Digital Commons Network^™

A Stereo Vision Technique Based On The Multi-Positioned Camera Criterion, Jie Bao

Theses

A modified feature based stereo vision [sic] technique is described in this thesis. The technique uses the curve-segments as the feature primitives in the matching process. The local characteristics of the curve-segments are extracted by the, Generalized Hough Transform.

A set of images of a scene, which are taken by a multi-positioned camera satisfying the parallelism criterion, are first filtered by the Laplacian of a Gaussian operator in different widths, i.e. coarse to fine channels. At each channel, the Generalized Hough Transform is applied to the curve-segments in each image. The curve position, the curve-length, the curve centroid, the average …

Simulation Of Random Packing Of Hard Spheres Using Monte Carlo Method, Sung-Ho Park

Theses

A computer based method of generating a random packing of hard spheres is described. Using a Monte Carlo method as employed in the field of Computational Statistical Physics, packing of hard spheres are generated and analyzed.

The mean packing fractions for the present assemblies of 1000 spheres are 0.555±0.015 after pouring and 0.582±0.018 after 10 cycles of shaking. These values are approximately 5 to 6 per cent lower than the experimental results of G.D. Scott[30], but similar with the result of Visscher & Bolsterli [17].

The mean coordination numbers are 5.97 and 6.33 for the pouring and shaking case, respectively. …

Design And Analysis Of Movable Boundary Allocation Protocol, Karun Sekhri

Theses

The increasing digital communications traffic will require very high speed networks. The use of high communication speed increases the ratio between end to end propagation delay and the packet transmission time. This increase causes rapid performance deterioration and restricts the utilization of the high system bandwidth in broadcast channel based systems. Using several parallel channels in place of a single channel improves this ratio. For a given system bandwidth the total system capacity is increased by bandwidth division and parallel communication. FTDMA protocols have been suggested for the parallel channel network and these protocols are suitable for different loads. In …

Multiprocessor System Design Tutor : Expert System Approach, Rakesh Kamdar

Theses

To increase computational bandwidth and system resilience, integration of several microprocessors in a single system becomes necessary. The overall throughput and efficiency of such a system is directly dependent on the hardware and software interconnection supported by the basic microprocessor chip. Sometimes it becomes difficult to put together all the information for design criteria and all the design related formulas.

The approach made here is to continuously update the hardware and software information in the database related to a given microprocessor. This information can be accessed at any time for efficient design solution. Intel 80386 and Motorola 68020 microprocessors are …

A Study Of The Effects Of Weighting Matrices In Power System State Estimation, Yanshi Wang

Theses

The effects of weighting matrices that may be used in the Weighted Least Squares (WLS) method when applied to the problem of Power System State Estimation (PSSE) are studied. These weighting matrices include the one usually used in the literature and the one used in the utility PSSE programs

The performances of these weighting matrices are compared using the Monte Carlo simulation technique.

To test the performances of the weighting matrices, a PSSE program is developed, different performance indices for state comparison are defined, and many cases are studied.

Results show that the weighting matrix usually used in literature, 1/σ², …

Investigation Of Mixed-Made Fracture In Concrete, Stylianos C. Aniftos

Theses

This study is aimed at evaluating the failure characteristics of concrete in the notched beam configuration. In general, for Mode I failure tension is commonly encountered. However, in the area of high shear stress, it remains to be a question whether shear or Mode II failure exists. Researches carried out in the past decade confirmed the existance of both Mode I and Mode II failure. It is the objective of this investigation to clarify this failure characteristics using FRANC an interactive fracture mechanics software.

The investigation carried out in this study used the experimental results of Bazant and Pfeiffer (3) …

Design Of A Real Time Optical Sensor For Continuous Blood Cell Separation, Girish S. Yerande

Theses

For continuous measurement and display of oxygen saturation and RBC content in blood during cell separation a reflection type optical sensor is designed based on the theoretical model using the photon diffusion theory. The prototype sensor consists of two arrays of light emitting diodes, red and infrared, and photodiodes. The emission wavelength of LEDs are 660 nm and 800 nm. The 800 rim which is in the infrared region is very close to isobestic value for blood. The prototype sensor is mounted on the blood cell separator equipped with an antitwister mechanism. Each LED emits a specific wavelength of light …

Application Specific Integrated Circuits For Single Board Computer, Ximing Shi

Theses

A single board computer is the central part of many microprocessor-based instruments. The implementation of the logic portion of a single board computer using Xilinx Logic Cell Array makes the computer system more powerful. Xilinx Logic Cell Array is a new kind of Programmable Gate Array in application specific integrated circuit with high design flexibility and functional density. The XACT Development System provides schematic capture and auto place-and-route for design entry.

In this thesis, a Xilinx Logic Cell Array was developed and implemented in the 8052AH-Basic based Single Board Computer design. Also, the logic and timing verification and simulation of …

Effective Use Of Management Information Systems In Manufacturing, Bhavik Shah

Theses

Information is the catalyst of management and the ingredient that coalesces the managerial functions of planning, organizing, actuating and controlling. The implementation of management information system (MIS) provides the vehicle by which management process can be administered and integrated. Information is at the core of creative thinking, which leads to new ways of improving products, process and services to the invention of new devices and to discovery of new marketable concepts. Thus information for an organization has a dual application for internal operation and external marketing potential.

The organization studied was a small to medium sized batch manufacturer of healthcare …

Multi-Sensor System For An Articulated Robot Hand, Narendra Sucahyo

Theses

The precision and dexterity of a manipulator hand critically depends on the proper extraction and processing of sensory information. This thesis describes how a sensor system equipped with fingertip sensors and strain gauges can provide proper feedback to drive the grasp kinematics of an articulated robot hand. The grasp kinematic that provide the manipulator hand with precision and dexterity is based on impedance control. The fingertip sensors and the strain gauges are constructed of piezoresistive materials for force transduction. Through optimization, based on the sensitivity and capability of the sensors, a synergism of force and contact information can be obtained …

Shear Behavior Of Steel Fiber Reinforced Concrete Beams Under Monotonic And Cyclic Loads, June Suh

Theses

Up to now relatively few tests have been reported on shear behavior in fiber reinforced concrete beams. Even less experiments have been carried out under fatigue loading. In the present experiment, the reinforced concrete beams with 1 percent and 2 percent steel fiber volume fraction are investigated. Conventional stirrups are included in number of beams at certain intervals. Beams are loaded under monotonic and cyclic loads. The strength of beams are determined and the behavior of beams under each loading are observed in order to determine some advantages of adding steel fibers to reinforced concrete beams.

It has been found …

A Study Of Signal Cancellation Effects In Adaptive Arrays, Cheng-Der Sun

Theses

An adaptive array can automatically place pattern nulls in directions from which undesired signals (interference, jamming, or clutter, etc.) arrive and can also provide gain for a desired signal. The purpose of this study was to study the effects of the adaptive array on the desired signal while suppressing the undesired signal.

This was done by studying the transfer characteristics of the adaptive array between its input and output. In this study, C.W. jammers along with the desired signal were considered and input and output relationship of the adaptive array were determined. Several basic types of adaptive arrays were studied …

Demulsification And Separation Of Oil In A Water/Particulate System, Fong-Jung Tai

Theses

The wastewater generated from installation factories contains high suspended solids ( SS ) and oil. Effective removal of oil and clay particles in washrack wastewater can be achieved by using organic polymer TFL-398 alone or in conjunction with alum. The dissolved/emulsified oil concentration and suspended solids are used to represent the degree of oil demulsification and clay particles destabilization, respectively.

To improve the efficiency of oil demulsification and reduce the chemical consumption, pretreatment of the influent wastewater is essentially necessary. pH adjustment to 11-12 generally reduces chemical requirement. Total oil concentration was reduced significantly at pH = 11.7 without any …

Calcium Bentonite In Containment Structures, Ramnarayan K. Tirumala

Theses

Experiments were conducted on calcium bentonite from different sources to determine its suitability as a material for slurry wall. The emphasis was placed on cement-bentonite types of materials. A few tests were conducted on specimens consisting of soil-bentonite materials. Permeability, swelling potential, and immersion tests were conducted. Specimens were initially permeated with water to determine which variety of bentonite was most suitable and later with chemicals. In cement bentonite specimens, the effect of addition of blast furnace slag, fly ash, and sand were also studied. Addition of slag cement lowered the permeability value by an order of magnitude, and with …

Cad/Cam : An Analysis And Application To An Industrial Environment, Kulendu Vyas

Theses

This work is intended to explore details of CAD/CAM techniques and to check its application in medium size industry. To achieve this goal, a thorough study has been carried out on current CAD/CAM techniques, keeping in mind it's requirements, source and application, considering both the hardware and software side of it. To check application of CAD/CAM in an industrial environment, Schering Plough corporation was chosen as a subject. The main theme behind this application to the Schering Corp. was to develop the CAD/CAM capability within company, in order to gain better control over the quality and productivity, and to reduce …

Chemical Activation Analysis Of The Reaction Of Methyl, Ethyl, Propyl And Butyl Radicals With O2, Hsing-Hui Yu

Theses

The addition reactions of methyl, ethyl, propyl and butyl radicals with molecular oxygen to form the energized adducts CH3OO#, CCOO#, CCCOO#, C₂COO#, C*CCOO#, CCCCOO#, CCCOO.C#, C2CHCOO#, C₃C00#, C*CCCOO#, CC*CCOO# and C*CCOO.C# and the reactions of the adducts to varied products have been analyzed using the bimolecular version of the quantum Rice-Ramsperger-Kassel (QRRK) theory. The analysis encompassed a temperature range from 200 to 2000 K and pressures between 0.001 to 10 Atm in argon (CH₃ + O₂ reaction only), helium and nitrogen bath gases. The calculations satisfactorily explain the experimentally observed rate constants for loss …

Temperature Dependent Current-Voltage Characteristics In Thin Sio2 Films, Jin Zhao

Theses

An analysis of the Fowler-Nordheim tunneling (FNT) theory and its application to temperature dependent current-voltage characteristics, of very thin films of SiO₂ on silicon, is presented. The final results are believed to provide the most complete examination of FN emission theory and predict the breakdown electric field in thin SiO₂ films. The role of the roughness, at the Si-SiO₂ interface, in determining the FNT current and breakdown mechanisms in metal-oxide-semiconductor (MOS) structures are also discussed.

Automatic Infrared Inspection Of Solder Joints On Mounted Circuit Boards, Ken Kekuan Zhou

Theses

This thesis reports the research work on automatic infrared and visual light inspections of solder joints on printed circuit boards (PCBs) utilizing an image processing system and statistical pattern recognition techniques.

A small scale image processing system, consisting of a SUN workstation and several DATACUBE modules, is set up for the research. Software packages for imaging, displaying and solder joint inspection are developed and ready for public usage.

The capability of infrared inspection for solder joints on PCBs is demonstrated. The fusing of infrared and visual light imagery for the inspection is shown to offer better results than that obtainable …

A Comparison Of Integrated And Differential Estimates Of Flourescent Intensity Profiles Using Digital Video Image Analysis, Langfang Wu

Theses

The dynamics of macromolecular transport across microvascular walls in the hamster cheek pouch have previously been studied by other investigators using fluorescence intravital microscopy. Fluorescein Isothiocyanate labeled Dextrans (FITC-Dx) of 20,000, and 70,000 molecular weight (FITC-Dx-20 and FITC- Dx-70) were used as macromolecular probes. Values of fluorescent intensity were previously recorded on videotape as a function of distance perpendicular to leaking vessels over a period of about 2.5 hr to allow for tracer equilibration in the interstitial space. In this study, these videotapes were played back frame-by-frame and 215x130-pixel windows around each leaking vessel were selected for further analysis of …

Multiphase Solid-Liquid-Liquid Mixing In Stirred Tanks, George R. Deritter

Theses

A large number of investigations can be found in the literature which examine the effect of mixing parameters in both solid-liquid and liquid-liquid systems. However, very little is currently available for solid-liquid-liquid systems. It is the intent of this study to look at the various parameters affecting the point of complete dispersion for a liquid and the point of complete suspension for a solid phase, in a three phase liquid-liquid-solid system.

An Implementation Of Mht Algorithm For Adaptive Transform Coding Of Speech, Peter Battenschlag

Theses

The Modified Hermite Transform (MHT), a suboptimum block transform scheme, is implemented on a TMS320C25 signal processing system with the objective of reducing the redundancy in speech signals and transmit a quantized vector representation at bitrates as less as 0.5 bits per sample.

The generation of the Hermite polynomials with a binomial and several first order IIR filter structures is presented focusing on the fact that no muliplications are required which simplifies the MHT algorithm considerably.

An assembler program performs forward and inverse transformation together with a vector quantization using adaptive bitallocation based on short-time statistics for the transform coefficients. …

Three Dimensional Finite Element Analysis Of A Tibial Ankle Prosthesis, Harrison Philip Crowell Iii

Theses

In this study, three dimensional finite element analysis is used to evaluate and compare partially and fully porous coated tibial components, of an ankle prosthesis, implanted in the distal tibia. The geometry of the distal tibia is determined from measurements of cross sections of a human tibia. From the measurements, solid models of the cancellous and cortical bone are created. A solid model of the tibial component is created and positioned in the solid model of the bone. From the solid model, a finite element model is created for the partially coated case and for the fully coated case. Each …

A Micro-Based Machine Vision System, Hsueh-Chung Michael Feng

Theses

In this thesis, a low-cost general purpose machine vision system based on a personal computer of the PC-XT/AT family and an electronic camera controller based upon a Motorola 6811C11 single-chip microcontroller has been designed and implemented. This work is focused on image formation. The system supports a long distance camera-computer configuration. A picture editor, generic image manipulation software was designed and implemented. A single computer can supervise multiple cameras.

A Code Verification System For Ink Jet Printing, Daniel Liang Hsu

Theses

This paper describes system integration of a code verification system. The system utilizes a feature matching

Evaluating The Feasibility Of A Vendor Certification Program For A Mid-Sized Pharmaceutical Company, Clarice P. Johnson

Theses

To compete effectively in the global market-place of the 1990's, manufacturers and suppliers must give up the orthodox practices of the past and create more innovative, quality oriented partnerships. One way to do this is through vendor certification.

The implementation process is examined with particular emphasis upon total management involvement and commitment. A case study approach utilizes a literature search, questionnaires from a limited number of pharmaceutical companies in New Jersey, and questionnaires from primary and secondary component suppliers.

It is confirmed that the implementation of a vendor certification program is a slowly evolving process whose success is not dependent …

Adhesion Effects In Micro Mechanisms, Dennis Alan Kalgren

Theses

Dielectric resonators (DR) are suitably shaped objects made of high dielectric constant materials like TiO2, BaO, ZnO, and accessory ingredients, which can function as electrical resonators covering a very wide frequency range upto 40GHz. The physical dimensions of dielectric resonators are in mm range. High dielectric constant material resonators seem to be ideally suited for microwave applications because of their miniature size, low loss, insensitivity to magnetic dc biasing fields, and ability to concentrate large RF magnetic fields in small volumes. However temperature stabilization of dielectric resonators is an important consideration as the center frequency is a function of temperature. …

Design Of Spatial Linkages For Dwell Function Generation, Donald F. Kelly

Theses

Certain single-loop spatial linkages containing spherical pairs may be used as dwell function generators. Analysis and design of these linkages, however, may be too complex for the practicing engineer.

In this study a method is presented, where the set of link lengths representing a linkage are determined from a smaller set of design parameters. Graphical relationships are also found between the design parameters and functional requirements for dwell, such as output function amplitude and dwell range. These graphs may be used as design charts, and design becomes the calculation of link lengths from design parameters chosen to satisfy the functional …

Design Of An Ionized Cluster Beam System For Thin Film Deposition And Cluster Size Measurement, Steven K. Krommenhoek

Theses

This thesis describes a study of a unique deposition technique known as Ionized Cluster Beam (I.C.B.) deposition. According to I. Yamada and T. Takagi, the inventors of the I.C.B. concept, the beam of deposited material contains clusters as large as thousands of atoms. To study the mass distribution of the ionized species, an I.C.B. source was designed and built by the author. The design provided temperature control along the axis of the crucible by using electron beam heating with two independently controlled emission filaments. Special attention was given to minimizing the background of charged particles generated in various sections of …

Optimum Power System Planning, Youn Tae Kyong

Theses

This thesis presents analysis method of optimum power system planning. The Gauss-Seidel iteration method is used to calculate load flow data of power system. The real and reactive powers, voltage magnitude and phase angle at each bus were obtained using Gauss-Seidel iteration method for a given IEEE sample power system. The load flow calculations were repeated under 60 percentage, 70 percentage, 80 percentage, 90 percentage, 100 percentage loading condition.

The transformation of reference frames were performed to simplify given IEEE sample power system identification. The transformation of reference frame transforms real and reactive voltage, current and impedance variables(reference frame 1) …

The Effectiveness Of Computer-Based Training On Management Skills Development, Donna Lisa Leonard

Theses

This paper evaluates the impact of Computer Based Mediums on training in management skills. The research explores current literature and technology developments of training functions in organizations. The paper involves some currently used methods and examines how they apply to the traditional training function. The information source's focus mainly on future trends, professional literature, academic texts, and interviews with professionals in the field of training, Human Resources, and technology. This paper examines the problems as well as the benefits of Computer applied HR and training functions.

The objective of this presentation is to clarify the idea of computerized technology in …