Digital Commons Network^™

Syntheses Of Single-Site Catalysts And Ethylene Copolymers With Polar Groups, Xuan Mai

Theses

Iron(II) dichloride complexes and iron(III) trichloride complexes were synthesized with a 2,6-bis(imino)pyridyl ligand and obtained in 78.7% and 47.5% theoretical experimental yield respectively. The results of the elemental analysis were in agreement with the expected values. The 2,6-diacetyl pyridine bis(2,4,6-trimethylanil) iron(II) chloride catalysts was remarkable more active than the 2,6-diacetyl pyridine bis(2,4,6-trimethylanil) iron(III) chloride catalyst. Initially, the catalysts were tested for the polymerization of ethylene, which occurred at relatively high activities (11,158 kg HDPE / mol Fe h [mon]) at 35 C. Then we copolymerized ethylene and 1-hexene using iron(III) based catalyst which also led to high activities results. We …

Synthesis Of Copolymers Of Ethylene With 1-Alkenes And 1,4-Hexadiene Using Metallocene Catalysts, Mark Pecak

Theses

Metallocene catalysts have been increasingly studied by industry and academic groups, and are starting to be applied commercially to produce a variety, among which are ethylene/ 1-alkene copolymers. This study was primarily concerned with ethylene/1 - alkene copolymerizations using dimethylsilyl-bis(2-methyl-4-phenyl-indenyl)zirconium dichloride with methylaluminoxane as cocatalyst. The effect of the 4-phenyl group was shown to greatly increase the polymerization activity of ethylene as well as the copolymerization of ethylene and 1 - hexene copolymers. The reactivity ratios, used to calculate the necessary feed ratios needed to create a copolymer with specific characteristics were also determined. The molecular weights, melting points, and …

Arts: An Interactive Medium Throughout Utilizing Abstraction, Simplicity And Harmony, Hye-Jeong Ko

Theses

Not Included

A Study Of The Development Of Higher Education Programs In Graphic Arts Technology According To The Needs Of The Printing Industry, Mahadzir Mohamad

Theses

None provided.

The Colorfood System, Mary Monkowski

Theses

None provided.

Evaluation Of Intrusion Detection Systems With Automatic Traffic Generation Programs, Friday Bassey Akpan

Theses

In this master's thesis work, a program was developed using the Perl programming language to enable user defined attack programs to run automatically. A similar program was also developed for background traffic. With this program, the different features of the Nmap exploration and scanning tool were exploited to build scenarios of attacks.

Automated scenarios of attacks running in to the order of hundreds were developed. Also, different sets of automated stealthy attacks scenarios running in to the order of hundreds were developed using the timing modes, stealthy scans and scan delay features of Nmap.

These automated attacks scenarios were employed …

The Technical Communication Industry : A Study Of Today's Job Requirements In The United States, Maria Conte

Theses

Technical communication, "the process of gathering information from experts and presenting it to an audience in a clear, easily understandable form," (Society for Technical Communication) has grown more popular in the last decade, even as an academic discipline (Staples and Omatowski xi).

The growth of the technical communication profession has led to an increase in skill requirements needed to obtain a position as a practitioner.

This study, using Glaser and Strauss' Grounded-Theory approach, identified the requirements of today's technical communication job candidates by examining recent technical communication job advertisements in ten of the top newspapers in the United States. The …

Firewall Interface For Java Ftp Smtp And Http Servers, Ratan Kumar Erukulla

Theses

The objective of my thesis is to develop a firewall interface for FTP, HTTP and SMTP servers. A firewall interface is a graphical user interface (GUI) to configure the properties of the server. Using this interface, we can spy a user, block and unblock the IP address of a client, display statistics of user and server. We can track all the user actions while he is connected to the server. These actions are logged and based on the log data we can deny access to users performing illegal operations. All the servers and interfaces are written in Java. Java was …

In Situ Laser Etch-Depth Monitoring Of The Deep Reactive Ion Etching Process, Yuki Imura

Theses

A laser-based method for measuring feature thickness during the deep reactive ion etching process is investigated. Interference occurs between laser beam reflections from the mask surface, the mask/silicon interface, and the exposed silicon surface of a process wafer. Information from this interference signal allows the etch process to be characterized. Three methods are investigated: laser-on-SiO₂, laser-on-photoresist, and laser-on-both SiO₂ and silicon at a mask edge.

The measured data from these experiments are found to be in good agreement with theoretical calculations. Differences in reflected beam amplitude and interference fringe frequency represent well the differences SiO₂ and …

Liquid-Liquid Mixing In Stirred Tanks With Varying Liquid Depths, Sunil Mehta

Theses

Considerable attention has been devoted in the past to the determination of the minimum agitation speed, N_cd, required for the complete dispersion of two immiscible liquids in mechanically stirred tanks. When this situation is achieved the dispersed phase is no longer present as a distinct layer, such as a light oil phase above an aqueous solution, but becomes completely dispersed, in the form of droplets, throughout the continuous phase. The achievement of the dispersed state is of significant importance in many industrial operations. Nevertheless, the effect on N_cd of a number of operating variables remains poorly understood. …

Numerical Study Of Pneumatic Conveying Of Powders, Muhammad Mushahid Rafique Quereshi

Theses

The dense phase mode may be advantageous over the dilute phase mode, for some pneumatic conveying problems, because it causes less erosion of the pipeline, less attrition of the material, requires less dust collection and is effective even for smaller pipe diameters. The objective of this study is to numerically determine the parameters that govern the formation slugs in dense phase conveying. The distributed Lagrange multiplier/fictitious domain method (Glowinski et al. 1998 and Singh et al. 2000) is used to perform direct simulations of the motion of solid and gas phases in pipes with rectangular cross-sections. In this approach the …

Analysis Of Gene Expression Data Using Expressionist 3.1 And Genespring 4.2, Indu Shrivastava

Theses

The purpose of this study was to determine the differences in the gene expression analysis methods of two data mining tools, Expressionistic^TM 3.1 and GeneSpring^TM 4.2 with focus on basic statistical analysis and clustering algorithms. The data for this analysis was derived from the hybridization of Rattus norvegicus RNA to the Affymetrix RG34A GeneChip. This analysis was derived from experiments designed to identify changes in gene expression patterns that were induced in vivo by an experimental treatment.

The tools were found to be comparable with respect to the list of statistically significant genes that were up-regulated by more …

Integrating Tolerances In G And M Codes Using Neural Networks, Vijay Kumar Sundareshan

Theses

Continuous integrated solutions from CAD down to the preparation of NC programs were developed in the recent years. However, if tolerances should be considered, the interaction of human experts is still necessary. A way to fill this gap in the production process is shown in this thesis. The study builds a relationship between the given design tolerances and including these tolerances in machining by generating respective G and M codes. The study focuses on physical phenomena and their inter-relationship while manufacturing. For example how the speed of machining, torque, power, depth of cut, etc. influences machining under specified tolerances. Artificial …

Hydrological And Geotechnical Investigation Of A Sparta, New Jersey Landslide, James Talerico

Theses

On August 13, 2000, a massive landslide occurred in Northern New Jersey following an extreme rainfall event during which 14.1 inches of precipitation fell locally during a 24-hour period. The slide, with an estimated volume of 22,000ft³, traveled up to 1,500ft in a short period. While landslides do occasionally occur along the coastal bluffs of the Atlantic Coastal Plain, slides of this magnitude are uncommon in the glacial soils of the New Jersey Highland section.

The investigation of this landslide was compiled through rainfall data and geotechnical data, which was used to determine the triggering mechanism of the …

An Interface Chip For Saw Based Sensor In An Ad-Hoc Network, Yagneshwara Ramakrishna Vadapalli

Theses

The design of a smart integrated chemical sensor system that will enhance sensor performance and compatibility to ad hoc network architecture remains a challenge. This work involves the design of an interface chip for a Surface Acoustic Wave (SAW) based chemical sensor where the sensor reflects the RF input and introduces a time delay proportional to the concentration of the vapors absorbed by it. The interface chip detects the frequency shift as a function of the chemical species absorbed by the sensor and alerts the ad hoc network controller when a monitored parameter exceeded some threshold, based on local processing …

The Challenges Of Hypertext Writers : A Case Study, Nandita Das

Theses

This thesis examines the challenges of hypertext writers with respect to six aspects of writing: authority, audience, organization, document design, style and multimedia use. This study is primarily based on the theories presented in the three books-Jay David Bolter's Writing Space, George P. Landow's Hypertext 2.0 and Ilana Snyder's Hypertext. Information is collected by means of structured interviews from Bolter and Snyder. This study reveals that the hypertext medium does pose challenges to writers who are used to writing for the print medium and are new to the hypertext medium. Hypertext environment requires that the writer should either …

Electrohydrodynamical Manipulation Of Particles Based On Dielectrophoresis, Oleksii Vasylyschuk

Theses

The movement of matter in a non-uniform electric field, termed dielectrophoresis, is of interest to scientists of various branches: physics, chemistry, engineering, and life science. To chemists and physicists it is a science of many varied phenomena. To engineers it is a source of new and useful techniques for separating materials or improving materials’ behavior. To ecologists it provides a major means of minimizing pollution. To life scientists it offers new ways to study and manipulate cells and their subparticles, and to help unravel the nature of living systems.

The purpose of this thesis is to concentrate on some aspects …

Reconsidering Restoration, Brian Hoffner

Theses

What does the process of ecological restoration actually produce? For some restoring nature is a point of no contention. By replacing ecosystems that have been damaged by human interference, humans are taking proper responsibility for their actions. However, the environmental ethics community is all but in agreement over humans' obligations to damaged ecosystems. Some in the field claim that it is human's responsibility to perform "wild gardening", through restorations, to "our" environments. While other philosophers insist that these acts produce "faked nature".

This thesis offers a compromise vision of the meaning of restoration. The author uses the concept of Autonomous …

The Development Of A Biodegradable Scaffold For A Tissue Engineered Heart Valve, Thomas Adam Alheidt

Theses

In the current state of medical technology, there exists the need for a quality medical device to replace a failing heart valve. Presently, mechanical valves as well as donor tissue valves, either from humans or animals are used to replace failing heart valves. These valves although they can operate in the heart satisfactorily are not equal to the body replacing its own valve. Tissue Engineering in simple terms is the field of helping the body replace its own failing organ. In scientific terms, Tissue Engineering is a relatively young field, a majority of the major advancements have come in the …

Vlsi Design Of Stability Routing Protocol For Sensors In Wireless Mobile Ad-Hoc Networks, Vishnu M. Mandava

Theses

This thesis gives a detailed description of the Application specific integrated circuit (ASIC) design of Stability routing protocol for sensors in mobile ad-hoc networks. The Stability routing protocol is based on the signal strength and position components during data transmission while considering sensors in an ad-hoc network. A general ad-hoc network has unpredictable and variable mobility patterns therefore the signal strength criteria is adopted for routing. Signal strength criteria has been proved to be efficient for communication between the mobile nodes without any data loss. In this thesis an architecture for a processor implementing stability routing protocol for effective communication …

Implementation Of A Two-Dimensional Discrete Element Method To Describe Granular Materials Composed Of Elliptical Cohesionless Particles, Juan Jose Martinez Alvez

Theses

This work is aimed at developing a discrete element simulation that models the contact between elliptical grains or particles in granular materials. The goal is to implement an algorithm to carry out collision detection between ellipses as well as ellipsoidal objects. The practical issue here is that the real shape of macroscopic grains can be approximated better using elliptical curves than using spherical curves. In addition, the simulation model will also be valid for spheres, since these objects are special cases of ellipsoids.

An accurate contact detection algorithm was investigated by means of two different formulations. The first formulation determines …

Characterization And Corrosion Of Bcc-Tantalum Coating Deposited On Aluminum And Steel Substrate By Dc Magnetron Sputtering, Chirag Joshi

Theses

Tantalum is one of the most versatile highly refractory corrosion-resistant metals. Tantalum coating can be used as an effective corrosion barrier if it is continuous, free from defects and it adheres well to the substrate. A DC magnetron sputtering technique was used to deposit tantalum on aluminum and steel. X-ray diffraction measurements revealed that the tantalum films produced by sputtering had two crystallographic structures: a body centered cubic α-phase and a metastable tetragonal β-phase. Tough and ductile alpha phase tantalum is preferred over the hard and brittle beta phase tantalum, as a protective coating. Alpha phase coatings were successfully deposited …

Computer Simulation Of Automotive Disc Brake Noise, Vadims Milovs

Theses

Disc brake noise continues to be a major concern throughout the automotive industry despite efforts to reduce its occurrence. Many articles are written on this subject, but there still is no agreement on what exactly causes disc brake noise and what part of the braking system is responsible for it.

The goal of current research was to build a simplified but inclusive mathematical model of a disc brake system and investigate it using Matlab software. The twodimensional model including damping, Stribeck effect and stick-slip friction was built.

The model is unique in a way that all the similar models have …

Functional Annotation And Dendrogram Representation Of Gene Expression Clustering Results, Antoneta Petkova Vladimirova

Theses

The advances in genomic sciences have created vast amounts of gene expression data. To make sense of the expression information, various techniques have been applied. Clustering is among the unsupervised methods used to group the results according to gene expression level. Dendrogram visualization allows graphical representation of the clustering. The aim of this thesis is to enhance these techniques by adding another layer of functionality, namely, annotating the dendrogram with gene functional information. Presented is an application which visualizes yeast clustering results as a dendrogram along with color-coded gene keyword annotations. Gene keyword information was extracted from a major biological …

A Method For Developing In-Silico Protein Homologs, Susan Mcclatchy

Theses

Computational methods for identifying and screening the most promising drug receptor candidates in the human genome are of great interest to drug discovery researchers. Successful methods will accurately identify and narrow the field of potential drug receptor candidates. This study details one such method.

The method described here begins with the assumption that novel drug receptors have high sequence similarity to established drug receptors. The similarity search program FASTA3 aligns translated sequences of the human genome to known drug receptor sequences and ranks these alignments by measuring their statistical significance. Query results returned by FASTA3 are assembled into "in-silico proteins" …

What Happened To Permanence? Case Studies Of Four United States Museums And How They Document Ephemeral Artworks, Elizabeth A. Peters

Theses

No abstract provided.

The Parish Council Of St. Bernadette's: An Exercise In Communication Competency, Reverend A Vito

Theses

No abstract provided.

The Portrayal Of Gender In Print Advertisements, Nanette M. Vela

Theses

No abstract provided.

The Psychodynamics Of First Generation Italian-American Daughters, Lina Allocca

Theses

No abstract provided.

The Secret Lives Of Knighs: Achieving Public Honor And Private Love In Chretien's Cliges And Lancelot, Jodi E. Henkel

Theses

No abstract provided.