Digital Commons Network^™

Computer Aided Mathematical Modeling Of A Once Through Claus Type Sulfur Recovery Process, Yuriy Osyp Kutny

Theses

The computer aided mathematical modeling of the once through Claus process for hydrogen sulfide conversion to sulfur is presented herein. This vapor phase oxidation reaction is carried out using one thermal reactor and up to three bauxite catalytic reactors with sulfur condensers in between. The method of catalytic reactor feed reheat and its ramifications upon reactor performance and total model convergence is of major importance.

The reactor feed preheat can be carried out in either of the following ways: (1) indirect heat exchange using some external heat source; (2) indirect heat exchange using other hot process streams as heat source; …

Stress Analysis Of A Pressure Vessel By The Finite Element Method, Hsin-Te Liao

Theses

The objective of this paper is to take a finite element program, called ANSYS, to analyze the surface stress distribution of a thin-wall pressure vessel with a spherical head.

The computer program ANSYS, which primarily applies the principle of virtual work in solid continuum, has been used to solve shell problems with quadrilateral element. Problems solved are: <1> hoop stress <2> meridional stress (<)3) maximum shear stress.

In this paper, the theoretical finite element formulation of axisymmetric elasticity of the ANSYS program is presented.

Finally, some numerical examples of shells with spherical heads of various radius are given. The solution obtained from ANSYS is very …

The Kinetics And Mechanism Studies Of A Polymer Powder Coating On Metal Surface By Cathodic Electrodeposition Process, Wen-Lin Wu

Theses

A polymer dispersion of fluorocarbon with solid constent in the range of 10-25% were prepared from white powder polytetrafluorethylene (PTFE), emulsifier combination of dodecylbenzyldimetlyl sulfonium chloride and Trition N-150, and other components or additives. Such a fluorocarbon dispersion is very stable against coagulation and has a pH in the range of 8-10, which is especially suitable for powder coating purpose.

A new electrocoating technique, which is called cathodic electrodeposition powder coating method, was conducted in this study. This new coating method includes four steps: pretreatment, electrocoating, drying and baking. Two kinds of degreased metal substrates, aluminum and steel plates, were …

Waveform Analysis Using A Micro Computer, Dakshina K. Murthy

Theses

Harmonic analysis through a micro computer was performed at Brookhaven National laboratory to determine the magnitude and extent of hormonic dIstortionon in their electrical power supply system. DT 2801 Hardware and MADCAP software were used to accomplish the Harmonic anylysis through forier transform.

The Design Of An Order Processing System, Michael Montrose

Theses

The writer of this thesis was once involved in the order processing function with the company studied and recognized that there is a need for a better method of processing customer orders that could be applicable to other companies.

The company studied is considered a "high tech" company, meaning that it is engaged in the design; manufacture, and sale of the latest state of the art products that employ modern computer technology. It is ironic that this company, on the leading edge in its field; is in great need of reform in the office methods used to order its products. …

An Analysis Of Different Desalination Processes, Vahe Garabed Hovsepian

Theses

The object of this thesis is to study the various modes of desalination and analyze the energy and economic requirements. The desalination methods discussed are, single stage desalination, Long tube vertical Evaporator, Multistage Flash distillation, Solar Energy method, Freezing method, Reverse osmosis & Electrodialysis.

It was found that for vapor reheat process at 350°F input 639 ft-lbs/lb product required 2.01 kw-hr/100gal. product and the total cost 51.6c/1000gal.

Not one process is best for everyone. In countries close to the equator, the solar energy method is the best. Most other countries depend on flash distillation process, etc. So we can't draw …

Design And Evaluation Of Performance For The Multi-Microprocessor System, Sang-Soo Lee

Theses

A tightly coupled multiple-microprocessor with two MPU's that can be run at different clock speeds has been built and tested. The method of interconnection for this multiprocessor is a timeshared common bus with shared memories having a tightly coupled architecture. The signal timipg of the multiprocessor system for different speeds has been investigated using a logic analyzer for simulation modeling. The desired timing results have been obtained. According to the timing results, the simulation model for the General Purpose Simulation System has been correctly designed and performance of the multiprocessor system for the various clock speeds has been evaluated by …

A Study Of Hazardous Wastes Generated In New Jersey With Regard To The Siting Of Waste Disposal Facilities In The State, Shreerang Narayan Dharasker

Theses

The effective treatment and disposal of hazardous wastes is one of the most urgent problems facing the State of New Jersey today. New Jersey is the most densely populated state and is a leader in industry. Nearly every major industry in the nation is represented by one or many production units all of which generate copious amounts of hazardous and toxic wastes each year. Although the state has the toughest rules and regulations on the management of hazardous waste, there are very few options exercised or facilities cited for the effective treatment and disposal of wastes within the state boundaries. …

Osmotic And Mean Activity Coefficients Of Cacl2, Nai, Libr And Licl In Ethanol At 50 Degrees C, Gregory J. Czerwienski

Theses

Vapor pressure depression data for CaCl₂, NaI, LiBr, and LiCl were measured at a molality ranging between 0.2-7.5 depending on the solubility of the salt in ethanol. Data were also measured at 35° C for the LiCl. The apparatus used was a recirculation still of the Othmer type.

Osmotic coefficients were calculated from the total pressure of the system. The one parameter Bromley equation and the three parameter Pitzer equation were used to correlate the data. For all the systems, the Pitzer equation correlated the data better as one would expect. Mean activity coefficients were calculated graphically and …

Biodegradation Of Phenol And 2-Chlorophenol Using A Fill-And-Draw-Reactor, Chi-Chun Tsai

Theses

The biological degradation of phenol and 2-chlorophenol was studied at room temperature in a microprocesser controlled fill-and-draw reactor using activated sludge from the Passaic Valley Sewerage Commissioners wastewater treatment plant (Newark, New Jersey). The reactor was cycled through four unit processes: fill, react, settle, and draw. Different cycle times were tested, and the system response was characterized by dissolved oxygen measurements and substrate analysis (by gas chromatography).

With inhibitory substrates, such as those tested, this reactor had much more flexibility, and was therefore much easier to operate, than a standard continuous flow reactor.

Effect Of Humidity And Moderate Temperature On Microcircuit Failure, Antoine Mikhayel Chaia

Theses

The increased use of microprocessors has brought forth many questions concerning the reliability of these devices.

This research discuss the TTL integrated circuit failure rates, and provides information on the effects of temperature, device complexity and packaging on TTL failure rates under storage condition of 100% R.H. (Relative Humidity) and 100°C and no added humidity at 100°C. Other factors which can affect failure rate are also discussed, including designs, materials process.

Approximately 200 microcircuits of TTL (74LS00) were subjected to extend life testing at 100°C; where 125 chips are tested at 100°C ± 2° and no added humidity and the …

Nervous System Simulation, Jian Chen

Theses

This thesis deals with the nervous system simulation. The Hodgkin-Huxley model and Stein's model are used as basic tools. The author has tried to describe some practical problems by mathematical models.

First, the horse-shoe crab eye is investigated. Light intensity is reported to the brain by the firing frequency of the photoreceptoe. A Poisson process is used to simulate the stimulus to the receptor. The result of the stochastic model coincides with the theoretical one: receptor overlapping decreases the resolving power of the eye; and the lateral inhibition compensates the effect of overlapping.

Second, a nerve muscle model was set …

A Closed Form Image Force Function For Deposition Of Particles In A Cylindrical Tube, Hsi-Chung Chiou

Theses

This study investigated the behavior of charged particles suspended in a laminar steady incompressible flow in a cylindrical tube under the influences of image , inertia , viscous and gravitational forces. A new expression for the image force was obtained by introducing an approximate potential energy function. The velocity profiles employed in the analysis were uniform and parabolic.

The governing equations derived were based on Newton's second law of motion and were solved by a Runge-Kutta numerical method. The results were obtained for different values of Q, a dimensionless inertia-charge parameter. For a value of Q equal to zero the …

An 8052 Ah - Basic, Based Development System, Suresh Vishwanath Leley

Theses

This project exploits the latest in microcontrollers-an entire environment for developing and prototyping a microcontroller application. With one key chip, a little glue, and a Dumb terminal a powerful system is achieved at a vanishingly small cost. This "one chip" system is adequate for realizing a wide range of applications calling for a small computer or an embedded processor.

Besides economy of system cost, the turn around time from concept to functioning application can be extremely short, even when the development engineer is not particularly well acquainted with traditional assembly language and microprocessor development practices. This economy is achieved by …

A Computer Aided Manufacturing System For Small Quantity Prototype Board Production, Santiago Garcia-Perez

Theses

A matrix addressed manufacturing tool has been built, tested, and integrated in a system aimed to exploit wire-wrap wiring technology for protoboard production in small quantities. Extensive software exploits the power and economy of the personal computer as a superb manufacturing tool and documentation system. Computer graphics are used as a visual aid that takes advantage of the cognitive capabilities of the human mind and eliminates the boredom and high costs involved with heavy automation achieving instead a tolerable level of human engagement with significantly increased efficiency. The approach presented is new and delivers substantial gains in productivity. The software …

Realization And Implementation Of A Recursive Digital Convolution Algorithm In Cmos, Lik Tang Cheng

Theses

This thesis describes the implementation of a digital convolver. A recursive digital convolution algorithm was realised and implemented by using CMOS circuitry. This thesis also gives a technical overview of current CMOS processing technologies as well as various novel CMOS logic circuit techniques.

Implementation Of Finite Element Method On A Microcomputer, Chi-Yuang Huang

Theses

A finite-element program FEM2D has been implemented on a PHILIPS microcomputer. The program has a generation preprocessor and thus makes finite-element analysis on a microcomputer considerably easier than before, since it allows models to be created and edited much faster than by manual method. The interactive program FEM2D prompts the user to input data directly from the screen. It is convenient for the user, both in teaching and learning.

The FEM2D is a two-dimensional finite-element program capable of solving two-dimensional problems, such as plane elasticity, heat transfer and imcompressible fluid flow problems. It is developed with a formulation of a …

Characterization Of Microorganisims After Feeding With Phenolic Compounds : Comparing A Domestic Sludge To An Industrial Sludge, Dianne Adamowitz

Theses

This study examined the effects of phenolic compounds on the populations in mixed liquors obtained from two very different treatment plants: the Passaic Valley Sewerage Commissioners plant in Newark, and the Livingston, NJ municipal treatment plant. The dominant organisms were identified initially and after ten days exposure to phenol (100 ppm), and either 2-chlorophenol (20 ppm) or 2,6-dichlorophenol (10 ppm) in aerated batch reactors.

Results confirmed the remarkable similarity between the two mixed liquor populations, in spite of the significant differences in the operation of the two treatment plants.

Physical And Mechanical Properties Of A New Type Of Polymer Concrete, Kyan Bin Khoo

Theses

A new type of Polymer concrete is an admixture of a special Latex, Portland cement and Sand. It has high bond strength, quick curing, durability and adequate strength. The Mechanical and Physical properties were investigated in this paper. Reinforcement with Glassfiber was done and its properties compared to those of control specimens. The heat generation in Polymer Concrete (PC) and its relationship with the properties of PC was also investigated.

A new type of Polymer concrete is an admixture of a special Latex, Portland cement and Sand. It has high bond strength, quick curing, durability and adequate strength. The Mechanical …

Dispersion In The Laminar Flow Of Ellis Model Fluids Through Straight Tubes, Yeong-Hua Huang

Theses

Taylor-Aris dispersion theory is extended to the laminar tube flow of Carreau model fluids and Ellis model fluids and the results are compared with those of power law fluids. It is found that Carreau and Ellis models are more appropriate than power-law model, especially at low pressure gradient.

An exact solution to the unsteady convective diffusion equation in fully developed laminar flow in tube is obtained by applying the generalized dispersion theory of Gill and Sankarasubramanian for Ellis model. The results are compared with those obtained by Booras and Krantz for power-law model. The most interesting result of this work …

The Conversion Of The Process Flowsheet Simulator, Flowtran, For Fortran 66 Based Mainframe Computers, Timothy Edward Roche

Theses

The process flowsheet simulator FLOWTRAN was converted from FORTRAN 77 code to FORTRAN 66 code. The conversion was accomplished by developing a number of subprograms to handle FORTRAN 77 intrinsic functions that are missing in the FORTRAN 66 standard and by altering the code to take advantage of the developed subprograms. Also developed were a set of procedure files for executing the FORTRAN 66 FLOWTRAN on a Sperry-Univac 90/80-4. The new FLOWTRAN was tested and performs identically to the FORTRAN 77 version. The FORTRAN 66 FLOWTRAN can be installed on any mainframe computer with a FORTRAN 66 compiler.

Applications And Evaluation Criteria For Robotic Systems, Brijan Shirish Badshah

Theses

The robot industry is one of the fastest growing industries. In almost every area of manufacturing, robots are being considered for one or more tasks, but the success of any commercial industrial undertaking has to be measured in terms of financial performance.

To help practitioners in the manufacturing area, an economic analysis and investment appraisal technique for robotic systems is developed, especially to assist managers in making the crucial decision about utilizing an industrial robot. An interactive microcomputer program is developed which performs the economic analysis for cost justification and helps managers to decide whether the implementation of a robot …

Comparison Of Several Manufacturing Techniques Used To Produce A Sterile Antibiotic Powder, Antonio Joseph Barberio

Theses

There are several manufacturing processes (crystallization, spray drying, freeze drying, and closed crystallization) that are used to produce a sterile antibiotic powder. A pharmaceutical manufacturer is faced with the problem of deciding which process is best suited for their operations. The purpose of this thesis is to propose a comparison technique that might aid in a solution to this problem. In the first step of the comparison technique, a fixed rating is assigned to a number of different categories (i.e. initial cost of equipment, product purity, etc.) for each process. The fixed ratings were established from an industrial survey, and …

Modelling Of Pile Load Tests In Weak Rock, Daniel Walter Caruso

Theses

The purpose of this thesis was to investigate the loss of load capacity of relaxed pile groups driven into weak bedrock. This was accomplished in the laboratory using a dynamic driving apparatus equipped with a static load testing system. The static load testing system applied loads hydraulically, and the load settlement behavior was monitored using an electronic load cell and a linear variable differential transducer (LVDT).

Tests were performed using 1" diameter steel pipe piles driven in a five pile group pattern at spacings of two diameters and four diameters. Piles were driven into a simulated rock mass consisting of …

An Inventory Model For The Specialty Chemical Industry, Paul Murchison

Theses

The specialty chemical industry is a unique segment of the chemical industry. This industry produces chemical intermediate products for the pharmaceutical, agricultural, cosmetics, and other chemically related industries. Most of the products that are produced are covered by patents or involve proprietary know—how. The specialty chemical products are a minor part of a total formulation but contribute unique properties to the end product. This feature of specialty chemicals gives the manufacturer unusual pricing power compared to producers of commodity chemicals. This industry has proven to be very competitive, profitable and in the forefront of the present automation revolution over the …

Replacement Of Surface Ducted Rays Near Caustics With Guassian Beams, Carlos Javier Ruiz

Theses

Conventional approach to a solution of a wave propagation problem in an inhomogeneous medium is to utilize either rays or modes to represent the wave field. Asymptotic ray theory (ART) starts to fail in the vicinity of caustics due to rays experiencing many reflections. Even uniform representations do not properly correct this deficiency of rays when caustics start to pile up in the far range. One possible alternative is to replace these rays with modal bundles and remainders [1]. A promising technique using Gaussian Beams has been used to represent the total field due to a point or a line …

Human Factors In The Design Of Computer Application Software, Curtis Springstead

Theses

The use of computers in business has expanded tremendously over the past two decades. This expansion has been possible due to increasing economies within the computer industry, and in spite of the lack of consideration shown for the users of such data processing systems. The popularity of computers has compelled users to expand their list of requirements from a computer system so that it includes ease of use.

This thesis attempts to bring together many widely dispersed studies and principles that can affect the ease of use of interactive computer systems. The material has been organized according to five components …

Study Of The Effects Of Pumping Pressure On The Properties Of Fresh Concrete, Dinesh Vithal Kenkre

Theses

This thesis has a two-fold objective. One, to develop a suitable testing apparatus in the labaratory to simulate the effect of field pumping of concrete and two, to conduct some preliminary tests to investigate the feasibility of the testing apparatus.

Pumping of concrete has been practiced in the U.S.A. since 1930. The behaviour of concrete in a pipeline has not been studied in much detail while development in the pumping technology raced ahead of the research in this field. Previous studies done in this field have clearly indicated the need for a laboratory simulation of pumping process in order that …

Preparation And Properties Of Monomers Derived From Hydroxyhexyl Methacrylate For Dental Adfesive, Ren-Dar Ku

Theses

Although methacrylic acid is the simplest unsaturated carboxylic acid and its hydroxyl ester polymerize readily, yielding useful resins, no adequate study of the preparation and application of the higher hydroxyl alkyl methacrylates has been published. The commercially important hydroxyethyl and hydroxypropyl methacrylates are manufactured from the appropriate alcohol in the presence of sulfuric acid, a method which appears to be less suitable for production of higher hydroxyl alkyl methacrylates. The purpose of the present work was to prepare the hydroxyhexyl methacrylate (HHMA) by a generally applicable method and determine its common physical properties. In addition, the urethane methacrylates were synthesized …

An Analysis Of Minimum Shift Keying From The Viewpoints Of Quadrature Multiplexed And Multi-H Continuous Phase Modulation Signaling, Alfred Anthony De Seta

Theses

Minimum Shift Keying (MSK) is a bandwidth efficient modulation scheme which offers superior performance over Quadrature Phase Shift Keying (QPSK) and Offset Quadrature Phase Shift Keying (OQPSK). This paper discusses these modulation techniques from a quadrature multiplexed signaling viewpoint and compares them in terms of error performance, bandwidth properties and bandlimiting and hardlimiting effects. MSK is also considered as a special case of a multi-h Continuous Phase Modulation (CPM) signal and the Viterbi algorithm is presented as an optimal detection scheme for this class of signals. A computer simulation is performed with the VA as the detection mechanism for an …