic analysis using Bodner-Partom unified constitutive theory, and an interfacial damage progression scheme based on a statistical interfacial failure criteria. Such nonlinearities are critical factors during thermomechanical fatigue TMF loading of high temperature composites. Solutions were obtained and extensive comparisons performed with existing micromechanics models, finite element analysis, and experiment with excellent results. In addition, the analysis was developed to require …

Characterization Of Fatigue Damage In A Metal Matrix Composite (Scs-6/ Ti-15-3) At Elevated Temperature, Brian P. Sanders

Theses and Dissertations

The fatigue characteristics of a unidirectional titanium based metal matrix composite (MMC) were investigated at elevated temperature (427°C). A hybrid strain controlled loading mode was used to subject the 0° and 90° laminas to fatigue. Along with the fatigue tests, microscopy and analytical modeling ware also conducted. This combination of activities led to defining the initiation and progression of damage and deformation in the MMC. Hen loading was parallel to the fiber on, the fatigue behavior was initially dominated by creep deformation of the matrix. Then, depending on the maximum strain, specimen failure was the result either fiber fractures or …

Object-Oriented Design And Implementation Of A Parallel Ada Simulation System, James T. Belford

Theses and Dissertations

Simulations which model the behavior real world entities are often large and complex, and require frequent changes to the configuration. This research effort examines the benefits of using object-oriented techniques to develop a distributed simulation environment which supports modularity, modifiability, and portability. The components of the Parallel Discrete Event Simulation PDES environment are identified and modeled using the Rumbaugh modeling technique. From the model, a prototype implementation of a Parallel Ada Simulation Environment PASE is accomplished using Classic Ada. A system interface for the Intel ipsc2 Hypercube was developed to illustrate the concepts of modularity and portability. In addition, the …

Interpersonal Perception In Mmpi-2 Defined Sociopathic Females: An Examination Of The Effects Of Partner Gender On Impression Accuracy And Self-Perception., Frederick Paul List

Theses and Dissertations

The present study examined various aspects of interpersonal perception among individuals exhibiting significant sociopathic characteristics (spike 4 MMPI-2 elevations) and control subjects (no significant MMPI-2 elevations). In addition, sociopathic self-perceptions were examined to test hypotheses related to self-image differences between these individuals and control subjects.Each subject participated in two interaction sessions. In each session the subject interacted with two partners. For one session both partners were male, and for the other, both were female. This study appears to offer one of the first attempts to implement Cronbach's component analysis in a study of gender effects among individuals exhibiting a clinically …

On The Automation Of Object-Oriented Requirements Analysis, Nancy L. Crowley

Theses and Dissertations

The research investigated the possibility that an object-oriented requirements analysis (OORA) specification model can be represented in a computer system and used as a basis for the elicitation of the information necessary for the development of an object-oriented specification for a particular problem. The proof-of-concept system developed is called the OORA automated Knowledge System (OAKS). OAKS contains a generic domain model that is modified to satisfy a particular problem in the domain. The core of OAKS is a reusable domain model, which represents a domain of interest. The domain model is used as a basis for user changes that are …

Photoluminescence Spectroscopy Of Zinc Germanium Diphosphide (Zngep2), Jack E. Mccrae

Theses and Dissertations

Zinc germanium diphosphide (ZnGeP₂) is a chalcopyrite semiconductor with strong nonlinear optical properties and potential application to Air Force interests. The characteristics of this material have been studied using photoluminescence (PL) spectroscopy. The PL spectrum is dominated by transitions from the conduction band to a deep acceptor level, and features in the spectrum suggest that more than one transition is being observed. The PL is partially polarized, and the degree of polarization appears to differ for each feature in the spectrum. The relative PL intensity of these features are seen to depend upon the wavelength of the excitation …

Investigation Of The Sensitivity, Selectivity, And Reversibility Of The Chemically-Sensitive Field-Effect Transistor (Chemfet) To Detect Nitrogen Dioxide, Dimethyl Methylphosphonate, And Boron Trifluoride, Neal T. Hauschild

Theses and Dissertations

This study investigated the sensitivity, selectivity, and reversibility of a chemically-sensitive field-effect transistor (CHEMFET) gas microsensor. Various physical operating parameters were tested to determine which produced the most significant sensitivity, selectivity, and reversibility which were computed from response changes generated from electrical conductivity modulations when exposed to challenge gases. The variable operating parameters included: thinfilm material, film thickness, challenge gas specie, challenge gas concentration, and operating temperature. Copper phthalocyanine and lead phthalocyanine were used as thin films to detect the following challenge gases: nitrogen dioxide, dimethyl methylphosphonate, boron trifluoride, methanol, carbon monoxide, vinyl chloride, and trichloroethylene. Tests revealed that copper …

Analytical Modeling Of Aquifer Decontamination By Pulsed Pumping When Contaminant Transport Is Affected By Rate-Limited Sorption And Desorption, Thomas A. Adams, Robert C. Viramontes

Theses and Dissertations

This research explores radially convergent contaminated transport in an aquifer towards an extraction well. This thesis presents the equations governing the transport of a contaminant during aquifer remediation by pulsed pumping. Contaminant transport is assumed to be affected by radial advection, dispersion, and sorption/desorption. Sorption is assumed to be either equilibrium or rate-limited, with the rate-limitation described by either a first-order law, or by Fickian diffusion of contaminant through layered, cylindrical, or spherical immobile water regions. The equations are derived using an arbitrary initial distribution of contaminant in both the mobile and immobile regions, and they are analytically solved in …

Evaluation Of The Total Petroleum Hydrocarbon Standard For Cleanup Of Petroleum Contaminated Sites, Rick A. Blaisdell, Mark E. Smallwood

Theses and Dissertations

This study evaluated the TPH (total petroleum hydrocarbon) cleanup standard for petroleum contaminated soils (PCS). A survey of 13 state regulators was performed to characterize current standards and regulatory viewpoints on the use of a TPH versus a BTEX cleanup standard. The regulatory community considers the BTEX constituents the greatest threat to groundwater, yet expressed concern that the use of a compound specific standard, without an accompanying analysis for TPH, might result in residual soil contamination that may present risk. This study also evaluated the ratio of BTEX TPH in soil over time. Based on JP-4 contaminated site soil data, …

A Refinement Of Risk Analysis Procedures For Trichloroethylene Through The Use Of Monte Carlo Method In Conjunction With Physiologically Based Pharmacokinetic Modeling, William J. Cronin Iv, Eric J. Oswald

Theses and Dissertations

This study refines risk analysis procedures for trichloroethylene (TCE) using a physiologically based pharmacokinetic (PBPK) model in conjunction with the Monte Carlo method. The Monte Carlo method is used to generate random sets of model parameters, based on the mean, variance, and distribution types. The procedure generates a range of exposure values for human excess lifetime cancer risk of lxl0 (exp-6), based on the upper and lower bounds and the mean of a 95% confidence interval. Risk ranges were produced for both ingestion and inhalation exposures. Results are presented in a graphical format to reduce reliance on qualitative discussions of …

Physiologically Based Pharmacokinetic Modelling Of Percutaneously Absorbed Dibromomethane Utilizing Multiple Dermal Sub-Compartments, Christopher R. Mcdaniel

Theses and Dissertations

The goal of this study was to develop a physiologically based pharmacokinetic (PBPK) model that predicts mammalian blood concentrations of dibromomethane following exposure by dermal absorption more accurately than a previously developed Homogeneous Dermal Model. The Homogeneous Dermal Model contains a dermal compartment with no dermal sub-compartments. The 1:1 Dermal Model developed in this research contains a dermal compartment with a stratum corneum and a composite dermal sub-compartment of equal volume. This model yields predictions which are 21.4 percent more accurate than the original homogeneous model. In order to represent skin anatomy more accurately, the 1:10 Dermal Model variation was …

An Analysis Of Site Parameters Affecting Natural Attenuation In Saturated Soil, William H. Potts

Theses and Dissertations

This study investigated the natural attenuation mechanisms and some of the parameters affecting those mechanisms in the saturated zone. A literature search revealed numerous studies of various attenuation and the associated parameters. Much of the literature emphasized biodegradation as the most promising attenuation mechanism. BIOPLUME II(TM), a fate and transport model, was used to simulate the fate and transport of contaminant plume. The effects of the model parameters were investigated by observing the distance a contaminant plume was expected to migrate over a fifty year period. The investigation was limited by the model which excludes chemical reactions and some physical …

Vadose Zone Contamination Measurement And Modeling, Thomas A. Reeder

Theses and Dissertations

This thesis investigated the effects of the slow sorption mechanism on the transport of volatile organic contaminants in the vadose zone. Recent research has shown that slow sorption may have a significant impact on the transport of volatile organic compounds in the subsurface. Specifically, this document examined the effects of slow sorption on the Vapor Extraction System (VES) and the Purge and Trap Measurement System. It was found that the slow sorption of organic molecules on soil may profoundly influence the efficiency of VES and purge and trap. In addition, this thesis investigated possible alternatives to purge and trap, including …

Development Of A Cost-Effectiveness Methodology To Prioritize Environmental Mitigation Projects, Robert E. Thompson

Theses and Dissertations

A cost-effectiveness prioritization methodology was developed using concepts from the cost-effectiveness technique. The new methodology called the Cost-Effectiveness methodology (CEM) allows the prioritization of mitigation projects across broad categories of hazardous sites as would be ranked among the offices of the Environmental Protection Agency. Two performance criteria were incorporated into the process--rank projects that save the most lives per dollar and enhance general applicability across different categories of risk. A metric was developed that represents the ratio of lives saved per dollar spent on mitigation alternatives of contaminated environmental sites. This metric was incorporated into the CEM to distinguish mitigation …

A Plan For Coordinating Department Of Defense Emissions Trading, Charles H. Weir

Theses and Dissertations

The original purpose of this research was to develop a plan to coordinate emissions trading between DoD installations. During the course of this research, findings indicated that restrictions on emissions trading would make such a plan of limited applicability. However, findings did indicate the need for a tool to assist managers with selecting the netting, offset, and banking emissions trading alternatives. Developing this tool became the objective of this research. This objective was fulfilled by developing a management guide to assist environmental managers with selecting the emissions trading alternatives netting, banking, and offsets. Background information was collected by examining literature …

A Parametric Regression Of The Cost Of Base Realignment Action (Cobra) Model, Douglas D. Hardman, Michael S. Nelson

Theses and Dissertations

This study develops a parametric model that is capable of generating accurate estimates of the costs to close Air Force installations. The new model is based upon, but much simpler to use than, the Cost of Base Realignment Action (COBRA) model. COBRA is an economic cost analysis model that requires a minimum of 250 inputs and as many as 700 inputs. The new parametric model requires just 10 input variables and was developed using least squares multiple regression. Comparison of the new parametric model to COBRA indicates that it captures 91 percent of the variance in cost estimates generated by …

Guidance For The Development Of Air Force Storm Water Sampling Programs, Jerry K. Weldon Iii, Roy T. Willis

Theses and Dissertations

The purpose of this research was to develop sampling guidance that will enable Air Force (AF) installations to conduct cost effective storm water sampling in accordance with current storm water regulations. Data on the techniques used by AF bases to obtain storm water samples for the AF group storm water permit application were collected and analyzed. This information was used to outline management and resource requirements associated with the implementation of NPDES storm water regulations. The use of in-house personnel, automatic sampling equipment, or a contractor to perform the field data collection was examined. An in-house manual approach to storm …

A Cost Model For Usaf Acquisition Of Commercial Aircraft For Service In The Special Air Mission Fleet, C. Grant Mcvicker Iii, Michael T. Roche

Theses and Dissertations

The purpose of this research was to develop a cost estimating model which would allow cost estimators the ability to quickly and accurately estimate the acquisition of Air Force Special Air Mission fleet aircraft. The literature review revealed studies, government contracts, and trade publications which served as source data. This information was supplemented by interviews with acquisition specialists and contractors and incorporated into a database. Several estimating techniques were created and used to estimate the various cost elements. The Commercial Aircraft Integrated Cost Estimating Tool (CAICET) model was then developed to incorporate the estimating techniques with the database. This was …

Research And Development Project Selection Tools: Probing Wright Laboratory's Project Selection Methods And Decision Criteria Using The Lateral Airfoil Concept, James E. Barger

Theses and Dissertations

This research accomplished three major tasks. First it examined familiarity and usage rates for fifteen published R&D project selection methods in the context of a larger general issue, the Air Force's ability to develop and exploit technology. Wright Laboratory served as the focus for the research effort and displayed a greater tendency to use formal methods in 1993 than was shown in prior research. The laboratory's overall preference for simpler models like Checklist, Scoring, and Sorting led to a recommendation that authors familiar with the other techniques communicate them in engineering and management vernacular. Secondly, the study introduced a technological …

The Effects Of Cognitive Style On The Learning Preferences Of Graduate School Students, Carey F. Tucker, John W. Underwood

Theses and Dissertations

This research establishes significant relationships between an individual's cognitive style, measured by the Myers-Briggs Type Indicator (MBTI) , and the learning preferences of that individual, measured by the Learning Style Survey. The sample consisted of 529 Air Force Institute of Technology graduate students in the School of Systems and Logistics from 1988 to 1992, who completed four tests, pre- and post-tests of both the MBTI and the LSS. This research utilized Chi-Squared Goodness of Fit procedures, determining that some learning methods, techniques, and devices (MTDs) are most or least preferred by all four cognitive types, Sensing-Thinking, Sensing-Feeling, Intuitive-Thinking, and Intuitive-Feeling. …

Schedule Estimating Relationships For The Engineering And Manufacturing Development Of Bomber, Transport, Tanker And Surveillance Aircraft Systems, D. Scott Boyd, Brian D. Mundt

Theses and Dissertations

This study developed parametric schedule estimating relationships (SERs) for the engineering and manufacturing development (EMD) phase for nontactical aircraft systems. The potential value of this nontraditional approach to estimating schedule duration has been established by previous applications to tactical aircraft, air-launched munitions, and office buildings. Prior research suggested acquisition strategy parameters to be significant schedule drivers. For this study, data on EMD milestone dates and potential schedule drivers were collected on 56 bomber, transport, tanker, and surveillance aircraft systems. Several SERs were developed for these systems using linear regression analysis. The EMD phase was divided into subphases based on significant …

Software Cost Estimating Models: A Comparative Study Of What The Models Estimate, George A. Coggins, Roy C. Russell

Theses and Dissertations

This effort developed a consolidated document which highlights and examines differences in definitions, assumptions, and methodologies used by the REVIC, SASET, PRICES, and SEER-SEM cost models. The following research questions were investigated: (1) What differences exist between the cost models? (2) How do these differences impact the resulting estimates? (3) To what degree can we explain and adjust for known differences between the cost models? Seven specific areas were addressed: (1) software development phases, (2) development activities and cost elements, (3) source lines of code and language differences, (4) key model attributes and key cost drivers, (5) implications of Project …

Quantification Of Uncertainty In The Remedial Investigation/Feasibility Studies Process, Kurt C. Held, Perry J. Shepler

Theses and Dissertations

This thesis developed a method to bound cost estimates with a prediction interval of costs for the Remedial Investigation/Feasibility Study (RI/FS) phase of the Installation Remediation Program (IRP) process. The prediction interval provides a reasonableness cross check for RI/FS project cost estimates. To develop the cost bounds, three major activities occurred. First, a database was developed from RI/FS projects managed by the Army Corps of Engineers. Second, a regression cost model was developed from the observations in the database. Third, a prediction interval specified at the 70 percent confidence level was derived from the cost model. This prediction interval provides …

Development Of Standardized S Curves For The Evaluation Of Major Department Of Defense Purchases, Richard E. Knepp, Michael E. Stroble

Theses and Dissertations

The increasing cost of Department of Defense acquisitions combined with the shrinking Defense budget puts a premium on continuing the funding of only those programs that are practical and affordable. This emphasizes a need for good methods of monitoring the progress of programs. Current methods of controlling and evaluating cost performance are limited. It is our belief that the generation of S-curves using current Cost and Schedule Control Systems Criteria (C/SCSC) data will provide a mathematical and/or graphical approach to assist in the control of program costs. This thesis attempted to plot the percentage of time for a contract's completion …