Digital Commons Network^™

Design Improvement Using Reverse Analysis In Design For Quality Manufacturability, Vikram V. Datla

Theses

The competitive needs of modern manufacturing demands that innovative approaches be used to gain an edge over the competitors. least Product design is one of the key dimensions wazzu in which companies can excel. Shortening the product design cycle so as to rapidly launch defect free products, is the goal of most companies. Design for Quality Manufacturability (DFQM) is a technique used to evaluate the quality manufacturability of a product at the design stage, so as to eliminate quality problems during production.

DFQM provides a means for relating the activities of quality improvement, product design and manufacturability analysis. The basis …

An Investigation Into The Feasibility Of Utilizing Pneumatic Ultrasonic Devices Coupled With Pneumatic Fracturing In Enhancing Removal Of Volatile Organic Compounds From Soils, Hugo J. Fernandez

Theses

A bench scale investigation was conducted in a Plexiglass ™ Test cell 1 foot square by 2 feet in height, packed with 400 mesh sand to a density of 100 lb. /ft³. The sand was contaminated with a mixture of 10% ethanol and 90% water by weight having a total weight of 11.1 pounds, before it was packed in the test cell. A geotextile 1/2 inch thick was used as a simulated fracture and was placed 3 inches from the bottom of the tank. A siren and a whistle were tested in this fracture.

The data were divided …

Equivalent Circuit Analysis Of A Seventh Order Bandpass Loudspeaker System, Michael Gunnar Johnson

Theses

A seventh order bandpass loudspeaker system was designed using an equivalent circuit analysis. The electrical, mechanical and acoustic systems were each modeled as separate subcircuits derived by using a Voltage-Force-Pressure or impedance analogy; the interactions between the subcircuits were modeled using coupled controlled-sources. The equivalent circuit was analyzed using SPICE (Simulation Program with Integrated Circuit Emphasis). A technique for modeling port and cavity resonances inside the enclosure using distributed element approximations for the resonant components was developed and verified by measurement.

A complete microcomputer based experimental loudspeaker testing system was designed incorporating a sweep frequency oscillator, a gain-controlled audio power …

Enhancing The Bioavailability Of Sorbed Pollutants From Sediments Using Ultrasound, Rachel Mathew

Theses

Many organic compounds, that enter aquatic systems have a strong tendency to sorb onto particulate matter which may be present in suspension or as sediment. Numerous studies have shown that the sediment in aquatic systems concentrate contaminants several orders of magnitude greater than the concentration in the aqueous phase. Particulate associated contaminants in sediments are not easily bioavailable. Hence the efficacy of any treatment technology would be strongly undermined if the contaminants are not made available for microbial utilization. Sediment associated contaminants can be made biologically available to various microorganisms under certain conditions.

In this study, desorption studies were conducted …

Analysis Of Surface Texture Parameters And Cutting Forces In Milling Operations, Preetesh U. Munshi

Theses

It has been known and understood that milling is quite a complicated process being a multi-point cutting tool operation. Each Surface texture is complex and requires different functions of forces to get the optimized Surface Texture. The challenge faced here is to devise any form of relation between the Surface Texture and the Milling Operating parameters (Spindle Speed, Feed rate, Depth of Cut), Cutting forces and the Milling Operating parameters and also between the Surface Texture and the Cutting Forces.

This Research study was conducted to determine the effect of the Operating Parameters on Surface Texture and Cutting forces and …

Petri Net Modeling And Performance Analysis Of Z39.50 Search And Retrieval Protocol, Roopali Paranjpe

Theses

Z39.50 is an American Standard for information retrieval. The standard depicts a client-server model of computing. With reference to the Open System Interconnection (COSI)) model developed by International Standards Organization (ISO); Z39.50 is an application layer protocol. A Z39.50 client performs searching, querying and requesting functions and a Z39.50 server interfaces with the database in the remote system and responds to client requests by providing a set of records for the search query.

Z39.50 state tables describe a complex set of concurrent and serial events. A Petri net model is prepared for the entire system comprising the protocol. A Petri …

A Graphical Environment For Change Detection In Structured Documents, Girish A. Patel

Theses

Change detection in structured documents (e.g. SGML is important in data warehousing, digital libraries and Internet databases. This thesis presents a graphical environment for detecting changes in the structured documents. We represent. each document by alp ordered labeled tree based on the underlying markup language. We then compare two documents by invoking previously developed algorithms for approximate pattern matching and pattern discovery in trees. Several operators are developed to support. the comparison of the documents; graphical devices are provided to facilitate the use of the operators. We believe the proposed tool is useful for not only document management, but also …

Renin-Angiotensin System And Its Relationship To Arterial Pressure Regulation, Sami D. Saume

Theses

The renal system is known to participate in the natural regulation of blood pressure. A renal system model that simulates interaction responses of renal output to arterial blood pressure was developed. The major components of this model are glomerular filtration rate, tubular sodium reabsorption, the renin-angiotensin system, Aldosterone secretion, and antidiuretic hormone secretion. The model's differential equations were coded using Vissim 1.2 student version. It was found that, the renal output increased as glomerular filtration rate, Aldosterone concentration, and blood pressure increased. Conversely, increasing antidiuretic hormone concentration lead to decreased renal output.

Additionally, Angiotensin II and Aldosterone concentrations increased as …

Low Pressure Chemical Vapor Deposition Of Silicon Carbonitride Films From Tri(Dimethylamino) Silane, Rajive Shah

Theses

A literature study to investigate the incorporation of silicon into SiC and Si₃N₄ films from various organosilanes was carried out. The Arrhenius activation energy for the synthesis of silicon, silicon carbide and silicon nitride films from various organosilanes range from 165-210 kJ/mol. A review of recent studies have indicated that silicon deposition is the rate determining step in the synthesis of silicon from silane. It is proposed here that this hypothesis can be established for the synthesis of silicon carbide, silicon nitride and silicon carbonitride film. Limited experiments indicated that the silicon deposition is a rate determining …

Object Oriented Partitioning For A Medical Vocabulary Based On Semantic Network, Mansnimar Singh

Theses

Computers have become ubiquitous and indispensable part of everyday life both for personal use and in the workplace. Medicine is one of the few domains that has not fully adopted computerization. One impediment to this emanates from a communication gap between the computer science professional and the medical professional. Besides, medical terminology is full of synonyms and medical professionals use them according to their personal preferences. This lack of common terminology has prevented sharing of knowledge and automating data processing, resulting in the healthcare information explosion.

Semantic network models have been developed to represent medical concepts and to provide a …

Parameters' Analysis Of 3d Random Stacking Palletization, Najeeb Syed

Theses

Palletization is a very important element of production, distribution and warehousing activities. The 3D random stacking palletization method is based on volume utilization instead of surface area optimization. Random stacking provides interlocking among the boxes and hence it improves the stability of the pallet load. Volumetric Pallet Utilization is normally the prime concern of any palletization process, with Work in Process and Palletization time being also important. This research uses data generated from a previous heuristic to establish mathematical relationships between the three mentioned performance indices and also three additional indirect variables, namely: Total Number of Sub Volumes, Partitioned Remaining …

Decontamination Of Aquifers Via Air Sparging/Biofiltration : An Experimental Study, Armando Mora Tellez

Theses

In this study experiments were performed in order to show feasibility of an integrated air sparging/biofiltration process for cleaning contaminated groundwater. Feasibility was also meant in the sense of meeting regulatory constraints. Using toluene as model compound and changing flowrates for the sparged air, it was shown that despite fluctuations in the toluene concentration at the inlet of the biofilter, the concentrations at the outlet of the unit were essentially constant over long periods of time and remained below the levels dictated by environmental regulations. However an increase in outlet concentrations at levels not meeting regulatory constraints was observed after …

The Study Of Permeability In Concrete, Jie Yuan

Theses

In this study, samples of regular, high performance, expansive and the polymer concrete and mortar were prepared for test of permeability and mechanical property. In the permeability measurement, water and an aqueous chemical solution were employed as the permeant.

The test results of the samples, ranging from 5.7 x 10-9 cm/sec to 1.0 x cm/sec for the permeability and 3800 psi to 10600 psi for compression strength, indicated that the polymer coated concrete has the lowest permeability among the concretes and high performance concrete has the highest compression strength . The finding leads to the possibility that a high strength …

An Analytical Approach To Toxic Substance Replacement In Support Of Pollution Prevention, Ithan B. Zimmer

Theses

In support of pollution prevention and in accordance with Executive Order 12356 concerning pollution prevention, all federal agencies must comply with the Toxic Release Inventory (TRI) chemical release reduction and pollution prevention planning. The inventory lists hundreds of chemicals and choosing those to replace and finding actual replacement chemicals or procedures is not always clear. This study focuses on an analytical approach to this problem by understanding the application of two substances. The representative chemicals are two volatile organic compounds (VOC), ethyl ether and ethanol, used as solvents in ammunition manufacturing.

Thirteen military specifications provide the cases involving ether. Ethanol's …

Interactive Animated Storybook Based On Korean Folk Tale, Hyung-Joo Lee

Theses

The intended purpose of my project was to develop an interactive animated storybook for children based on a Korean folk tale. Unlike a traditional storybook, I created an interactive computer program for children with diverse interactive animations. I wanted to explore how multimedia design can be entertaining and educational simultaneously.

Finite Element Analysis Of Skin Injuries By Water Jet Cutting, Syed Muhammad Arif

Theses

High pressure water jets are used in industry for cleaning and cutting purposes. These devices can generate pressure up to 400 MPa. As high pressure water jets become more widespread in industry, injuries will be seen with great frequency. Penetrating injuries by these devices can produce minimal external evidence of extensive soft tissue injury. To know the extent of injury, it is important to study the relationship between operating parameters of water jet and the skin layers. A computational analysis is carried out using finite element method to find the effects of water jet pressure on the skin layer. Finite …

Analysis And Modeling Of Ultrasound Enhanced Soil Washing Process, Kamalavathany Rajaratnam

Theses

In this research, statistical analysis of data from ultrasound enhanced soil washing process was performed. The process was optimized using a statistical model. The model had four factors namely power, solvent:soil, surfactant, and dwell time as process variables. The percentage of removal efficiency was considered as the dependent variable. The results from two full and one partial factorial designs were analysed. Interactions up to third order were considered in the analysis, but the results from full factorial design showed that those of order higher than second had insignificant contributions to the removal of contaminants. Since the higher order interactions of …

Low Frequency Characterization Of A Loop Antenna, Irene Koukhta

Theses

The conventional solution of an integral equation for the loop antenna in free space can be expressed analytically using Fourier Series. However, the solutions based on delta gap feed model yield divergent input susceptance.

To overcome such diverging results, alternative solution using equivalent magnetic frill current feed models were implemented. Although low frequency models for delta gap feeds were suggested, no generalized low frequency expansions for the input admittance have been reported previously. In this work, such generalized low frequency expansion are developed for both delta-gap and magnetic frill feeds of loop antennas. Validity of such expansion have been investigated …

Mechanical Evaluation Of Pedicle Screw Fixation Of The Lumbar Spine, Ding Lu

Theses

Pedicle screw fixation of the lumbar spine has been reported to increase fusion rates A biomechanical evaluation of four different pedicle screw implant systems, (AO. Rogozinski, TSRH and Wiltse). was performed to compare intrinsic device stiffness under conditions of flexion-compression and forty-five degree off-axis flexion-compression The effect on stiffness of the loosening of device members was also studied. Testing was done in load control using an electrohvdrualic testing machine. UHMWPe blocks are used to simulate the vertebra.

Assuming that stiffness is directly proportional to the probability of obtaining fusion. this study allows the ranking of the systems tested in their …

Heat Transfer Enhancement From A Heat Pipe Immersed Horizontally In Water, Under Natural Convection Conditions, With The Aid Of Gas Injection, Evangelos J. Minakas

Theses

An experimental study has been performed to estimate the degree of heat transfer enhancement from a horizontal heat pipe, immersed in water with the aid of air injection. This thesis investigates the effects of different shroud shapes, shroud distances from the heat pipe, air injection rates, air injection configurations and air injection distances on the augmentation of heat transfer. Water was the experimental fluid and its temperature ranged from 17-60 °C, the surface temperature of the heat pipes varied from 18-75 °C.

It was discovered that the shape of the shrouds is a contributing factor on the heat transfer enhancement. …

The Relationship Between Thermoregulatory And Haemodynamic Responses Of The Skin To Relaxation And Stress, Paul O. Nketia

Theses

The present study investigated the effects of stress and relaxation on (1) EEG coherence and (2) peripheral blood flow.

EEG coherence of two meditators in two different but adjacent rooms was measured during eyes opened, eyes closed, single meditation and group meditation. The skin temperatures of the subjects together with their room temperatures were also recorded. EEG coherence plots (Cospar) showed a spread out of the alpha band to the beta, theta and occasionally to the delta wave bands during group meditation. The area above the 0.98 coherence threshold in the alpha band was greater during group meditation than during …

Design And Implementation Of On-Line Metrics, Ashok Vantipalli

Theses

The performance of a software product plays an important role in the software industry to survive the tough competition given by the other software vendors. The real test for a software product starts after its release when it is extensively used by the end users and in different environments. And the software goes through a number of tests by the end users which can be very different and insufficient from the regression tests the software vendor performed on it. This critical issue; requires each vendor to have a department mainly dealing with the testing and analysing the performance of a …

Computer Simulation Of Cerebrovascular Circulation : Assessment Of Intracranial Hemodynamics During Induction Of Anesthesia, Steven D. Wolk

Theses

The purpose of this project was to develop a computer model of cerebrovascular hemodynamics interacting with a pharmacokinetic drug model to examine the effects of various stimuli during anesthesia on cerebral blood flow and intracranial pressure.

The mathematical model of intracranial hemodynamics is a seven compartment constant volume system. A series of resistances relate blood and cerebrospinal fluid fluxes to pressure gradients between compartments. Arterial, venous, and tissue compliance are also included. Autoregulation is modeled by transmural pressure dependent arterial-arteriolar resistance. The effect of a drug (thiopental) on cerebrovascular circulation was simulated by a variable arteriolar-capillary resistance. Thiopental concentration, in …

Relative Dentifrice Abrasivity On Dentin And Enamel, Laura Marchetti

Theses

The abrasive characteristics of six (6) brands of toothpastes on Enamel and Dentin material were assessed. Human teeth were sliced to expose the dentin surface and then polished using 3 μm and 0.25 μm diamond paste. The outside surface of the tooth (after slicing) was used "as is" for the enamel surface testing. The surface smoothness was evaluated prior to testing using a surface profiler and averaging four (4) to five (5) readings across the surface for each sample.

The tooth slices were then embedded into the acrylic plate surface by routing out an area with a dental drill and …

Evaluation Of Sale Forecasting Methods : A Case Study, Susan J. Canavan

Theses

This study investigated forecasting accuracy for sales. Three quantitative and one qualitative forecasting techniques were tested and two combinational models were generated and evaluated.

Three data sets, obtained from a market leader were used to forecast sales. The series represented monthly sales for three years. Three accuracy levels were employed in this study, these are: Mean Absolute Error (MAE), Mean Absolute Percentage Error (MAPE), and Root Mean Square Error (RMSE). Results indicated that the quantitative method outperformed the qualitative method; that combining two or more quantitative methods provide better forecasts than the individual methods; and that combining quantitative and qualitative …

Assessment Of Potential Operating Benefits Incurred By Implementing Iso 14001 : Five Case Studies From The New Jersey Chemical Industry, Stefanie Gitter

Theses

Environmental management is an important aspect of strategic planning and competitiveness for many businesses. Environmental management systems (EMS) are operating policies that are established to help a company measure progress towards goals set forth in a strategic environmental plan. A growing number of EMS models are being used by countries and industry groups, so the International Standards Organization (ISO) developed one model to prevent duplicate efforts which can result when companies try to meet the import requirements of different countries.

The ISO-EMS model is a series of standards, and ISO 14001 is the first to be published. Companies will be …

Discounted Art, Johnathon Schmuck

Theses

None provided.

Hanta Virus, Rhonna Brown

Theses

None provided.

The Future Wave: Redefines Contemporary Meal Preparation And Food Shopping Protocols, George Sordoni

Theses

None provided.

The New Thaipography, Chotima Vongviriyatham

Theses

This thesis is about designing a new Thai typeface. The project attempts to increase Thai typefaces options for Thai designers. The range of existing Thai typeface selection is limited, for use in text and display situations. There are several problems of Thai typeface usage at both the display and text type level. This project focuses primarily on the development of a new typeface for use in display situations. Thai designers use a single typeface for a wide range of products without regard for the differences between the products. Through attempting to solve the problem of limited options, this project includes …