Digital Commons Network^™

A Critical Analysis On Cogeneration Policy, R. Tjahjokartiko Gondokusumo

Theses

It could be difficult to understand electricity problems without knowing its history; how a combine of legal, administration, and financial means effects electricity in the development. The recent public law on energy-related issues traceable by this study is the Renewable Energy and Energy Efficiency Technology Competitiveness Act of 1989.

In short, cogeneration was proposed to utility (as public property) from industry (as private property) under PURPA (of which National Energy Act is the legislative history). Thus, it should be clear that the problems of cogeneration is not pro or contra issues. It is a national issue. Then, a cogeneration planner …

Comparative Analysis Of Single And Double Dwell Acquisition Schemes, Gurinder Singh Ahluwalia

Theses

Single and double dwell pseudonoise (PN) acquisition systems are described, explained and analyzed. These systems are designed to synchronize a locally generated PN signal with a received PN signal of unknown phase in the presence of noise. The mean, variance and an approximate probability distribution function (PDF) of the acquisition time for the single and double dwell PN acquisition schemes is developed. Intuitively, the double dwell acquisition system should be superior to the single dwell system because of the ability to quickly dismiss incorrect cells and further verify probable hits. It is shown analytically that this is in fact true …

Performance Evaluation Of Consumer Electronic Bus, Sairaj R. Pakkam

Theses

This thesis describes the performance evaluation of the Consumer Electronic Bus proposed by the Electronic Industries Association. To study the behaviour of CEBUS under different traffic conditions, a simulation program was developed modelling the layer architecture of CEBUS. The CEBUS is based on the ISO/OSI model of layered architecture. The simulation results have shown that, when the throughput of the network is small, the delay is bounded for all messages of all priorities. As the throughput of the network increases, under the presence of more high priority messages, the lower priority messages get queued at their nodes. It is also …

Scatterer Number Density Estimation For Tissue Characterization In Ultrasound Imaging, Hui Zhu

Theses

Ultrasound RF signal, backscattered from an inhomogeneous parenchymal tissue has the character of a random signal. It is the random fluctuating nature of this signal that is responsible for the speckle pattern observed in the images. These random signals, nevertheless, bear information related to the random scattering structure of the medium. Statistical moments of the signal can serve as feature parameters that are related to mean scatterer spacing in the random structure. However, such a feature is biased because the statistical nature of the RF signal depends, not only on the random tissue scattering structure, but also on the resolution …

Imagination Makes Things Perfect, Donna Lee Rollins

Theses

None provided.

Measurement Of Thermal Conductivities Of Polymer Films With The Tc-1000 Thermal Comparator, Dong Ming Li

Theses

The single-probe, direct reading thermal comparator has been used extensively to measure the thermal conductivity of bulk solids, liquids, and gases. With the use of an analytical heat flow model based on the work of Dryden1 and the work of Carslaw and Jeager2, the comparator can also be used to obtain an in-situ measurement of the thermal conductivity of a film while attached to a substrate. The purpose of this paper is to test this model by measuring the thermal conductivities of commercially available polymer films (DuPont Kapton and Teflon). The values obtained with the comparator were found to be …

Prediction Of Screener-Induced Moire In Digital Halftone Pattern Generation, Richard Comeau

Theses

In the graphic arts, objectionable moire patterns are often observed on films or printed products due to the interaction of various periodic structures of halftone images. A particular type of moire pattern that results from digital halftoning at arbitrary angles and frequencies using a virtual screen function has been studied. A computer program was developed that produces uniform digital halftone patterns using a virtual screen approach and that calculates the corresponding amplitude spectra. It was found that aliasing due to the sampling of the virtual screen causes low frequency components in the amplitude spectrum. Moire patterns with fundamental vector frequencies …

Ornamentalism, Douglas B. Prickett

Theses

None provided.

Mind States, Susan Grinols

Theses

None provided.

Halogenolyses Of Tri-Alkylborane, Qingyi Lu

Theses

None provided.

Model Reduction And Simulation Of Complex Dynamic Systems, Amit Gupta

Theses

A novel method for reducing the order of discrete time systems is developed. This model reduction technique based on Continued Fraction approach allows design parameters to be preserved. A reduced order model obtained using this technique is compared with those by other techniques to show its superiority. Furthermore, form a practical point of view, it is shown that this method can be used to design lower order digital controllers for higher order plants. Development of various model reduction techniques for continuous and discrete time systems are discussed in details and computer programs are implemented. A modified algorithm that reduces the …

Chemical Sensitization Of Tabular-Grain Emulsions In The Presence Of Sensitizing Dye, Weide Victor Yang

Theses

This thesis considers the role a spectral sensitizing dye plays in chemical sensitization for tabular-grain emulsions. Different approaches for introducing sensitizing dye have been chosen in conjunction with sulfur-thiocyanate-gold (S-SCNAu) chemical sensitization, 1. At the completion of nucleation (NUC) 2. At various precipitation completion points (pcp) a. At 35% pcp b. At 70% pcp c. At 80% pcp d. At 90% pcp e. At 100% pcp (i.e., at the beginning of Ostwald ripening) 3. Before chemical sensitization with varied digest addition sequences: Dye-SSCN- Au, Dye-SCN-S-Au 4. Conventionally: S-SCN-Au-Dye, i.e., dye introduced after chemical sensitization (control). It also considers what happens …

Investigation Of An In-Situ Method For Determining The Modulation Transfer Function And Its Applications In A Microlithographic Wafer Stepper, Steven D. Carlson

Theses

Research into characterization of wafer stepper systems has been done primarily by analyzing a series of wafer exposures. This method does not allow for easy separation of the effects of the exposure system and the resist processing system. In addition, determination of the transfer characteristics of projection lithographic lenses is typically done before the lens system is installed into the wafer stepper system. A method is presented which allows for the in-situ determination of the modulation transfer function. This method separates the processing effects from those of the exposure system. Scattered light from a polys il icon edge is shown …

Merging Panchromatic Multispectral Images For Enhanced Image Analysis, Curtis K. Munechika

Theses

This study evaluates several methods that enhance the spatial resolution of multispectral images using a finer resolution panchromatic image. The resultant hybrid, high resolution, multispectral data set has increased visible interpretation and improved classification accuracy, while preserving the radiometry of the original multispectral images. These methods can therefore be applied to create simulated high resolution multispectral data, as well as to enhance image analysis.

Improved Techniques For Bispectral Reconstruction Of Signals, Gopalakrishnan Sundaramoorthy

Theses

Higher order cumulants and spectra have found a variety of uses in many areas of digital signal processing. The third order spectrum, or bispectrum, is of specific interest to researchers because of some of its properties. The Bispectrum is defined as the fourier transform of the third order cumulant se quence for stochastic processes, and as a triple product of fourier transforms for deterministic signals. In the past, bispectral analysis has been used in applications such as identification of linear filters, quadratic phase coupling problems and detection of deviations from normality. This work is aimed at developing techniques for reconstructing …

No Guarantees, Barbara J. Tefft

Theses

None provided.

Using Drama To Teach Drug Prevention Objectives In The Tenth Grade Language Arts Classroom, Mary Jo Teets

Theses

The primary objectives of this language arts unit were (a) to show that drug prevention objectives could be integrated into the secondary language arts curriculum without taking away time allotted for regular course objectives, and (b) to show that drama was an effective teaching strategy to combine language arts and drug prevention objectives. A secondary objective was to produce a video that could be used as a drug prevention tool with junior high school students. A six day unit which was taught to sixty-two tenth grade students at Grandview R-II High School in Jefferson County, Missouri, centered around producing five …

Improving Solids Conveying In Plasticating Extruders : An Investigation Into Manufacturing Processes And Manufacturing Systems For Profiled Thermoplastic Pellets, Oommen Cherian

Theses

The objective of the thesis is the manufacture of thermoplastic bilobal and trilobal profiled pellets for the determination of the interparticulate co-efficient of friction exhibited by solid beds of such pellets. The enhancement of the interparticulate coefficient of friction is expected to lead to ameliorated solids conveying rates in plasticating extruders.

Predicting the product shape from a profile die is very difficult due to the elastic memory of plastics and the complex boundary conditions. Consequently the cost involved in experimenting with different profile dies is high. Therefore a standard die with several die inserts of varying cross-sections were used to …

Small Disturbance Stability As Affected By Excitation Controls, Alfredo Flores

Theses

The effect of excitation control systems on the power system's small disturbance stability limits has been investigated in this thesis. Three excitation control schemes namely the proportional, fast?acting and the modified fast?acting have been studied.

The stability results were predicted directly in terms of the AVR gain controlling parameters following one?dimensional and two?dimensional frequency domain separation technique. The necessary algorithms and computer simulation programs have been developed.

In case of a modified fast?acting excitation control with three unknown variables, a procedure has been proposed to obtain the stability results by extending the two?dimensional frequency domain separation technique.

Effect Of Moisture On Microcircuit Failure, Chandrabala D. Patel

Theses

Stability and reliability of microcircuit is dependent on its design, fabrication, testing, storage and use.

In this thesis emphasis is given on various failure mechanisms of Integrated Circuits in humid environment and techniques of improving reliability. Other factors which affect the failure of integrated circuits are also discussed. Moisture induced failure modes, semi-reversible failures and irreversible failures (surface leakage current and corrosion-causing interruption of interconnection lines) are also reviewed.

Controlling the contaminants and moisture related corrosion are also covered. The quickest way to evaluate the reliability of microcircuit is by accelerated aging test and by selection of meaningful criteria of …

Preparation Of A Bank Of Cloned Genes From The Chromosome Of Agrobacterium Tumefaciens And The Isolation Of Genes Involved In Dna Repair And Genetic Recombination, Geoffrey A. Bartholomeusz

Theses

The virulent property of the Agrobacterium tumefaciens is associated with its tumor inducing (Ti) plasmid. Recent studies on the virulence of this bacterium has shown that genes located on its chromosome also contribute to this property. One such gene is thought to produce a protein that has properties similar to that of the recA protein of E. colt. This thesis outlines the techniques that were used to try and isolate the recA-like gene from the chromosome of the Agrobacterium tumefaciens. All the techniques used in this study are outlined in detail and an explanation given for the choice of each …

The Influence Of The Position Of A Color Control Bar On A Form When Determining The Most Appropriate Location To Measure Variability In Solid Ink Density And Dot Gain Of A Printed Product, Kevin B. Leines

Theses

This study proposed to determine the most appropriate place to measure variability in dot gain and solid ink density on a form using color control bars. The study developed a form that entailed three GATF/SWOP, 133 line color control bars placed strategically at the lead, middle and trail edges of the sheet. The test set specific density standards to control to, and while these densities were being controlled, samples were obtained that represented a typical press run. Each of the control bar set-ups was treated as a separate press run, allowing the press operator to change the set densities to …

A Study Of The Accuracy Of Reproduction Of Measured Photography: A Method To Equate The Tonal Range Of The Color Transparency To The Tonal Of The Photomechanical Reproduction, Michael Grant Scala

Theses

The density range of a color transparency greatly exceeds the density range capacity of reproductions with ink on paper. It is therfore necessary to perform tone compression. Traditionally, tone compression is accomplished by the color separator and involves subjective decisions without input from the photographer. Tone reproduction of the final image is a result of image manipulation by different people in production who are not in communication with each other. Consequently, image quality may suffer and important image detail may be lost as a result of improper estimates.

Correlation Of Finite Element And Experimental Eigenvectors, Derek J. Krebs

Theses

A technique for correlating a complex structure's finite element eigenvectors with its respective experimental eigenvectors is presented. The technique provides a quantitative comparison of the finite element and experimental eigenvectors by using a reduced finite element mass matrix in a "cross" orthogonality check. Comparisons of two case studies are presented: a thin plate with motion in the Z-direction only and a 3-dimensional table structure with motion in three principal coordinate directions . Along with the orthogonality check, the difference in the eigenvectors is computed and shown graphically. The orthogonality check between the finite element and experimental eigenvectors can serve as …

Statistical Process Control For High Precision Deep Drawn Sheet Metal Parts, Sunil S. Shah

Theses

In today's world, industrial expertise has come to be judged in terms of the quality of the product. Good quality has become the ultimate aim in a manufacturing environment, which leads to many innovations for ease in the inspection of parts. In considering a metal working company like Hudson Tool & Die Company, a study of the various operations and the application of Statistical Process Control to the forming operations is performed using STORM software. Important characteristics have been carefully studied with regards to metal forming like uniform metal thickness, radius of the bend, depth of the drawing operation. In-depth …

Outplacement Services : A Search For The Tools And Strategies That Improve Organizational Effectiveness, Geri P. Stowers

Theses

If outplacement is considered a necessity in this age of continuous mergers, acquisitions, and downsizing, then why do most companies find it difficult to utilize these services for all employees?

This thesis will assess previous research on outplacement and evaluate the reasons for limited use. A four page questionnaire containing nineteen questions was mailed to forty-two pharmaceutical and related industries. The survey questions focused on why and how these industries utilize outplacement services. A comparison study was done of the research versus what the pharmaceutical industries are actually practicing.

The results of the study revealed that most companies really do …

An Adaptive Robotic Controller With High Robustness, Xiao-Tian Wen

Theses

A complex industrial application of robotic manipulators are beyond the capability of the relatively simple constant gain linear control system. They compensate poorly for nonlinear dynamic model and environment changes, especially when the plant model comes with the unknown coefficients. An adaptive controller for a two joints robotic arm is designed in this thesis. Firstly, the highly coupled nonlinear model is linearized, and then an adaptive regulator is employed which adjust the controller parameters directly based on the on-line parameter estimation, where a least square identification is used. At last the computer simulation is also performed.

Computer-Aided Planning For Automatic Assembly Of Printed Circuit Boards, Qin Xiang

Theses

A study of printed circuit board assembly in the context of process planning and optimization of assembly motion is presented. A knowledge-based system is developed utilizing software packages VP-Expert, dBase 3 for the Universal automatic assembly machines. The planning of time-optimal assembly motion falls into the travelling salesman problem whose solution is obtained using a composite algorithm. Branch-and-bound algorithm is also discussed for solving the travelling salesman problem.

Modeling Packed Bed Catalytic Reactors, Jing Yang

Theses

Catalytic reactors provide a potentially important tool in the control of process emissions to the environment. This work provides a detailed chemical/physical model for analysing the operational characteristics of packed bed catalytic reactors. Mass, momentum, and energy conservation equations are written for the gas and solid phases. Heterogeneous and homogeneous reactions are used to convey the required stoichiometry, reaction rate, and heat release rate. Reaction in each phase is modeled as a one-step, global reaction. Heat and mass transfer, fluid friction, and axial heat conduction in the solid phase are modeled using suitable literature correlations. The resulting non-linear, first-order differential …

An Investigation Of The Dynamics Of Abrasive Waterjet Formation, Md. Ekramul Hasan Khan

Theses

The aim of this research was to investigate the jet formation and the jet behavior, as characterized by the velocity field, the force exerted by the jet on a work-piece and the jet geometry. The velocity and force distributions were measured using a laser transit anemometer (LTA) and a piezoelectric force transducer (PFT) respectively for constant water pressure (334.6 MPa) supply. The jet structure and its instantaneous behavior were visualized by the used of high speed filming. LTA and PFT measuring techniques were established and verified. The measurements were performed under different operating conditions. It was found that at a …