Digital Commons Network^™

Low Temperature Performance Of Field Effect Transistors, Wei Zhu

Theses

The low temperature static characteristics of silicon junction field-effecttransistors (JFETs) have been investigated and analysed. The followingchanges were observed after cooling down the transistors: pinch-offvoltage and transconductance increases; and drain current is changedas a function of the drain-source voltage. It was found that there wasan increase in the amplifying properties and a reduction in noise voltageof cooled transistors. In addition, the temperature and voltage dependenceof leakage current have been studied. Temperatures below 77K are ofinterest in evaluating effects of impurity freezeout and temperatureabove 77K are important since actual device temperature will be aboutthe ambient. Operation of FET circuits at liquid …

An Integrated Approach To Implement Iso 9000 Series Standards To United States Manufacturing Industry, Jatin N. Amin

Theses

Implementation of ISO 9000 series quality system standards to the U.S. manufacturing industry is discussed by developing a generic model for implementation. In recent past, quality became a prime performance issue to formulate strategy to improve market share and profit for U.S. manufacturing industry. Many companies seeks for ISO 9000 registration. Manufacturing industry and other industries as well, are facing numerous problems in implementing ISO 9000 quality system standards. At present, about 400 U.S. companies have gained certification under this standard.

In this work an attempt has been made, to highlight problems which are most likely to be critical to …

The Application Of Stereolithography To The Creation Of Molecular Models Of Amiloride And Its Analogues, Thomas John Busanic

Theses

Stereolithography, a process by which a computer-guided Ultraviolet (UV) laser is applied onto a liquid monomer resin to form a solid polymer, was used to create solid models of amiloride and two of its analogues. The Cartesian coordinates used as input for the orientation of each atom in a molecule were calculated using ab initio molecular orbital theory. Since the structures of the molecules are calculated in this fashion, they represent a more accurate representation of the molecules than that provided by standard molecular modeling kits.

The original purpose of this work was to assist a blind chemist in appreciating …

Deterministic And Adaptive Routing Algorithms For Mesh-Connected Computers, Yikui Cai

Theses

The two-dimensional mesh topology has been widely used in many multicomputer systems, such as the AMETEK Series 2010, Illiac IV, MPP, DAP, MasPar MP-1 and Intel Paragon. Its major advantages are its excellent scalability and simplicity. New generation multicomputer uses a switching technique called wormhole routing. The essential idea of wormhole routing is to advance a packet directly from incoming to outgoing channel without sorting it, as soon as enough information has been received in the packet header to select the outgoing channel. It has advantages of low latency and low error rate. The problems addressed by this thesis are …

Performance Analysis Of The "Fiber Distributed Data Interface (Fddi) Network" Using Petri Nets And Spnp Software Package, Savvas Eteoclis Christodoulou

Theses

The main purpose of this thesis is to model a "Fiber Distributed Data Interface" (FDDI) Network using Petri Nets, and to analyze its performance with the help of the SPNP software package. The verification of a communication protocol, by modeling it as a discrete-event system using Petri Nets is a new approach.

The correlation between the throughput rate, voice and data throughput, and the parameters of the system, such as the network load and the network speed are investigated. An overview of the "Fiber Distributed Data Interface" is provided, along with its network protocol and the limitations of its operating …

Processing, Structural And Electrical Properties Of Sic, Mark Farhad-Garousi

Theses

Cubic silicon carbide films grown by chemical vapor deposition (CVD) on silicon substrates typically have n-type conductivity at 300 °K dominated by a heavily compensated donor with a binding energy in the < 20 meV range. Binding energies <20 meV are not expected in SiC for isolated donors because the shallowest expected binding energy for an electron bound to an isolated donor is approximately 47 meV. The work done on this topic by a few group of scientists has been studied.

Characterization Of Lightning Induced Voltages On Overhead Power Lines, Wen-Ta Hsiao

Theses

The transient voltage surge caused by lightning is the major source contributed to the disturbance on power systems. The calculation of induced voltages, which is the propagated voltage surge on overhead power lines due to indirect lightning strokes, has been the subject of theoretical and experimental studies. The objective of this research is to develop a comprehensive numerical method to study the induced voltages on an overhead power line caused by a lightning return stroke with arbitrary shapes, for examples inclined lightning, zigzag lightning, etc.

A finite-length lightning channel of any direction in 3-D space has been modelled and closed-form …

Multi-Disk Subsystem Organizations For Very Large Databases, Zhiyi Huang

Theses

This thesis investigates efficient mappings of very large databases with non-uniform access to its data. to a. multi-disk subsystem.

Two algorithms are developed to distribute the database across multiple disks, possibly with replication, in order to minimize latency and maximize throughput. These algorithms are compared with respect to the amount of replication overhead incurred to achieve desired throughput.

A simulator is developed to simulate these two mapping algorithms and investigate the efficiency of these two mappings.

Remediation Of Contaminated Sites Using Hot Gas Injection, Sanjay Jayabal

Theses

Remediation of contaminated subsurface sites at lower cost and time than currently used technologies are being demonstrated for a systems concept using new technology developed at the Hazardous Substance Management Research Center at New Jersey Institute of Technology. A technique for pneumatic fracture is employed to "open" subsurface passages to enhance vacuum extraction of contaminants. Economical and environmentally sound destruction of these contaminants is then accomplished using catalytic oxidation followed by scrubbing to remove air pollutants. The hot gas from this phase of the process is then injected into the subsurface formation after being used to preheat the fuel/air mixture …

Applications Of Binary Sequence Of Order K, Xulun Jiang

Theses

The cumulative distribution of the finite sum of the binary sequence of order k is studied and some of its applications discussed. Certain properties of this sequence are studied and uniformly superior bounds for the cumulative distribution under minimal information on the "success" probabilities are derived.

As an application, an optimal randomized response model to collect sensitive information with dependence in the sample is proposed. This dependence is caused by untruthful response to stigmatizing questions and has been ignored in the past procedures.

The proposed method is useful in collecting reliable information in situations where the response is difficult to …

Measurement Of Oxygenated Volatile Organic Compounds Using The Thermionic Ionization Detector, Wanfang Li

Theses

A thermionic ionization detector (TID) consists of a catalytically active, low work function heated source. It responds to molecules with high electron affinity which can extract electrons from the surface of the source to form negative ions. TID has been used as selective detectors for nitrogen and phosphorous compounds (NPD). In this research, a TID has been used for selective detection of oxygenated volatile organic compounds (VOCs). The response of the TID to different oxygenated and chlorinated VOCs compounds was studied. To evaluated its performance, the analysis was done using a FID in parallel with the TID. For most of …

Fast Adaptive Algorithms For Signal Separation, Robert A. Manzo

Theses

LMS and RLS type algorithms are suggested for decorrelation of multi-channel systems outputs. These algorithms act as signal separators when applied to unknown linear combinations of the inputs. The performance of the suggested algorithms is compared with that of the conventional LMS and RLS algorithms that minimize the mean square error. It. is shown that the correlation matrix eigenvalue spread associated with the LMS decorrelator is always smaller than the eigenvalue spread corresponding to the conventional LMS. resulting in faster convergence speed for the decorrelator. A new RLS type decorrelator algorithm is suggested. The RLS decorrelator is shown to be …

Managing Occupational Hazards Confronting Healthcare Workers, Kiran A. Mody

Theses

The primary goal of this thesis is to identify, evaluate, and control occupational hazards that may exist in health care facilities.

Due to the complex nature of health care facilities, healthcare workers are always challenged by an imposing group of occupational hazards. The magnitude and diversity of these hazards, and the constantly changing nature of government regulations make it difficult to guarantee absolute protection and accuracy of the material contained herein. However, awareness of the risks, compliance with basic preventive measures, and adequate interventions are all essential components to consider in protecting healthcare workers.

Therefore, potential health effects of various …

Implementation Of Continuous Flow Manufacturing In United States Industries, Rohit P. Patel

Theses

Continuous Flow Manufacturing (CFM) is one of the key strategies to enable the United States industries to adapt to any volume increase and rapidly changing requirements of the market place. CFM is an on-going analysis and improvement activity used to optimize the efficiency, effectiveness and flexibility of any process. The two basic goals of CFM are to reduce cycle time to less than customer order leadtime and to eliminate inefficiencies from the overall manufacturing processes.

The thesis will describe reasons for the scarcity of CFM in United States industries. The methodology applied was a detailed six page questionnaire sent to …

Motion Compensation Using Correlation-Feedback, Zebiba Shifa

Theses

Motion compensation is widely used for exploiting temporal redundancies in the coding of image sequences. Accurate estimation of motion information in image sequences is important in motion-compensated coding. Different approaches have been used to estimate motion to obtain the motion-compensated frame difference signal.

This work uses the correlation-feedback approach to estimate the velocity or the optic flow of the moving image pixel. After the motion of the pixel is estimated. the motion-compensated frame difference signal is found by subtracting the current. frame from the predicted frame.

This correlation-feedback approach estimates the true motion vector of moving image accurately. Consequently, the …

Narrow-Band Interference Rejection In Spread Spectrum Using An Eigen Analysis Based Approach, Aparna Vadhri

Theses

A new adaptive technique is suggested for rejecting narrow-band interferences in spread spectrum communications. When data is coded using a pseudo-noise code, the received signal consists of a wide-band signal with almost white spectral properties, thermal noise, and correlated narrow-band interferences. A new approach is proposed which exploits the statistical properties of the received signal via eigenanalysis of the received data. While the energy of the wide-band signal is distributed over all the eigenvalues of the signal autocorrelation matrix, the energy of the interference is concentrated in a few large eigenvalues. Hence, the eigenvectors corresponding to the large eigenvalues are …

Parallel Exact Enumeration Of Self-Avoiding Walk On Cubic Lattices And Its Applications To Protein Folding Studies, Anek Vorapanya

Theses

Exact enumeration of self-avoiding walk on many lattices have been studied extensively recently. Even a short chain polymer (about 30 monomers) represented as a chain of cubic lattice sites requires a considerable amount of computer time to exhaustively search for all unique conformations. However, self-avoiding walk process can be modified such that it exhibits a high degree of independence among subprocesses. Parallel implementation of such subprocesses can reduce a great amount of enumeration time. Parallel enumeration makes longer chain enumeration possible.

Enumerating only unique conformations requires that all rotation and mirror conformations be removed. An algorithm to avoid generating such …

Interference Cancellation By Time Adjustable Sampling, Josko Zec

Theses

The problem of improving the frequency response of linear arrays is addressed in this thesis. The improvement is measured in the level of rejection of the undesired sources. A new, simple, and practical method is suggested. It is based on adjusting the sampling time in selected channels. Interference cancellation for finite bandwidth signals is accomplished only at, or close to, the carrier frequency. Wideband cancellation requires additional hardware and computational complexity. Conventional way of the wideband interference cancellation utilizes tapped delay line adaptive filters in each channel.

The Time Adjustable Sampling (TAS) method achieves a part of the tapped delay …

Nmr Computer Simulation Of Glassy And Powdered Samples : Application To Studies Of Sodium Borovanadate Glasses, Xian-Quan Zhang

Theses

A computer program is devised to simulate the nuclear magnetic resonance (NMR) spectra observed in powdered and glassy samples in the presence of both nuclear quadrupole and anisotropic chemical shift interactions. This method is performed for the central transition of NMR spectra of nuclei with half-integral spin I. Typical theoretical behavior of the powder pattern is discussed and the "noise" and "error" in the simulated spectra are analyzed. The computer simulation method is applied to the studies of 11B NMR spectra of the sodium borovanadate glass system for which a structural model is presented in the range for which glasses …

Derivation Of Respiration From Electrocardiogram During Heart Rate Variability Studies, Lingeng Zhao

Theses

A method was developed to derive the respiration signal from the ECG signal based on the observation that the body-surface ECG is influenced by electrode motion relative to the heart and that fluctuations in the mean cardiac electrical axis accompany respiration. S-Plus programs were developed to calculate the changes in the value of the mean cardiac electrical axis during respiration from a two lead ECG signal and to generate a continuous ECG-derived respiratory signal from the angle information.

Data were taken from 9 healthy subjects during rest, paced breathing and exercise. The respiration was derived from the recorded ECG signals. …

Programmable Microstrip Dipole Antenna Design, Jing Zhu

Theses

The narrow bandwidth of microstrip dipole antennas is a major limitation for many applications. A method to increase the microstrip dipole antenna bandwidth is illustrated in this thesis. The proposed method utilizes micromechanical actuators to adjust the electrical length of the dipole antenna. The length change is realized by the activities of several microactuators arranged on both arms of the antenna. The radiation pattern and input impedance, as well as the microactuator mechanisms are detailed in this thesis. A programmable microstrip dipole antenna including the microactuators has been designed with the feedline taken into consideration. The fabrication techniques for this …

Extracting Parallelism At Compile-Time Through Dependence Analysis & Cloning Techniques In An Object-Based Paradigm, Binoy Ravindran

Theses

The construct of Abstract Data Type (ADT) modules and Abstract Data Object (ADO) modules supported by most object-based languages are a great source for developing reusable code. To improve the run time performance of such object-based programs, we consider the asynchronous remote procedure call (ARPC) model of parallel execution, in which concurrency is achieved by having the caller and the callee (which are module instances) running on different processors. Frequently, an ADT module is needed simultaneously by other modules, thus causing contention. To resolve this, we clone the module instance in demand and distribute the copies across different processors, so …

3-D Reconstruction And Morphological Analysis Of Normal Rectum, Saritha Sundaresan

Theses

There is no documentation of the 3-D dimensions of normal rectum. We present a method for the architectural and volumetric analysis of the rectum which makes use of a computerized 3-D reconstruction and CT scans of cross-sections of the rectum. The technique is simple, fast, yet potentially reliable. An attempt has been made to calculate the volume, area and average diameter of non-distended rectums (normal). Once we can standardize the technique, then we can study dimensions of the rectum in adult males and females. This thesis constitutes a unified presentation of the essential aspects of the method used in this …

A Tutorial In Frequency Modulation Screening Technology For Lithography, Michael Mell

Theses

An impressive diversity of opinions concerning many important aspects of the Frequency Modulation process are heard from users and vendors. It has not been difficult to catch a single vendor contradicting themselves within their own publications. Many of the claims vendors make are not supported by users' experiences. Other users, on the other hand, have found many of the vendors' brightest claims to be realistic. The information sought for this project was aimed to answer the question "What can I expect if I implement Frequency Modulation screening technology in my shop today?" In order to answer that question effectively, a …

Sfumato And Conjunction, Scott Joseph Dohring

Theses

For the studio section of my MFA in painting thesis, I have produced a series of paintings on canvas concerned with non-objective impasto/textured color fields, some include representation in line, abstract overlays/underlays, while some involve division of the canvas into abutting characteristic approaches. The mediums used include water based & oil based paints, textural compounds (gel medium, joint compound, mastic, talc), pencil, and occasionally found objects. In this paper, I shall analyze and discuss impressions, concepts, and meditations relevant to my thesis work in particular and to the issue of reconciliation between formalist and post-modern approaches to theory/criticism in general …

Adtech Interactive Media Network, Steven Buccellato

Theses

None provided.

Gods, Heroes, And Figureheads, Nancy Stern

Theses

None provided.

Application Of Nonradioactive Southern Blot Foe Detection Of Restriction Fragment Length Polymorphism Changes On Chromosome 5 Q21, Xuejiao Hu

Theses

None provided.

The Hiding House, Michele Lynn Vavonese

Theses

None provided.

The Effects Of Atmospheric Pollutants On Library Microforms, Edward Zinn

Theses

None provided.