Digital Commons Network^™

Microcomputer-Controlled Respiratory Rate Monitor, David John Hartmann

Theses

In order to measure the metabolic change in an animal due to the administration of anti-obesity drugs, an instrument was constructed which will allow the continuous sampling of twelve individual animals residing in enclosed chambers. The instrument is based on the principle of Indirect Calorimetry, which measures metabolic rate by sampling the inlet and outlet concentrations of respiratory gases (oxygen and carbon dioxide) of the chamber. The system is controlled by an IBM PC which will control six chambers or twelve chambers simultaneously.

The system assesses the metabolic rate of the animal by calculating the Respiratory Quotient (RQ) and the …

A Computer-Based Microwave Interferometer Instrumentation System As A Non-Invasive Cardiopulmonary Monitor, Chin-Yee Eric Ho

Theses

The system comprises a microwave interferometer as a computer-based non-invasive cardiopulmonary monitor. The microwave interferometer records the mechanical vibration of the chest wall. The objective is to determine whether the signals may have diagnostic value and to evaluate the instrument as a non-invasive and non-contacting cardiopulmonary monitor.

With the help of a computer it is possible to analyze the mechanical vibration of the chest wall produced by the heart and thereby detect, and possibly categorize, cardiac abnormalities. This system is able to process two channels, the first signal from microwave interferometer records chest wall vibrations and the second signal is …

Apap: The Arithmetic Pipeline Analysis Package, Chang-Chieh Lin

Theses

This study is aimed at the development of an interactive PC-based package for simulating data flow within an arithmetic pipeline in multiprocessor systems. The user constructs the arithmetic pipeline, specifying the functionality of each segment, the intersegment connectivity and pipeline inputs and outputs. After defining reservation tables and data, analysis is performed with the results available in tabular, simple graphic and animated graphic forms.

APAP allows the user to design hardware and analyze its functionality with-out building the circuit, an economical alternative. Even when circuits are to be built, APAP allows the user to correct logic errors before implementation, leaving …

An Analysis Of The Second-Order, Type-One Hilbert Phase-Locked Loop, Inn-Shian Lin

Theses

In this thesis, a second-order, type-one PLL ( Phase- Lock, Loop ) in which the usual lead-lag loop filter is paralleled with a Hilbert Transformer (the whole system is called HPLL) is analyzed. A motivation for the study was that earlier researchers have found improved performance if Ilse lead-lag network is paralleled by a differentiator, result mg in the so called ERPIM (Extended-Range Phase-Locked Demodulator). For the purpose of com-parison with earlier experimental and analytical results on the PLL and the ERPLD, the numerical results in this thesis ale based on the parameters of Acampora and Newton.

The basic characteristics …

Simulation Study Of The Multi-H Continuous Phase Modulation, Min-Ling Lin

Theses

Of particular interest in satellite communications are modulation techniques that have a relatively constant envelope and are power and bandwidth efficient. Attempts have been made to satisfy these requirements by using phase and frequency modulation formats. Recently, one approach has been researched which combines the modulation and encoding functions, which is referred to as multi-h continuous phase modulation. Simultaneously good power and bandwidth efficiencies can be achieved at the expense of increased complexity.

This report examines the performance of multi-h continuous phase modulation by a simulation. A multi-h phase coded modulation is generated, passed through the AWGN transmission channel. The …

Contrast Sensitivity Measurement Via Evoked Potential, Ken-Gen Lu

Theses

This work is concerned with the use of the visual Evoked Response (VER) to determine Contrast Sensitivity in humans. For this purpose, a system has been developed where signals, obtained from scalp electrodes, and stimulated by visual grating patterns, are recorded digitized and processed on a personal computer (IBM compatible). Processing includes signal averaging and digital filtering. The system provides storage, retrieval and graphic representation of data as well as the capability to transfer data to other computer systems. Data processing includes parameter estimation of suitable signal models, which provide effective data compression of the signal into a finite set …

An Improved Method Of Gas Chromatographic Determination Of Trace Organic Vapors In Ambient Air Collected In Canisters, Yong-Jin Shen

Theses

An improved method for analysis and quantitation of volatile organic compounds in ambient air has been developed. Samples are collected in evacuated SUMMA polished stainless steel canisters using a sampling flow apparatus with a critical orifice as flowrate controller. Analysis of VOCs in the collected air is carried out by cryogenically concentrating the sample, then thermally transfering it onto the head of a capillary column in a gas chromatograph. The column effluent is measured by a parallel flame ionization detector (FID), and electron capture detector (ECD). The problems associating with quantitative transfer of the sample to the initial cryofocusing loop …

Sorptive And Geotechnical Characteristics Of Kaolinite, Chi-Yuan Shih

Theses

The sorption/desorption behavior of phenol and chlorobenzene as well as their influence on geotechnical characteristics of kaolinite were studied. The results reveal that the sorption process follows closely with the Freundlich adsorption isotherm whereas the sorption/desorption ratio depends upon the characteristics of organic compounds.

A series of geotechnical properties tests was also undertaken after achieving equilibrium at different concentrations of organic compounds. It was found that the parameters such as liquid limit, plastic limit, optimum moisture content, and dry density increase with an increasing-concentration of organic compounds.

The relationship between the geotechnical, properties and sorption behavior of soils provides the …

System Performance Criteria In Cdma Networks Using Gold Codes, Yong H. Kim

Theses

First, we have presented the autocorrelation and crosscorrelation properties for periodic and aperiodic binary sequences. The generation of binary sequences using shift registers with feedback was reviewed. We have also included correlation properties for the Gold codes.

Next, we discussed Gold code generation for the balanced and unbalanced Gold codes.

Thirdly, we investigated the number of simultaneous users in a CDMA system using Gold codes for the worst case and the average case of mutual interference.

Finally, we simulated the probability of interference exceeding a threshold value, and the average crosscorrelation value caused by interference in a CDMA network which …

Use Of Recirculation Reactor To Study Biodegradation Of 2-Chlorophenol, Kai-Chung Yang

Theses

The performance of immobilized cells in the treatment of hazardous waste was investigated using a recirculation flow reactor run in a batch mode. A mixed microbial population from a municipal wastewater treatment plant was immobilized in calcium alginate gel. The bio-oxidation ability of these microbes towards a model toxin (2-chlorophenol) was studied. The process parameters studied were as follows:

1. Flow rate of the recycle stream;
2. Biomass loading;
3. Spiking concentration of 2-chlorophenol;
4. Use of buffered vs. non-buffered defined medium.

Dissolved oxygen concentration was monitored using a flow Clark-type dissolved oxygen probe. Oxygen consumption was correlated with the biodegradation of 2-chlorophenol. Physical …

Use Of Recirculation Reactor To Study Biodegradation Of Aroclor 1242, A Polychlorinated Biphenyl, Babu S. Sanji

Theses

The performance of immobilized microorganisms in the detoxification of hazardous waste was investigated using a recirculation flow reactor, run in a batch mode. A mixed microbial population from a wastewater treatment plant was immobilized in calcium alginate gel. The bio-oxidation ability of these microbes towards a model toxin Aroclor 1242 (R) (PCB 1242) was studied.

A non-ionic surfactant (Triton X-405 (R)) was used as a medium in the enhancement of the solubility of Aroclor 1242 in aqueous phase.

Dissolved oxygen concentration was monitored using a flow Clark-type dissolved oxygen probe. Oxygen consumption was compared to the biodegradation of Aroclor 1242. …

Investigation Of Forces In The Course Of The Water Jet--Work Piece Interaction, Hung-Yuan Li

Theses

This study is concerned with the dynamic of the interaction between the water jet and the work-piece. The piezoelectric transducer was used to construct an experimental setup. The simultaneous use of the constructed setup and strain gage enables us to validate the experimental procedure. The forces in the impingment zone were measured at different operational conditions. Totally about 400 different combinations of these conditions were tested. It was found that the force is mainly determined by the diameter of the sapphire. The effects of the abrasive size , abrasive flow rate, the diameter of the carbide tube, and the stand-off …

Design And Development Of An Infrared Ccd Camera, John Frederick Romanowich

Theses

An infrared CCD camera system was designed and developed for operating various sizes of Schottky-barrier IR-CCD image sensor chips. The camera has a digitally programmable frequency synthesizer for operating the 160 X 244, 320 X 244, and 256 X 256 image sensors developed at the David Sarnoff Research Center. The electronics of the camera are designed to provide the outputs required for operating a XYZ monitor, a standard TV monitor, or a computer workstation. At the core of the camera design is a RS-170 standard sync generator that supplies the waveforms for synchronizing the camera's circuitry to produce a composite …

Design And Construction Of A Thermoelectric Calorimeter To Measure Thermal Resistance Of Building Components, Ravindra Samtaney

Theses

The steady-state thermal resistance of a building wall is an important parameter in determining its thermal performance. In-situ measurement of thermal resistance is the only unambiguous way of determining thermal resistance since the actual value may significantly differ from the laboratory or the calculated R-value.

Hitherto, the in-situ measurement of thermal resistance has been largely confined to the winter season. A thermoelectric calorimeter was designed, constructed and tested in order to provide measurements of thermal resistance during the summer as well as the winter season.

This thermoelectric calorimeter is a rectangular box, insulated on five sides and covered with an …

An Investigation Of Electrical And Physical Properties Of Reactively, Diode Sputtered Silicon Nitride Thin Films, Divyang Manharlal Shah

Theses

Silicon nitride thin films were deposited by r.f. reactive sputtering of silicon in nitrogen and argon discharge. Biased and unbiased modes of diode mode sputtering were used. Typical parameters for a sputter deposition run were: base pressure, 1-2x10-6 torr; sputtering pressure, 5-7 mtorr; nitrogen partial pressure, 15-16%; cathode-anode gap, 4 inch; r.f. power, 200-250 watts; cathode voltage, 1.8-2.1 V r.f.; water vapor pressure, 20-30% of the base pressure. The film thickness and the refractive index were measured by ellipsometery. The films of thickness 300-2500A, refractive index 1.9-2.1 and resistivity 10101Ω — cm were obtained. The deposition rate was in the …

Seizure And Wear Testing Methodology, I-Tsung Shih

Theses

In this work the seizure as an adhesive wear has been discussed and analyzed The diffusion hypotheses is accepted as the seizure mechanism. It was determined that the surface of machine components, material properties, and contact stresses in sliding and loading zone are responsible for the wear.

A computer controlled wear testing methodology has been developed and a wear testing machine has been designed and assembled. The tests for the selected gray cast non and alloy steel specimens with different surface treatment were performed on the designed wear testing machine.

The test results showed that the selected materials with additional …

Investigation Of High Shear-Rate Viscoelastic Flow, Sudarshan S. Sood

Theses

The object of this study is to understand two important characteristics exhibited by viscoelastic fluids at high shear-rates, and analyse their influence on practical applications Viscoelastic fluids, such as polymer solutions, when subjected to high shear stress, behave in a manner which has not been sufficiently analytically explained In experimental studies, such fluids have shown.

(a) Stress relaxation.

(b) Decrease of viscosity with an increase in shear rate.

(c) Slight decrease of viscosity with temperature.

(d) Normal stress differences in shear flow.

In this thesis an analytical explanation is given for two (a and b ) of these features This …

Friedman's Model Of Calculating The Optimum Bid Price Using Dbase Iii Plus, Selim Uzel

Theses

The micro-computer program, BIDCALC presented in this thesis is offered as simple, practical, and proven approach to developing an effective data-based competitive bidding strategy. BIDCALC is written in dBASE III Plus programming language for MS-DOS based computers.

Main purpose of the program is to evaluate the optimum bid using the Friedman's model of Maximizing the Expected Profit. At the same time the program keeps track of necessary competitor and project information in data base files which are easily transferable to other software packages. The program is capable of generating a variety of reports in a matter of seconds.

BIDCALC is …

Investigation Of The Characteristics Of The Kerf And The Surface Generated In The Course Of Cutting Titanium With Abrasive Waterjets, Ajay Vora

Theses

The effect of cutting parameters on the quality of cut in the course of cutting Titanium (Gr.2) with Abrasive Waterjet is investigated. The cutting parameters include nozzle traverse rate, size and feed rate of abrasives and nozzle(s) diameter. The width of kerf (top and bottom ), taper and roughness is studied. The measurements are tabulated and plots are made to study the trend and relationship for each set of parameters.

The qualitative conclusions are made successfully but no quantitative relationship was derived. Suggestions are made for the evaluation of technology for feasibility and economic justification, and to achieve desired cutting …

Schema Based Wiring Tool : A Computer Network And Cad Design System, Jia Jing Zhang

Theses

For the purpose of building a SBC-8052-Basic micro-controller based instrument system, a new SCHEMA II Computer Aided Design system for IBM-PC is used to enhance circuits design routine, and it is described here. The new features of this CAD are discussed, and the design example of a new version of the SBC-8052-Basic micro-controller is given here in detail.

Since the wiring board system is adopted as tool of the laboratory development and controlled by the QL microcomputer, and since SCHEMA II CAD, on the other hand, is used on the IBM-PC-AT, communication between the two microcomputers is accomplished, and the …

C/Ku Band Satellite Television Reception System, Costas A. Economides

Theses

The purpose of this thesis is to examine and investigate the design of a satellite reception system able to receive most C and Ku band North American geostationary satellites' TV transmissions. The performance criterion used for the system design is based on a required demodulated video signal-to-noise ratio maintained for a specified percentage of time in conjunction with overall cost considerations.

Furthermore, a computer program written in FORTRAN 77 is developed, which among other functions lists the notified, operational, geostationary satellites in sight with their corresponding look angles, from any given location on the earth.

Ibm/Xt-Based Automatic Monitoring Instrumentation System For Eating Behavior Studies In Rats, Binghong Gui

Theses

An auto-feeding system based on the IBM-XT microcomputer has been designed for use in the anti-obesity research program in the Pharmacology Department at Hoffmann-La Roche Inc. By using this system, experimental rats can be automatically fed, some which have been given anti-obesity drugs and some which have not. The system can also collect data, such as eating times and food intake, which are used for studying the rat's eating behavior.

The system is designed to control thirty six cages with one experimental rat in each cage and it performs three functions:

1 ) To automatically dispense a preset quantity of …

A Dynamic Set-Based Multiaccess Protocol For Local Area Networks, Parul S. Nanavati

Theses

The packet-broadcasting technique brings together the advantages of both packet switching and broadcast communication. The central problem of a packet broadcast network is conflict resolution among the users sharing the broadcast communication link. Collisions are the major source of transmission errors which degrade the performance of a LAN. Proposed here is a novel multiaccess protocol which offers full communication resources to the user at low traffic requirements. It dynamically adjusts the number of users allowed to access the medium at heavy traffic requirements such that number of collisions are reduced and thus maintains the efficient utilization of the medium and …

Microprocessor Testing And Computer Aided Diagnosability Of Digital Circuits, Shirish Patel

Theses

Computer Aided Diagnosability Of Circuits (CADOC), a new method is developed for isolating and pin-pointing a faulty device in digital circuits. CADOC is based on graph-theoretic principle and PFD numbers. Without considering any SA1 or SAO faults, we can zoom out faulty device by selecting different diagnostic path to narrow down the faulty region and to isolate the faulty device. The efficiency of this new technique is confirmed by applying the technique to many examples.

Reliability Evaluation Of Liquid Crystal Displays Under Accelerated Test Conditions, Ishatdev Singh Rathore

Theses

This thesis deals with the recent study of reliability of liquid crystal displays. This study determined the effects of high temperature on LCD reliability. To accomplish this, reliability life testing was done on different kinds of LCD samples under different operating conditions. The tests were carried out on the samples of two different vendors at two different temperatures. No humidity was added in any test.

Vendor No. 1

1. 120 units at 77° ± l° C.

2. 80 units at 85° ± 1° C.

Vendor No. 2

1. 60 hard and 60 soft glass units at 77° ± 1°C.

2. …

Culture Analysis In A Merger Environment, Dorairaj Sharathram

Theses

The effects of the merger upon the People Express Airline company is studied with particular emphasis upon changes in corporate culture and structure.

A case study approach utilizes an extensive literature search and interviews with People Express executives. It is confirmed that the structural change has led to the cultural change.

With a unique style of management structure and culture, People Express, due to its own mistakes and problems, quickly lost its market share and allowed itself to be taken over by Continental Airlines a subsidiary of Houston based Texas Air Corp.

It is interesting to note that the corporate …

Analysis Of Spread Spectrum System Using Direct Sequence Technique In Jamming Environment, Kandarp A. Vyas

Theses

A spread spectrum system is a means of transmitting data over a channel In addition it offers a wide variety of features like data security and signal hiding This work studies in detail a spread spectrum system using direct sequence binary phase shift keying. The Sliding Correlator and Sequential Detector techniques have been used to achieve synchronization. A brief study of pseudorandom noise has been presented. System was simulated on UNIX using 'c'. A modified version, suitable for software implementation, of Sliding Correlator and Sequential Detector was, used. Results generated using tins model are presented here.

The State And Future Of Televised Professional Training Systems, Robert Michael Brady

Theses

This paper investigates the topic of televised professional training -- that is training and educating managers and technical professionals via live or videotaped television broadcasts. The investigation begins with a description of how some typical educational networks operate; it then goes on to analyze in a strictly theoretical sense, some of the advantages and disadvantages that such a system would have compared with the traditional methods of offering continuing education; it then discusses the results of two specially prepared surveys -- one addressed to the administrator/manager, and one addressed to the student. These areas are then united in a final …

Temperature Dependent Reliability Of Plastic Packaged Microcircuits, Wasim Ahmed

Theses

Increasing power and power densities in new high complexity semiconductor devices are creating heat removal problems. Increased powers produce higher junction temperature which lead to potentially faster degradation of device reliability. Thermal management at device level packaging involves efficient and cost-effective removal of dissipated thermal energy from the device to assure its reliable performance over the long term. In the context of very high levels of integeration of future ICs, thermal management will mean making such devices possible close to the limits of acceptable high temperature.

The major factors affecting heat flow in a plastic Dual-in-line-packages (DIP'S) are investigated using …

Performance Of Single Dwell Serial Synchronization System, Chan-Yee Hsiung

Theses

By using the sampling theorem, the problem of the detection of a signal in white Gaussian noise, reduces to the consideration of the sum of the squares of statistically independent Gaussian variates. If the transmitter and and receiver are not synchronous, then no data transmission is possible and the decision statistic has a central chi-square distribution. Otherwise, the decision statistic has a non-central chi-square distribution. Also, this. paper presents a method to calculate the mean and variance of the acquisition time which are the most important parameters to evaluate the performance of a PN spread synchronization system. In addition, the …