Digital Commons Network^™

Buteo Jamaicensis: The Red Tailed Hawk, Richard Sensenbach

Theses

None provided.

Closet Photography, Alida Cronin

Theses

None provided.

The Development Of Type Forms, Wayne Roth

Theses

None provided.

Control System For Hydraulic Hybrid Propulsion System, Vratislav Michal

Theses

A control system for a Hydraulic Hybrid Propulsion System (HHPS) is proposed and specified. Performance of the control system is evaluated by means of digital computer simulation of the total propulsion system. In order to accomplish this, analytical models of HHPS components are developed. The simulation consists of a city bus negotiating a typical driving cycle developed for this purpose on the basis of actual city bus cycle data. Performance of the control system is found to be satisfactory in all phases of driving cycle with the exception of transition from acceleration to cruise.

An Approach To Tone Reproduction For Converting Transparencies To Reflection Prints, Mark Mccormick-Goodhart, Andrew Macica

Theses

The purpose of this investigation was to study the useful criteria for converting transparencies to reflection prints, and examine the unavoidable departures from the criteria. A single useful criterion was found; that the relative brightness of the reproduction match those of the original. One significant compromise appeared to be in the shadow reproduction in low maximum density reflection prints. It was found that like reflection prints, transparencies do not typically reach relative brightnesses as low as zero. Thus, only a relatively small departure from the 1:1 criterion was likely . Flare in the camera system and viewing conditions limits the …

A Metalsmith's Guide To Toxicology, Margery Beth Rose

Theses

Not listed.

Large Deflection Of Thick Elastic Belts, J. L. Sisson

Theses

Not listed.

Distinguishable Density Levels In Image Recording Of Earth Resources Satellite Data, Steven Beiser

Theses

The Earth Resources Technology Satellite (ERTS) system produces a large volume of images of the Earth, with exposed film as the final output. These Images are presented to the user in pictorial form for interpretation and analysis. Specifications for this output film include MTF requirements, development method requirements, geometric tolerance and the number of DDL's (distinguishable density levels). Given the specification of 64 levels of gray, with a minimum density range of 2.0, the following investigation is warranted. Using theoretical calculations, granularity will be determined at different density levels. Assuming that Selwyn's Law is valid for the range of apertures …

Application Of The Finite Element Method To The Solution Of Maximum Fillet Stresses In Loaded Projections, Victor Biller

Theses

This thesis analyzes a geometric configuration under a loaded condition and establishes location and magnitude of the maximum fillet stress by the use of the Finite Element Method. Results are compared to Heywood's published study.

A Room, Ned Behnke

Theses

The purpose of this thesis is to make a series of heavy paintings on the concept of limited space using oil on canvas. The concept of "limited space" can be best illustrated in a series of rooms. I intend to accompany these with a poetic diary which will describe my techniques and will present the ideas which I included in the painting such as reflection in color. The "diary" will not be chronological, but related in the order of ideas. I will present the ideas which I have incorporated into the painting of the room especially those regarding how I …

Performance Analysis Of A Black Liquid Solar Collector, Jackson Trentelman

Theses

The performance of a black liquid, sheet flow solar collector has been investigated both analytically and experimentally. In addition, its performance has been compared to that of a baseline collector of the tube and fin design. The black liquid solar collector was predicted to exhibit an instantaneous efficiency improvement of 10-15% over a well designed tube and fin collector. This result was confirmed experimentally. Long term efficiency calculations indicate similar performance improvements over long term use. The major contribution to improved efficiency was found to be the direct absorption process whereby a) the collector efficiency, F’, is unity and b) …

Some Reactions Of 2-Chloroethanesulfonyl Chloride, Paul Zielinski

Theses

PART 1: THE FORMATION OF 2-METHYLAMIN0-N-0CTADECYLETHAHESULF0NAMIDE FROM 2-CHLOROETHANESULFONYL CHLORIDE. 2-Chloroethanesulfonyl chloride (2) was reacted with octadecylamine (3) in the presence of triethylamine to give N-octadecylethcnesulfonamide (4), which was reacted with methylamine to give 2-methylamino-N-octadecylethanesulfonamide (1). The first reaction involves formation of the sulfonamide and dehydrohalogenation. The second reaction is a Michael addition. The formation of 1 is favored in a polg.r, protic medium. An aprotic, less polar medium produces an unwanted di-Michael adduct CH3N(CH2CH2S02NHCl8H37)2 (8), and polymer. The intramolecular hydrogen bonded structure of 1 is discussed. PART 2: THE FORMATION OF ETHYL ETHENESULFONATE FROM 2-CHLOROETHANESULFONYL CHLORIDE OR ETHENESULFONYL CHLORIDE; A …

Illuminated Porcelain Forms, Janet Kellner

Theses

None provided.

A Comparison Of The Effects Of Viscous And Immersion Processing On Small Image Sizes In Originals And Duplicates, James Fahnestock

Theses

A test target with three two bar groups was designed around the DIM microfilm standards. It was produced photographically on a litho film. This target v/as used to discover the factors significant in determining small image sizes and spacings in a microfilm. A 16 mm film holder was designed and built to facilitate the microfilm imaging process. Second and third generation images were made using a liquid-gated contact printing prodedure. It was found that the optical image size an the film at the time of exposure, the image generation, and the optical image size and the density interaction were significant …

The Photograph As Symbolic Presentation Of Subjective Reality, Abigail Perlmutter

Theses

None provided.

Identification Thresholds Of The Human Visual System For An Alphanumeric Resolution Test Object, Mark Bobb

Theses

Many investigations of the detection threshold of the human visual system have been conducted, and a few recognition threshold studies can be found, however no identification threshold data are available. This paper documents research on the observer's identification threshold for an alphanumeric resolution test object presented at various average luminance levels, contrasts, and contrast polarities. These factors affected the identification threshold in a similar way to the effects they exert on the observer's detection and recognition thresholds; the test object contrast being the most significant factor. Direct numerical comparisons between the various thresholds were not possible due to the large …

The Effect Of Targets Having Selected Line Width To Space Width Ratios On Spurious Resolution And Resolving Power, Milner Noble

Theses

Six radial targets having different line width to space width ratios were made. The effect of the ratios on the phenomena of spurious resolution and resolving power was studied on a fine grain and a coarse grain film. Spurious resolution patterns were undetectable when the dark space exceeded five times the width of the bright line. Resolving power values reached their maximum when the target contained lines that were one-fifth the width of the dark spaces between them.

A Communication Program For The Comprehensive Regional Development Plan, Steven Tagg

Theses

None provided.

The Thermodynamics Of Electrolytic Solutions, Eric Robert Bixon

Theses

The thermodynamic properties of solutions of electrolytes may be accurately determined by the measurement of the activity of the s6lvent. when the. solute is nonvolatile, this quantity may be obtained from measurements of the lowering of the vapor pressure caused by the presence of the dissolved solute.

An experimental method has been devised to measure this effect using a semi-conventional Othmer Still. The experimental apparatus has been constructed. and evaluated. Data has been-obtained for the vapor pressure lowering of methanol due to the presence of dissolved electrolyte for five different electrolyte-methanol systems. An extrapolation technique was developed to make use …

Design And Construction Of A Glass Casting Furnace, Lawrence Livolsi

Theses

None provided.

Rap And Produce: A Thematic Communication Program, Paul Schulte

Theses

None provided.

A Comparison Of The Properties Of Conventional Offset Ink And Ultraviolet Ink, Vanchai Sirichana

Theses

Some of the advantageous characteristics of ultra violet ink are said to be the absence of pollution and reasonable energy consumption as well as rapid drying (curing). Little is published about physical properties or print quality. Printers require information in this regard because the reports which are presently available are not clear and lack in detail. If the printability of UV inks were equal to that of conventional offset ink, this ink would be close to an ideal ink. This work was under taken so as to compare the properties of ultraviolet ink with conventional offset ink. The inks selected …

A Quantitative Examination Of A Particular Set Of Process Inks To Determine The Effect Of Color Sequence On The Ink's Hue And Saturation Characteristics, Philip Giammatteo

Theses

The purpose of this study is to determine if there is a proper press sequence for a specific set of process inks on a specified type of paper. In the past, the literature on this subject has been of a qualitative and generalized nature. This study attempts to put the matter on a quantative basis under strict controls. A standard set of process proofing inks for web offset are chosen to be printed onto a coated type of offset paper by an IGT Printability Tester. Various techniques are devised for printing solid strips of the inks with minimum density variation …

Image Mechanisms In Screenless Lithography, Charles Martin

Theses

In conventional lithography, a halftone screen is used to photographically convert the continuous- tone image of the original into a grid of very small, closely spaced dots of constant density but varying areas. Screenless or continuous-tone lithography is a printing process capable of reproducing images with gradated tones without the use of a halftone screen. Screenless lithography has a high quality potential because it has few of the inherent problems that limit the quality of the halftone process. This thesis investigates the image mechanisms in screenless lithography and in particular the role of variable water receptivity. It was hypothesized that …

An Integrated Approach For The Design Of A New Braille Printing System, Albert Barzilai

Theses

The braille production system is a slow and antiquated process. The end product is expensive, heavy, and bulky. A new, more efficient braille production system was designed, using computerized transcription, thermographic printing, and automated binding and finishing. Computerized transcription programs are readily available from a variety of sources; automated binding and finishing is a common feature of modern printing technology. A series of experiments was performed to evaluate the physical qualities of the braille cells produced by thermography. An internal tearing resistance test and machinability test were also performed to study the effect of heat on the paper stock. The …

The Relationship Between The Relative Legibility Of Textual Material And Resolving Power In A Microphotographic System, John Compton

Theses

The application of microphotographic methods for the processing and storage of information has grown steadily during the last two decades. The microphotographic system, through which the information must pass at a minimum is as follows: Step 1: Photographing of the original document at a large reduction onto a silver halide microfilm. Step 2: Duplicating through contact printing onto a non-silver photographic material. Step 3: Second generation duplication onto a nonsilver photographic material (This image may be used on a microfilm reader). Step 4: Enlargement of the second generation duplicate to give a hard copy print. One of the main objectives …

Studies Of The Characteristics Of Different Grained Surfaces On Some Typical Lithographic Wipe-On Plates, Porntawee Pungrassamee

Theses

Four different types of grains of wipe-on lithographic plates (mechanical grains, a chemical grain and an electrolytic grain) were studied. The experiments were divided into two parts. The first part concerned surface characteristics of the grained plates, and the second one involved plate performance on a press. The grained plates' characteristics, including coarseness, gloss, directionality and depth of grain, were examined mechanically, optically and visually. The limitation of each method was discussed. The effects of the surface structures on coating thickness were reported. The experiments on the press were designed to find which grained plate produced the best printing qualities, …

The Landscape, 1975, John Cox

Theses

None provided.

The Effect Of Blue Base Tint On The Sensitivity And Acutance Of X-Ray Films, Michael Klein

Theses

An experiment was devised to quantitatively measure the effect of blue base tint (inherent in most medical x ray films) on the sensitivity and acutance of an x ray film. Results showed no significant difference due to the blue base tint for sensitivity. However, a significant difference was found for the base tint's effect on acutance of an x ray film. It was determined that the difference in acutance was due to an "anti–halation effect" of the blue base dye.

Imagery Of The Subconscious, Thomas Petit

Theses

None provided.