Digital Commons Network^™

Electrodeposition Of Cellulose And Carboxy-Methylcellulose, Charles Edward Driesens Jr.

Theses

The previous work done by Frank Cozzarelli on the eleotrodeposition of cellulose from a sodium zincate-urea-cellulose system has been verified, except that zinc was found to deposit on the cathode at all voltages and current densities within the range of the optimum conditions for deposition. The optimum conditions are: voltage - 1.10 to 1.28 volts; current density 0.13 to 1.10 amperes/square foot; electrode material - copper. Current efficiencies range from 0.80 to 5.53%.

A chelate-like complex formed from the sodium zincate and urea which couples with the cellulose has been proposed as a possible explaination of the mechanism governing the …

Effect Of Concentration On The Mass Transfer Coefficient In The Liquid Film, Marvin Baker Schaffer, Philip Major Pomerantz

Theses

The effect of liquid concentration on the resistance to mass transfer across the liquid film is studied for an acetone-methyl isobutyl ketone-air system in a packed tower. The liquid film resistance is computed by measuring the overall resistance for various concentrations and subtracting the gas film resistance. The gas film resistance is determined at the same liquid and gas rates by measurements on the pure components.

In the theory developed to handle the calculations, it is assumed that the interface temperatures are the wet-bulb temperatures based on a dynamic equilibrium. This supposition is supported experimentally at a liquid rate of …

A Study Of The Functional Stability Of Sunscreen Compounds, Jesse Howard Starkman

Theses

Previous work reported in literature, indicates that commercial sunscreen compounds were subject to breakdown on exposure to ultraviolet radiation with consequent change in their functional efficiencies.

These findings ware retested under conditions more closely approximating actual usage.

A new method of evaluation which closely correlates to actual experience in large scale usage, was applied. This method provides, from simple spectral data, a reliable index of physiological efficiency of the sunscreen compound. As a result, twelve commercial sunscreen compounds were exposed to ultraviolet radiation for varying periods. Analysis indicated that, contrary to the previous reports, no significant Changes in physiological efficiency …

The Recovery Of Krypton From Dilute Gas Mixtures By Elution Techniques, David Graham Brown

Theses

An analytical method has been empirically developed for the analysis of dilute inorganio inert gas mixtures.

The method is based on a combined sorption-elution technique which makes possible the resolving of complex inert gas mixtures into their constituents.

Particularly the recovery of krypton from dilute gas mixtures was accomplished. Recovery efficiencies were as high as ninety-eight percent, while the average krypton purity was better than ninety-nine percent.

Bis Phenol Epichlorohydrin Condensate Modification Of Alkyd Resins, Raymond Francis Carmody

Theses

A method is given for the modification of alkyd resin systems with Bis-Phanol Epichlorohydrin Condensates.

The properties of the modified alkyd resins are evaluated using similar unmodified alkyd resins as reference.

A theory of linear esterification is postulated.

The Analogy Between Heat And Mass Transfer In Packed Beds, Jasper Joseph Correnti

Theses

An operation which recurs in many branches of chemical engineering is that in which a fluid - gas or liquid - is passed through a bed of granular solids for the purpose of removing from, or adding something to the fluid (or both). In the oil and sugar industries, oils or syrups are passed through beds of adsorbents to remove impurities causing color and other undesireable effects. In the recovery of volatile solvents, air charged with solvent vapor is passed over solid adsorbents. In leaching, liquids are passed through beds of solids to remove some constituent of the solids. In …

Prediction Of Vapor-Liquid Equilibria, Daniel James Mchale

Theses

Several equations for predicting vapor-liquid equilibria from the physical properties of the components have been proposed in the literature. Two equations of this type proposed by O. Redlich and others have been investigated to determine their utility.

Results indicate the two equations give fairly satisfactory results for nearly ideal solutions, but are unsatisfactory for non-ideal solutions. Knowledge of molecular interactions in the solution would be necessary before the predictions could be used with confidence.

Power Characteristics Of Disc Type Agitator Impellers, Isadore Rubin

Theses

Experiments were conducted to determine the power required to drive disc type agitators and to observe the flowpattern and type of agitation produced in a baffled tank.

Power was measured by determining electrical energy input to a motor and subtracting motor transmission and friction losses previously established by calibration. Impellers were operated at speeds from 600 to 3700 RPM.

Power requirements in the turbulent flow region were correlated by the equation HP = PoL⁵N³ρ/550gc which was derived theoretically.

Reports of previous work on agitator power are discussed.

The Power Numbers (Po) established for the turbulent range, …

Isobaric Heat Capacity Of Propylene Over A Wide Range Of Temperature And Pressure, Joseph Patrick Tassoney

Theses

This work was done to make possible more accurate design calculatioas for processes that require accurate data on the heat capacity of propylene at elevated temperatures and pressures.

The effect of pressure and temperature on the isobaric heat opacity and the heat capacity at constant volume for propylene relative to the ideal gas state is presented. The results cover pressures from 0 to 9,500 PSIA and temperatures from 350°F. to 2240°F.

An equation was derived from the Benedict-Webb-Rubin equation of state. This equation gives the deviation from the ideal gas state of the isobaric heat capacity of propylene for the …

A Generalized Correlation For The Effect Of Pressure On The Isobaric Heat Capacity Of Gases, Alvin Harvey Weiss

Theses

A generalized correlation is submitted for the deviation of the isobaric heat capacity of hydrocarbons from the ideal state. The range of conditions included is from reduced pressure = 0.2 - 15 and reduced temperature = 1.0 - 5.5. The curves presented have been based on data calculated from the Benedict - Webb - Rubin Equation of State, which is believed to be the most accurate method presently available for caleulating the heat capacity deviation.

The results indicate that the order of magnitude of the correction ts quite large, especially in the critical region. The average absolute error of this …

The Effect Of Reduced Pressure On Variables In Distillation, Joseph Peter Cummins

Theses

To determine the effects of reduced pressure on pressure drop and holdup in distillations seven different liquids were distilled at varying rates at atmospheric pressure and under vacuum at pressures down to 50 mm Hg, using protruded stainless steel packing. Pressure drop and holdup were found to vary exponentially with masste at each pressure. At constant mass rate pressure drop was higher for decreased head pressure. Use of material of higher molecular weight led to lower pressure drop at same rate and pressure. Greatest effect of pressure on pressure drop was observed below 300 mm Hg. Liquid holdup was not …

Variation Of Thickness Of Hard Anodic Films, Alphons Raymond O'Konski

Theses

An investigation was made of the effects of varying processing conditions on the thickness of anodic films produced by the Martin Hard Coat (4) process on commercially pure aluminum and nine aluminum alloys.

This study was conducted to provide sufficient data for designing coating thicknesses on aircraft accessory parts that would conform to the close tolerances maintained in the course of manufacture of precision components. Coating thicknesses up to 0.0051 in. were obtained. Changes in electrolyte strength, temperature of the bath, alloy composition, and current density were made to see their effect on the thickness of the film and growth …

Application Of Theory To Extrusion Of Polyethylene, Ernest Edward Griesser

Theses

This thesis reviews the theory of isothermal melt extrusion beginning with the writings of early researchers up to its present state. The isothermal extrusion of a near-Newtonian liquid is compared to polyethylene, using five different extrusion screws, and calculated discharge rates are compared to the actual rates for both materials. A method of calculating forward flow was developed and this was shown to provide very good correlation with actual dis-charge rates.

Non-isothermal or plasticating extrusion of polyethylene was also studied and comparison is made to isothermal melt extrusion. The results obtained with the various types of screws studied are also …

Evaluation Of Benedict's Equation For Calculation Of Critical Pressures Of Hydrocarbon Mixtures, Thomas William Owens

Theses

An introduction to the problem of critical pressure calculations of mixtures is presented, followed by a brief history of prior work in this field. Mentioned in the history are the correlations of Watson and Nelson, Smith and Watson, Mayfield, Kuratta and Katz, Benedict, and Edmister. Another section contains a series of tables showing critical pressure calculated by Benedict's equation as contrasted to other data appearing in the literature. An evaluation of the equation is then made from the comparisons.

Included are curves of the values shown in the tables end a series of curves depicting the deviation of these values …

A Study Of Methods For Predicting The Change In Azeotropic Composition With Pressure And With Temperature, Adolf Joseph Pribush

Theses

No abstract provided.

Graphical Correlation Of Pressure Drop In Adiabatic Flow Of Compressible Fluids In Pipes, Guy Edward Straub

Theses

Analytic equations for the flow of compressible fluids in conduits with friction are awkward to solve, since the variables involved usually necessitate trial and error solution. A study of the situation indicated that a series of graphs for different values of the specific heat ratio would eliminate the trial and error solution.

The purpose of this paper is to present in graphical form a solution of the equations relating the ratios of the pressure and temperatures in adiabatic flow of compressible fluids to the friction and velocity.

The equations for adiabatic flow of compressible fluids in horizontal ducts of constant …

The Recovery Of Elemental Phosphorous From Phosphorous-Bearing Sludges, Rajendra Nath Bery

Theses

The theory dealing with the propagation of phosphorus sludges in elemental phosphorus production is generally well known, but it has long been felt that an investigation should be made in order to devise a suitable process whereby it may become possible to effect a separation of phosphorus. It is perhaps unfortunate that while the development of the electric furnace process continued, it sometimes overshadowed the importance of recovering additional amounts of phosphorus by relatively simple and inexpensive means since this is considered vital to the economics of elemental phosphorus production. At the present time, there is no economically feasible process …

Jacket Heat Transfer Coefficients In An Agitated Vessel, The Paddle Agitator, Herbert Palfrey Pursell

Theses

Four papers have been published which correlate variables affecting heat transfer through a jacket in a kettle agitated by a paddle type agitator. There are differences in the equations resulting from each of these papers. In none of these papers was variation of the stirrer diameter or stirrer width considered.

It is the purpose of this paper to show that all published data in such a system can be correlated by a single equation which differs from those previously presented. Preliminary recalculation of published data indicated that a relationship exists which involves the stirrer width and diameter. Experimental work was …

The Influence Of Agitation On A Continuous Counter-Current Liquid-Liquid Extraction Column, William John Hartmann

Theses

This work presents operating data and correlations of agitated extraction equipment studied under continuous counter-current flow.

The experimental work was carried out in at agitated column 36 inches in length with an internal diameter of 2 inches using the system toluene, benzoic acid and water. The working section of the column was 24 inches. The design of the column used for the experimental work is similar to that proposed in a patent by van Dijck (3). The column is similar only to the extent that the patent covers numerous conditions of vertical agitation.

The distribution data and the equilibrium solubility …

The Development Of Executives, Joseph Ralph Messineo

Theses

The ever-increasing trend toward improved industrial efficiency creates the problem of supplying capable executives. The supply of executive manpower in business corporations ever needs replenishing. Expansion of operations, retirements, and other circumstances cause executive demands and vacancies which must be filled. Therefore, the purpose of this thesis is to analyze and report on what industry is actually doing today to develop executives to meet present and future requirements. Also, it is the author's intent to formulate a comprehensive executive development program that can be adopted with some limitations by industry for the building of an executive reserve.

In order to …

Isobaric Heat Capacity Of Ethylene Over A Wide Range Of Temperature And Pressure, Robert John Sibilia

Theses

The effect of pressure and temperature on the isobaric heat capacity at constant volume for ethylene relative to the ideal gas state is presented. The results cover pressures from 0 to 10,000 FA and temperatures from 32.0°F to 2372.0°F.

The deviation of the isobaric heat capacity of ethylene from the ideal gas state for the wide range of pressure and temperature covered was found from an equation derived from the Benedict-Webb-Rubin equation of state. Graphs and tables relating the deviation of the isobaric h capacity: the deviation of heat capacity at constant volume, pressures and temperature are included.

The results …

Vapor-Liquid Equilibria, Binary Mixtures Of Methyl Alcohol, Isopropyl Alcohol And N-Butyl Alcohol With Benzene, William Andrew Flynn

Theses

No abstract provided.

Manual For Quality Control, Frank Andrew Antalec

Theses

Modern trends of industrial development have been directed toward increased output of products with greater precision and uniformity. This necessitates an inspection function that reflects more effective results than ever before. In order to rise to this occasion full use must be made of today's principles and techniques of inspection and quality control.

Industry demand the use of high precision measuring instruments to aid the inspection function in obtaining effective results. Recently, however, the techniques of Quality Control have become a well-known, useful, tool for the solution of many manufacturing problems. Effective use of these techniques depends on their complete …

Cost Reduction Through Closer Control Of Quality, Walter Robert Kuzmin

Theses

The economy of our nation differs today from that of World War II or pre-World War II days by the fact that a war-production program is being carried on without adversely affecting the production or civilian goods, At the same time management is confronted with rising costs due to the inflationary spiral of wanes and materials. To mire a profit on Products and remain in competition, management is forced to apply the latest cost reduction methods. Because of the dual economy, companies are quoting on civilian goods and war Products. Contracts released by the government specify that; adequate inspection and …

Isobaric Heat Capacity Of Methane Over A Wide Range Of Temperature And Pressure, Edward W. Sledjeski

Theses

No abstract provided.

Piles And Pile Driving, Robert W. Van Houten

Theses

This thesis on the subject of "Piles and Pile Driving" has been written to fulfill one of the requirements for the granting of the degree of Civil Engineer by the Newark College of Engineering. The material contained in this thesis has been gleaned from many books, catalogs, magazines and from the author's own experience. Much still needs to be accomplished in the field of research but this can be done only through the cooperation of the companies who are engaged in this work and have the equipment necessary for making many tests under actual field conditions.

The author wishes to …

Cuprous Oxide Rectification, Philip G. Cobb

Theses

It has been shown that cuprous oxide, when formed from a copper surface by suitable heat treatment, has remarkable rectifying properties towards alternating voltages applied through the oxide and copper. The purpose of our work was to investigate, the effect fully from all angles possible, and especially from those considerations affecting the constancy and permanence in the electric circuit.

The work ranged from furnace operation to tests of completed units, and further to the development of a theory explaining as completely as possible this rectifying property.

It soon became apparent, that here was ideal thesis material, and so, with proper …